Counting matching models…
Note: the coned center section design saves print time (prior design required individual deposition points for 12 tiny dots that often failed, but that are eliminated here) and provides the strength needed to eliminate the vertical links…
Bigger! More planets! Faster planets! Even more counterintuitive! You probably have played with some planetary gears, they are cool stuff, especially those print-in-place herringbone ones. This “Counterintuitive Gear” model however has a…
A re-uploaded model from NASA 3D Resources of a 1U CubeSat. CubeSats are a type of nanosatellite that come in a variety of sizes, with the standard size being 10 centimeters by 10 centimeters by 10 centimeters, or 1U. CubeSats are small,…
40 to 60 mm visual guide design to make it easier to 3D model and design your creations without the need for digital calipers !
To explore the operation of a gyrocopter: Wikipedia is your friend. This is a wrenching competition game for kids and parents. The quickest wrencher wins! All joints are threaded, even the tyres. Three tools are available for…
Cable Management EcoSystem Convert your environment into Factorio! Simple Clip to hold cables +6 diffrent styles of Trays! And few more in files ^^ Simple mounting way! Normal Head Cap Screw M4 Heat Insert (4-5mm) Countersunk Head Screw…
I have no design or engineering experience and cannot guarantee the safety of or recommend constructing this project I call building blocks. It is designed for my nieces and nephews so that they could learn skills and test out theories…
Parts List Inventory of all parts needed for a full, mounted set of 12 wheels: Printed Parts Thumb Wheel (12) Separator (6) Assembly Wrench (2) End Cap (2) Stand Bracket (2) for each wheel x (A, B, C, D, E, F, G, H, I, K, L, M): Wheel x…
Spare gear for Bosch Multi-Purpose Slicer MAS 4200. Print instructions Unassociated tags: MAS 4200 Category: Replacement Parts Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: Yes Resolution: 0.20 Infill: 30%…
Add gears to the fun linkage construction kit. These are designed to be places horizontally and vertically adjacent although they may work in other ways. The tolerance is loose so should be easy to print.…
Ein Halter für den Zylinder in der AP1 2024 der Mechatroniker Prüfung.
3D MODEL FOR EDUCATION Printable 3D model for learning how to draw 3D and 2D Video of making this drawing: blank drawing sheet: https://drive.google.com/file/d/14v23UXPf2M007LxUcgTuwXfZ1SviG-vm/view?usp=sharing
3D MODEL FOR EDUCATION Printable 3D model for learning how to draw 3D and 2D Video of making this drawing:
Este es un modelo 3D que puede servirte si estas haciendo un prottotipo a escala de una celada de flotacion
Just a toroid propeller used as a decoration on the table. No mounting holes, so not usable for propeller things, just to collect dust :D Printed with tree supports, maybe it is possible without supports, but I was too scarry 😃
Spray proof vent test piece meant for electronic housing for another project but works so well I'm uploading it by itself. Hopeful helpful for someone else. Inspired by Slant3D's youtube video with some improvements. But I don't really…
Keeps the twisting charging cable in place. printed in PETG with standard settings, lh = 0,2 infill 8% updated to V2 (Fusion file and *stl file) Tightened the cable slot
4mm Thread Pitch, custom thread design that I used to better understand threads and bolting. Rather than try to copy a thread pitch optimized for other manufacturing methods I put some thought into optimizing for FDM printers. When I…
El Organizador de Escritorio Automático es un accesorio funcional y elegante fabricado en madera de alta calidad, diseñado para mantener el espacio de trabajo ordenado y eficiente. Este organizador cuenta con un mecanismo giratorio…
My students and I created these files for a STEM boat-building challenge. Students first tested their boats to see how much weight they could hold. Next, we placed the boats in choppy waters. Finally, we hot-glued the mast attachments and…
EN: To identify a fluid ring condenser or fluid ring vacuum pump or operating controls for switching this equipment on or off. DE: Kennzeichnung für eine Rotationskompressor, Flüssigkeitsring-Typ; Vakuumpumpe, Flüssigkeitsring-Typ. Zur…
This is a holder for the two probes for the Rigol Desk Multimeter DM3058 and others. I printed it in white PETG and laying on the side with support (for the clips)
This design is for anyone looking to ensure your structure doesn't move much during it's use. I don't know for sure HOW much this helps but it does help just slightly and only requires about $4 more of hardware.
This is a prototype implementation of the IWC secular calendar program wheel from the company's Portugieser Eternal Calendar’ watch. After studying two videos of the design, I adapted it for 3d printing using the program wheel of Shinsaku…
Metriccano is not only a good toy, but it puts the “rapid” back in “rapid prototyping.” There is a library of parts based on 10mm centres that can be fastened together with ordinary M3 screws and nuts. While it looks like a construction…
Jumper holder Anyone who has ever needed to plug a jumper into a place you can't get to will appreciate this. That was my case and that's why I made this. You can just slide the jumper on, plug it in, and move it to the side to slide it…
I have designed a precise pan-tilt system featuring a sturdy horizontal plate on top, adaptable for various applications. The system utilizes NEMA 17 stepper motors with microstepping, enabling finer control and higher accuracy in…
This is the CAD translation of a traditional Chinese yarn maker wheel (not sure if it is supposed to be translated this way). Designed in Onshape
Spool for solder wire. Size - as popular spool for ~100g (with 20mm hole) but it can handle less wire (larger internal diameter beucase of thread). Twistable. Print without supports.
