Search results: 1x1

Sort order

971 models

P
PrintablesLandon Campbell

1x1 Short Vase Mode Gridfinity Bin With Magnets

I found the full-size vase mode bins to be too tall and hard to reach the screws so I designed a shorter one including a place to put labels. These work great for things like screws and nuts. There are two magnet holes that are optional…

Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant

Downloads
818
Likes
79
Rating
4.67
P
PrintablesMrViddy

Caseoh 1x1 Lego Piece

Face was Painted with Acrylic Paint And clear coated. 118mm x 80mm 5 Pieces Super Glue Required STEP 1: Add Glue, and line up then secure in Place. STEP 2: Add Face, then secure with glue. FINAL PART: add head, then secure with glue 95%…

Print approx. €12.39–€15.15 excl. taxPreliminary estimate for one variant

Downloads
630
Likes
26
Rating
0
P
PrintablesDusBus

Gridfinity - EN-EL15 battery holder - 1x1 - 1x

Holder for one EN-EL15 type rechargeable battery. It is designed so the connectors are facing down. I did this to protect them from dust. This model does not have screw holes, I kept the regular magnet holes though.

Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant

Downloads
44
Likes
5
Rating
0
P
PrintablesNordic

Playmobil Cannon Axis Wheel 41x14 Replacement - 30030600 30063460

Replacement for the Playmobil cannon's wheels/axis. The axis is appr. 41 mm long (incl. hub) with a wheel diameter of appr. 14 mm. Original part numbers are 30030600 and 30063460 - depending on the color. In the original design, there is…

Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant

Downloads
28
Likes
16
Rating
0
P
PrintablesNoWarrenty

Gridfinity Screw Measure Tool, 1x1 Mini Edition

There are two versions: one that goes from 4 to 36mm in 2mm steps and one that does that only to 20mm and from there on in 5mm steps - because most metric screws are available in 5mm steps above 20mm. It has a M5 printed thread where you…

Downloads
2,962
Likes
893
Rating
4.96
P
PrintablesJerrod H

LEGO Flower 1x1 (24866) for Giant LEGO Wreath

A giant-scale version of the LEGO Flower "Plate 1 x 1 with 5 petals” (24866) piece from 2018, intended for use on the popular Giant LEGO Wreath . Interior diameter of the fitment is 30.0 mm; the same as the basic 1x1 stud piece. Redrawn…

Downloads
2,785
Likes
1,225
Rating
5
P
PrintablesMatthew

Gridfinity Deep 1x1 Bin

This bin follows the design of the original Gridfinity basic bin. However the internal space extends down into that space normally reserved for the magnets. I've exported several sizes but if there's something that you would like to tweak…

Downloads
2,696
Likes
432
Rating
5
P
Printablesidenny1

Gridfinity Micro SD card holder 1x1x3 (added step file)

This was inspired by Zack Freedman's Gridfinity project. My take on a Micro SD card holder for Gridfinity. I created using Onshape . Added step file for easy changes.

Downloads
2,243
Likes
206
Rating
4.76
P
PrintablesFanBlox Company

REWORK Articulated 1x1x1x1 Roblox Figure (Classic and Forsaken)

1x1x1x1. with extra parts to make Forsaken 1x1x1x1. Print in PETG with tree supports for best results (In my opinion). UPD 1/13/26: Remade face to be more accurate. Added old face to Extra parts. Added full Forsaken version parts. UPD…

Downloads
1,444
Likes
70
Rating
4.75
P
Printablesame

Gridfinity 1x1 lid

OpenSCAD model to build a 1x1 lid for gridfinity storage. From the model you can see the dimensions of the gridfinity base, and that the model is trimmed all around by 0.25mm within the 42mm grid.

