Search results: 2007

Sort order

192 models

P
PrintablesFirebrick43

GMT800 Silverado / Tahoe / Suburban / Yukon Door handle repair clip (1999-2007)

This is a repair part for your GMT800 front door arm rest clip. The door switch panel clips into it. The originals are prone to breaking with age and then the switch panel flops around. Print in ABS or PETG for heat resistance. Printed…

Downloads
678
Likes
67
Rating
5
P
PrintablesMikyner

Skoda Fabia 1 (1999 - 2007) phone holder on dashboard

Skoda Fabia 1 (1999 - 2007) phone holder on dashboard Diameter of the ball is 17mm I used the Baseus Car Phone Holder from Aliexpress as the holder itself https://s.click.aliexpress.com/e/_DBAMS11 It is necessary to print the model split…

Downloads
634
Likes
58
Rating
4.33
P
PrintablesModel Magic

The Ghost Rider - Johnny Blaze - 2007 - 2 VERSIONS

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
486
Likes
72
Rating
5
P
PrintablesMike L

VW Passat 2007 breakdown triangle compartment lock

This is a remix of almaro's design. http://www.thingiverse.com/thing:1487876 My friend has a 2007 Passat Variant and this parts were broken. Original parts cost 30€ in germany and there are no cheap copies available. So we gave it a try.…

Downloads
338
Likes
29
Rating
4.5
P
PrintablesCougar694u

2nd Generation Chevrolet Chevy Silverado phone holder 2007-2013

V3 Moved the phone farther out and angled/tilted it up/back at 75 degrees (or leans back 15 degrees). I removed the bracing and printed in PETG and it's been working fine. Added Fusion 360 files (f3d, 3mf, stl). V1 Designed to fit the…

Downloads
314
Likes
44
Rating
0
P
Printablesnikojpapa

Jeep Wrangler JK (2007 - 2018) Glove box organizer

Taking inspiration from CustomNiches's JL design ( https://www.printables.com/model/415930-jeep-wrangler-jl-2018-glove-box-organizer ), I designed a similar shelf for JK Wranglers. Supports are not needed when pieces are laid flat on the…

Downloads
300
Likes
68
Rating
5
P
PrintablesOutlaw

Kawasaki KLR 650 Tool box (1984 to 2007)

I modeled this awhile back to replace the factory tool box on my 1st gen Kawasaki KLR 650. It's best to print it in ABS so that it can withstand sitting in direct sunlight in the middle of the summer. I don't remember the settings I used,…

Downloads
276
Likes
28
Rating
5
P
PrintablesPoseidonDesign

Tundra Shift Knob ( 2nd Generation 2007-2021)

In terms of size, I shaped the ball end based on my hand - usually wear a size large glove, if that helps. I also kept the overall height just tall enough to cover the threads when screwed down - never quite liked how gaudy and huge the…

Downloads
253
Likes
37
Rating
5
P
Printablesccc888

2007-2013 Nissan Battery Terminal Cover

Designed based on the dimensions of the original 2011 Nissan Altima battery terminal cover. Fits Altima, Maxima, Murano and Quest from 2007 to 2013. Printed and tested with PETG with 100% infill. Passed 300+ open and close fatigue test.…

Downloads
240
Likes
33
Rating
0
P
PrintablesTito

2001-2007 Toyota Sequoia Side Mirror Gear

2001-2007 Toyota Sequoia Side Mirror Gear

Downloads
231
Likes
14
Rating
5
P
Printablesdromanol

Peugeot 308 (2007-2013) phone stand

Phone stand for the Peugeot 308 (2007-2013). There are two versions, one in two pieces, with a mat that can be printed on TPU or flexible filament, and the other on one whole piece. The tray is designed so the phone can be on landscape…

Downloads
197
Likes
13
Rating
0
P
PrintablesKJE3DESIGNS

2000-2007 Toyota Sequoia/Tundra ashtray EDC mount

Designed this to fit into the ashtray mount of your Sequoia or Tundra. Product slides right in and is a tight fit so that it does not slide out. It will hold a phone on the bottom and fit an S23 Galaxy. The top will fit my trayvax wallet…

