Counting matching models…
I have the 54 and 32 quart Sterilite containers that I use as dry boxes and wanted clips for the ends. I noticed the gasket on the ends wasn't getting compressed much at all. These have helped quite a bit and can be used on the sides as a…
Print approx. €1.01–€1.24 excl. taxPreliminary estimate for PETGSource material: PET
Another addition to my aircraft company logos collection. https://en.wikipedia.org/wiki/McDonnell_Douglas This can be printed easily without the MMU2 since the color changes occurs at a specific layer. I printed it in PETG, but PLA would…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for PETGSource material: PET
I was browsing the internet, looking at logos of old aircraft manufactures and wanted to see if I could recreate some of them. This finished print is approximately 104mm(4 inches) square. Print instructions: This can be printed easily…
Print approx. €3.12–€3.81 excl. taxPreliminary estimate for PETGSource material: PET
I previously used a large spoon to aid drying out my Camelbak bladder, but it wasn't that good of a solution. This design isn't anything fancy, but it does a great job of holding the walls of the badder apart to dry it out. I printed it…
I wanted a boot/base that was soft as opposed to the commercially made ones that are mostly made of a hard plastic. This one is designed to fit snugly on a Catalina aluminum 80, 63 or 53 cu. ft. cylinder. All of which have a 7.25" in.…
I've had Klean Kanteen water bottles for years, but most of the commercially produced cages/holders haven't fit well. So, that's why I made this one. It will work with either of the below linked bottles.…
I browsed around the internet and like this design https://www.thingiverse.com/thing:25098 and just made some small changes. For reference, my phone is an iPhone 11 in a Speck Presidio 2 GRIP case. I would assume the mount would work…
I got the idea for this from a bumper sticker that said “Safety Third”. I thought I could do better and modeled mine after the UN Class 3 flammable placard. This can be printed easily without the MMU2 since the color changes occurs at a…
Many models of Onan gas or propane powered generators for RVs have an angled fill port with a screw cap that doubles as the dipstick. A standard funnel that you would purchase at an auto parts store doesn't really help much, so I decided…
An E3D Revo nozzle holder that can be mounted on the leg of an IKEA LACK or other enclosure. I mounted it inside the enclosure on the right side with two #6 x 1/2" screws. Hope you find it useful and please rate/post your make. Print…
I browsed around the Printables website before designing my own holder and didn't find one that fit my needs. There are many good designs out there, but none that held the number of tips I wanted with a lid. My design has a lid that snaps…
There's only so much space at the top of the ladder for tools, so I decided to make a box that clips into one of the existing holes in the top of ladder. Werner has updated the top plastic part of their fiberglass ladders and now has a…
I was browsing the internet, looking at logos of old aircraft manufactures and wanted to see if I could recreate some of them. The finished print is approximately 100mm(3.75 inches) wide and 90mm(3.5 inches) tall. Print instructions: This…
A simple little tool holder for the Allen wrenches, screw driver and glue stick(or Q-tips) that are included with the printer. It also has a spot to hold a bronze brush. I mounted it inside the enclosure on the right side with two #6 x…
I've had a Silky Hayauchi pole saw for a couple of years and I always just leaned it up against a wall in the corner. I've wanted a better way to store it and that's why I designed this bracket. It also looks like it works with Notch…
I was browsing the internet, looking at logos of old aircraft manufactures and wanted to see if I could recreate some of them. This finished print is approximately 110mm(4 inches) square. https://en.wikipedia.org/wiki/PZL This can be…
When I holster my Harbor Freight heat gun, the metal tip(which gets pretty darn hot) would hit the peg board and pull the bottom peg out a bit too. So I redesigned the bracket for a little more clearance. In the side by side picture,…
Printing this is pretty easy and I chose PETG, but PLA would probably be fine too. The tree is printed as is with 2 perimeters, .15mm layer height and 5 top/bottom solid layers. The ornaments are printed in separate prints depending on…
These are all currently available results.