Downloads
1,144
Likes
148
Rating
4.9
P
PrintablesMichael Jones

1x1 Gridfinity 9 SD + 4 MicroSD Card Holder

1x1 Gridfinity 9 SD + 4 MicroSD Card Holder for storing memory cards. I couldn't find one that was quite the size and shape I wanted, so just made my own. Found this useful stacked on top of another simple 1x1 bin in my drawer.

Downloads
1,048
Likes
258
Rating
4.4
P
PrintablesDavid Gadling

Gridfinity Glue Stick Holder - 1x1x1

This will hold anything with a diameter ≤ 27 mm and height ≥ 36 mm in a 1x1 gridfinity square. For example, an Elmer's washable school glue stick fits really nicely! This was inspired by the other model but: taller to handle the stick…

Downloads
1,010
Likes
80
Rating
4.93
P
PrintablesJorge

MMSS 1x1 Module - Nozzle Wiper

This module, for 4 Nozzle Wipers , works with in conjunction first introduced with the Multi-Modular Storage System -MMSS. It works on the current printers: P1P, P1S and X1C. Pre-made modules, here there are several, and many are…

Downloads
957
Likes
56
Rating
4.81
P
PrintablesBenBreaksThings

Gridfinity 1x1x3 SD Card Caddy (no magnets)

Gridfinity compliant 1x1x3 block with 7.9 mm gap between each card for ease of access. No holes for magnets, my printer isn't dialed in enough to do those holes, so my entire Gridfinity collection is without.

Downloads
929
Likes
133
Rating
4.92
P
Printablesidenny1

Gridfinity AAA Battery 1x1x3 or 2x1x3 (added step files)

Gridfinity AAA Battery 1x1x3 or 2x1x3 created using Onshape adjusted battery diamenter. Added step files for easy changes.

Downloads
917
Likes
54
Rating
5
P
Printablesandrepadua

Gridfinity 5U Tall Bins - 1x1 to 5x5

I tried to generate all combinations i could fit on my Bambu. Magnets have a tolerance of 6.20, which works perfectly when printing the bins with a 0.6mm nozzle. Scoop A Scoop is the rounded ramp inside the bins. The position of the scoop…

Downloads
885
Likes
314
Rating
5
P
Printablesidenny1

Gridfinity USB A & C holder 1x1x3 or 2x1x3 (added step files)

This was inspired by Zack Freedman's Gridfinity project. My take on a USB-A & USB-C holder for Gridfinity. I created using Onshape . Added step files for easy changes.

Downloads
753
Likes
109
Rating
4.86
P
PrintablesFudge

Lego Brick 1x1

Lego Brick 1x1

Downloads
741
Likes
25
Rating
5
P
PrintablesTailS MeDiA

V3.1 Gridfinity Big/Small Parts Project Tray W/ 1x1 Screw Bin, 63 Slot Grid Magnet Tray & Stackable Lid

UPDATE Version 3.1: updated the fillet on the inside of the small squares to make grabbing screws easier. Version 3.0: I have included 2 models that use a 63 slot grid for ultra small magnets. One of the 2x2 trays has the grid embedded if…

Downloads
691
Likes
124
Rating
5
P
PrintablesMushbrandon

Gridfinity 1x1 Sidecutter and Tweezer Holder

This is a 1x1 Gridfinity container used to store a single pair of side cutters and a single pair of tweezers. The side cutters shown in the picture and used to model the slot within this container can be found here . This model was…

Downloads
680
Likes
77
Rating
4.8
P
PrintablesTomie M

BIC Lighter Holder Gridfinity 1x1

Gridfinity 1x1 5U height. The v2 version has a slightly improved tighter tolerances and an updated design (chamfers to easily slide in)

Downloads
639
Likes
61
Rating
4
P
Printablesbulbasaur0

Gridfinity 1x1x3 combo bin and micro SD card holder

This is a remix of idenny1's Gridfinity 1x1x3 micro SD card holder. I've removed half of the microSD card slots to make this a combination bin and micro SD card holder.