Downloads
193
Likes
14
Rating
0

Seat adjustment handle for Renault Kangoo (1996-2007) Trafic (2001-2010)

I've printed it in ABS as car can get quite hot in the sun, on the picture there is a fuzzy skin option used but printing next time I'd skip that, the effect is not even close to the original facture

Downloads
192
Likes
8
Rating
0
P
Printablesmusicdj

Brake Switch Stopper Plastic- Brake Pedal Pad Brake Pedal Stop Pad Brake Light for mazda 6 2007

Brake Switch Stopper Plastic- Brake Pedal Pad Brake Pedal Stop Pad Brake Light for mazda 6 2007 I suggest using TPU with infill 80%

Downloads
178
Likes
9
Rating
5
P
PrintablesKuro

250ml can holder reduction for Peugeot 308 I (2007-2013)

Hello there, I've created an adapter for the 250ml cans. The adapter is press-fit into the old cupholder. To improve grip, I designed spring-loaded pins to secure the can. Enjoy!

Downloads
178
Likes
15
Rating
4
P
PrintablesReggie Clayton

2007 short track Nascar blank

2007 Nextel cup short track gen 4 Nascar blank car.

Downloads
166
Likes
5
Rating
0
P
PrintablesFirebrick43

GMT800 LT Silverado / Tahoe / Suburban / Yukon Door Switch post repair (1999-2007)

This part helps repair the front post on higher optioned LT models that can break if the rear clip fails. Not all models use this front bolted post from the bottom. Print from ABS/PETG solid for strength. Will need to use supports and put…

Downloads
162
Likes
46
Rating
0
P
PrintablesAcgames

Toyota Corolla 2007

Concepto del diseño El Toyota Corolla 2007 es un modelo icónico y práctico pensado para entusiastas de los coches y coleccionistas en miniatura. Este modelo 3D refleja la atención al detalle y la calidad conocidos de la marca Toyota. Uso…

Downloads
162
Likes
15
Rating
0
P
PrintablesCharles Coonz

Mitsubishi Colt 2007 Fan Control Knobs

These knobs fall apart after a few years due to poor plastic. It is very hard to find so i had to make it from scratch. This needs to be printed with PETG transparent and its good as new. There is a small hole on top of the knob. I have…

Downloads
150
Likes
6
Rating
0
P
PrintablesSterminatore

2007 Hyundai Accent Hood Prop Clip

My 2007 Hyundai Accent was missing the hood prop clip, so the prop just dangled in the engine bay when the hood was down. Press-fits into the existing hole in the hood and holds the prop securely. Print in a heat-resistant material, it…

Downloads
150
Likes
14
Rating
5
P
Printablesewr2san

Sun Visor Holder for 2007 Honda Accord

2 Piece replacement for broken Honda Accord Sun Visor Holder Recommend that you print it in PETg/ASA/ABS or other non-low melt material as PLA will sag in car heat. Print with at least 3 walls, 0.2 layer height, and 15% infill. Print with…

Downloads
150
Likes
23
Rating
5
P
PrintablesModel Magic

Sweeney Todd - 2007 - REPAIRED

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
147
Likes
29
Rating
0
P
PrintablesPhoto Type

BMW e90 (2007) headlight dust cover

Headlight cover for car BMW e90 i made from measureing an original you may need to adjust on long side to be a bit shorter but i printed it as is and it worked fine, printed it on elegoo mars 3 with abs-like resin.

Downloads
145
Likes
23
Rating
0
P
Printablesjmynheir

Seatbelt Cheater 2007-13 Chevrolet GMC Truck

It's a seat belt cheater for 2007-13 GM trucks. Use at your own risk, but be free to choose. Category: Hand Tools

Downloads
143
Likes
12
Rating
0
P
PrintablesParsingphase

(Settlers of) Catan board game frame for 1st-3rd edition (pre-2007)

The first three editions of the classic Euro-boardgame “(The Settlers of) Catan” came without a frame to hold the board tiles in place. When the 2007 edition came out with a frame, an adapter kit was also released that's no longer…

