Counting matching models…
💚💚💚If you enjoyed the project please like it.💚💚💚 My remix of the thingiverse: https://www.thingiverse.com/make:1104356 A simple filament cleaner, three versions closed with a clip with different hinge clearance. One version closed with…
This is a filament cleaner with a print-in-place hinge and a non-breakable clip. After printing, insert the clip into the larger hole on one half of the filament cleaning device (the triangles on the clip are to face in the same direction…
This is a specially redesigned (MK4S @Prusa3d) 360-degree cooling system for the MK3. It is not a scaled-down copy of the version for the MK4S. This mod uses the original fan for the MK3S: 5015. The mod requires printing only four…
Clip for attaching the filament to the spool. My version of the spool clip - I modelled it on the clip I bought with the filament . I printed with PETG. Nozzle 0.4 or 0.6, layer 0.2 or 0.25. CONCLUSION 💚💚💚If you enjoyed the project please…
These will be variations of my original filament cleaner. Available at the link: https://www.printables.com/pl/model/759967-filament-cleaner Modifications at the request of the community. For the modifications I used, model version 0.3…
This is a toothbrush case with a print-in-place hinge and a non-breakable clip. After printing, break off the two built-in supports. Place the clip in the deeper hole. The second gif is the assembly instructions. I added clips to the…
I wanted to thank @SteveHanov - this is his brilliant idea for calibrating prints, I just tweaked it a bit.... I've corrected a miscalculation and adapted the calibration model to a 5mm diameter drill bit - it's more accurate than a screw…
Belt clip gt2 in short and long version. Requires a zip tie width of max. 2.5mm. The clip teeth have the original gt2 profile. I designed the clip for the Y-axis of my Artillery Sidewinder X2 printer (I used the short version) but it may…
These are specially designed for 3d printing reinforced replacements for the old and new versions of the BOSCH/SIEMENS/MIELE refrigerator door hinge bushing (00169301, 5384490). The bushings have built-in supports which have to be broken…
These are the handles for the MELLOW FLY ADXL345 (affiliate link) . Two for mounting on the extruder to measure the X axis, The v2 version for vertical mounting, the v3 version for horizontal mounting. The third for mounting on the bed to…
Intrigued by @PrintingPerspective's great material, I wanted to convert a dual drive (I chose the HGX) to a single drive with a lever modelled on the Prusa Nextruder. @PrintingPerspective 's great material:…
If you have a Sidewinder X1 or X2 and would like an enclosure for it but don't have room for a large enclosure. This project is for you!!! The project involved modifying the original enclosure so that the electronics had their own air…
Description: This is my fifth “NX” project (after ProtoXtruderNX , AeroXtruderNX , AeroHGXtruderNX , TitanHGXtruderNX ) adapting the HGXlite drive and a lever inspired by the NEXTRUDER from @Prusa3D . Although I designed and printed the…
The proposed modification to replace the ABL sensor with an inductive sensor makes sense if the printer is equipped with a metal PEI board. Additional comments. The PRUSA SUPERPINDA sensor has a standard deviation of less than 0.005. The…
Mounting frames for twisting two 2.5" drives on top of each other. When printed, the frames seem too flexible but when screwed together with the drives the kit is very rigid. Quick and economical to print. I printed from PETG. CONCLUSION…
This is a filament cleaner in special versions for mounting with PTFE tubes and/or with additional brackets for screwing to the printer. The cleaner has a hinge for printing in place and an unbreakable clip. After printing, insert the…
Bicycle crank cap m22x1 Print the model as it is loaded - you need to enable supports in the slicer. I used ironing when printing. I printed from PETG Nozzle 0.4 Layer 0.12 Minimum 5 walls CONCLUSION 💚💚💚If you enjoyed the project please…
This is an enclosure for the Orange Pi Zero 3 with expansion card and aluminium cooling frame (affiliate link). I have assumed that it will be mounted vertically, the cooling holes between the walls on which the expansion slots are…
My first attempt at multi-color printing with manual filament change. It is a cap with the Klipper and Mainsail logo. After installing the Klipper, the LCD screen is no longer usable, so after dismantling it, I had to somehow cover the…
