Counting matching models…
This is a drop in replacement for the stock K1 extruder to fix underextrusion and add a tensioner. I do recommend replacing the extruder if your machine is still under warranty. With no long term testing, I cannot speak to the longevity…
Discord: https://discord.gg/kHFhCXZnxb GitHub: https://github.com/Rolls17/BugBu Print parts as oriented. Part description will tell you quantity and if supports are needed. All parts designed for 0.2mm layer height, 6 walls minimum, and…
This has built in supports. Print as oriented and no supports. Lid is designed to use 120mm Fan.
The BugBu 260 has a printable area of 235x235x300 unless you slap on a Bambu build plate, then you get 260x250x300 build volume. This uses a cantilever bed to eliminate the closed loop belt system. All part are printed at 6 walls and 20%…
This is an upsized version of the BugBu 210 that uses an ender CR-10 24v heated bed, and gives a printable area of approximately 310x300x310. Just like the smaller version, this is a work in progress. This larger printer does require…
This case is designed to attach to 2020 extrusion through the back using 2 m5x10 and t-nuts. The lid is fastened with 4 m3x10 (or 8, 12, &16) screwed into the plastic. There are two lids to pick from, one that uses a single 80mm fan, or…
This is for 1up arcade cabinets to replace the ball control knob to a more authentic knob of classic arcades. Print Settings Printer: Adimlab Prusa I3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Solutech PLA Notes: I used…
I thought the Assassins Knives on Thingiverse were so cool, and I saw some people doing frames, but no one had the stl for them, so I made one myself. This is designed to be a simple manual color swap using layer pause, and can be thrown…
NOTE: Z Rotation Distance Will Need Changed From 8 to 13.1 For This Mod In The Config This mod will convert your BugBu 210 or 260 to a belt driven bed instead of triple lead screw driven. This mod will use all of the existing non printed…
Basic wire protection cover for the Meanwell 350 PSU
Printed at 0.2 layers with 10% infill, no supports. While intended as a test print for the BugBu printer, feel free to try it on anything.
If you don't want the loose power switch box in the files, you can use the foot. It will replace one back foot, and you can install your switch in the foot. There is a cover as well so electrical connections are not exposed.
This mod is ONLY for the 310 version of the BugBu. Just replace the same name parts from the BugBu 310 list with these parts to go tall. You will also need 2 - MGN12 linear rails for this mod. The linear rails will need to be 50mm shorter…
This is my little paint pallet for painting figurines. Print Settings Printer: Adimlab Prusa I3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Solutech PLA Notes: I only wrapped it in the plastic seen in the picture to try…
This is a E3d V6 mount for the Adimlab pinter which still keeps it compatible with the Cobra Cooler. This mount uses 2 - M4x20 nuts and bolts to attached to the carriage, 1 - M4x25 for attaching the extruder, and 1 - M3x10 for securing…
Simple Kleenex box. Print with just 2 walls and maybe 10% infill. Print as oriented, no supports
Just a simple UBL bracket for the Adimlab. Print Settings Printer: Adimlab Rafts: No Supports: No Resolution: 0.2 Infill: 100 Filament: Solutech PLA Black Notes: Nothing really special needed on this, just print and mount. Category: 3D…
Top and Bottom Gantry braces for the Adimlab Print Settings Printer: Adimlab Rafts: No Supports: No Resolution: 0.2 Infill: 30% Filament: Solutech PLA blue Notes: This uses 2 - 24 inch x 1/4 inch allthread rods and 8 nuts. The bottom…
This is a bracket to mount a dual drive BMG extruder on the existing carriage for the large adimlab printer Print Settings Printer: Adimlab Rafts: No Supports: No Resolution: 0.2 Infill: 30 Filament: Solutech PLA Black Notes: This bracket…
This is the part cooler and radiator cooler for the dual driver extruder with all metal E3D V6 hotend. Print Settings Printer: Adimlab Rafts: No Supports: Yes Resolution: 0.2 Filament: Solutech PLA Black Notes: Use tree supports in CURA…
This is a setup done by and information provided by Joshua Waite that I am uploading with his permission. This setup will convert the adimlab dual z to a single z. Print Settings Printer: Adimlab Rafts: No Supports: Yes Resolution: 0.2…
These are all currently available results.