Downloads
136
Likes
15
Rating
0
P
Printablessomekindarobit

Ibanez RG1570 Prestige (2007) back-plate

Back-plate for a 2007 Ibanez RG1570 Prestige. Might work on other RGs and/or other years. Not sure. Designed at 138.85mm x 85.7mm dimensions. My original back-plate has been falling apart over the years, mostly breaking around the screw…

Downloads
135
Likes
4
Rating
0
P
PrintablesBob

2003-2007 Cadillac CTS

2003-2007 Cadillac CTS model at 1:32 scale. The model can be printed in one piece, no assembly required. Print with supports. 10% infill is fine. A raft can help with bed adhesion, but is not required. This model is a heavily modified…

Downloads
134
Likes
9
Rating
0
P
PrintablesModel Magic

Trick 'r Treat - Sam - 2007

Trick 'r Treat - Sam - 2007 3D printable model.

Downloads
128
Likes
29
Rating
0
P
Printablessouthbaygsr

Keychain Tag (2007-2014 WRX)

Another WRX tag: 2007 to 2014 The bugeye version can be found here: Subaru Impreza WRX Keychain Tag (Bugeyes) by southbaygsr | Download free STL model | Printables.com 0.2mm, PLA, Sovol SV01

Downloads
125
Likes
23
Rating
0
P
PrintablesModel Magic

Vintage Video Games - Mass Effect - Miranda Lawson - 2007

Vintage Video Games - Mass Effect - Miranda Lawson - 2007 3D printable model.

Downloads
120
Likes
19
Rating
0
P
PrintablesModel Magic

Planet Terror - Cherry Darling - 2007

Planet Terror - Cherry Darling - 2007

Downloads
117
Likes
23
Rating
0
P
Printableshumming

2001-2007 Toyota Sequioa Cup Holder Adaptor for large Stanley cup

Simple drop in cup holder adaptor for large Stanley mugs to fit into the cup holder of a 2001-2007 Toyota Sequoia without falling over. Print in TPU for best results but PETG or ABS will also work.

Downloads
117
Likes
10
Rating
5
P
Printablesatform

Tapered Roller Bearings - 32005/32007

Functional tapered Roller Bearings in dimensions 35/62/18mm (32007) and 25/47/15mm (32005). You need 18 rolls for one bearing. I have printed the bearings in PETG without supports. For assembly you have to squezze all rolls between cage…

Downloads
109
Likes
22
Rating
5
P
PrintablesModel Magic

Western Movies - 3:10 to Yuma - 2007

Western Movies - 3:10 to Yuma - 2007 3D printable model.

Downloads
109
Likes
18
Rating
0
P
Printablespdxgeek

Improved cup holders for 2007-2018 Sprinter

These cupholders are big enough for most cups. Can easily fit a can that is inside a YETI coozie with some room to spare. Also has pen holders build into the space. sprinter-cup-base-cups-1.1 - Best version, clean.…

Downloads
105
Likes
11
Rating
0
P
PrintablesGiovanni1954

MOD. HYUNDAI TUCSON (2007)

MOD. HYUNDAI TUCSON (2007) Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W

Downloads
103
Likes
13
Rating
0
P
PrintablesIan Smith

Campagnolo Record 2007 QS - Front Derailleur Fork

The “fork” who links the two parts of the front derailleur (Campagnolo Record QS of 2007) break sometimes. There is no supply part available from Campagnolo, so I made one. Washer and the screw from the original part. (Original Number…

Downloads
103
Likes
1
Rating
0
P
PrintablesLMdesign

Cup holder reduction for Peugeot 308 I (2007-2013)

EN: This is a reduction for a peugeot 308 I (2007-2013) can or cup holder with the possibility to use it as a coin organizer. CS: Toto je redukce pro držák plechovky nebo kelímku do vozidla peugeot 308I (2007-2013) s možností využítí jako…

Downloads
99
Likes
17
Rating
0

Cover for Trunk Light for 2007 Opel Astra

Maybe this fits other older cars, just try it. I can only say that it fits the Opel Astra H from 2007. Print in translucent filament. There is no need for supports, because the overhangs are small enough. You will have to transfer the…

