Bambu Lab Bed Rail Base Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Covers the bed rail base hole so debris doesnt get in to it when you don't need to use entire bed travel distance.
- Rating
- 5 / 5
- Likes
- 48
- Downloads
- 361
- Makes
- 3
- Views
- 1,180
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Plug/Cover to block debris from getting inside the hole at the bottom of the rail for the bed. You'll need to print 4 of them (2 for each side).
Was just looking to grab a hair more clearance so I trimmed 1.25mm off the top of the model to make it slightly thinner (2mm vs 0.75mm, you can see the difference in the second picture). Credit to clselee.tw for the great model!
*Note: When the bed is fully in the bottom position the bearings on the rails slide in to these holes, so just make mental note to remove them if you plan to print with the full range of the Z axis