Counting matching models…
Useful for feeding filament from dry-box or dryer. Remixed from the original mk3 design. Increased height between printer frame and forward angle to eliminate collision with the MK4 extruder carriage, and revised the “clamp” to be tighter…
Installing an exhaust fan to keep your Original Prusa Enclosure cool for PLA or PETG? But don't want air escaping when you print ABS or ASA? Then you need a fan damper! This damper is designed to fit the 120mm cutout on the back of the…
The original worked well, but I noticed the filament was dragging as it went through the passage below the ptfe fitting, particularly when the print head was far-left or far-right. This minor remix just enlarges that passage and flares it…
The new cooling duct on the MK4S makes it very difficult to remove the silicone sock, since access to the top of the heat block is obstructed. This simple tool is designed to hook the silicone sock, so it can be pulled downward and…
Inspired by model on MakerWorld by @mkersjes, but redrawn from scratch to provide stiffer frame (less sag) and reduce size of the feet. Drawn as solid, but the included 3MF file employs layer range modifiers to eliminate top/bottom solid…
Small desiccant box measuring 56mm x 56mm x 26mm. Lid slides on via dovetail joint, and has catch to lock closed (but can be reopened with a little effort). Air slots are 1mm wide. The sliding dovetail requires a reasonably…
Closed bottom tray for the Omnifixo M4.4 injection molded field box. The current M4.4 comes with an injection molded (IM) field box. I first tried the closed bottom tray remix created by @PjotrStrog, but it did not fit the IM box (his…
Funnel designed to fit the opening of Weber Workshop's Polymer (aka Resin) Bean Vaults. Fits some other designs as well; outside diameter is 28mm at the bottom, and 60mm at the top. New design (Sketchup File included) inspired by this one…
Stand for Fluke digital multimeter. Designed for model 77, also fits others of same era (confirmed to fit 75, 76, and 23 -- probably fits several others. Please add a comment if you find another model it fits!) No supports required (all…
I found the PushRod included with @chewey's seesaw mechanism (linked as remix source, below) was too short, leaving “slop” in the mechanism and preventing full eject actuation. This model is simply a lengthened version of that one part,…
A version of Prusa's transport handle with PTFE tube passthrough and PC4-M10 fitting. Also inspired by @Spitzspot's model #285197, but I needed to feed from the left side and wanted a straight PTFE entrance channel. No supports required.…
Pellet Magazine holder for Gamo Swarm X10 Gen2 air rifle .177 Pellet Magazines. Two designs included: One is for the regular X10 Gen2 magazines, the other is for the slightly thicker "Inertia" X10 Gen2 magazines that come with the Magnum…
A remix of Stephen Hagler's case for the brett.tech info-orbs project. I really liked Stephen's design, but I experienced alignment problems between the “front” and “rear” parts which led to breaking screens during assembly. In addition,…
Simple stand for StickVise PCB holder. The StickVise is great, but sometimes having it at an angle instead of flat on the desk is preferable, giving easier access to some components. Two of these stands securely hold it at a 30 degree…
Simple stand designed to hold (12) of the current Weber Workshops Polymer (aka Resin) Coffee Bean Vaults, in a 2x6 configuration. The dual-diameter holes allow inverted tubes to sit higher, providing an easy way to visually identify the…
Small mount / stand-off for a common metal-encapsulated DS18B20 temperature sensor. I use two of these, monitored by Octoprint, to watch temperatures of the enclosure and a filament dryer. Base has a recess for an M3x8 nut; use an M3x6…
Magnetic catch to keep sheets fully engaged in their slots. Should work with most variations and remixes of @Whity's Expandable Steel Sheet Holder, as long as they retain the 10mm spacing between sheets. Models provided for 1, 2, 3, 4,…
Remix of Apple keychain by @Jonathan_2428294 to change dimensions and reinforce hole. Shown printed in Prusament PETG white and Galaxy Black.
I recently purchased a pair of SVS PC2000 Pro down-firing subwoofers, which come standard with the SVS SoundPath Isolation feet installed. Due to my thick carpet, the driver cones were very close to the carpet. This model acts as a 10mm…
Designed to increase height and provide upward angle to the Luminaire shot timer on a LaSpaziale Vivalid or Lucca A53 espresso machine. Intended audience is anyone who: Has a La Spaziale Vivaldi or Lucca A53 espresso machine, and Has…
These are all currently available results.