Downloads
97
Likes
9
Rating
0
P
PrintablesModel Magic

The Sopranos - Tony Soprano - 1999-2007

The Sopranos - Tony Soprano - 1999-2007

Downloads
95
Likes
16
Rating
0
P
PrintablesAllAbout3D

Kyosho DBX (2007) Lower Suspension Arm

Lower suspension arm for your old dbx nitro buggy. Non brittle filaments with good layer adhesion recommended. When you crash the part that breaks is the small hole holding the pin of the arm. I kept making it thicker and I believe I am…

Downloads
94
Likes
10
Rating
0
P
PrintablesTheBasedDoge

G35 / G37 (2007-2009) Center Console Tray

Just a basic tray to put your junk in. Fits perfectly in the slot inside the center console of the Infiniti G35 / G37 Category: Automotive

Downloads
93
Likes
16
Rating
5
P
PrintablesA0

Console latch for hyundai Elantra/Avante HD (2007-2010)

replacement console latch for hyundai Elantra/Avante HD (2007-2010) I tried to find 3d model or just buy it online and I couldn't so I made it :) , sorry if it wasn't as good as OEM I tried my best to make as close as I could (I'm not…

Downloads
92
Likes
15
Rating
0
P
PrintablesGeox

Seat Ibiza 6L (2002-2007) Car Keychain

A slick keychain of an Seat Ibiza 6L (2002-2007). Made to print in more colors, 16th and 17th layer if you use 0.2 hight. The seam in the photos is only from the modeling software and is not present in prints. No supports ofc🙃

Downloads
89
Likes
18
Rating
5
P
PrintablesModel Magic

The Mist - Backroom Scene - 2007

The Mist - Backroom Scene - 2007 3D printable model. Very easy to print. Be careful removing the supports from the axe, very fragile.

Downloads
88
Likes
19
Rating
0
P
PrintablesLumpawaroo

Nalgene/Hydroflask bottle holder for 2007 Honda CRV

This was designed for my sister's 2007 Honda CRV. I think it would probably work for any 3rd gen CRV, so 2007 - 2010. This is an adapter so a Nalgene or Hydroflask, or similar sized water bottle can fit in the cup holder. The V1 model was…

Downloads
87
Likes
12
Rating
0
P
Printablesslvkmkr

Seat Altea rear shelf hinge 2007-2015

You have to print this part with high temperature resistance filament - ASA, PC, Nylon, because of high temperature in summer.

Downloads
86
Likes
9
Rating
0
P
PrintablesModel Magic

Iconic Movie Moments - Planet Terror - Cherry Darling In Action - 2007

Iconic Movie Moments - Planet Terror - Cherry Darling In Action - 2007

Downloads
85
Likes
9
Rating
0
P
PrintablesRadu20

Kia sportage 2007 Sunvisor stopper

Edit: Updated to V3, small changes to fit better the arm of sun visor. Added additional versions that features a slot for M3 35mm bolt for extra rigidity (Even with PETG, in hot days, the little arm still wraps and bends from the sun…

Downloads
84
Likes
8
Rating
0
P
PrintablesNirNova98

Venom’s Spider (2007)

🕷 Embrace the sinister allure of 'Venom’s Spider (2007)' 3D model! Inspired by the iconic emblem from the 2007 film 'Spider-Man 3', this rendition captures the menacing essence of Venom's twisted symbiote. Perfect for fans of the darker…

Downloads
79
Likes
6
Rating
0
P
Printableswedgeworks

Monopoly - Electronic Banking Edition (2007) Replacement Credit Card

We love Monopoly and the Electronic Banking Edition from 2007 was one our favorite editions. But the dog got to it. Yeah, that didn't go well. So I had to make a replacement and figured may as well get the whole set done and identified in…

Downloads
78
Likes
10
Rating
0
P
PrintablesModel Magic

Stephen King's 1408 - John Cusack & Samuel L. Jackson - 2007

Stephen King's 1408 - 2007 3D printable model. Very easy to print, but it's tall and takes a while.

Downloads
75
Likes
22
Rating
0
P
PrintablesModel Magic

The Mist - Behemoth - 2007

The Mist - Behemoth - 2007

Downloads
71
Likes
16
Rating
0
P
PrintablesModel Magic

Horror Movies - REC - The Attic Woman - 2007

Horror Movies - REC - The Attic Woman - 2007 3D printable model.

