Counting matching models…
This is a complex model, gcode is not included, as modifications according to your application are assumed. For new downloads/builds use model version 8. Previous versions are deleted. Update available (Bullet_feeder.8.rsdocx) New bullet…
Please pay attention to a new version of this model, published here: https://www.printables.com/model/1044261-case-feedercollator-update . Complex model, gcode not included, as modifications according to your application are assumed.…
A simple hex key wrenches holder, attachable to case collator rod. Use M4 bolt + nut for clamp. Print instructions No supports, no brim, any layer thickness will do, infill 20 - 25%.
Stabile stand for Dell Optiplex 3060 series PC - vertical position.
Designed to fill Dillon primer tubes with primers, both small and large. This is a multipart model, print files are provided merely as sample, as modifications of print conditions on user side are assumed. Important notes: Device…
This is a complex mechanical device. gcodes not included, as modifications of the model are assumed and encouraged. rsdoc file contains the entire model in DesignSpark Mechanical format, the DS Mechanical SW is for free and I recommend to…
Stand/holder for Dillon 650/750 tool head and related accessories. If you have large die nuts or need to store primers slide assembly as well, check another model here:…
Wall mounted version of keyboard and mouse holder/stand. The rsdoc file contains models for large and small mouse, published stl, 3mf and gcode are for large mouse variant. No specific printing requirements.
Simple stand for holding 9mm Luger rounds during manual reload. Easily modifiable. Print instructions Easy to print, PLA material is suitable as well. In such case, generate new gcode.
Stand for PC builds, convenient for water cooled setup testing. Based on 20x20 Alu profiles, M5 bolts and corresponding nuts. For boards up to ATX size (adjustable). Front panel designed for ATX PSU, 3mm PWR and HDD LEDs, and 18mm PWR and…
This is an updated tool head stand, suitable for those having larger die nuts, or need to store primer slide assembly as well in the stand. No specific printing requirements.
Simple stand for holding .308Win rounds during manual reload. Easily modifiable. Print instructions Infill 15% for 20 rounds, 5% for 50 rounds model.
Complex model, with mechanical parts beyond the printed ones. No programming skills needed, basic knowledge about Arduino desirable. As designed, the cutter is quite large (can be downsized, of course), and the frame rigidity using…
Tubular case for cosmetic (or other) brushes or other items. I preferred long threaded section, you can easily cut the base thread leaving 3 - 4 threads. Print instructions No special requirements.
Easy to maintain - embedded magnets allow quick detachment. To attach to surface use either self-adhesive ferrite tape, or a metallic strip. Print is prepared for embedded neodyme magnets 10x15x4mm, gcode will pause at layer 111 to allow…
Simple stand for holding .45 ACP rounds during manual reload. Easily modifiable. Print instructions Default settings will do fine.
Case for MeanWell RS-25-xx switching power supply series with on-off switch and fuse (Schurter or equivalent). Print instructions Included rsdoc 3D source is easily modifiable, corner mount presented is designed for Ikea Lack tables.…
No special print requirements, use any crystal clear PLA filament for the LED diffuser part. Designed for “long” LED types, for example OSW5DK6E61A. 3mf and gcode files are created in Ultimaker Cura.
Easy to maintain - embedded magnets allow quick detachment. To attach to surface use either self-adhesive ferrite tape, or a metallic strip. Print is prepared for embedded neodyme magnets 10x15x4mm, gcode will pause at layer 111 to allow…
Designed for rotary encoders KY-040, eg. https://www.aliexpress.com/item/32462116984.html . Longer and shorter versions available No special print requirements. You can print with support enforcer or without - both ways will require a few…
For storage of one set of bullet and case collators/feeders and two feeder plates. Print instructions No specific requirements. No support, no brim.
Handheld push button case. Usage example - Wired Remote Switch for Mark 7 Autoloader or any other application, where handheld push button case is needed. Designed for 19mm push button, for example:…
Simple DHT11/22 holder (stand). Print instructions Default settings will do.
Primer flip box. No special print requirements.
Yet another toolbox. Print instructions Default settings will do fine. Infill can be reduced to 10%
Very simple storage box to store (and not spill) primers. Useful if you need to store primers without containing carton. Storage boxes are keyed to be horizontally attachable. Dimensions designed for S&B primer plates, and the model…
Power cord clip for Vileda Steam Mop - no more stumbling upon power cord when using the mop! Use as many clips as you find suitable. Print instructions Using Brim (included in G-code) probably not needed.
Simple print of breadboard plate for electronics prototypes. I recommend to add some self adhesive rubber pads to prevent sliding, eg. https://www.amazon.com/Square-Self-Adhesive-Rubber-Furniture12mmx12mmx6mm/dp/B00H8UTNY4 Spare space is…
Simple waste bin to catch and collect primers. Designed for 3/8" tube, model included, feel free to modify according to your needs. I printed from PETG (simply because I have plenty), I'd recommend PLA (less strings). I do not care about…
Add on low primer switch. Placed on original Dillon Primer check, used as signal source for Mark7 Autodrive or other external control systems. Microswitch used (for example): https://www.aliexpress.com/item/4000638031271.html Use CA glue…
The solution is designed to improve the target spotting during long range shooting. It uses technology used by FPV drones, planes etc. It consists of two basic components: The camera, transmitter, accu (1xLiPo 3S1P 2700mAh) module;…
Easily detachable small magnetic wastebox (e.g. for filament debris). Designed for 10x15x4mm neodymium magnets. Print instructions For Wastebox: Infill 15%, Support on build plate only For both pieces: If generating new gcode, do not…
This holder is designed for use with Dillon 650/750, as it attaches to the case/bullet feeder rod and is intended to hold “ Handheld case for pushbutton ”, published here on PrusaPrinters. The source model is published as well, so you can…
Magnetic stiffeners to eliminate vibrations using IKEA LACK tables as a stand for 3D printers. Print instructions IKEA Lack tables are popular as stands for Prusa printers but the high COG together with non-rigid and lightweight…
The tray riser prevents TX connector/cable damage during programming of FrSky 12XS with darkOne TX tray. As the tray original rear bottom supports are only glued to the base, there can be dimensional inaccuracy. The raiser left and right…
These are all currently available results.
