Counting matching models…
UPDATED May-23: New sturdier hinge design. Details below. I didn't really like any of the boxes or nozzle holders I found. I wanted something minimal, quick to print and tidy. This little box packs up to 15 nozzles closely together,…
This is a simple mod for your MK3 to use it as a penplotter. The main design objective was for it not to interfere with printing and to not have to assemble or disassemble any parts to change from one to the other. I tested multiple…
This is a simple webcam cover. There are a lot of models on Thingiverse, but i just couldn't find one that printed well and that was usable, so I designed this one. It's easy to print at 0.2mm , works well, has enough surface to fix to…
This is an accessory for your Baratza Encore. It fits snugly into the grind bucket area and allows you to lean the portafilter and grind directly onto it. It also has a little tray that catches (most) of the grinds that overflow, so that…
I liked 3dfernando's Helping Hands , but I wanted a better way to hold them on to my really thin table and also more flexibility in being able to fix them to any other thing, so I thought they would remix really well with my Mini screw…
These are based on upperpeninsulaplastics's Ultimate Retropie Joystick Controller . Thanks for providing a .step file! These are the changes to my design: Tabbed holes that work for snap-in buttons All other buttons to front Moved…
This is a fully parametric spice rack, but also can be converted to a basic drawer system for pretty much anything else. The main goal was to have railed drawers with an endstop and have the structure be simple enough that it wouldn't…
“Look, ma: no stl!” I really liked Tony Youngblood 's Magic: The Gathering Counters . But I wanted to make a couple new ones using the updated symbols from MTG Arena. I was looking for an svg of the new symbols when I stumbled upon “ Mana…
I needed a mini-clamp to hold down my spool holder to my desk and mistertech's design was just about what I had in mind, minus the headphone part. I also shortened the clamp down to 20mm because my desk is very thin. I also wanted the…
I made these for 250ml and 125ml soft (HDPE or PETE) liquid bottles. The ones for e-liquid normally come with a twist-top cap that has a lot of backflow and leaks all over the place. Their tip is also extremely wide and I wanted something…
This is a remix of CH35C0 's Y belt tensioner for the A8 . The geometry seemed a bit off for my setup and I also wanted to upgrade the idler. This version: has a lower center for the idler, more similar to the original Anet design has a…
This is a handle that holds 4mm hex bits and offers more grip and torque. The shape is your standard no thrills hexagonal screwdriver handle design. I love my bit driver kit from ifixit; it has a ton of weird types and I've had it for…
This is a quick re-mix of a nice filament guide by papinist . I remade it in FreeCAD to clean up the lines and to correctly align the ring to the holder. I also moved the notch to one side, as in the front it was catching my filament all…
This is my take on LeFabShop's excellent handle that converts used Bonne Maman jam jars into awesome upcycled mugs. I made two small tweaks: There are 12 cutouts in the original design, whereas Bonne Maman jars have 10 sides. It always…
This is a parametric and light flower pot holder with a little cup to catch the water from excess watering, that hangs onto a ledge, shelf or window sill. They are intended for use with small pots; the ones in the photo are 10cm pots,…
I wound up with a silly amount of 40mm M3 screws that I will almost certainly never need and I keep running out of 20mm and 16mm screws, so I designed this simple jig to cut the screws. I've made versions for M3, M4 and M5 screws, and…
This is a remix of orax's great remix of the Multipart Pinecil Case . I printed his model and loved it immediately, but noticed that the clips didn't hold it closed. I didn't like the rugged version of the case I found here by other…
This is a remix of Kingmiwok 's revised design . It appears to be compatible with both newer and older A6 original power supplies. This version is much sturdier than my previous design and I much prefer to have the switch and socket on…
This is a tiny collet to hold flexible or irregularly shaped pens, that was designed with an Axidraw plotter in mind. It keeps pens centered and perfectly aligned for ink changes, and it fits perfectly in the Axidraw's holder. This is…
This is my take on a magnetic knife board. I've created a parametric model, so you can generate an stl with holes that fit the magnets that you have available or can more easily source. I had small magnets (15x6mm), and admittedly those…
This is remixed from RaquelBorrega_RGB 's fantastic LCD Screen Cover . I just took her plain non-filleted design and added an hexagon pattern, because at this point, after the front brace , the stepper brace and the mainboard box , I…
A case for the Anet A6 mainboard that fits the frame perfectly and in addition to keeping all the cables tidy and away from anything that can snag them, also has stanoffs for a MOSFET board for your hot bed. This is basically identical to…
This is based on mkfloria's design: Towel Horse . I wanted to incorporate that design into the suction-cup hooks that I have. They have a pump/vacuum action when you pull the hook down. I thought I could substitute the hook for a more…
These are all currently available results.