Downloads
638
Likes
84
Rating
4.7
P
PrintablesJW Designs

GRIDFINITY - 1x1 - 16 Hex-Bit Organizer

I designed this hex bit holder as none were quite how I wanted them. This organizer holds a total 16 Hex-Bits. I also designed a 1x2 Gridfinity 32 Hex-bit Holder that can be found here! Has holes for magnets and can be stacked on top of…

Downloads
635
Likes
83
Rating
5
P
PrintablesAndreas Mass

Gridfinity 1x1/1x2 bin 2x divider Add-on for cases

2025.08.26: Added 1x2 bin divider versions for when you need to store longer objects. 2024.12.13: Added a STEP folder in the file section containing models of each version in case you need to modify one of these for your custom bins.…

Downloads
600
Likes
199
Rating
4.88
P
PrintablesTim

lego technic 1x15 liftarm 6321716

obscure technic 1x15 with perpendicular holes. was missing from my AT AT and I didnt want to wait on shipping Print Settings Printer Brand: Anycubic Printer: Kobra **Rafts:** No Supports: No **Resolution:** .1 Infill: 100% **Filament:**…

Downloads
593
Likes
54
Rating
5
P
PrintablesAeolus

Dremel | Gridfinity | 1x1 Organizers

A set of organizers for Dremel paraphernalia. I use them to organize my dremel's bits and bobs on the tiered gridfinity base plate .

Downloads
591
Likes
138
Rating
5
P
PrintablesJorge

MMSS 1x1 Module - MicroSD

This module, for 4 microSD's , works with in conjunction first introduced with the Multi-Modular Storage System -MMSS. It works on the current printers: P1P, P1S and X1C. You can see in the context, with the specially designed MMSS case ……

Downloads
583
Likes
50
Rating
5
P
PrintablesTailS MeDiA

Gridfinity Big/Small Parts Tray W/ Removable 1x1 Screw Bin & Stackable Lid

UPDATE: I have created screw bin holders in 2x2 grid sizes for plates and other bigger parts as per my field research data. I’ve also created 1x1 lids for the screw bins! The big parts tray has 3 xrta small slots, 2 small slots, one…

Downloads
574
Likes
83
Rating
5
P
PrintablesPDub

Gridfinity 1x1 Apple Watch Charger

This is a remix of the Apple Watch Charger Stand from Mate0126 and the Gridfinity Block template from Filip Kolinsky. This is part of my EDC / Dresser Valet series that I'm creating. If you're not familiar with the Gridfinity system from…

Downloads
552
Likes
52
Rating
4.57
P
Printablesscheff

Gridfinity 1x1 Battery Storage CR2032 & CR2430

Simple 1x1 size Gridfinity container to store 8x CR2032 and 3x CR2430 Batteries Printed with: 0.6mm Nozzle 0.30mm Layer height 15% Infill

Downloads
539
Likes
53
Rating
4.5
P
PrintablesStewart Copland

1x1 Gridfinity SD and USB holder

Based off of Marius' design but with a 1x1 footprint. Marius' design was remixed from a desk organizer from DRDflow. Each slot holds either : 3 micro SD 1 regular SD 1 USB A 2 USB C (may collide with walls if the device is too large) This…

Downloads
526
Likes
47
Rating
4.64
P
PrintablesKagarov

Concrete modular fence of the USSR PO-2 m:1x100

The most common modular concrete fence in the USSR and Russia, which became a visual symbol and brought fame to its author - Boris Lakhman. File in scale 1:100. Print instructions Supports: No Resolution: 0.2 Infill: 30 Notes: For greater…

Downloads
515
Likes
93
Rating
5
P
PrintablesFudge

Lego Plate 1x1

Lego Plate 1x1

Downloads
511
Likes
19
Rating
1
P
Printablescmsj

Gridfinity 1x1 AirPods Pro box

Gridfinity is life, gridfinity is power. I'm converting my office “quick grab stuff” cupboard to gridfinity, which means I needed a holder for my AirPods Pro case. Other airpods gridfinity options exist, but they typically mount the case…

