Counting matching models…
We have a little kitchenette at my office, but it sorely lacks places for storing sponges, rags, brushes. . . so I designed this stand so the bottle brush would not have to hang over the edge of the sink to dry. When I sliced it, I added…
Print approx. €10.87–€13.29 excl. taxPreliminary estimate for one variant
EDIT: I designed the regular height organizer square bin as well. EDIT2: And the regular height rectangular bin. EDIT3: And I designed a divided regular height rectangular bin with removable dividers as well. EDIT4: Added center bins that…
EDIT: I have designed 5 additional bins for the organizer center channel, and with those 5 bins - in addition to these three - you can configure the center channel with 5 different bin length combinations. The bins are for purchase in my…
EDIT: I have designed 5 additional bins for the organizer center channel, and with those 5 bins - in addition to these three - you can configure the center channel with 5 different bin length combinations. The bins are for purchase in my…
This bee watering tray is designed so bees can land and get water from between the hex posts and not drown. It is designed so that a small mouth Mason or Ball jar will friction fit inside the mounting ring. It does not need support…
This is a set of 5" sanding pad holders for my 5" random orbit sander. Print with the slots vertical. I suggest printing with a 5-6mm brim to keep the corners from pulling up. Running list of available grits: 40, 50, 60, 80, 100, 120,…
After duplicating the Milwaukee Packout Low-Profile Organizer bins , and creating dividers and a modified low-profile square bin that can go where the low-profile rectangular bin normally sat, I decided I might as well duplicate the deep…
EDIT: Created a divided rectangular bin, with removable dividers as well. After duplicating the Milwaukee Packout Low-Profile Organizer bins , and creating dividers and a modified low-profile square bin that can go where the low-profile…
UPDATE 03MAR24 I was asked to make a Lapua lid, so I did. UPDATE 16NOV18 I finally got around to adding custom lids for Remington Thunderbolt bullets and four different CCI bullets ( Mini-Mag HP, Mini-Mag HV, Quiet-22 and Standard…
- - - UPDATE 12FEB2023 - - - I re-uploaded the original 0.06", 0.09", 0.12" and 0.15" hole sifter trays after centering the holes in the bottom. I know it's petty, but I feel better now knowing the holes are centered on the bottom of the…
Update 4 SEP 2024: Added 1-3/8" Insert Ring and 1-3/16" Insert Ring. I needed to replace a couple of the ring inserts on my JessEm Mast-R-Lift router table , but I wanted to see if I could duplicate it instead of just buying one because,…
EDIT: Here are the Half-Height Bins . EDIT2: It took a lot longer than I anticipated, but. . . Here are the full height divided bins. Since I have already duplicated the: Milwaukee Packout Low Profile Organizer bins and the Packout…
After duplicating the Milwaukee Packout Low-Profile Organizer bins , and creating dividers and a modified low-profile square bin that can go where the low-profile rectangular bin normally sat, I decided I might as well duplicate the deep…
Since I made the rectangular divided bin that has 4 cavities that fits the Milwaukee Packout Organizer, I was asked to make a rectangular bin that has only three cavities. Here it is. If you like these models, check out some of my other…
I just want to say that these really do fling dirt / rocks / gravel behind them in a HUGE arc. These tires are not good if you are around anyone who does not want to get peppered with rocks and dirt. These can easily fling rocks 30 feet…
EDIT 2 Here are the 0.85" wide rims and tire for the front of your 2WD if you want that dune buggy look. EDIT 1 I added rim design 011 through 014. I also slightly modified rim 008 by adding an 0.030" fillet on the top edges. ORIGINAL My…
I designed this because I liked the look / style of the extended mag base plates for my Ruger 22/45 MKII and MKIII, but I did not like the look of the extended mag base plates for the MKIV, so I first duplicated the stock base plate, then…
This is the fourth and final iteration of paddle tires for my and my sons' Traxxas Rustler 2x4 and 4x4 trucks. These paddle sleeves (as I call them) are compatible with the rims here which cam be printed in PLA, and are very durable. Here…
Edit: 07 NOV 2024 - Added letter bases, so you can imprint a letter in the bath bomb now . My son wanted to make some bath bombs for his mom for Christmas after watching a video online, so I made this mold to knock out a bunch of them…
I was asked to make a 60rd ammo box by a revolver shooter, so they could slide back the lid and drop 6 rounds out instead of 5. So, I modified my previous 22LR ammo box to hold 60 rounds in 10 rows of 6 rounds. I also modified the lid…
