Counting matching models…
I was looking for a nice guitar stand and came across the model by Brian R (https://www.printables.com/model/416291-guitar-stand), but after printing it, i noticed that it does not provide enough clearance for my fancy latching strap…
I found several existing mounts for the Focusrite Scarlett Solo (3rd Gen), but all of them had some fancy locking mechanism and/or required supports to print properly. More importantly, it looked like all of them were too close to the…
These are the same parts as provided by the “official” Prusacaster model, just with 4.7mm diameter holes added at the supposedly optimal locations for guitar strap buttons. The seemingly strange diameter of 4.7mm is simply so that…
When i saw the original Prusacaster , i immediately ordered the hardware kit from Thomann and started printing the core piece that accepts the bridge and pickup, but when the kit arrived, none of the holes aligned with the printed…
SAMLA HANGA is a hanger for the very popular IKEA SAMLA storage boxes, allowing you to store 4-5 spools of filament without any screwing or drilling. It is based on "IKEA Samla box as Filament Storage" by Gnevko, but doesn't limit you to…
The first thing i did after ordering my Volcano Hybrid was searching for any storage solutions that not only protect the device itself, but also keep all accesories within reach. As the famous “Volcano Case” by Vaporizeit isn't available…
This handle uses a neck clamp that can be installed without removing the valve and should be sturdy enough for any size of tank - if you print it strong enough. The recommended material would be PETG, but ABS and any other similar…
I recently printed my first spinners and didn't like any of the bearing caps, except for the cap that's included in thing:1871997, as it has a nice indentation that keeps your finger tip centered. Unfortunately it could only be used on…
This is a mount / juction box for HView PoE Dome Security Cameras like the HV-500E6 (5MP) or HV-E800D (8MP) . It was designed to be able to mount the camera to a wall without drilling, by using double-sided adhesive tape, and to hide the…
This is a case for a DIY PiKVM V2 stack using a Raspberry Pi Zero 2 W, a C790 HDMI-to-CSI adapter board and a 0.96" OLED Screen HAT (see photos), held together by a couple of M2.5 standoff and bolts. The only ports exposed are HDMI, OTG…
All antenna connectors and ports are exposed, only the microSD card is not accessible without disassembly (which isn't typically required, as it can be accessed via USB). Hardware required: 4 * M2x6 SHCS (top half) 4 * M2x8 SHCS (bottom…
If you've collected a wide variety of banger or heads for your dab rig/bong/waterpipe and want to organize them, these Gridfinity blocks are here to help. They are available for SG14/NS14 and SG19/NS19 cuts, which should cover the…
The idea behind this case was to create something minimal, sturdy and without any fasteners. The T-Beam is aligned with the case through the use of a brace below the PCB, which locks it into place on the mounts so that there's no sliding…
These Gridfinity blocks allow you to organize your Dynavap vaporizer(s), or anything with a SG10/NS10 cut - although this has not been tested. There's technically no reason for the tapered block, it just fits better with my Gridfinity…
The MiniSpin is a minimalistic spinner fidget for 608 bearings without any fancy features - except for rounded edges that don't tear up your fingers, a smooth inner curve that just feels nice when continuously flicking it, and a fine…
Use this badge to label any storage / transport cases you use for your Storz & Bickel Volcano. It has a recess of 1mm on the back, so any double-sided tape with a thickness of 1.1mm (like 3M VHB 5952) will work very well. I used an SVG of…
For more information, see https://growsm.art/docs/components/growsmart-leaf
This mount allows you to position a Berotec CUMPAN below the instruments of a KTM 690 SMC R (2019), possibly also other models. It raises the CUMPAN to the same level as the display and provides solid contact with both the triple clamp…
For more information, see https://growsm.art/docs/components/growsmart-air
For more information, see https://growsm.art/docs/components/growsmart-core
If you're also waiting for the SSG11 skeletonized stock grip panels to mount your split bipod, or anything with M-LOK, you can print these panels as a temporary solution. They're of course not as stiff as the original CNC ones, but at…
A simple drainer for Grodan (or any other) 4x4 rockwool cubes that allows all water to drain out of the bottom of the cube, so that any excess water doesn't lead to damping off of your seedling. It also prevents the taproot from being…
For more information, see https://growsm.art/docs/components/growsmart-hub
The STACK-A-LACK is an adapter to stack IKEA LACK tables on top of each other. No screwing, no glueing, just stacking. It wasn't designed to be very sturdy, but it should keep the top table from sliding off. There is also the…
This is a remix of the nice 3-rod baffle included in Marci's Hadley Telescope M4 Heat Insert Remix , which adds a small cutout at the top so that the Double Dovetail Finderscope Mount can be used as intended.