Downloads
503
Likes
49
Rating
4.83
P
PrintablesGigaBagel

[OUTDATED] Forsaken timeless 1x1x1x1 articulated figure

This is the “timeless” 1x1x1x1 skin from the asymmetrical horror game forsaken. Print this model in PETG for longest lasting joints, but you can print in PLA if you are okay if they loosen over time. You can paint this model if you want…

Downloads
495
Likes
27
Rating
5
P
PrintablesTreba Ales

CaseOh like a 1x1 Lego piece

CaseOh figure, but like a 1x1 Lego piece

Downloads
470
Likes
22
Rating
0
P
PrintablesRaphi

Lego 54200 (1x1 Slope)

The Lego piece 54200

Downloads
461
Likes
9
Rating
0
P
PrintablesEdGJr

LEGO 1x1 Plate Vertical Clip 2555

LEGO 1x1 Plate Vertical Clip, part # 2555

Downloads
447
Likes
11
Rating
5
P
Printableshardiebotha

Gridfinity supportless 1x1 bins, stackable basic or with label or ramp.

Gridfinity is a storage and organizer system introduced by YouTuber Zack Freedman in this video. In this video, he outlines the specifications, with a good bit of documentation of the Gridfinity standard published on http://Printables.com…

Downloads
443
Likes
27
Rating
5
P
PrintablesBaGooN

Gridfinity 1x1 Bins – Snap Lid

This is a bin compatible with ZackFreedman’s Gridfinity . Designs are available for both vase mode printing and solid printing. Notes: The minimum vase mode printing settings use a 0.4 mm nozzle with an outer wall width of 0.6 mm. In my…

Downloads
433
Likes
184
Rating
4.5
P
PrintablesKevin Barker

Gridfinity Base Risers/Spacers (1x1)

Risers to raise Gridfinity bins up above the baseplate. Useful if you have a bunch of random height bins, but you want them to sit flush on top. Uses standard 6x2mm magnets (press fit). All risers are 1x1, with heights from 1U up to 8U.…

Downloads
410
Likes
75
Rating
5
P
Printablesgiobber

Gridfinity CR2450 Battery Holder 1x1x2 (with various tolerances)

I have bought a couple of sonoff zigbee sensor (SONOFF SNZB-02) after some aqara sensor start failing, but differently from the latest they use the CR2450 batteries instead of the more common CR2032 I search printables and thangs for a…

Downloads
407
Likes
34
Rating
5
P
Printablestheflow.fr

Gridfinity simple bin 1x1x6

here's a simmple gridfinity bin

Downloads
401
Likes
23
Rating
5
P
Printableshardiebotha

Gridfinity supportless 1x1 bins with label and ramp.

I modeled some Gridfinity bins which will allow magnets to be press-fitted. I added an internal ramp like I've had in some bins I've downloaded in the past which is very helpful in getting small parts out of the bottom of the bin. Keeping…

Downloads
401
Likes
30
Rating
5
P
PrintablesVLAD MARIUS

LEGO Round Flat Tile 1X1

This is a LEGO Round Flat Tile 1X1 (3 tiles = brick). The tile is similar to the tile 4646844, but it does not need to be white.

