Lightweight Boomerang V2 (6-Winged) – Under 10g, 30+ Min Flight and center hole
3 winged boomerang 4 winged boomerang 5 winged boomerang
- Downloads
- 1,360
- Likes
- 246
- Rating
- 3.5
Counting matching models…
3 winged boomerang 4 winged boomerang 5 winged boomerang
2 winged version 4 winged version this is 5 winged version 6 winged version
Carry a little piece of your fandom with you everywhere! This Huntrix keychain is inspired by the K-Pop Demon Hunters universe and designed with fans in mind. Compact and durable, it’s perfect for clipping onto bags, keys, or lanyards.…
Rack mount for cheap 2.5GbE switches with 1 SFP+ port. Use one of the models from the original model to fill in the other side. This includes a backstop and block to hold the power cable. These 2 features require support, but no other…
Problem: Recently our dishes coming out of the dishwasher started tasting like our dishwasher detergent. First we were using pods, even after switching to a different solid detergent in powder form after a couple of rinses we had the same…
These are 3D-printable shotgun chamber flags that fit directly into the chamber and stick a big bright plate out the side so it’s obvious the gun is clear and unloaded. I’ve included models for: 10 gauge 12 gauge 16 gauge 20 gauge 28…
1U rack mount for for the Unifi PoE++ 10G injector. The 19-inch version comes in two halves, which allows 1-6 injectors per rack unit. The 10-inch version is a singular piece, which allows for 1-3 injectors per rack unit. There are also…
A low profile PCIe bracket for the Dell/QLogic 57810S dual port 10Gbps Network card. The bracket is 1.6mm thick. Printing Print with screw holes for PCB flat on the build plate. Material: PLA or PETG Print Settings (PrusaSlicer): 0.20mm…
The scoop is easy to print and amazing to hold, which is a great helper for every coffee lover. It holds approximately 10 grams of coffee beans (when full). A hanging hole has been added to the scoop for hook storage. Files are available…
A wider version of my previous remix. Looking for a bit more stability for the wider WAGO 221-61x units. All credit to the creator! These work great on the 10GA 30A WAGO units. I did mine in PLA with 3 perimeter walls and 20% fill (which…
2026-06-22 Edit: Added an offset relief hexagon version with a 21 mm offset to account for a PCI-E riser. Thanks @ichigio for the request! 2026-01-14 Edit: Added a middle ground, with relief hexagons. 2025-09-19 Edit: Added a solid…
— — — Edit 11.06.25 Added CAD files — — — I couldn’t find a 10-inch rackmount that fit my MokerLink 2G080110GSM switch—so I designed one myself! The switch slides in from the back and is held securely in place by built-in hooks,…
This Metric T-scriber allows you to draw a parallel line to a workpiece for drilling or cutting distances from an edge. cm on long axis, mm on short axis Usage: 1. Align the edge with the workpiece, text up 2. Insert a pencil into the…
Test para configurar y testear los soportes. Relleno:5%
This is a remix of the bollio's original model on thingiverse . I have added some cutouts to improve airflow. The original auther stated that this baffle was for the Mellanox ConnectX-3 CX312A. But I have a CX322A, and it works just fine.…
Matching rack ears for 10 inch racks 20% infill, 5 perimeters
Adding 10G and Sata functionality to the Beelink ME Mini
Shroud for mounting 4010 cooling fan. Use M3 heat inserts.
I was really happy someone created a solution for the larger 221-61x version of the Wago. I did a remix that allows it to be surface mounted. Hats off to the originator, his geometry is right on. I just chopped off the DIN clips and added…
This is a v1 of a model I made for SFF cases and the ASUS 10g networking card. It works great for me and the screw holes are a perfect size for the ones that unscrew from the metal full size bracket. Feel free to reach out if this model…
This is a gas canister stand for your canister stove. It doubles as a cap for the canister to protect it from dirt and grime. It's very low profile and will likely fit in anything that will fit the canister itself. I can put the canister…
if no model is here yet then i didn't make it
Sharing a simple custom-designed SFP+ DAC Connector Cover for all the fellow network/home-lab-savvy forumers here. This cover is perfect for lazy individuals (like me) who do not want to unplug their cables but keep them protected and…
Ideal for filament scraps 55x45 mm; 3.6g 75x 60 mm; 6.6g 95x75 mm; 10g Have fun printing and thanks in advance for your makes, likes, and feedback.