These braces are mounted with T-nuts onto the 2020 extrusion into the corners of the enclosure, and then you can place your CNC router's feets into the holes of the braces. Your CNC router will be centered, and you can even (carefully)…
Ultimute - The Ultimate Mute Button is... well, the ultimate mute button. After over a year in home office and countless video conferences, i got tired of always having to switch windows/tabs and then find the mute/unmute button of the…
I don't like the look of wood handles for ball vape heater coils, so i ordered mine without a handle and just designed a nice roundish (but not completely round) handle myself. This fits heating coils with a 8/9mm metal tube (see photo).…
This adapter plate for the HTC Vive Base Stations allows you to mount the base stations onto a 16mm spigot, commonly found on light stands/tripods, by using the included wall mounts. You can use the included M5 screws and nuts to attach…
For more information, see https://growsm.art/docs/components/growsmart-water
This is a redesign of the “PRO FLASH MOUNT” for the GOODMAN ZONE, which now fits a SMALLRIGH Cold Shoe 1241 properly, and also still has the bubble level. The Sides have also been shortened a bit, so that you can pass bungee cord from the…
For more information, see https://growsm.art/docs/components/growsmart-control
For more information, see https://growsm.art/docs/components/growsmart-dosing
While building my GOODMAN Zone, i found out that the DeWalt TLM30 Laser Rangefinder, which is mentioned and shown all over the project, and for which a mount is provided, is now End-Of-Life and has been replaced with the DeWalt TLM40 -…
For more information, see https://growsm.art/docs/components/growsmart-level
I rebuilt the clamp and screw for the "Universal HTC Vive Desk Mount" because i wasn't able to print them without fusing together, which resulted in a screw that wouldn't turn. These parts are now all separated, so after printing them you…
The probably quietest, yet still powerful oscillating fan, the Iris Ohyama Woozoo PCF-SM12 , has one major flow: you can only use it standing on the floor. As i wanted to use this fan in my grow box, i needed some way of mounting it…
Here's the problem with Maglites: they last a lifetime - contrary to the batteries you put into them. As i recently discovered, cheapo D-cell batteries definitely have a lifetime much shorter than Maglites. Not 25 years (which is roughly…
While there are plenty of TRMNL stands and cases, i wanted something that i can hook into the slots of an IKEA SKADIS panel, and also attach any other kind of mount i come up with. The USB-C port, power switch and all buttons are…
This bracket allows you to attach your HTC Vive VR goggles to the Miller Electric 256174 headgear for welding masks. It is a remix of Thing:1620362 by nw15062. The original model's surfaces didn't quite align for the first layer,…
I'm not sure what's so different about the Disco on a XXL Stick PCB from Lab4450, but none of the other baffles available on here seem to fit - so i created my own version. They're a bit oversized because i first thought i'll create a…
The CINEZONE by Dora Goodman for the GOODMAN ZONE is supposed to be mounted with magnets and M3 bolts, which unfortunately don't provide that much stability as their contact surface is between two parts. These brackets improve the…
I recently migrated to Home Assistant, and after discovering the Voice Assistant possibilities, i designed this case to nicely package a Raspberry Pi Zero 2 W with a Keyestudios ReSpeaker 2-mic Hat and a 3W speaker. The idea behind the…
This is a case for the Bob Cassette Rewinder ( https://github.com/dekuNukem/bob_cassette_rewinder ). The original case by telekineticyeti ( https://www.thingiverse.com/thing:4840829 ) didn't quite fit my rewinder board and also felt a bit…
I wanted to keep the beeper in my Armattan Chameleon build as safe as possible, and not just dangling around somewhere between other parts. This design takes rnelias's beautiful camera cage bumper and just adds a mount for a 12mm beeper…
I recently bought a "LED Power Supply" from eBay for my LiPo charger, and found the instructions and STL from bastian___ - but unfortunately that cover didn't fit my PSU, so i designed a new one. The PSU has the model number DY01, accepts…
I got a Dreame V9 today and of course also want to use the wall mount with the integrated charger, but don't like to drill holes into my walls. So i opted for the next best thing: double-sided tape. The plates provide enough surface for…
I got tired of my Wotofo SMRT Pod Kit leaking when i lay it on its side for charging without removing the pod, so i designed this charging cradle / docking station to charge it upright. You'll need a 90° Angled USB-C cable. I've included…
These simple mounting brackets allow you to mount your Canon imageFORMULA P-208II document scanner to your desk, preferably under it. You'll only need some woodscrews (e.g. 3.5x20). As this is a very minimal design, opening the front flap…
If you're using the Seafrogs Underwater Housing for Canon M50 with a zoom lens, and by that also the zoom gear for the housing/lens, you probably also had it happen to you (more than once) that the zoom gear sometimes slips towards the…
These are all currently available results.