Downloads
399
Likes
15
Rating
0
P
PrintablesWilko

Cookie Cutter Heart (1x1)

We all love additive manufacturing (aka 3d printing) because it creates so little waste. But what should I say. At least there is one subtractive process where the waste can be processed further. Cookie dough + cookie cutters ;-) The…

Downloads
392
Likes
70
Rating
5
P
PrintablesThe Next Layer

Gridfinity 22mm Deburring Tool 1x1

A remix of atucom's deburring tool to fit the cheap AliExpress deburring tool, which is 22mm. I had to sacrifice 2 blades to make it fit. Also, I made the holes bigger, because they didn't work properly when printing with a 0.8mm nozzle…

Downloads
389
Likes
66
Rating
4.89
P
Printablesbenrr101

Ikea Galant Drawer Organizer 1x1

This is a simple, modular drawer organizer for the Ikea Galant file drawer units. This thing is the 1x1 organizer that is 1/4th the width of the drawer. Print 4 of these to fill one row across the drawer - or mix and match with the 1x2…

Downloads
380
Likes
49
Rating
0
P
PrintablesDaniel Vitanza

1x1 Gridfinity Dremel Accesories Holder

1. Introduction Dremel accesories holder for gridfinity......optimised to get a lot of accesories by 1x1 grid and with ease of use. 2. Revision History Version Description Date A.1 Initial Release 25/06/2024 A.2 Add more variants. Change…

Downloads
372
Likes
63
Rating
5
P
Printablesidenny1

Gridfinity Phone Charger holder 1x1x3 or 2x1x3 (added steps file)

This was inspired by Zack Freedman's Gridfinity project. My take on a phone chargers holder for Gridfinity. I created using Onshape. Added step files for easy changes.

Downloads
356
Likes
57
Rating
3.67
P
PrintablesDeepSeaLoon

Keyboard Fidget Switch Tester Keychain 1x1

Made a 1x1 variant instead of the 2x1

Downloads
355
Likes
38
Rating
4
P
Printablesodingalt

Desk Top Shelf Brackets for 1x10 or Larger Boards

Brackets for building a DIY shelf out of a 1x10 or similar shelf board. Designed for X1C print bed (256mm * 256mm). *please note the slicer modifiers to make the bracket/screw part much strong I wanted a shelf that could specifically hold…

Downloads
354
Likes
101
Rating
5
P
Printables3DSpenny

Gluestick Holder 30mm - Gridfinity 1x1x6

A 1x1x6 Gridfinity bin designed to hold your gluesticks or other items with a 30mm diameter. For reference, this will fit a 40g Elmer's Purple Gluestick. Hole diameter: 30.8mm Hole depth: 35mm I'd recommend using a magnet base for better…

Downloads
352
Likes
43
Rating
4.71
P
PrintablesMrNerdHair

Parametric Gridfinity AirPods Pro 1x1 box

I loved the idea behind cmsj's 45-degree AirPods Pro holder, but I wanted to print a model that was a bit more precise. I pulled dimensions from Xials' extremely precise CAD model of the device to make a custom-fit version using…

Downloads
340
Likes
27
Rating
4.78
P
PrintablesFlyBy Tom

Sortimo 1x1 bins - Accurate to original

Need some extra 1x1 bins for the Sortimo system but the models I found online were not exactly the same as the originals and most importantly did not have the registration "feet" that keep the bins from moving on the box's internal grid.…

Downloads
340
Likes
36
Rating
4.75
P
PrintablesVLAD MARIUS

LEGO Flat Tile 1X1

This is a LEGO Flat Tile 1X1 (3 tiles = brick). The tile is similar to the tile 307001, but it does not need to be white.

Downloads
340
Likes
8
Rating
5
P
PrintablesMadeByAdam

SD / MicroSD Card holder Gridfinity tray (1x1x3)

SD / MicroSD Card holder Gridfinity tray This holds 10 SD and 10 MicroSD cards in a 1x1x3 Gridfinity tray.

Downloads
334
Likes
41
Rating
5
P
Printablesfreylint

Gridfinity File / Paintbrush Holder 1x1x1

Print in place 1x1x1 gridfinity module designed to hold the rubber handles of the Army Painter miniature files neatly. Should work for most needle style files. To test before printing, make sure your objects fit snugly in a 6x33mm hole.…

Downloads
328
Likes
43
Rating
5
P
Printablesidenny1

Gridfinity Needle File holder 1x1x6 (added step files)

I adjusted the size of the holes to 4.7 mm to fit my handles. Added step files for easy changes.

