Counting matching models…
This tool set helps you get a perfect finish on your silicone caulking. You'll find the following: straight profiles for corners (5, 7, 8, 10, 12, 14, 16 mm) rounded profiles for taps, fittings, or recessed joints (5 and 15mm) a tool to…
Compact pebble shaped traveling case for the Pixel Watch 2 charger, with cable winding feature and power adapter mount.
Date Description 18/09/2024 Updated models for gen 2 & 3. Slightly enlarged the ring and the cable groove for an easier fit. 03/01/2024 Fixed a mix-up in the files. I had not uploaded the right ones for the Pixel Watch 2. 02/01/2024…
This is version 2 of the tennis racket wall mount, made of 2 parts so that the mounting mechanism is hidden and there are no visible screws. It still holds 3 rackets but only uses 2 screws. Note: I wanted to make a nicer design with no…
Update (04/02/2024): I've added a base design that has a space for the score booklet, it is 7mm thicker than the original design. Simple print, 15% infill, no support. I'm holding it close with a rubber band when traveling. On the base…
I've designed this model sot it would fit both the original Pixel Watch 2 charger from Google, as well as 3rd party ones, some of which have a cable strain relief where the cable exits (and so, a wider diameter). Setup: The charging pad…
Updates since initial upload: Date Description 02/23/2023 Added a USB-A version, to fit 3rd party adapters. The USB-A version is ~2.3mm thicker, and has been tested for the GEEMEE charger. Thanks to Martin Th. for providing me with the…
Update May 13th 2022: modified shelf hinge diameter to better slide on the poles, added drawing for wooden shelf dimension. Undecided between a floor lamp & a side table? You don't have to choose anymore, with this amazing tripod floor…
I wanted a card trading post, but was annoyed it wouldn't fit in the original box, for which I already found the insert and organization to be subpar. So I created a set of boxes and parts and inserts to better organize my Catan game and…
Simple SKADIS peg board holder for a combination square. Printed at 0.2mm layers, 20% infill, no supports.
Updates since initial upload: Date Description 26/02/2025 The model wouldn't scale properly to meet some parametric changes. It's been updated and should scale fine now. 24/05/2023 I added reinforcement in the stand because under the load…
Wall mounted tennis racket holder, using 4 screws. It can hold 3 rackets. I've printed this part at 0.2mm layer with 15% infill, in both PLA & PETG. Both hold fine. I have designed a variant of this model , mounted with 2 hidden screws .
I wanted to design something slightly more compact and easier to use than my original travel case with integrated stand. In the end: it's slightly more compact there is a version of the stand in which you can insert a 1€ coin to add…
This is a collection of magnetic attachments for a hydration pack tube, to easily secure it on your backpack. I have a Osprey hydration reservoir that comes with a hose magnet kit , however, the part you put on the backpack is designed to…
Updates since initial upload: Date Description 10/3/2022 Thickened drawer shell by 0.2mm to try and strengthen the device (a friend of mine's box drawer broke after many months of daily use) Added some tolerance to the drawer's magnets…
This is a remix of my tennis racket wall mount v2, made of 2 parts so that the mounting mechanism is hidden and there are no visible screws. This version is designed to hold a single tennis racket. I printed at 0.2mm layer height, 15%…
This design is for the Pixel Watch 4 No more messy tangled cable when traveling with your Pixel Watch! Easily unwind the cable when you need to charge, and wind it back to store it. This is specifically designed for the official Google…
I needed a custom sized cable management box for my needs, so I designed one, and made it parametric so anyone can make their own custom version too. For the sake of simplicity, I've also added a couple of different sizes. S = 20 cm x 10…
The power of magnets makes it easy to drink from your HydroPak when you need to, while easily and neatly tucking away the tube when you don't. This is a collection of magnetic attachments for a hydration pack tube, to easily secure it on…
May 22th 2023 update: widened the opening for the handle clip. This is a travel case for Rockwell safety razors 2C, 6C or 6S. It comes in 2 designs: a simple cover, and a version which can hold 3 extra blades. I printed it with no support…
Bike mount for UE MEGABOOM 3, for standard mounts with M5 screws. This is a remix from my cageless design. I have not tested this standard mount design, but made it as it could be of interest to more people. Adjustable: You can easily…
This is a replacement battery cover for the Cardin S449 remote. I had found a model online for this, but it didn't clip on my remote properly, so I made my own. I've made 2 versions, one which replicates the original cover, and another…
This is a 3D printed stand for the HORL 2 sharpener. It's inspired by the official HORL station. The stand has a cavity so you can add weight to it. I've personally used big washers, as you can see below. It also has a cavity in which you…
Coat / helmet hanger clip for the Rubbermaid FastTrack system. Credits to @ dhulihan on Thingiverse for the Rubbermaid FastTrack clip design, leveraged for this coat hanger.
Updates since initial upload: Date Description 10/22/2022 Proto 3 files added. Proto 2 hinge tolerance was good, but the spring loaded hinge was pushing the pad out (the arm wasn't parallel to the base when folded). I added a little…
Simple print, 15% infill, no support. It has some small ‘clips’ to hold it closed, but better be safe using a rubber band when traveling. The easiest way to close it and have the top and bottom align properly is to lay the box on a table…
Simple mount designed for KitchenAid attachments. It only requires 1 screw. The screw hole diameter is 4mm and countersunk.
For the assembly, use filament as the axis to the hinges. Start with the bottom part, then the top one. I proceeded the following way: Insert filament through the hole, with the arm properly positioned Melt the end of the filament with a…
This is a folding stand I use for my Nintendo Switch when I travel, so I can set it and connect it to any TV (I have a power adapter that also replaces the dock). To assemble the hinges, use a piece of filament and melt the ends. You may…
Bike mount for UE MEGABOOM 3, using the Fabric Cageless mounting system. Yes, it is a speaker cage for a cageless mounting system. It allows for a quick and easy switch with other cageless accessories. Adjustable: You can easily adjust…
This is a model I made of the Pixel Watch charger (gen 1). I have used it successfully as a reference in multiple projects ( here , here , and there ). I wanted to share the model so maybe it's easier for anyone to design around it.
