Laser Engraver Air Assist Longer Ray5 10W
Laser Engraver Air Assist Designed for the Longer Ray5 10W Module To be printed without brim/support. 0.3mm layerhight 18mm mounting diameter 8mm air tube M3 Screw and Nut
- Downloads
- 706
- Likes
- 56
- Rating
- 5
Counting matching models…
Laser Engraver Air Assist Designed for the Longer Ray5 10W Module To be printed without brim/support. 0.3mm layerhight 18mm mounting diameter 8mm air tube M3 Screw and Nut
Have you felt like your Snapmaker 10W Laser Module is missing one key feature - an Air Assist System to reduce scorching when engraving or cutting? At least I have. After I saw a really cool mod by german YouTuber Raagnarix (that involved…
This air assist for the Longer Ray5 10W module uses only two 3M screws to hold it in place. I used some 4mm Inner, 6mm Outer air hose. I printed it with a raft to help hold it down and you don't need to use supports if your printer has…
This is a simple plate that is 3.8mm thick with a little handle on one side. To use it, lower the acrylic guard down onto this plate and tighten the screws. Then the laser will be in focus for the material you are using. I'm not sure if…
Wandhalterung für den Air Assist von XTool. https://amzn.eu/d/8GEQkoJ
Laser spacer (10W) to easily adjust the laser material distance. The tower is 5cm which is exactly as high as the metal spacer provided with the Longer RAY 5 but fits better into the V shape on the back. The plate puts the laser at the…
Rackmount for Ubiquiti UniFi Switch Ultra 210W (USW-Ultra-210W). 3 screws betwen : ISO 10642 (DIN 7991) M6x20 + Square NUT M6 10x10x3 I used PETG.
Adapter for LG portable standing/rolling 9000 BTU AC unit, model: LP0910WNR May fit other models as well. I wanted something to replace the flimsy plastic panels included with the unit, so i made a more solid window panel with a wood…
Mine broke. Without all paper lands on the floor. Models: DCP-T310 DCP-T510W DCP-T520W DCP-T525W DCP-T710W DCP-T720DW MFC-T810W MFC-T910DW MFC-T920DW KAS-T310
Corner mount for tapo camera C520WS C510W I made the model so the camera holes fit in those models, if you need any other size just let me know or remix it. I've also added a PDF with the 1:1 scale of the entire thing, just print it on an…
I needed a wall mount for my switch's PSU so I made this. It's designed for the #6 screws I had on hand, but you could probably get away with another kind. The screw hole is 6mm. I printed mine in PETG for the extra flexibility.
Easy to build 10W Laser Engraver using mostly left over printer parts.
Air Assist for Creality Falcon 10W, does not require cutting the original acrylic, this will replace it. Height is same as in original cover, so the calibration stays the same. I already had a compressor, so I designed this. I use a air…
Corner mount for Tapo cameras - C520WS (likely for C510W C500 C530WS too). Enough space within to hide the cables.
Laser engrave tall objects with this dedicated mount. After removing the Ender hotend, screw this mount onto the X carriage, and slide the laser into it. It is designed to print the way it is oriented. Print with a 5mm brim to stop it…
UPDATE V1.1: I noticed some things weren't reflected in the model. FIxed and reuploaded. Reference model of CPAP blower fan model 10ws7040 often sold by Mellow as a part cooling solution. You can get this fan here:…
I made this to help lock our laser engraver to the table, while raising it above the honeycomb plate it came with. I included spacers for larger pieces of wood/projects as well. Let me know if you have any feedback!
I had issues with one camera after a heavy rain. I decided to design and make this rain cover to prevent any further issues with water. v4 has extended lengths and drip edges all around to prevent it getting any water on it even in very…
Fit with stock magnets. Airassist for better cutting edges and cooling.
I built a DIY laser engraver around the Comgrow 10W laser module , and decided to design an air assist for it that replaces the existing laser shield. This should also fit the Comgrow Comgo Z1 module. This will work with a ~6mm air hose,…
Light and easy to print case for 20x gobo set and a gobo template
This is visor for 2x10W headlight which is used also for Nami Burn-e e-scooter. (Also called as " Work light 12V " on Aliexpress. When you switch lens from original 6D floodlight to 2D lens, this visor helps to to cutoff your light to not…
This tool helps align the laser with the material to be engraved for Creality Falcon 10w. It is also a built in spacer, the spacer is at Level 1 of the Creality Spacer i.e. Basswood cutting thickness of 7-8mm. How to use: Place the laser…
This custom exhaust hose adapter is designed specifically for the Falcon A1 10W laser engraver. It allows you to connect the original exhaust outlet (with an inner diameter of 55 mm) to a standard 100 mm (10 cm) flex hose, enabling better…
3D printable pliers to aid in removal of both the primary and secondary lens from the body of the laser.
