Counting matching models…
I continue to develop the theme of compact chess. Now only the frame, the silhouette remained from the figures. Of course, there were similar decisions, but I did not see any options where the figures are placed inside the others. The…
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for one variant
Usually when printing objects they talk about walls and filling, but I made a structure without walls, without filling, and also without a bottom and a cover. There are only bridges that connect and lean on each other. The peculiarity of…
Printing time is about 22 minutes with a layer of 0.2. This is enough to create the effect, but you can print smoother too - 0.1. On my photos and videos, printing was carried out with a thickness of 0.2. Any opaque plastic can be used…
The set includes chess pieces and a playing field. For maximum compactness, all parts are placed one inside another. This is similar to the principle of nesting dolls or stacked chairs. I did similar projects before, but here for the…
I have seen several models that used the principle of a spiral (and even made similar ones myself), but they are not strong and stable enough. Therefore, I decided to use not 1 spiral and connection, but 8 spirals and 8 mounts. Lamp…
Printing time is about 22 minutes with a layer of 0.2. This is enough to create the effect, but you can print smoother too - 0.1. On my photos and videos, printing was carried out with a thickness of 0.2. Any opaque plastic can be used…
This is a project of a fluffy lamp that resembles sheep's wool. The filament structure and the translucent material combine with cold light to create the effect of an icy surface, so I decided to name this design Polar Sheep. The…
This is a Christmas decoration that I created to easily and fast print to a 3D printer. A small relief makes it possible to create a simple animation with a star and other figures. Print instructions Supports: No Resolution: 0.1 (or less)…
A special feature of this stand card is the absence of mechanical hinges. They are replaced by a composite of two types of plastic. This allowed us to achieve the minimum thickness and print time (30 minutes). The stand is convenient to…
For fast printing of large objects, thin-walled models or "spiral vase" printing are often used. This method has a drawback - a large surface requires uniform heating and sometimes deforms: it bends in large waves. If the wall is even,…
I already made a lamp using the principle of a spiral , but this time the lines are straight, they intersect and create a retro image of an old engineering structure. To create a lampshade, you need to print two copies of the model and…
A mobile plastic road barrier common in Russia. The model is on a scale of 1:10 (the picture shows the models printed 1:43). When printing on a scale of 1:43, the best way to print using fill in 0. Is in this case the inside is empty, as…
I liked @SHR3Deu's original model but wanted to reshape the hood and bottom. It still prints without supports. And now the excavator has an exhaust pipe :)
In a new way of laying the threads, I was able to reproduce the texture of the bird feathers. I myself do not fully understand what creates such a pulsating pattern: perhaps this is a trace from the operation of a stepper motor, or maybe…
After some experiments, I reached the opportunity to make lenticular lenses on the printer. My experiments have shown the possibility of stereoscopic and variable images. There are many programs for preparing stereo-vario pictures.…
This time I decided to work not with the form or structure, but with the surface. It was important for me to find out how light is reflected and control its movement. To do this, I formed a surface from small pixels. Each flake is located…
The most common modular concrete fence in the USSR and Russia, which became a visual symbol and brought fame to its author - Boris Lakhman. File in scale 1:100. Print instructions Supports: No Resolution: 0.2 Infill: 30 Notes: For greater…
Photos do not convey the effect of holographic 3D printing much, watch it in the video: This time I decided to work not with the form or structure, but with the surface. It was important for me to find out how light is reflected and…
This is a trick, an optical illusion: when the cage is rotated, the bird disappears and appears. The part is completely flat and printed with the same material. Print instructions I made two versions: one for a larger size (95 mm) and a…
It is an easy-to-print and easy-to-use daily pill organizer. A feature of the project is the inclined shape of the case, which helps to take out the tablets and makes it easy and reliable to close the lid. For even more ease of taking out…
A special feature of this stand card is the absence of mechanical hinges. They are replaced by a composite of two types of plastic. This made it possible to achieve the minimum thickness, print time (25 minutes) and plastic consumption…
Simple spool holder for Prusa Mini+ (and similar). They sent me a wound plastic that protruded beyond the coil and I could not use the standard coil stand. Those models of holders that I found seemed to me too complicated (and requiring…
After a long search, I managed to make a 3D printed stereography sample. The three-dimensional cube can rotate when you rotate the position of the observer, light source or object. This project is inspired by the work of the Russian…
This is a project of a small and simple rotating table with a motor. It is easy and quick to assemble. Only two printed parts are required, as well as a motor and an engine speed controller. As a power source, just charging from a…
This device increases the area of the LED matrix by 4 times. My idea is to use an expanding light separator. If you print it from a translucent material (and my silver plastic turned out to be a little translucent), then the image…
My new project in the field of optical illusions is the animated sculpture “The Apple of Discord”. On the counter-form, one can see people's faces, as in an old illusion with a vase from Danish psychologist Edgar Rubin. But unlike her,…
This is a simple children's ring, medallions and a pendant in the form of hearts with holographic animation (yes, my daughter loved it!). The video shows how hearts "pound": I decided to use the holographic principle that I showed in…
The continuation of my optical searches - 3D printed “holographic” images, which arise due to a slight displacement of the linear structure. Although we see the relief, the object itself, unlike lithophany, has no protrusions and dents. I…
I have developed (and possibly pushed to the limit) my ideas for compact chess that I have published before, in particular the CastleChess set . In the new project, a small box contains everything you need to play. And the kit is…
Ultra thin and minimalist bookmark & phone stand. Very short print time (13 minutes) and plastic consumption (2.87 grams). Stand convenient to carry - especially if you like to read. The stand allows you to slightly adjust the angle of…