This is a small case for the light sensor BH1750 which can be plugged into the Flipper Zero's GPIO pins. The BH1750 can be wedged into the slot and then wired to a tree and a two pin Dupont Connector which fit into the cutouts on the…
Edit log: Date: 05.10.2025 | First Upload So far, whole rack is designed for 250x250x250 mm beds on the 3D Printers. In the future I will upload version for 180x180 mm beds, especially for A1 mini fans ;). Date: 05.11.2025 | First Upload…
This DIY scissorslift model can be a great intro into engineering principles for elementary and middle schoolers (K1-K6). Besides the 3d printed parts, you need two syringes, two bamboo skewers, 8-10 inches of silicone/aquarium tubing, a…
One set of XYZ-RPW double-bladed axes. For the aerospace engineer/lumberjack with a good sense of direction/humor. Also has the non-bladed zero-support type of axes if that's what you were looking for. 🙄 Note: The roll-pitch-yaw direction…
I created this model to hold my Canon LP-E10 batteries in place on the charger because the spring would push the battery up and prevent it from charging. This Model was created in Fusion 360. Enjoy!
This is the perfect business card for a 4 X 6-inch card. I made this for my dad, and he loves it. You will too!
Take working mortar shell prints, then attach the detonator you will take from any pump action shell to the end, fill it with explosive, put a nail on the end to activate it and tape it lightly.
All the parts are designed so that no post-processing is needed (removing supports, sanding...) and no external parts are needed (except for the belts). Happy printing By giving a vibratory motion to the lever secured to the semi-circular…
This educational model is a 1-to-1 replica of a single-cylinder engine from an Einhell TC-PG 1000 gas power generator. The section cut through the crankcase and the cylinder makes all functionally crucial parts nicely visible. It shows…
It's finally ready! This eye-catching design is a must-have addition to your engine collection. About the original engine: What we have here is a “lost” jet engine design the Propfan, that was intended as a fuel-saving alternative…
Components used : BLDC 5065 140kv BLDC motors : https://amzn.to/3Hg6zxa MKS XDrive board : https://amzn.to/456QqmO Bearing 20x27x4 (12 pcs) : https://amzn.to/46OaAmP Bearing 25x37x7 (2pcs) : https://amzn.to/3H3fCBD M3 wood screw pack :…
This model fits over the top element of a 7m Spiderbeam mast, has zip-tie holes for a toroid and strain relief holes for the antenna wires. The large holes fit a straight BNC connector, with the hole on the other side supporting a third…
This is a mount designed to work with 7.5mm DIN rail from Pheonix Contact. It allows an Arduino to be mounted to the rail with an I1 Interlink Shield from Atlas Scientific inserted. It also has a slot to allow a mount to be installed for…
This my first attempt at a turbo jet engine prototype. Jet engines get HOT, plastic will not work for a functional model, it is (unfortunately) just for looks. This model is far from finished. I figure someone might want to do some…
A headphone measurement rig built around the minidsp umik1. If you make different baffle insert for it, it will probably also work for there mics.
Mount for GPS, ELRS Antennas, XT60, VTX Antennas This 3D-printed mount is designed to securely hold both a GPS module and an ELRS antenna directly on the housing of a video transmitter with an XT60 connector. It offers a compact,…
This motor is 80mm in diameter and is fully 3d printed in three parts; the stator, stator base, and rotor. It uses 12 10x3x60mm magnets and has 18 coils. You will need the magnets, 2 8mmx22mm skate bearings and a 8mm rod(at least 100mm in…
Gyroid Lattice Structure. Added solid platforms. Ready to print, no support needed.
Diamond Lattice Structure. Added solid platforms. Ready to print, no support needed.
My Educational Mechanical Examples Series This model is one of my educational mechanical mechanism examples on 80mm x 80mm base plates. You can find all models in the series in this collection => [Mechanical Mechanism Examples] This model…
Gyroid Lattice Structure. Added solid platforms. Ready to print, no support needed.
Kelvin Lattice Structure. Added solid platforms. Ready to print, no support needed.