Solar Panel Holder + Stevenson Screen from those things i build myself a… Solar Powered, Weather Station! featuring LoRa technology this is a standalone weather station i build. the main point i wanted to achieve is to broadcast the data…
With a direct drive upgrade to the Ender 3 Pro, the mounting bracket included with the Falcon 10W laser does not fit. The model screws into the gantry next to the fan shroud. The back side is extruded to ensure a tight fit and to hit the…
This is a simple addition of a mounting surface that matches the Laser Tree 10W laser module's mounting plate/shoe that comes in their kit on Amazon. Replaces the original lower Makita mounting band on the Lowrider v3. Printed the same as…
2 models, one with big hole round battery, and one with slightly smaller hole.
Endstopholder for upgraded Sculpfun S9 with monorail on x-axis + Laserhead S30 Pro, 10W. There are 2 Holders, one is For the X-Axis one for the Y-Axis. You need additional: Tool for M3-Threadcutting; or use an M3-Screw and cordless…
This printed part fits two 210W AC power adapters, used on switches like the USW Pro XG 8 PoE and USW Flex 2.5g PoE. I did not want the power bricks just sitting loose on the bottom of the rack, so I designed this mount that holds them…
Top Cover for Snapmaker 10W Laser for Air Assist. Two holes, one for Bluetooth Antenna and one for the air assist hose. Air Assist from Raagnarix:
I designed these pieces to help try and align my laser to a true 0,0 starting point in the bottom left corner.
This is the first thing I have designed so it may be overly engineered but it works for me. I purchased the Creality 10W Laser module and as I have converted my printed to direct drive (using the Creality conversion kit) I could not use…
A remix of the Makita DC10WA Charger Holder on thingiverse https://www.thingiverse.com/thing:5792482/files to use the Skadis/ SKÅDIS universal peg https://www.printables.com/model/635620-skadis-skadis-universal-peg
I printed using White SUNLU PLA+. For enhanced strength I selected 0.08 height and 3 walls, but of course you can print it @ 0.2, however I recommend keeping 3 walls.
Introducing the Pi Cam v3 Mount for the Ender 3 V2, now featuring dual 10W LEDs for enhanced visibility. Designed to integrate seamlessly with your Ender 3 V2, this mount accommodates a Raspberry Pi Camera v3 for real-time print…
I designed this adaptor to fit a 10w laser module from China onto an Atomstack Z Screw Slider. Screw spacing is 16mm x 40mm for the laser part and 24mm x 38.5 for the part that attaches to the Atomstack Z Height Adjuster. I used M3 screws…
This is my 10w led flashlight. It´s one of my favorite projects and very practical. Note: I also designed a more powerful 100 Watt flashlight, wich you can see in my profile. What you need to print: 2x 18650 holder.stl case.stl OR case…
nozzle accept 8mm hose holes are for magnets 6mm in diameter - press fit and 3mm deep
Overview: A 48V AC to DC power supply supplies the DPS5005 module with power. The module outputs via the two binding posts below it. An additional 5V power supply outputs 5V via two USB A connectors (this PSU is housed inside a small 3D…
Will keep the honeycomb bed it a fixed location to laser, for the 19.7" Creality honeycomb bed without the included rubber feet. Aluminum sheet and honeycomb fit inside.
Concepto de Diseño Este diseño presenta la integración de tecnología CNC con módulos láser para una mayor precisión en aplicaciones de grabado o corte. Con partes que tenia en casa me diseñe esta impresora CNC Laser basada en Ender 3 con…
This is a Remix of this . it can now be printed face down which I needed, i also added a keystone. The mount connector is adapted mount from @Mauker Parts 3x M5 screws 3x M5 hex nuts Thx rafaell68 @Mauker
Air Assist for a Comgow Z1 10W Laser. Fits on the original Housing. You need: 1x V6 Nozzle drilled to 1.5mm 1x KJH04-M6 2x M3 Screw 8-10mm Edding to darken the V6 nozzle. Works very fine.
A focus spacer holder/attachment for Creality Falcon 10
The Sovol SO-2 10 watt laser has a design which makes installing a proper air assist difficult without drilling through or replacing the “don't blind me” shield. This design clamps around the top of the shield so and points a nozzle…
Original fan shroud is made of anodised metal, however, to design accessories it was good to re-create the original fan shroud first.