I already had extended mag base plates for my Ruger 22/45 MKII and MKIII, but since I duplicated the mag base plates for the 22/45 MKIV , I figured I might as well do it for the MKII and MKIII as well. I highly recommend you print them in…
Here are the half height bins I wrote about in my full height bins post . Since I have already duplicated the: Milwaukee Packout Low Profile Organizer bins and the Packout Organizer Square bin and the Packout Organizer Rectangular bin . I…
I made the mistake of putting a lid on my Lodge cast iron dutch oven before putting it away and the oil inside the oven went bad. After scrubbing it out and re-seasoning it, I designed and printed these spacers to keep the lid from…
EDIT 2026-06-14: If you had a fitment issue with the divider fitting easily in the slot in the bin, I apologize for that. Please download the --A model that had the slot widened by 0.02". I designed them and printed the bin and divider,…
This is a sliding lid box for holding 50 rounds of 22WMR rimfire ammo, similar to my previous 100 round 22LR Bullet Holder . No special instructions other than using a 0.2500" reamer (preferred) or a 1/4" drill bit (works as well, just…
Duplicated the Ruger 22/45 magazine follower that works in the MKII, MKIII and MKIV models. I print it with supports, and the angled face on the print bed. If you are looking for the base plates, the MKII and MKIII are here , and the MKIV…
This is a 4" x 4" x 0.2" Seattle Seahawks coaster or plackard. It can be printed in three colors just by swapping out the filament. If you slice it at 0.2mm layers - including the first layer - you can get the green eye in the logo. 0.2mm…
I bought a bunch of oscillating multi-tool blades and found there were not a lot of options for holding a lot of blades in a compact case, so I designed one. There are three different spacers to help hold the blade end up so they don't…
I wanted a way to store my driver bits, but did not want them in the holders that hold each individual bit. I think that is an inefficient use of the space. I used a DeWalt bit holder for the last decade or so, but it is now discontinued.…
EDIT 12FEB24: I am not sure when it happened, but all except 4 of the models were corrupted / deleted. I just re-uploaded them all today, so hopefully that won't happen again. – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –…
I found out how to use Inkscape and SolidWorks to convert 2D art into 3D printed items, and since I had a bunch of vectorized logos, I figure I'd have some fun and print out some college logos in their respective colors. I Think the UW…
** UPDATE ** I modified the battery strap slot so it can be turned up side down and used to hold batteries that fit in the compartment like they are supposed to so you don't need to carry your flat strap if you don't want to. Also, if…
These are battery straps for Traxxas 4x4 VXL Trucks. They MAY work on the non-VXL trucks as well, but I don't have one to try it out. There are four different files. Two are for the "First Gen" chassis with the short battery compartment.…
I decided to design extended mag bases for the GSG 1911-22 like I did for the Ruger MKII / MKIII and MKIV 22/45 pistols. I ended up making 5 different designs, because hey, everyone loves choices! I figured, since I designed them, might…
I finally picked up some security cameras, and it seemed that with most of the ideal locations to mount them, and the areas I wanted to view necessitated that the camera be able to angle more than the supplied mount allowed. I could have…
This is a simple color chit design so I could show people all of the colors I have available. I print 3 of each color I have so I can keep one set of color chits in my craft show box, one at home, and one at work. Category: Other
Here is a drift sleeve for the rims I have designed for my and my son's Traxxas Rustlers. The original 3.00 x 1.925 rim I designed for off-road use is here. and the additional rims I designed are here . I'll have to find the model for the…
I originally made a 100rd ammo box that duplicated the CCI plastic boxes to replace ones broken during shipping. Then I was asked to modify it to hold 60 rounds so 6-shot revolver shooters could still drop out one row at a time, so I did.…
Here are some custom lids for the 22LR ammo box I previously made. I just swapped the blue filament for white at 1.4mm and white filament for red at 2.2mm to get the color pattern. Print Settings Printer Brand: Prusa Printer: i3 MK3…
I designed these to prevent the knobs from turning on and releasing gas when accidentally bumped. I printed them in matte black PLA and adhered them to the stove with 3M VHB foam tape.