If the two loosely connected idler-swivel halves bother you, this modification is for you. The original mechanism is brilliantly designed and I don't intend to change that - my modification only improves the connection between the…
Summary Wall mount holder for the DELL WYSE 5070 with optional power supply mounting. The modular design allows the holder to be used with or without the power supply brackets. Print Settings Material: PETG (recommended) Layer height: 0.2…
The proposed modification to replace the ABL sensor with an inductive one makes sense if the printer is equipped with a metal PEI plate. Warning. The LJ12A3-4-Z/BX (affiliate link) sensor has a standard deviation of less than 0.005 at…
This is a remix of @nhchiu 's brilliantly simple ProtoXtruder with a lever like @Prusa3D Nextruder and @Prusa3D IR sensor. The extruder has less axial play in the gear area. I redesigned the extruder looking from the axis of the filament…
This is a collection of several Mini SpaceMouse parts that I remixed for my version of the mouse. To build your own mouse, you can find the complete original project (including the parts I didn’t modify but are required for assembly) at…
This is a filament cleaning device with a print-in-place hinge and a durable clip. After printing, insert the clip into the larger hole on one half of the filament cleaning device (the triangles on the clip should be facing the PTFE tube…
This is a specially designed 360 degree cooling system for the Artillery Sidewinder X2 (fan duct geometry inspired by the MK4S @Prusa3d). It is not a scale down copy of the MK4S version. This mod uses the original 5015 fan - I recommend…
Project Description If you have a Titan Aero clone printer, would like a new extruder with a large gear to feed the filament, and don't want to spend $100 or more on a new extruder, then this project is for you. Benefits of the new…
These are the outermost brackets for the aluminium "C" profile. Aluminium profile section dimension: width 16mm, height 9.2 mm. The brackets together with the profile form the housing for the LED strip. In my lamp, I used a 420mm long…
The original model developed by @Kezat_23409 is well thought out but I missed the variable tilt account. A model with a variable tilt angle gives a better idea of the use of cooling and its strength. So I reworked the model for my own…
Tilting Stand for Glue Residue A stand for Tamiya and MrHobby cement, which tilts the bottle so that the contents gather at the bottom corner of the bottle. The bottle opening dimensions are 45x45 mm on the sides and 22 mm deep. Print…
Vertical mounting bracket for cisco epc3208 modem. Print with supports enabled in the slicer. I printed PETG nozzle 0.4 layer 0.12 to 0.2 CONCLUSION 💚💚💚If you enjoyed the project please like it. 💚💚💚 Post your makes and let me know how it…
A Few Words of Introduction This is a quick test designed to check print cooling efficiency across 360° without putting excessive strain on the printer’s mechanics. The printer can operate at a steady, uniform speed without unnecessary…
My remix of the small nozzle box. Parts of the box are interchangeable with the original @Guddy_467991. I printed the PETG nozzle: 0,4 layer: 0.2
My remix of the reduction of the diameter of 40mm to a cone of the smallest diameter of 25mm. I designed the model based on the original parts from the pool that I wanted to "assemble". But the original idea of @rebeltaz I kept. Making…
PEI sheet alignment bracket for Artillery Sidewinder X2, X1 bed. Print the second bracket in mirror image. For the project we need: - 3x PCB with a width of about 10mm or wider, the height should be selected individually according to your…
I redesigned UPPER BRACKED - reinforced with ribs and does not require automatic supports - added built-in support to be broken off after printing. I have not printed the design - if you do print let me know if the design does the job and…
My remix pool skimmer adapter for pool bottom vacuum cleaner hose. Reducing the diameter of 32mm to a cone with the smallest diameter of 25mm. I designed the model based on the original parts from the pool that I wanted to “assemble”.…
Simple spool holder for Creality enclosure. It allows you to place the spool inside the Creality enclosure during printing. For installation you will additionally need two M3x20 SHCS bolts with nuts. The released model has an improvement…
This is a holder that moves and improves the X axis endstop engagement by “2mm” for Artillery SidewinderX1/X2, Genius/GeniusPRO printers. Print and attach to the extruder mounting plate. I designed the mount for the new AeroHGXtruder NX…