BOM: Printed with ROSA3D High Speed PLA Gray Need a funnel right now? This model is designed to be as efficient as possible. Weighing in at only ~10 grams of filament, it prints incredibly fast while remaining sturdy enough for everyday…
No excuses—always get your creatine in! This heavy-duty container keeps your supps locked in. A compact creatine travel organizer that holds exactly 8-10 grams when filled completely (tested)—so you can skip the scale on the go! Designed…
This model allows for the active cooling of most varieties of X540 10GbE NICs, including a modified model that works better on some of the actively cooled units that are more prone to fan failure. It positively engages with the metal rail…
No supports nothing. simply print….
I made this remix to add 2.5g switch to rack together with my old TPlink switch. the switch model i have: https://www.aliexpress.com/item/1005005943823096.html left side is printed from original model here:…
The Nokia ONT G-010G-R supplied with my fibre optic connection should be screwed into the 19’ rack. I designed a corresponding housing for this, which fulfils its purpose.
Hier ein Spoolen Gewicht für die neuen Sunlu-Filament Rollen. Kann man mit 5x AA und 1x AAA Battarien bestücken. Gedruckt aus PETG mit 2 Wand und je 5 Ober- und Unterschichten. Gewicht mit Battarien ca. 210g
Summary Here you will find a slim, elegant, and ergonomic stand / riser for your Apple Magic Keyboard & Trackpad. The slight elevation at the back ensures fatigue-free typing during use. Optimized for fast print, less material consumption…
Modeled after the Fender Frontman guitar speaker
Holder for a fan that can be used together with an Intel X540-T2 10G network card. These cards are also sold under the brand "Inspur" and heat up quite quickly during normal operation. The temperature reaches values that can even damage…
I made a little bracket to properly mount a dual SFP NIC inside my Lenovo Thinkcentre M720Q. Small slots for the LEDs are included. The model has holes for M3-inserts. It is printed with the outside facing side downwards.
3 winged boomerang 4 winged boomerang 6 winged boomerang
Took the idea from @alignboytw on Thingiverse ( https://www.thingiverse.com/thing:4684057 ) and created the same basic clips for wire spools in 5 sizes. Hope somebody find this useful! Print instructions Category: Organization Summary…
Replacement full height / long PCIe bracket mount for QNAP Dual Port 10GbE SFP NEC
This is a fan duct to fit a 120mm fan to the underside of a Mikrotik CRS305 10G switch, for extra, quiet cooling of the processor and SFP modules. It attaches to the switch by sliding a pair of lugs into the switch's wall mount screw…
Switch Dimensions Exterior 197.1 x 73 x 29 mm ( 7.76 X 2.87 x 1.14 inch ) distance between mounting holes: 129.5 mm ( 5.1 inch ) measured 43.5 mm from front measured 29.5 mm from rear Created YS25-0802 parameter set in my fork:…
Mine came with only a half height slot so I made a full height PCIE slot holder for them. Exact model is from super micro - Intel 82599 10 GB Dual Port Network Card
A low profile bracket to suite the Dell Broadcom 57711 10gb network card. Part numbers KJYD8 / 0KJYD8 Print with tree supports.
Printed with ERYONE PLA 180°C With support PRUSA i3 MKS+
This is a wall or back of the desk mount for a QNAP 10G switch. I mount this on the back of the desk and slide the switch into it. It sticks out a bit, but there's plenty of airflow to keep things cool, and it gets things out of the way.…
I want to minimize cableclutter as much as possible for my 10"-rack (by MandicReally). This 90W PoE+++ injector from Ubiquiti (UACC-PoE+++-10G) is a big honker so I decided to design a 2U mount instead of having it laying in a messy tray.…
Many forum posts about issues, where the AD3212KB-K71 fans on actively cooled Intel X540 cards are loud and/or unreliable. For my X540 cards, I designed this adapter to swap out the loud little fans with quieter 50mm fans. The bracket is…
10-inch 1U rack mount version for YuanLey YS25-0801 ethernet switch. Printed the ears with long edge on build plate. Source: yuanley_YS25-0801
Wanted to incorporate another model in my setup. This time instead of modifying or modeling the rack mount shelf, an existing OpenSCAD library suitable to the purpose was used. Found https://github.com/wildegnux/universal-rack-shelf in…
Full instructions and description for creating this magnificent work of science located here: https://ganon.club/index.php/2019/04/04/getting-10gbps-on-a-skull-canyon-nuc-without-thunderbolt-3-ngff-to-pcie-x4-riser/ In summary: Print this…
INTEL X540-T2 10GB PCI network Card FAN MOUNT SCREWLESS Print Settings Printer Brand: Robo 3D Printer: R1 ABS + PLA Model Rafts: No Supports: No Resolution: 0.3 Infill: 25% Filament: 3D Solutech PLA Red Category: Computer
Simple rack mount (left side) for a mini 10gbit/2.gbit switch. I'm sure its rebranded under other names as well Brand: Motiedot Model: K0402WS Dimensions: 133mm x 67mm x 33mm
40mm Fan shroud designed for Intel X540-T2 10GbE NIC's, will also fit some X520 models, 1U and 2U variations, options for extended heatsink coverage and bottom/top fan mount. 2U card fans are friction fit or can be mounted with…
I was tired of getting the last bit out of the protein bag
If you're not good at diy, I'd recommend enlarging the enclosure by 10-20% and reworking the internals for easy pcb moun Don't forget to download the pcb model 👇 Gilmouse 模块化鼠标 PCB Mod 套件 – 吉尔摩设计
The narrow case is designed to hold Chipquick 10g flux syringe
My HPE Ethernet 10Gb 2-port 560SFP+ Adapter came with a small backplate and I needed a tall one, so I modelled one in 3D. Note: I printed this model and I am using it, but I did not put a lot in effort in refining and optimizing the…
Here is a simple case that you can put a 10Gtek media converter into and mount on the wall. Included is a lid if want (Should Fit Most Converters)
Spoon holder (light weight) PETG, NEED SUPPORT Weight only 10g!
