Counting matching models…
UPDATE 2025-05-26 : Added “100mm-tube-connection”, to be used with https://www.printables.com/model/1337372 for ducting to IKEA UPPÅTVIND! UPDATE 2023-01-09 : Added the possibility to use a filter on the inside of the cabinet…
2023-09-05 UPDATE Please consider using the "circuitboard-cable-holder" to gain some clearance between the heatbed cable and the extruder cable as they might collide/rub against each other on bigger prints! Also consider using this model:…
UPDATE 2026-01-07: Fixed incorrect model for wheelbase-plate (yes, again). It now should match the pictures (_offset_2026 files). UPDATE 2025-12-10: My QR is still going strong on my rig, no failures! :) UPDATE 2025-04-21: Added STEP…
This will not fit the MK4 (yet). As space is limited in my cabinet I created a low-profile version of the "Smoothest Rolling Spool Holder". A filament-guide is highly recommended to avoid the filament tugging against the upper frame. 2x…
As I wanted the base in a different color than white, I made this from the original model. This model use the same distance for the screw holes as the TP-Link original mount. I made 2 versions with different tolerances, as the original…
License plates for RC 1/10 drift car, attach with double sided tape. Printed in 0.1 layers. Add color change in prusa slicer on the last layers to get multi colored print.
I found no suitable wall mount for my Teltonika RUT360 so I designed one with some inspiration from others (for other models, RUT240 etc). STEP provided for easy remixing. Screw holes are 5.3mm diameter, 10.5mm counterbore diameter with…
Angled mounts for 40x40mm aluminium profiles with 8mm T-slot.
Designed to be easily adjusted if needed for the perfect fitment, and works pretty well for walltaps due to the deep magnet cups! Additional hardware needed below, and pay attention to print orientations and mirroring the rear mounts. No…
This part replaces the “cam-track-cover” on the Yeethammer to enable mounting of shell holders. The part is designed for the left side, but can be mirrored (X-axis) in your slicer to fit the right side. You may choose to install 1 or 2…
As I could not find a simple and suitable wall mount that did not take forever to print for my Lighthouse (Index) I designed my own. Held in place on the wall with 2 flathead screws (max 4.5mm for screw diameter and 9mm for the screw head…
2024-08-19 Update Also see this model . ----- As snapoffs are epensive I designed this adapter and extension for my Fanatec BMW GT2 wheel to be mounted on my VRS DirectForce Pro wheelbase. 52mm (Fanatec) PCD to 70mm PCD adapter Extension…
As it was hard to source the parts needed for the Yeethammer here in EU (Sweden in my case) I had to do some remixing for it to fit an acrylic plunger tube of 36mm inner diameter and 40mm outer diameter from Amazon , cut to 145mm. However…
UPDATE 2024-04-03: I added a version for mounting on 4040 or 4080 profiles with M6 or M8 hex screws and T-nuts. For printing the VRS-BOX_4080* files, choose “Split → To objects” in PrusaSlicer. Then arrange the printing orientation…
Mount for the heusinkveld handbrake on 40mm aluminium profile using M8 screws. Hardware 2xM8 screws for profile 2xM8 T-nuts for profile 4x M6x20 screws 4x M6 nuts (4/8x 6mm washers) *Sorry for image orientation, I don't know what my phone…
As I found it hard to get a good surface finish for the label to stick to (for the recessed version), I redesigned the cartridge for easier printing without supports. I also had a struggle getting the label to the correct size and a nice…
Slide this cover over the Schneider Exxact housing (with the button removed). This enables easy access to toggling power if needed. Printed without supports.
My brother asked me to fix his Sennheiser GSP 370 that was no longer taking charge with the Micro-USB port. The battery was certainly not dead as it was working very well for hours (until flat). This mod requires you to drill in your…
As I needed a hook/mount for my Index headset near my simrig i designed this. It has been working very good and keeping dust out of the headset because of the orientation. For mounting on 40x80mm aluminium profile with M8 screws. A…
A small shelft bracket for mounting small shelfs inside my IKEA wardrobe that I use for hiding the hobby mess... Bracket is 85mm deep, 63mm high. Use no wider than 4mm screws. The bracket model is only for the left side, mirror it in the…
Designed to make it blend in better on my white wall. For the Edgerouter X non-SFP model. Press-fit. For use with PoE! No hole for PSU connector included.
Since the Tele2 Wifi Hub C2 (possibly also C3, not tested) does not have any mounting options, I decided that I would like it on my other “bekant” leg. Press the ring on the lower part of the leg and move upwards and place where you want…
A wall mount for the Philips Hue Dimmer Switch (v2) to use with Schneider Electric “Exxact” light switches. This mount requieres no drilling, taping or any modification to the wall. I created this since I was not sure if I will like the…
Design I originally intended to use magnets between the frame and the duct guide for easy cleaning. However the magnets (6mm diam, 2,5mm thick) where just too weak and it did just not seal good. So I ended up gluing everything together…
Hooks for putting your Yeethammer on your IKEA Skadis board. Printing Instructions Print in PETG. PLA will warp more over time under load. Print with at least 3 perimeters/walls and higher infill (gyroid) ~30% or more. Print 2 pieces.…
A hook for hanging your headset (or other things) underneath your table. Printed as pictured with supports.
I made a mount for my brothers racing simulator triple-screen setup, for the external monitor PSU's of his ASUS ROG 32" screens. The PSU's are dimension 76*29,5mm (max) each. Mounts to your T-slot using M8 (max) screws and T-nuts. Print…
I needed a smaller mount that worked with the original ball and lock nut for my Index Lighthouse. 2 models available. Screw holes are 4mm diameter, and screw head diameter max 8mm, countersunk 3mm. Printed in PETG with 3 perimeters, as…
I designed this bracket to slide into the Prokord LC24P mounting head for my G9 monitor not to tilt as much (flex the mount). The "Prokord Gas Spring Monitor Arm LC24p” is capable of a screen upp to 15kg, and the G9 is around 10kg without…
This needs to be printed in something heat resistant like PETG or ABS, PLA will most likely deform due to heat from the ESC. Glue the fan cover on the upper casing with CA glue. Use the 4 standard small screws from the old case to fit the…
A remixed grip for the Einstar Handle MK2 intended to be printed in TPU (others are probably fine) and glued to the handle. To be printed with the " Single Extrusion - Separate Grip" version handle! Go get the other parts from the…
Could not find a suitable thing to fit my PoE in my rack. So here it is, for the 15W Ubiquiti PoE adapter. Check the original model for blanks. And I also use the Anker PowerPort 6 to power some devices in my rack. The main "rack bracket"…
These are all currently available results.