About two years ago, I created the technology and tested a linear 3D raster animation. Of course, I decided to use the famous photographs of Maybridge. In this model, three phases (frames) can be distinguished. I think that at least 4…
I recalled my favorite childhood games and made an analogue of table football. In that old version, springs were used to fasten players. I decided that an elastic cord could replace them. Like on real football, I placed the logo on board…
The set includes chess pieces and a playing field. For compactness, the parts are placed inside one another. This is similar to the principle of nesting dolls. I made holes with recognizable images of chess pieces; if you like, you can…
The continuation of my optical searches - 3D printed “holographic” images, which arise due to a slight displacement of the linear structure. Although we see the relief, the object itself, unlike lithophany, has no protrusions and dents. I…
Needed parts: 4 M3x12 screws Depending on the height of the installation site, the housing can be positioned sideways, horizontally or upside down. In my case, the legs of the machine are short and it is more convenient to connect the…
These are simple earrings and a ring. But with a holographic surface, the illusion of turning blocks-cubes is created. The video shows it better: I again used the holographic principle that I showed in previous projects Vasarelli, Pulse…
The continuation of my optical searches - 3D printed “holographic” images, which arise due to a slight displacement of the linear structure. Although we see the relief, the object itself, unlike lithophany, has no protrusions and dents. I…
This is a children's mug with Loch Ness Monster that peeks out from under the water (as well as milk or juice). Unlike adults, children love monsters and drink from such a mug, I hope they will have fun. This project was helped by the…
The game involves 21 chips (with numbers from 0 to 5) or 28 (from 0 to 6) or more. Game rules ( first version) The players take out five chips from an opaque bag or box and lay them out in front of them without showing the opponent. The…
My Sides project is a bit similar to the 3D version of Tic Tac Toe, but it has an important difference: each cube is painted in three colors, which makes the game more versatile and gives a new experience. 2 or 3 participants can play.…
I've seen several Photon Mono adapters for Wash & Cure, but I didn't feel like twisting and unscrewing the mount every time, and I also wanted to use the metal bracket that came with the kit rather than throw it away. The difference with…
The first result of my research - full 3D printing of animated lenses. For printing, you need only one transparent plastic and one extruder. No post-press procedures are required. The image arises and changes due to the optical properties…
These are a few small changes to the great design of @LMaker. I removed a small portion of some parts, which speeds up printing and reduces the amount of plastic. In addition, ventilation has now become better - a couple of ventilation…
This is an add-on to my game of Tic Tac Rocket . Now you can play tic-tac-toe in 3D: put your stars (crosses) and planets (circles) on top of the opponent's pieces, securely occupy cells with missiles, neutralize other people's moves. You…
I recommend a slightly flexible plastic such as PETG. Print without supports. It is worth increasing the number of walls, lower and upper layers and with a filling of at least 30%.
I made another version of the field for a compact chess set. Here, as in previous projects, everything needed for the game is collected in a small volume and the kit is completely printed on a printer. In this chess, as in the previous…
I made this set based on the famous chess of Josef Hartwig. But unlike his project, here chess pieces are placed one inside the other. This is similar to the principle of nesting dolls. I retained the basic designations of the Bauhaus…
I trimmed down the original hackemag model a bit to reduce print time and material, and also made a mount for the OpenBuilds 2020 profile. The result is a thin, slim design that illuminates the surface below. Use 4 small M3 screws (6mm)…
I made this set based on Lanier Graham chess. But unlike his project, here chess pieces are placed one inside the other like boxes. This is similar to the principle of nesting dolls. I have retained the basic shapes of figures whose…
This mod for KP3s 3.0 strengthens the cable connection of the heated table and at the same time helps to install PEI (or other) magnetic sheets. You will need two screws with nuts M3x12 and two M3x10. It is better to use M3 caged square…
I made this separator as a solution for coils where some plastic remained. It is suitable for internal diameters from 8 to 11 cm (approximately) and is printed very simply and quickly. The last photo shows several prototypes that I made…
Simple feet for the ZK-MT21 amplifier. No screws or glue required. Printing without support. PETG plastic is slightly flexible—the feet can be slightly bent to secure them to the amplifier body. The front and rear supports are slightly…
Like everything, this cover blocks out the light at night when you sleep in the same room. The difference is that usually such light blockers are a blank cover. My version allows you to observe the information on the display without…
This is my daughter Katya's idea. She took the parts of the Tic Tac Rocket game and began to use them as parts of the construction set. It turns out that you can make a lot of different figures. This is a good option if the RocketBlocked…
I designed this bird feeder together with my friend Aelita Zhuma ( Instagram , Facebook ), it is her initiative and creativity. It has been tested and works well for feeding small birds; large birds will not be able to sit on the edge.…
Minimalist IKEA Halvklart LED mount for Prusa Mini. Printing time from 20 to 30 minutes depending on the settings. No additional fasteners are required, you just need to remove the protection from the adhesive layer of the lamp and stick…
You'll need to print one part (it prints without support) and one M3x12 (or slightly smaller) screw and nut. There's a hole in the inside of the part. To ensure proper printing, I left a single layer of membrane, which is easily removed…
This is a very simple bracket for mounting the CNC 3018 control board, which reduces the transmission of vibration from the machine. In addition, a driver cooling fan and an offline control controller are mounted on it. The board is…
This is an old remote control, and its cover was missing. I made a replacement model; perhaps someone will find it useful. Printed without supports. I added fuzzy skin with a thickness of 0.04 and a spacing of 0.1 for a nice textured…
This mod for the KP3s Pro strengthens the hotbed cable connection and simultaneously helps install magnetic PEI sheets (or other types). You'll need two M3x8 screws and nuts. You'll also need access to the screws underneath the magnetic…
These are all currently available results.