Downloads
325
Likes
49
Rating
4.56
P
PrintablesLiam

1x1 Lego plate

this is a Lego 1x1 flat that I designed in onshape

Downloads
322
Likes
9
Rating
4.33
P
Printablesi8anov
Downloads
312
Likes
12
Rating
5
P
Printablesnickd

Gridfinity Funnel 1x1x6

Remixed to sit upside-down in a single gridfinity 1x1 square.

Downloads
311
Likes
53
Rating
4.94
P
PrintablesDavid McIntosh

Gridfinity 1x1 Qtip holder Fancy Bin

Simple 1x1 Gridfinity Bin you could use for Q-tips or anything else….

Downloads
310
Likes
28
Rating
5
P
PrintablesZemistr

IQOS TEREA/HEETS 1x10 clip case 2019

Keeps your IQOS TEREA/HEETS bullets covered and safe. Perimeters: 5

Downloads
300
Likes
23
Rating
4.5
P
PrintablesShellgame

Lid for 1x1 Gridfinity bin with label

Tight fitting click-in lid for 1x1 Gridfinity bin with label tab* and stacking lip. It keeps you screws or glitter in the bins and random garbage out of them even during moderate accidents. * Designed specifically for the default label…

Downloads
298
Likes
48
Rating
4
P
PrintablesDJ

Festool MFT DIY Corner Stops (20mm) 121x121mm, 217x121mm und 130x130mm (einstellbar)

Festool MFT DIY Corner Stops (20mm) Verschiedene Varianten: Corner Stop 121mm x 121mm Corner Stop 217mm x 121mm Corner Stop 130mm x 130mm (einstellbar) mit verschiebbaren “Dogs” Straight Stop 121mm Straight Stop 217mm

Downloads
291
Likes
79
Rating
5
P
Printablestom davey

Gridfinity 1x1 bin

42mm Grid Base

Downloads
291
Likes
20
Rating
4.67
P
Printablesonerian

Lego 25269 ( tile 1X1 Quarter Circle)

Lego 25269 ( tile 1X1 Quarter Circle)

Downloads
284
Likes
5
Rating
5
P
PrintablesArthur Felk

1x1 Schrauben Boxen für Werkbank Küpper Werkbank Schrauben Ordnungssystem Aufbewahrung Sortierung

Modulares Ordungssystem für schrauben und Kleinteile in Werkbänken und Werkstätten. Mit laschen zum herausnehmen und beschriften. Material: PLA+ Läyerhöhe 0,2-0,4 mm Wanstärke 1,5 mm (sehr Stabil) Modular organization system for screws…

Downloads
276
Likes
38
Rating
0
P
PrintablesExpance

Gridfinity Screw Measure Tool, 1x1 Stackable

I wanted to put this handy little tool anywhere in my storage case so I added the upper edge to make it stackable.

Downloads
276
Likes
56
Rating
5
P
Printablesw3r

Gridfinity 1x1 Allen Key Holder

Gridfinity 1x2 Allen Key Holder I quickly modelled up to hold the allen keys that came with my Sovol SV06 Holds: 1.5mm, 2mm, 2.5mm, 3mm, 4mm I printed this in PLA with 0.2mm layer height, 3 walls, 10% infill and 4 top and bottom layers.…

Downloads
275
Likes
26
Rating
4.6
P
Printablesraw n

STACKABLE Gridfinity LR44 Battery Holder, 10 pc. 1x1x3

I don't know why but the original model is not stackable with the batteries in it. (The red arrow mark in the photos.) So I enlarged its height to 3U and it's stacking nice. Also added a label area because I like the label.