I've designed this replacement for a Cookeo handle cover after the original one broke. I printed with support, and in ASA so it so it can withstand higher temps, and the dishwasher hopefully many times. The uploaded files don't have the…
This is a grommet pencil cup for a desk top. It fits 80mm / 3.15" grommets The total diameter (with the lip on which it rests) is 90mm It is 90mm deep from the underlip to the bottom. Printed at 0.2mm layer height & 15% infill using PETG.
Simple design to hide the IKEA PLATSA small holes. Prints fast and without supports.
Made this simple part for my saucepans to be stacked without touching one another. It's 14cm in diameter, and 2.8cm heigh (so my saucepan handles wouldn't touch).
Note: this was designed for the for the Prusa i3 mk3s, it has not been tested for the mk3s+ though I don't believe that side of the X-axis part has changed, so in theory it should work. If you try it, let me know how it goes! :-) This is…
This is designed to work with the ABUS Granit X-Plus 54 Mini U-lock, and be mounted on the Boosted Rev electric scooter, which has a 38mm diameter tube. It may work with other similar sized locks, but I have not tested it with any other…
Simple 1 screw mount for Dyson attachments, designed to be mounted on a horizontal surface like under a shelf or on a ceiling. Works with both standard and powered attachments.
This is a simple mount I designed for the Delta Dore Tydom 1.0 hub. It can be used either vertically or horizontally, as the hub's bottom “fins” fit in the slots on the mount, preventing it from sliding. I mounted it using screws, but you…
Simple print, 15% infill, no support. I'm holding it close with a rubber band when traveling. On the base you can find pictograms for the number of players, age, and duration. I didn't leave any space in the box for the rules book, but…
This is a shelf designed to hold a Google Wifi router. So that it has a place to live in places where you don't have any furniture to put it on (e.g. a corridor). It is installed between the wall and the socket plate thanks to the…
This is a grommet hub holder for a desk top. It fits 80mm / 3.15" grommets, and holds the following UGreen USB hub : Printed at 0.2mm layer height & 15% infill using PETG.
I recommend printing the top upside down, with support on the build plate only (at least). You can probably put supports everywhere, but it may be harder to clean up afterwards For the bottom part, you can print it upright, with either…
FastTrack planter holder (92mm inner diameter). I have not tested with heavy plants, but it works perfectly with IKEA's fake plants and small FÖRENLIG planters
[10/12/22 edit: added a version with a slimmer rail to address user feedback] Wall mount for LiftMaster garage door remote. It's a tight fit (clips in place). It may work with other models as it uses the groove meant for the visor clip,…
I've designed this for my Prusa mk3s+ enclosure, so that it fits the printer's LCD screen, as well as the official Raspberry Pi 7" touch screen , and a Raspberry Pi 4 mounted on the back of it. That way I can take the full advantage of…
Updates since initial upload: Date Description 12/15/2022 I modified the design so the USB-A to USB-C adapter would be held in place by the USB-C connector end. That way it's compatible with more adapter designs than just Google's.…
This is a smaller version of my dongles & cards organizing case . Dimensions: 72mm x 37mm x 15.1mm It's designed to hold: 4 microSD cards 1 SD card (or microSD adapter) 1 USB-A to USB-C adapter 1 USB-C to USB-A adapter I printed it in…
[10/18 edit: the parameters for the f3d file weren't working right. If the bar diameter is bigger than 6mm, you may want to reduce the wall thickness of the horizontal bar receptacle, as it is tied to the bar diameter] This is a repair…
I've made this simple laptop stand for better ergonomics when I'm not at my desk. It can hold a macbook pro up to 16 inch. The back of it is roughly 23 cm high (and the laptop would stick out a bit from there) Assembly is a tight fit + 4x…
Simple print, 15% infill, no support. I've designed it to be kept close thanks to four 6x2mm magnets, but if you don't have that on hand, holding it close with a rubber band when traveling should do the trick. On the base you can find…
Designed and printed a fix for my girlfriend's Morphy Richards blender ( model 48973 ). Printed the inner parts horizontally with support. Printed the outer parts vertically with support on build plate as well.
I've designed this charging station so I could wall mount it, improving accessibility, and added a timer to avoid keeping my bike plugged-in more than it needs to (and reduce the battery longevity). It is designed for the type B plugs…
I wanted a ladder to put in my room so I could use it for clothes, etc. and I found this great IKEA plant stand ( Satsumas ). Except, I didn't want to screw it into the wall, so instead, I designed and printed these wall rests. They are…
Designed this simple part to replace a missing rubber foot on my father's De'Longhi coffee machine. Even with just 2 perimeters and 15% infill it's not as flexible as the original rubber foot, but it fits and does the job. I'm not sure…
This design is for a 6mm thick mirror, using 12mm wide and 4mm thick circular rubber pads. You can adjust dimensions for the mirror, angle, and rubber pads in Fusion360 using the provided .f3d file. I've printed it on its side, with no…
These are fixes for the plastic parts that hold the handle. It is compatible with the Frigidaire Gallery series model FMT148GPB1, I'm not sure about any other. I've also included a larger bottom part (our microwave door's whole corner was…
These are all currently available results.
![Pedal bin mechanism hinge repair [parametric]](https://media.printables.com/media/prints/297735/images/2607349_6e32c038-5774-4ffe-929f-477c49d997ee/pxl_20221017_234301493.jpg)