This is a set of holders for 2" Velcro backed sanding pads. I have previously made a set of holders for 5" disks here and from requests, made them for a bunch of grits. I used that info to make these with all of the requested grits right…
This is another wedge and strap for a 3S LiPo battery like this one here , but this one is for batteries that are too long for the tray, not too thick like the previous one I made. I thought I had all the dimensions correct, but the…
UPDATE I have put up the fourth (and final) iteration of these paddles. This is the third iteration of the Traxxas paddle tires I have been playing with. The first set I designed were large and were burning clutches and shearing pins in…
This is just a 100 round version of my 50 round 22WMR ammo box / bullet holder. Since I didn't print any of these, I don't have any photos. The parts should fit since I extrapolated them from the 50 round box. Please let me know if there…
* UPDATE * I have designed the fourth and final iteration of paddle tires for my Traxxas Rustler. * UPDATE * I have designed the third iteration of paddle tires for my Traxxas Rustler. * ORIGINAL * This is a slightly smaller paddle tire I…
This is a set of holders for 3" / 75mm Velcro backed sanding pads. I have previously made a set of holders for 5" disks here and from requests, made them for a bunch of grits. I used that info to make these with all of the requested grits…
I designed these holders for the Brother label cartridges at work since we have so many. These make it easy to keep them organized by size and color. The cartridges will fit in these while still in their wrappers, but it is a tight fit.…
Here are the 0.85" wide "Pizza Cutter" rims and tire that go with the rims I designed here. The numbers should correspond to those rims, so you can match the wide and narrow rim design. I'm lazy, so I am not going to upload any pics here,…
This is a holder for a roll of 3" round stickers / labels I use for target shooting at the pistol / rifle range. I bought the roll because I was appalled at the price a popular shooting brand name wanted for each sticker (it was around…
This is a flower pot I designed for my wife when she brought home a bunch of small plants. There are holes in the bottom of each of the cavities, and there are also holes between the cavities to aid in drainage in case one hole becomes…
These are custom “Winchester” and “Winchester Super X” I designed lids for my 22LR Bullet Holder . I have also designed a bunch of CCI lids as well as a Remington lid. For the “Winchester” lid, you can print the base layer in black or…
This is a customized lid for my 22LR Bullet Holder . I am working on lids for the CCI family of bullets as well as a Remington Golden Bullet lid. I'll be posting them as I get a chance to print them and see how they look. This was printed…
This fits the WEN 6321 belt sander. The light blue is the new 1.25" adapter, the dark blue transparent is the original 2.5" adapter. I designed the 2.5" adapter, but I was asked to make one for a 1.25" hose, so here it is. I put a taper…
Just a couple of things to help me not lose body pins and to help pull the battery strap pins out easier. I printed them out of TPU and as much as I like the body pin straps, the battery pin tabs make inserting and removing the battery…
I got bored and decided to make bases to be able to imprint letters in your bath bombs made with my Bath Bomb Mold located here that only had a heart base. The letters are already reversed, so all you have to do is print them as they are.
I purchased a WEN 6321 belt sander and wanted to be able to hook up my 2.5" dust collector hose to it, so I designed an adapter. If you need this for a 1.25" hose, here you go . Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts:…
I bought my wife a set of battery powered salt and pepper grinders from here: https://www.flafsterkitchen.com/products/battery-operated-salt-and-pepper-grinder-set But my wife did not like the look of the included caddy, so I designed…
My wife picked up some shampoo bars, and I really like them, so I needed a container to hold them when I travel. I could have used a regular rectangular soap bar container, but where is the fun in that. I made the shampoo bar holder…
My wife wanted us to stop using plastic drinking tumblers and straws, but I was unable to find any glass tumblers that held enough water. I drink a lot of water, so I wanted something that would hold at least 32oz. I found these 32oz…
This was specifically designed to work with a BD 60mL syringe with catheter tip (REF309620) and MIC-KEY Tube Secur Lok Extension Feeding Set (REF 0121-12). If you hold the "G-Tube extension" part when feeding, there is no way for the…
This is a customized Aguila lid for my 22LR Bullet Holder I designed. I have also designed custom lids for CCI , Winchester and Remington .
This is another Lutron Caseta light remote holder. The picture is the 4 x 1 meaning it holds four remotes across by one down. I modified the original remote I made (which is a 2 x 3 - two across by three down) in that I split the walls in…
I already designed the non-vented JessEm Compatible Ring Inserts for Router Lifts so I was asked to make them vented so people could use them with their downdraft router table. So I did. They should be completely compatible, just as the…
These are drag chain brackets I designed for my first SO3 and the 15mm x 30mm drag chain that came with it. These were designed before there were limit switches, so you will have to verify that these do not interfere with them. Print…
I needed to install a solar panel on the fascia board for my camera, but there was a rain gutter that interfered with the solar panel, so I made a 4" spacer to get the solar panel far enough away from the fascia board that I could turn it…
Some Hatchbox filament spool hubs I designed in SolidWorks for my Prusa i3 MkII. Hatchbox has two sizes of filament spools, and I made hubs for both sizes. Just print two of whatever size you need and one center rod and you're done.…
These are the brackets I designed for my SO3 XXL and Uxcell R55 drag chain brackets. My HDZ is the first gen version, so the bracket for that one will have to be redesigned. I don't have the newest version, so you'll have to do it. There…
My mom has very poor hand strength, so I designed this cheater bar for her to be able to turn on and off the hose so she can water the garden without needing someone to turn on and off the water. I forgot to get pics of the actual one…
I use the 50ml epoxy tubes and two different sizes of mixing tips, depengin on if I am planning on using a little bit of epoxy or a lot. For small jobs, I use these little tips and for larger jobs I use these larger tips . For the most…
I upgraded a bunch of the dimmer switches in my house to the Lutron Caseta wireless remote switches, and I wanted a holder for all the remotes so I could control the lights from the laziness of my couch :-) I am not impressed with the…
I was tired of keeping the collet and lock nut assemblies in their original cardboard boxes because after two years, the boxes were getting pretty beat up, so I designed and printed one. I have all three sizes of collets available, so I…
Since I made my 22LR Bullet Holder I have made a bunch of lids with different logos on them, and I was asked to make one for Federal Auto-Match ammo, so I made three. For the "Auto-Match" and "Federal Auto-Match" lids, color changes are:…
These are all currently available results.