This is a new plate for the 10W laser module of my Sculpfun S10. I got some breakages of the cable, inside the connector of the laser module, which goes to the laser module due to the laser movements. Therefore I designed a new plate for…
This is intended to be used with the honeycomb storage wall The model has an opening for saving filament and inserting the DC10WB battery. Included is a screenshot of the print orientation I used with organic supports. These are the print…
I upgraded my Ortur LM2 Pro S2 with the new 10W LU2-10A laser module and needed something for cable management and a mount for the new circuit board that comes with the laser module. As additional information - our Ortur Laser is mounted…
A simple rack mount for ubiquity psu using 2he
Fan covers specifically designed to fit the xTool D1 5W/10W laser head and to work with the Trini-D Z-axis Extension.
The Anker PowerCore Essential 20K battery bank isn't really powerful enough to charger the deck while you play, but it's the battery bank I have, so I wanted to make a clip to hold it. You can buy the same model here:…
My wife asked for a case for her iPad charger and I made this Buy me a beer PayPal.Me/cagataykilinc
Was tired of just laying my unused modules around. These expensive devices deserve better treatment!! Introducing a dual module holder that fits both a 10w and 20w! WARNING - NOT compatible if you use the orange laser shield! - ONLY…
There are many small air pumps on the market able to deliver up to 30l/min airflow. You just need a pieces like this one to connect them to your laser module head. easy (dis)assembly, no need to drill or cut into any parts jets made out…
This is an update to the original model. The first model had issues with flexing and bending. It also didn't clear the top and bottom flange of the Z-Axis. This model has added support to prevent flexing and has been trimmed to avoid…
Rackmount for Ubiquiti UniFi Switch Ultra 210W (USW-Ultra-210W). 3 screws between : M3 x 20, M3 Threaded Inserts. Items: 3x M3 x 0.5 mm Thread Size, 6.4 mm Installed Length 3x M3x0.5mm 20mm Socket Head Screw Cat5, Cat6, or Cat6A keystone…
I recently got the SainSmart Genmitsu Jinsoku LC-40 10W FAC laser and couldn't find any air assist nozzles that fit it perfectly. Some of the xTool 10W air assist nozzles would fit around the lens, but not with the other tolerances that…
Original magnets from stock NOSE fits. Mine stock nose broke. Second version is for 10x5x3 magnet. No airassist just stock fan cooling thrue nose and laser body. Good for engraving for cutting use my AIRASSIST version.…
The Creality 10W (or smaller) laser includes an adapter (shown in the pictures) useful for attaching it to your Creality printer. However, this adapter isn’t compatible or practical with all printer models. When I converted my Elegoo…
Print Settings Printer brand: Creality Printer: Ender-3 V3se Rafts: No Supports: No Infill: 30 Filament brand: syntech Filament color: white,yellow,black Filament material: Petg Notes: Video review…
Passend zu den erstellten Wandhalterungen eine Erweiterung für das Ladegerät DC10WA von Markita. Die Originalen Schrauben wurden Entfernt und durch Blechschrauben 4,5x40mm an den zwei Elementen befestigt. Hierzu ist auch ein Loch…
A Laser Level Holder for a Creality Falcon 10W. This design is based off of remixing https://www.printables.com/model/977794-creality-falcon-2-laser-crosshairpointer-holder with a crossbar that fits a 33mm diameter laser (such as the…
I used PETG and 0.24mm layer height
Replacement of original
Uchwyt ścienny na halogen LED o mocy 10W XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Wall bracket for 10W LED halogen - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku Zapraszam: https://www.magazynowanie-energii.com -…
I made a new Remix of this model. if you already have the Unifi USW ULTRA mount from Mauker this will fit his mount. It can now be printed face down with no support. added Keystone slot left side ore right + A model with more polygon to…
I wanted to rackmount the Ubiquiti 210W Power Adapter ( UACC-Adapter-AC-210W ) on my mini rack, since it wouldn't tuck away anywhere inside. This holds it practically flush with the back side, and uses the wall mounting plate that comes…
DC10WA Skadis Use the universal Pegs from @KimJanosch https://www.printables.com/model/635620-skadis-skadis-universal-peg
easy to scale (original inner diameter is 100 mm) needs some support ( just beneath the USB-notch ) tested with: Anker PowerWave Wireless Charger Pad 10W and iPhone Xr Print Settings Printer Brand: Prusa Printer: I3 MK3S **Supports:** Yes…
This is a small adapter than can be used with Sansi 10w clip-on grow lights to be able for Spiral Lamp Shade (Vase mode), which can be found here:
I am using HicWic's universal mount for the MPCNC. Note that this mount still works, even on the Primo - at least on the 23.5 conduit version. I recently bought an Ortur Aufero 10W laser and needed a mount for it. The laser comes with a…
This drag chain adaptor has holes for 2 and 3-hole drag chains and also a flat top if you have a different style or want to use it as a remix. This fits directly where the original fan cover is with no modifications.