Rack side mount for Ubiquity 10G PoE++ Adapter (60W).
Full height PCIe bracket for Inspur YZCA-00431-102 network card Heavily modified remix of this model
Remix of the model by Exen to have less air gap for the smaller heatsink and make it compatible with PDC004 USB C board
A 1U bracket to mount a Sodola 8x2.5G + 1x10G SFP Switch in a 10-inch rack I designed and printed the Skeleten , a 10-inch rack to house my homelab. I wanted it to contain everything I needed, except maybe a NAS. From top to bottom: 2U -…
printed in PETG
Half Height, low profile PCI bracket for HP NC523SFP 10Gb 2-port network adapter Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.20 Infill: 10% Filament: 3D Solutech PLA Silver Metal Notes:…
Simple low profile bracket for 57810S 10gbe version which I am using with no issues. Print it screw hole side down, with support. I used ASA, but PLA would do. Not sure about PETG, might be too flexible. For reference, I used an enclosed…
My model is a 10Gtek GT-G0101. Print both the body and the retaining clip and throw it in your rack!
This is a very simple bracket to install single port Mellanox Connectx-3 card into a Lenovo M720q tiny. The bracket does not require any support, once printed, snap or cut off the part on the right, stick it through the protruding pins…
This a CAMLOCK Adaptor for the Bosch CM10GD Miter Saw. 43mm ID. It may work on other bosch saws if they have similar dust ports. Let me know in the comments and I'll modify the description. Printed at 0.2 with 25% infill and 6 wall loops…
Mount a generic Amazon/Aliexpress 2.5/10G switch to an IKEA Skådis pegboard
I needed a mounting plate for my AOC STGN-I2S network card to install it in my Lenovo M910. Since I couldn't find one that fit my network card, I decided to design one myself. It worked well enough for me to mount the card neatly in the…
A 19" rack mount for the SODOLA 8-port 10g switch. The model is not 1000% perfect but holds the switch in the rack. Fan that fits: ARCTIC S4028-6KARCTIC S4028-6K. The fan must be controlled via another server. I would print with ABS or…
I created this model to adapt a proline badlands MX tire to an old RC10GT that I converted to electric drive. I printed in PETG with the outer face down on the build plate. It has held up pretty well so far.
Verry snug fit, needs a bit of a hand and wiggle
This is a 1U, 10" Rack mount for the Mokerlink 2G040210GSM Managed Network Switch. You can find the Onshape document (along with all of my 10" rackmount designs) here . I have also included STEP files. To securely mount the switch, it…
a rack mount for the nokia G-010G-R / G-010G-T ONT -to make the ont so it doesn't slide out, i used some cable ties.
