Counting matching models…
Information SlimeVR is an open source Virtual Reality Body Tracker project. I designed this case to house some components following the SlimeVR schematics. This is my first time making a case to fit a bunch of components and the first…
So my Dad has an Elgato Stream Deck 15 Key (20GAA9901) and was wanting a desk mount after seeing my Stream Deck Mini Under Desk Mount which was my first Custom 3D Printed Design. (See new Mini Deck Mount here ) This should have less flex…
So I decided to make a better design to hold my Elgato Stream Deck Mini on my desk. This mount uses screws or may even work with strong adhesive of some sort. The four holes on the mount use 4.15mm screw hole spacing, I used two of the…
So I wanted to try designing a hook on type buckle that can be used with some straps for easy release. Could be used with Virtual Reality trackers like SlimeVR if your strap fabric fits fine. Quick release waist band? If you find a use…
A 18.52x8 Battery Mount for the Flywoo Firefly 1S Nano Baby Quad V2 DC16/FR16. Print in TPU at 0.2mm and possibly 100% Infill. Printed on a Creality Ender 3 Neo (Bowden) slowly with my special TPU profile. Uses the stock mounting method…
Recently discovered Meshtastic. My first Device was the Heltec LoRa v3 with SMA antenna piece. I decided to make a case that still has access to the battery port and socketed pin area. This design could be improved on. Screws The case is…
A Compact Flash Card Holder/Case that I made for my Dad. Feel free to modify and print. Lid can be a little snug. Note: My printer needs the bed tuned a little bit better again so the lid looks a bit funny on the image at top which I…
So Happymodel Decided for the Bassline 2S to only release dimensions and not an STL File. The provided files are close to the dimensions of the stock battery holder. I use this for mounting in a little tightly: GNB 550mAh 2S 90C LiPo…
Recently I got a Jumper T20S Receiver/Transmitter for FPV Drones. I chose the RDC90 Version and really needed something to protect my gimbals, so I made this. Printed on a Creality Ender 3 Neo with PLA, 0.4mm Nozzle at 0.2mm Layer Height.…
Some simple designs of a cap for XT30 and XT60 batteries to help protect the ends. Perfect for FPV. Printed in TPU at 0.2mm Layer height on a Creality Ender 3 Neo. 100% Infill for best results. If you print this in any other material let…
A little helpful file for making cases to hold either; Wemos LOLIN D1 mini V4 TP4056 BMI160 Holds these parts loosely. Handy for making a case for SlimeVR Open Source VR Trackers - Github - Docs - Schematics Option for my first test in…
EDIT: You can find my new mount here which may work out better! Elgato Stream Deck Mini Under Desk Mount for X Rocker Panther Desk. So I wanted a way to mount my Elgato Stream Deck Mini on my desk. I recently bought my first 3D Printer -…
So I wanted to make an FPV Camera mount for the AKK AIO-SA / TheFPV SA Micro AIO FPV Camera and 200mW VTX. I though this could be fun to mount on to a RC Car and then use the camera with any 5.8ghz Analog Monitor or FPV Goggles. FTX…
A mount which will let you attach a Raspberry Pi Camera to 40mm Fan Spacing, you can share the same screws with a fan if they are long enough. I couldn't find a similar mount so I decided to go ahead and try to make my own with Fusion360…
So my Dad has a DJI Phantom 3 and he lost his Stick Tops. I decided to make some. Feel free to modify with the provided Fusion360 “.f3d” file. If you make your own edit and post it then please add it as a remix to this. I ended up…
So I am new to Fusion360 and made an improved version of my Raspberry Pi Camera mount! This Camera specifically is; Waveshare - RPi Camera (B) - OV5647 This mount uses two 40mm fan spacing screw points. I made this to match the 40mm fan…
Radiomaster RP1 ELRS antenna and an SMA locked antenna mount for Ummagawd Botgrinder Grinderino 3.5" using TPU. YOU MUST USE TPU - The RP1 Antenna and the print bend a little to get it fitting into place. Secure the T antenna last. A…
Modified Battery Holder for the Fractal Engineering - Fractal 65. Remixed and modified a bunch from another design. This will let you use a GNB 300mah 80C A30 Pink battery. I bought these not realising how big they were. The battery loop…
So I needed a nice way to hold a bunch of Standard SD and MicroSD Cards. made this little holder/organiser. Might make a lid later as the design has some areas to help support one. This currently holds 12 SD and 12 MicroSD. I had to…
So I wanted to make a stand for a Valve Steam Controller. This came out pretty well, it holds the controller in the middle and is quite sturdy/still/balanced. The bigger raised piece goes to the back and smaller on the front. Let me know…
I needed a Shell/Stand for the Raspberry Pi Touch Display so I decided to make this on Fusion360. This stand fits the Raspberry Pi 3 or Raspberry Pi 4 as they have the same mounting holes. You use the screws included with the Raspberry Pi…
What this is A very basic four battery holder for holding DJI Tello batteries. Could be handy for those wanting a way to hold some DJI Tello Drone Batteries. I designed this quickly in Fusion360. The batteries sit loosely and move a bit,…
I wanted something to slide a GNB 2S 3000mAh Goggle Battery on to my jeans. Here we go. Sizes roughly (Battery): Tall = No limit, 46mm Deep Other sides = 22.40mm x 40.75mm Size of clip band max; Around 4mm. Feel free to use/modify. Print…
I wanted to put a HDZero Freestyle V2 VTX Kit into my Shendrones Squirt V2. This is the result. You can still easily access the firmware upgrade port as it will be on the top. I am using slimmer slammed 76mm ducts so not sure if this will…
These are all currently available results.