Changes mount so it will work on the same mounts as Falcon 2 lasers
We know that the better the alignement between the charging pads, the better and faster the charging, with this in mind, and tired of missing charges because of misalignement of the phone over the pad, I decided to create a pad that…
Reolink_RLC-510WA Wandhalter erlaubt die Montage an schmalen Balken. gedruckt mit ASA.
I wanted to have a solar Meshtastic node with 4 Lithium batteries and a 10W solar panel - so this one was the result. It takes some time to print, doesn't look beautiful and uses a lot filament but can withstand strong Northern German…
Stand can be used to angle panel to sun as it rotates while also allows devices being charged to sit on a shelf in shade
Very basic model of a "10W 900LM White/Warm White High Bright LED Light Lamp Chip DC 9-12V" the White version http://www.banggood.com/10W-Warm-Pure-White-High-Brightest-Save-Power-LED-Light-Lamp-p-88169.html Tinkercad:…
Replacement Longer ray5 10watt laser head cover!!!!
I needed space on my desk. So I made a holder for my Brother QL810W label printer. First, I made one with screw holes for metric M3.5 - M4.5 screws. From that, I then made the holder for the Ikea Skadis multi-wall system, and added the…
With the original mount of the Comgrow 10W diode laser, if you had a tall workpiece you had to completely unscrew the thumbscrews and move them to the threaded holes on the other side of the mounting plate. I also didn't like having to…
10W LED lamp uses the Cree XM-L LED. Parts : aluminium reflector 40mm, (plexi-)glass circle 40mm, Cree XML 10W chip on star heatsink, 2 more star heatsinks, 4x4mm 6mm high tactile switch, "Strong light torch driver board" on Aliexpress,…
I like building led lamps, and so i decided to modify a 10w led floodlight to make it like a work light with a stand and all . there are 2 versions of the housing , one with premade holes and one with no hole , in case your lamp has…
This is the first thing I have designed so it may be overly engineered but it works for me. I purchased the Creality 10W Laser module and as I have converted my printed to direct drive (using the Creality conversion kit) I could not use…
Tried to create as accurate of a model as possible for building any mounts/designs around the laser toolhead. I checked the screws on the back and I think they're mostly in the right positions, if anyone has a DXF of the actual mounting…
DIY heatbed for Jr. ***Yes you can buy silicone heaters and stick them to the bottom of the glass but usually that requires some drilling/cutting into the metal base of the bed to get wires routed through. With this solution you'll only…
A two color gridfinity bin for Irwin 10WR Vise Grips. 2 wide, 6 long, 5 high.
A simple yet effective water-resistant holder for a 10W cob LED light which can be mounted with M3 screws to a lid or something. I created this for my aquarium since the original light broke and other lights I tried didn't resist to…
A heavy-duty, functional workstation riser and desk organizer designed to lift a monitor, route cables, and stow everyday gear. Engineered in Autodesk Fusion (Personal/Hobby) and sliced/prepared in Snapmaker Luban. The build features a…
This short video shows the easy assembly: This exotic car-inspired wireless phone charger holder (one of a set of two body choices) is designed for the Belkin Boost Up Wireless Charging Pad 10W, which is compatible with: Qi phones iPhone…
This is my project to adapt the Sony ZX110W headphones to the Oculus Quest 2, this works for the strap that comes from the factory. Este es mi proyecto par adaptar los auriculares de Sony ZX110W a el Oculus Quest 2 este funciona para el…
A bedside stand for quick charging overnight. The angle of the phone is 6 degrees, so it's ideal for a bedside clock. This works with a Samsung S21 with or without a case, so I'd assume that any other similar sized phone would work too.…
holder for Neje 25410 10watt but may fit other lasers
Power supply enclosure for Reolink RLC-510WA, wall mounted internally/camera wire fed through the wall. Camera is supposed to be mounted on the other side of the wall, thus no cabling is accessible. Internal plug holder is secured with a…
Simple and cheap 10w flashlight that fits 3x18650 cells but is also usable with any other lithium cells you might have around. No cells in series so you can just throw in any cells that fit inside. Mine is printed from recycled plastic,…