This is a clip-on 40mm fan shroud for the Inter-Tech ST-7211 10Gb SFP+ Network Card. Print with supports -→ screw on fan -→ clip onto heatsink In order to connect the fan to the network card you may need so solder a JST-XH 2 Pin connector…
8 Port X 10Gb Base-T Ports, NICGIGA 10Gbps Network Switch Required a frame to mount the Ethernet switch to a wall. The Size has Been Adjusted from original to Fit different Device. 182mm x 45mm Very Tight Fit, Just Force it. I printed on…
A quick design to hold a QNAP QNA-T310G1S or QNA-T310G1T ( https://www.qnap.com/en/product/qna-t310g1s or https://www.qnap.com/en/product/qna-t310g1t ) on a Skadis panel. It uses the Universal Hook…
A 10-inch rack mount bracket for the Unifi PoE+++ 90w injector (UACC-PoE+++-10G) and the Flex Mini 2.5G (USW-Flex-2.5G-5) Be sure to print this in a more heat resistant material, the injector gets hot enough to warp PLA! I printed mine in…
[Printed in Silk Silver, 10% infill, .2 height] - Original Reddit threat on /r/NUCLABS: https://www.reddit.com/r/NUCLabs/comments/dnzeu1/intel_nuc_5i3i5i7_series_10gbe_connectivity_debut/ You want 10Gbe connectivity in a Gen 5 NUC, and…
My HPE Ethernet 10Gb 2-port 561T Adapter came with a small backplate and I needed a tall one, so I modelled one in 3D. Note: I printed this model and I am using it, but I did not put a lot in effort in refining and optimizing the model. I…
This is the IO shield for Topton NAS motherboard N100, 2x2.5G and 1x10G from Aliexpress. The shield partially covers the HDMI/DisplayPort but does not block it.
Rack mount for Nokia Fiber Modem, which provides easy access to the connectors, while keeping the LEDs visible as well.
i use klipper, and cure: paste this for in cura, in "START G-CODE" START_PRINT BED_TEMP={material_bed_temperature_layer_0} EXTRUDER_TEMP={material_print_temperature_layer_0} here is my macro : [gcode_macro START_PRINT] gcode: {% set…
Bracket for Intel NIC X710-DA2 by Dell for the Lenovo M720q. The bracket has: Small slots for the LEDs are included. Holes for M3-inserts. Aditional holes for ventilation. Recess for USB cable. It is printed with the outside facing side…
Mounting adapter for the IOCrest 10GBE m.2 NIC PCB. Fits in one of the 19mm holes in the Formd T1. Infill - 40% Supports - Yes, block out mounting holes Adhesion - No Print with mounting hole side flat on printbed
I needed a 10" rack mount for my router. 👍 The router press fits straight into the print. I needed to remove front feet 💪 I suggest PETG, but i made one with PLA that held up fine until i printed one in PETG. No supports needed. I…
Made a simple mount for the HP Procurve 1810G-8 so it will fit my 10 inch rack! Could work with other models not sure. You need 4 M3 screws!
I needed a carabiner for few things at home and wanted to create mine so there it is. Printed with PLA, 15% infill, 0,2 mm layer height. No support and only 10gr of material. Tested with 15 kg load and didn't break but of course never use…
This is a recreation I did in CAD for a standard skeet 12ga shotgun sub-gauge tube knockout tool. Barrel inserts are full length tubes that convert a 12ga shotgun into either a 20ga, 28ga, or 410ga shotgun for the purposes of competition…
Beschreibung Beschreibung: Es ist ein Modell der Boeing 777-300. Ich wollte ein filamentsparendes Modell mit kurzer Druckzeit. Dazu kann man auch die Fenster sehen. Dieses Modell ist (hoffentlich verständlich) nichts für die Leute, die…
I run Intel NUC's in my server rack for my virtualization. I wanted a way to properly hold the QNAP thunderbolt to 10gbe SFP adapters rather than just resting them on top of the NUC. The print can hold the adapter in any direction…
Holds 6 or 12 of the 10gram Super Glue tubes. Prints well in PLA, no supports needed.
📈 Help me growing! ☕Or buy me a coffee: https://buymeacoffee.com/psoa This model is free to download for personal use under the standard Printables license . If you'd like to support my work — and help me keep designing and sharing more…
I made this mini rack will be mounted under my desk for easy access to my high-speed intranet. It is mounted under my desk with 3 wood screws. I have reserved a screw mount at the back, so it is possible to design a stand-alone version.…
A 10-inch rack mount bracket for the Unifi PoE+++ 90w injector (UACC-PoE+++-10G). Be sure to print this in a more heat resistant material, the injector gets hot enough to warp PLA! I printed mine in ABS. Supports are needed for the…
Quick screw down bracket for a MokerLink 2G05110GSM network switch Using two of these on each side of the switch For mounting the switch with the ports facing sideways. It is ~ 0.5mm in height less than the thickness of the switch so that…
I needed a mounting bracket for my cute little Mokerlink 2G040210GS Switch (4x 2.5Gbit and 2x SFP+) and this came out. Since i have to use 10Gbase-T SFP+ Transceivers i also wanted to add some active cooling for them. They get HOT. It…
A set of rack mount ears for a NICGIGA 2.5g switch , and an additional option for also mounting a SODOLA 10g SFP to ethernet media converter . May work with other brands of switch or media converter, there are many seemingly identical…