Counting matching models…
Plug/Cover to block debris from getting inside the hole at the bottom of the rail for the bed. You'll need to print 4 of them (2 for each side). Was just looking to grab a hair more clearance so I trimmed 1.25mm off the top of the model…
This remix of piuLAB's bottle opener removes the need for the insert on the original. I've also added a hole on the end of the handle so you can hang it on a hook and a spot for an 8x3mm magnet if sticking to the frig is more your speed.…
I noticed some of the adapter models for the 4-in-1 PTFE adapter from Bambu Lab was for the adapter from the A1 which doesnt have the small mounting tab sticking up (used to mount adapter to the P1P frame). Problem is when trying to mount…
Just a quick and simple, low material use bracket to hold Nitrile glove box
Just a simple Happy Easter door corner topper for the holiday. Model is 4mm thick but scalable as needed for the most part. Enjoy
St Patrick's Day door corner topper to add some decorations around for the holiday. One profile of this model is setup as staggered layers in order to make it color printable without AMS, just add a pause to swap colors at the respective…
Recreated the Nissan Sunny [Sentra] logo emblem so I could use it on a bunch of other projects. Its not any specific size so adjust how you want it.
A lot of X and P series owners like me have complained about rattle noise during fast prints and heavy vibration. If you haven't looked at the part cooling fan in the hot end cover yet, check and see if the screws that hold the fan in are…
Update - I added a press fit cap to plug the adapter, wont work for the flange. Update - I added a 3in angled flange now. One is 120mm to 3in flange and the other "_small" I shrunk the 120mm mounting side to save material if you aren't…
A cute simple Happy Easter door corner topper that is a 2 color print by layer height stl. In your slicer start with base color white (for the first 3mm) and swap to black after its done printing the eggs (for the last 1mm) to make…
After uploading the logo only I figured I'd make it in to a key chain.
This is just the Acura text from the logo. I saw the Logo was on here, but not the text and had it from a project for a friend I did and figured I'd upload it. THE LETTERS ARE ALL SEPARATE PIECES
This is just a hanger for the 3in duct you can get off Amazon. I wanted to run my duct along my ceiling to the window and needed a way to hang it. Pretty simple, does the trick. I used .3 layer height with 10% infill to save on material…
Drop this little sign on your printer so others keep their hands off or on your desk to remind yourself there is a print in progress. It is simple print in place and then just fold in half and lock the arm in place. The color change can…
I liked Zormis's telescoping back scratcher [on thingiverse] but even at 100% infill after a couple uses the small [threaded] sleeve would break from being too thin. This lead me to preferring the bigger more sturdy telescopic back…
CR10 v2 tool tray, attaches using T nuts. I modified my first version it to be flush with the rail sizing putting the T nuts in the center for aesthetics, but also made it slightly thinner as well. VERSION 2 This version I extended 2 of…
This is a very quick mount I threw together in order to mount my Creality Air Assist pump for my CR Laser Falcon underneath a table where my laser is located. Basically this allows me to hover the pump over the laser. Super basic, I may…
Here's another quick badge I made to go with the rest of my Nissan series stuff. NEO VVL for the SR20VE guys. Prints as one piece, no supports. Infill is up to you.
NOTE I've noticed the design might need slightly upscaled due to the inserts/studs not being as tight in the hot end bracket as it is in the printed bracket (you can see this in my picture how the bracket is slightly tilted.) My…
I remixed the P1P iPhone mount (i dont have an iPhone) for use with a hot shoe universal phone holder I did have. This allows me to use any phone or pretty much anything that uses a hot shoe mount. A more universal option. This was also…
I'm not sure what all vehicles use this same firewall grommet, but it was made for my fwd SR20 Nissan's as they all use the same one. So I deleted the A/C in my Sentra/NX2000 and pulled the high and low pressure lines. I then pulled the…
The following changes were made: *End pocket was slightly widened. Originally I wanted to widen it enough to fit the "nozzle clog needle" case in there, but I dont think there would have been enough room without it hitting into the spot…
This is a wall (or desk) rack I made for the 4oz Speedball Fabric Screen Printing Ink Starter Set https://www.amazon.com/gp/product/B07GFTHXFV/ Cut outs make it easy to see what is in what slot and saves material. You could probably get…
The Problem: I'm under the assumption most of these lid risers for the AMS only work with P series printers using the official enclosure (P1S) that have a sort of lip at the top of the panels that “wedges” these risers in place. However,…
I wanted a way to store the Printing Adhesive that came with my P1P on my Bu Faceplate Slot Insert instead of the glue stick which I dont have. I also added slots in the side for storing the included allen wrenches (either side).
WORK IN PROGRESS I just made this base in order to get the ball rolling for others to take and remix some idea including myself eventually. Its just a piece that fits in the bottom of the Echo Auto mounting cut out. It has spots to insert…
Lack table snap on leg holder for to hold tape or other things.
If your P11 is like mine the reflective material flakes off the edges of the rear view. I also wanted to use a windshield mounting auto dimming rear view with the built in compass/temperature display. Instead of leaving an open in the…
UPDATE I added a version 2 that's actually the exactly the same just +.1mm longer for (hopefuly) a tighter press fit although I have no tested it yet, so let me know. I also put a slight fillet on the edges I made a tool organizer that…
Bed Handle for my Maker Select v2
Snaps on to Lack Table leg and hold 1.5oz hair spray can.
This is a block off plate (or template for someone to make one out of metal if preferred) when doing an auto to manual transmission swap. This particular design is for the Nissan B13/B14 90s Sentra/200sx/NX....etc. Probably should work…
Happy Spring time bumpin' bunnies among colorful spring flowers decor for your door frame. Change up the colors and share what color combinations you've printed. The model is facedown on bed, 8 colors for AMS. Its 4mm thick with 2mm of…
Maker Select v2 Z axis motor. camera mount. This mount puts the camera behind the extruder allowing a better view as the cooling fan wont be blocking the nozzle view like other mounts might. Prototyping [picture] was printed at .24, but I…
Screen cover to include a cut out for Shielded Stop Button.
These are all currently available results.