Downloads
274
Likes
34
Rating
5
P
PrintablesChris Trotman

Gridfinity 1x1 Desiccant Bin and Lid

I store my Camera Lenses in Gridfinity bins, and wanted to store some reusable desiccant alongside them in order to keep the humidity down, and reduce any chance of mould growing on my expensive lenses. The holes in the bin and lid are…

Downloads
267
Likes
62
Rating
5
P
PrintablesDusBus

Gridfinity - A23S battery holder - 1x1 - 9x

This Gridfinity container holds 9x A23S batteries. It does not have screw holes but I kept the regular magnet holes.

Downloads
267
Likes
20
Rating
4.8
P
PrintablesBodo

1x1 units, full height, 1x1 grid Stackable Insertbox Auer

Stackable Insertbox 1x1 units in footprint, full height compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link below this variant is available commercially as injection molded…

Downloads
262
Likes
12
Rating
5
P
PrintablesB0rax

Lego Light Saber clip - or Tile 1x1 with clip

I really liked the lego inspired light saber from cmdesign, he displayed this C-Clamp tile in one of his pictures but has not shared the model. I wanted to change that and made this model available. I added wall mounts in case it needs to…

Downloads
262
Likes
40
Rating
4.75
P
Printableshenpenben

1x1 Divided Gridfinity Bin with Detachable Label

I added a divider to the 1x1 bin size, and modified Lidfinity to fit with the divider.

Downloads
247
Likes
36
Rating
4
P
PrintablesFlyBy Tom

Sortimo 1x1 Bin Dividers and Label

I need a divider for the Sortimo 1x1 bins as I had a lot of small items that needed less space then the orginal bins provided. Turns out that a vertical divider wouldn't work due to the design of the lid so I came up with these removable…

Downloads
247
Likes
55
Rating
5
P
PrintablesDaGeek247

11x14 Picture Frame

11" x 14" x ¼" picture frame. Comes in parts which are designed to be super glued together. Does not require supports. Supports landscape and portrait without adjustment. If it scales wrong in your slicer, change the scale to 2540%.…

Downloads
247
Likes
42
Rating
0
P
Printabless2sP

1x1x5 Bin | Lable | Gridfinity | Deskorganizer | Tool | select2stertPrint

I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…

Downloads
246
Likes
16
Rating
4.5
P
Printablesfranmundo sg

Lego compatible plate 1x1 (3024)

This piece is compatible with Lego.

Downloads
241
Likes
4
Rating
0
P
Printableskristoff

Gridfinity 1x1 CR2025 Battery Holder

This is for Zach Freedman's Gridfinity System. It's a 1x1 CR2025 Battery Holder. Holds 9 batteries. With magnet holes. This is a remix of the Gridfinity battery holders by HusHageHobby.no who has holders for CR2032, C, D and other types…

Downloads
238
Likes
18
Rating
5
P
PrintablesNicholas Cooper

1x1x1x1 (Forsaken)

1x1x1x1x1x1x1x1x1x1x1x1x1x1x1x1x1x1x1x1x1x1 (cool I guess)

Downloads
237
Likes
6
Rating
0
P
PrintablesJD

IKEA furniture MOPPE 21x17x12 cm

I would appreciate a lot if you could support me giving a like and downloading, thank you guys.

Downloads
234
Likes
48
Rating
0
P
PrintablesJim

Gridfinity 1x1x16U Tall Open Bin

1x1x16U Open Bin, works great as a Pencil Cup, or for longer tools/probes.

Downloads
227
Likes
23
Rating
5
P
PrintablesJakob

Gridfinity Mitutoyo caliper holder 2x2 + 1x1

Can be printed on smaller printers. Step file included. V2: Added different heights.