Project Description If you have a Titan Aero clone printer, would like a new extruder with a large gear to feed the filament, and don't want to spend $100 or more on a new extruder, then this project is for you. Benefits of the new…
This is the YARN WINDER v2 MOTORIZED version adapted for the JGA25-370 motor. In the remix, I added: - GEAR_24 version for the JGA25-370 motor - YARN_Housing_bottom version for the JGA25-370 motor - YARN_Housing_bottom version for the…
Summary Wall mount holder for the ASUS AX-5400 router, designed for vertical installation. The design provides a stable and secure mount without modifying the router housing. Print Settings Material: PETG (recommended) Layer height: 0.2…
Description Fishing Rod Holder with M10 thread available in two versions: For rod handle diameter 35 mm For rod handle diameter 38 mm Designed as an accessory for fishing chairs and single ground-inserted support tubes. 3D Printing…
PC shelf for screwing to a cabinet wall or desk. Dimensions designed for the Lenovo IdeaCentre Gaming 5 Gen 7. The shelf is screwed through the wall of the furniture board. The head of the screw is located on one side of the furniture…
A 13mm tube end to protect the pump from coarser grit when pumping water out of the aquarium. I printed from PETG nozzle 0.4 layer 0.2 CONCLUSION 💚💚💚If you enjoyed the project please like it. 💚💚💚 Post your makes and let me know how it…
Replacement for tray trap cover for Radaway R400W SLIM, Wirquin SLIM 4cm, DRAIN HOLE: Ø 90 mm. Both versions have the same dimensions. Version 1 - smooth Version 2 - with handles Nozzle 0.4 or 0.6 Layer - as required Filament - any (I…
Hygrometer mount for the original Creality S housing. Mounted on a 16mm diameter side vertical tube. For mounting we need two 3x12mm screws and two 3x20mm headless screws. Mount the holder at the correct height and use. CONCLUSION 💚💚💚If…
Replacement plastic foot for domestic aluminium ladder with three steps and 33x20mm (thickness 1.2 mm) profile. In order not to reduce the strength of the foot, it is pressed horizontally as it is for loading the model. Printing without…
I have designed a new gearbox for the Titan Aero, the Titan Aero extruder has the same mounting as the Titan extruder. I decided to adapt my AeroHGXtruderNX design to the Titan extruder with heatsink V6. The TitanHGXtruderNX is a low-cost…
Dial indicator mount for Artillery sidewinder X1/X2, Genius. The mount installs in place of the Hotend 4020 fan. The mount allows you to mount the indicator in three axes, the hole for the indicator is 8 mm in diameter. Mounting the mount…
Pei sheet holder 310x310mm for original Creality Enclosure S Mounted on the rear vertical tubes 16mm in diameter. Print the second holder in mirror image. Mount the holders at the correct height and use. CONCLUSION 💚💚💚If you enjoyed the…
This is a locking mechanism for the handlebar-mounted basket on the bicycle. A locking mechanism holds the basket in place to prevent it from falling under its own weight. You will need an M5 screw along with a nut for installation. The…
Spool holder for Creality enclosure. It allows you to place the spool inside the enclosure during printing. The holder is designed for standard (1-1.1kg) and small (200-250g) spools. Changing the configuration is very easy (without using…
Description This is an end cap for the Lumines LED type A LED profile. I have attached two versions: The standard 35mm version and the extended “L” version with a length of 37mm. Print WITHOUT CHANGING the orientation. Print with ABS/ASA.…
What is this remix for? This is an alternative option for filling the base with ballast made from laser‑cut metal plates. The plate thickness is optional — the full stack of inserted plates should be approximately 8 mm thick. The set…
Description A strong, 3D‑print‑ready ground spike designed for a 20 mm aluminum tube (17 mm inner diameter) . Created for fishing chairs to improve rod stability by anchoring the tube securely into the ground. The model is available in…
Description This project is a precisely fitted heel pad replacement for SALOMON shoes, designed specifically for 3D printing. The model is fully optimized for additive manufacturing and includes integrated breakaway supports to ensure…
This is an airflow control ring for the telescopic hose of a Drainvac vacuum cleaner. Outer diameter of the tube where the ring is installed: 32 mm . Print settings: material: PETG layer height: 0.2 mm nozzle: 0.4 mm enable automatic…
These are all currently available results.