After much time, I'm proud to release my Mini 1/3rd Scale Allertor. This project is something I've been working on since the beginning of 2025, however I've been wanting to make one since 2023 when I first got my 3D printer. And I'm happy…
Mg90d servo https://share.google/E6KvHXBPQiiqf0F3B Laser pointer https://share.google/aNgYr9M2GAukybvdS The laser must be supported by paper so that it holds and does not fall out. both servos can rotate 270 degrees
This project is a fully functional I5 engine model designed for 3D printing. It features: Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1‑2‑4‑5‑3, 🔩 Assembly Details The model is assembled…
Intended for use with the EDU Wind Tunnel Github Repository to add Arduino based airspeed measurement and control to your Modular STEM Wind Tunnel project. See the GitHub repo for full documentation and details of use.…
These models and experiment sets are featured in this YouTube video: You will need the latest version of OrcaSlicer. As of 11/15/2025, you will have to do this: 1. Go here: https://www.orcaslicer.com/download/ 2. Download the nightly…
I made these mechanical logic gates in FreeCAD to teach computer science basics to a younger group of students. Printing recommendations: PETG (PLA springs wont last), no supports needed, AND gate pivot point will benefit from increase in…
Description Some months ago I first saw Disney's Holo Tile treadmill. I was intrigued by the concept and wanted to make my own, purely mechanical version (without all these fancy electronics and magnets). The use cases for my current,…
This chip can rocket kit was designed, simulated, and flown using the snack-sized chip can featured in the photo. Longer chip cans may also be used but are untested. The design utilizes the nose cone for housing the recovery gear. A two…
An overhead valve engine , abbreviated OHV is a piston engine whose valves are located in the cylinder head above the combustion chamber. In this model the valves are operated by push rods. The boxer engine is commonly used in aircraft…
modulární stojánek na papír formátu A4. Cílem bylo navrhnou a realizovat stojánek na papír formátu A4, který se bude využívat pro prezentační účely k různým projektům. Papír by zde měl mít možnost orientace jak na šířku, tak na výšku.…
This project is a fully functional V8 engine model designed for 3D printing. It features: Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1-8-4-3-6-5-7-2, Fully printable timing chain, Can be…
This is a wheel to fit onto a skewer for a balloon powered car or other STEM project. The inner hole is 4.2mm and might need to be drilled open slightly to work with your skewer. I printed the wheel in Petg and the tire in TPU. Pla or…
Mold used for hydro gels Theres two diffrent style molds one you just pore you solution in other has insert
Pls test the fit for the Antenna. Screws where glued in with super glue
While not a true remix (this one was designed from the STEP file of the V5 battery provided by vex), this model was inspired by seeing the charging sleeve here ( https://www.thingiverse.com/thing:3608551 ). The docks are designed to be…
2x4 (lego) brick. It works and fits on legos! I had a lot of fun designing this so please give me a like! Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: No Resolution: NA Infill: 20% Filament: Creality PLA…
MOTOR: https://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?langId=-1&storeId=10001&catalogId=10001&productId=2258574 Since these motors are extremely cheap and you can buy like 10 in bulk, I'd recommend purchasing a lot since…
Edit 1/30/26- thickened plate and added an extra hole to allow the bolt to countersink Will fit standard crazy cart using stock controller mounting holes and one side hole from the plastic covers Reuses the original mounting screws for…
This model is a really cool knife that can actually cut humans and other organic tissues really well. The knife is basically an aligner for a piece of paper that does the cutting. It prints in two parts, simply slide the blade into it's…
This is a complete 3D-printable mounting system for a DIY sonar project using a servo motor and ultrasonic sensor. The set includes: Servo casing Ultrasonic sensor casing Arm mount for servo rotation Breadboard mounting base All parts are…
Engineer Hassan Zain created this project to move the tea bag. He published it on YouTube and it got 26,000 views. You can print it and make it for free! What are you waiting for! any 3d printer can print no soldering free code
Tento model je 3D tištěný měnič diafilmů formátu 24×36 určený pro diaprojektor Medirex H (Meopta). Model se skládá ze čtyř samostatných dílů, které je nutné po vytištění slepit dohromady. Pro lepení jsem použil: Pattex menší a jemnější…
Showcase the incredible versatility of 3D printing and modern filaments with this organic 3-way manifold sample. Designed to look like a complex technical automotive part (like an exhaust collector or intake), this model serves as a…
Parabolic mold for nose cone. Used for wet fiberglass layup in an undergrad aerospace eng. lab design course at UCLA
Modified so that all of the hexagons are flat on the plate. The original had some defects .
I added an ohm symbol to the basic electronics stencil. I had found another stencil that also had the common unit symbols (A W V <ohm>) and thought it would be nice to add those, and then realized that really only Ohm was hard to…
This is an case for 4 AAA batteries, without contacts, but maybe you have those metal plates with a spring on it ;)
Second iteration of model rocket being designed for an undergrad senior aerospace engineering lab project at UCLA. Requirements/Goals include: Two-stage rocket Vehicle must use commercial solid motors with a combined total impulse < 100…
Secure together using self-tapping screws. Mount a 9v battery to the back using tape or battery holder.
A small model rocket nosecone with holes for peg attachme and a compartment to fit a Pnut/altimeter inside.
Generic 28BYJ-48 Stepper Motor Adapter, printed on a Prusa i3 mk3
Mini size model of Mobile Offshore Drill Unit (Non-Scale). Supports are needed for printing.