Downloads
224
Likes
35
Rating
5
P
Printablessmoura

LEGO - Compatible Plate 1x10

Plate 1 x 10 This set of building pieces has been developed through reverse engineering and is compatible with LEGO® building systems. Please note that this project is entirely independent and is not endorsed, sponsored, or affiliated…

Downloads
224
Likes
11
Rating
0
P
Printablesdrgius

gridfinity 1x1 hex bit organizer

hello everyone, I am new to 3d printing when I was browsing through the files I discovered gridfinity organizing system and decided to organize my toolbox. I have looked at models uploaded here for inspiration but decided to make my own…

Downloads
218
Likes
28
Rating
5
P
Printablesidenny1

Gridfinity AA Battery 1x1x3 or 2x1x3

Gridfinity AA Battery 1x1x3 or 2x1x3 created using Onshape adjusted battery diamenter.

Downloads
218
Likes
20
Rating
5
P
PrintablesFlyBy Tom

Sortimo 1x1 Bin - Label Collar

A quick and easy way to add a label to Sortimo 1x1 bins. Just pressure fits into the bin and is easily removed if you want to change it around. Made this to compliment the 1x1 Insert Dividers I also made for the 1x1 bins. 1x1 Label Collar…

Downloads
213
Likes
58
Rating
4.5
P
Printables_KaszpiR_

Gridfinity 1x1 Lego 4x4

Notes: Two sets one next to another can not be bridged with single LEGO brick. This is because LEGO is 8mm between centers of the connectors, while Gridfinity is in general multiples of 7mm. So I guess 4x1 gridfinity could work (not…

Downloads
213
Likes
45
Rating
4.75
P
PrintablesDarkBrave

Better 9V Battery Gridfinity Holder (1x1x3)

Small Gridfinity 1x1x3 module that holds 2 9V batteries. Based off Jerr_074's design, but I modified it to have the lip at the top and to be a 1x1x3, rather than whatever weird size their's was. They can stack while empty, but not when…

Downloads
212
Likes
19
Rating
4.86
P
Printablessmoura

LEGO - Compatible Plate 1x12

Plate 1 x 12 This set of building pieces has been developed through reverse engineering and is compatible with LEGO® building systems. Please note that this project is entirely independent and is not endorsed, sponsored, or affiliated…

Downloads
212
Likes
12
Rating
1
P
PrintablesSimon Lundell

gridfinity 1x1 bin vase mode repeated print

LittleHobbyShop's 1x1 vase mode gridfinity bin is a nice little bin. This model is a modification that allows you to print with 1.0 mm wall thickness. This makes the bin a bit sturdier but still tiles nicely. Attached is a hand crafted…

Downloads
211
Likes
51
Rating
5
P
PrintablesMei

Blokus 1x1 replacement piece

Simple thing, replacement for the 1x1 tiles in the game Blokus. I'll make more as i'll loose them. ;) Category: Toy & Game Accessories

Downloads
201
Likes
1
Rating
5
P
PrintablesOachkatzl

1x1 Gridfinity Epoxy Tray

1x1 Gridfinity bin that holds 10 epoxy trays with a break-away stirrer

Downloads
201
Likes
38
Rating
4.83
P
PrintablesBlox IsCool

1x1x1 CM CUBE

1x1x1 Cm Cube

Downloads
200
Likes
6
Rating
0
P
PrintablesTripod Tech

Gridfinity Bin (1x1) for Diamond File Set w/6mm holes

I reworked the nice design that TrackZero made, but with 6mm holes, instead of 4mm. The handles on my files are about 4.5mm, so this gives them a little more room, and they're super easy to take in and out, but still stay in well.

Downloads
197
Likes
29
Rating
5
P
Printablesjunit1337

Gridfinity Stackable Funnel 1x1x3

This funnel is optimized to be stackable as 1x1x3 container, so it can be stored within Gridfinity more easily and also allows the usage with no need to hold it. The funnel opens to one bottom side to fill divided bins easily and seals…

Downloads
197
Likes
52
Rating
5
P
PrintablesK2_Kevin

Hex Bin Gridfinity 1x1

This Hex Tray offers thicker walls for a more rugged tray. 1x1 Gridfinity base plate.

Downloads
197
Likes
35
Rating
0