Downloads
69
Likes
13
Rating
0
P
PrintablesModel Magic

The Sopranos - Carmela Soprano - 1999-2007

The Sopranos - Carmela Soprano - 1999-2007

Downloads
69
Likes
7
Rating
0
P
PrintablesMooMooBunnylips

“The King” figurine (3D scan of Burger King (2007) promotional Bobblehead for SuperBowl XLI)

Scanned with Revo POP2 3D scanner. Extra detail (Logos and text) added back to model with Tinkercad and Meshmixer. Done as an exercise with 3D scanner. Original was a Burger King Promotional Bobblehead Toy for Super Bowl XLI (coach w/…

Downloads
69
Likes
10
Rating
0
P
PrintablesKevinsaurus

Center Console Change Holder for RAV4 2007-2012

A change holder I designed for a '12 Rav4 Center console. I am not sure if all model years of this generation have the same center consoles. This Design allows change to be organised in the upper compartment of the RAV4's center console…

Downloads
68
Likes
11
Rating
4
P
PrintablesPDG

Volvo V70 2000-2007 (P26) tow bar protection cover replacement

Replacement of cover for badluckers who lost original cover and just have original cover holder. There is hole for screw and nut so aou can tighten the cover to not loose it again. Mine is on my car for several years without any problem.…

Downloads
68
Likes
7
Rating
0
P
PrintablesModel Magic

The Price is Right - Bob Barker - 1972-2007

The Price is Right - Bob Barker - 1972 2007 3D printable model.

Downloads
67
Likes
17
Rating
0
P
Printablesiyofs

ford expedition 2007 - 2014 overhead console Hinge

Ford Expedition Overhead Console Hinge This is a replacement hinge for the sunglasses holder or conversation mirror in the overhead console of a 2007–2014 Ford Expedition . Print Settings: Supports: Tree Infill: Any (100% preferred)…

Downloads
66
Likes
0
Rating
5
P
PrintablesModel Magic

The Mist - Gray Widower - 2007

The Mist - Gray Widower - 2007 3D printable model.

Downloads
66
Likes
16
Rating
0
P
PrintablesKaipai

Cobb Accessport Vent Mount WRX STI 2002-2007

Basic vent mount for a Cobb Accessport that should fit any 2002-2007 WRX. Pictured is my 2006 STI. With a 66° C glass transition temperature, PETG-HF works fine for me with occasional 100° F (~38° C) days. If you live in AZ, you might…

Downloads
63
Likes
4
Rating
0
P
PrintablesJohn Cortese

Jeep Wrangler JK/JKU (2007–2018) Liftgate Hinge Cover — Functional Replacement

Replacement liftgate hinge cover for Jeep Wrangler JK/JKU (2007–2018) . I made this because I didn’t want to spend $10 on a tiny OEM plastic piece, and I wanted something that looks as close to stock as I could get. This is the 5th…

Downloads
62
Likes
14
Rating
5
P
PrintablesWimBoSon

Dash Switch Holder for Sprinter 906 2007-18 (16mm Switch)

The switch must be glued in place, as there is not enough space for the lock nut. For best results, print in PETG to ensure sufficient flexibility for the clips.

Downloads
61
Likes
9
Rating
0
P
PrintablesModel Magic

The Sopranos - Bobby Bacala Baccalieri - 1999-2007

The Sopranos - Bobby Bacala Baccalieri - 1999-2007

Downloads
60
Likes
10
Rating
0
P
PrintablesModel Magic

The Sopranos - Paulie Walnuts Gualtieri - 1999-2007

The Sopranos - Paulie Walnuts Gualtieri - 1999-2007

Downloads
60
Likes
12
Rating
0
P
PrintablesFleeeinIan3D

Subaru Emblem Oval Base w/ Zip Tie Attachment - 2006-2007 Subaru Legacy Outback / Forester / WRX

I designed an oval base to fit a 2006-2007 Subaru Legacy Outback Oval emblem (link below). I used the base to zip tie it to my 2012 Forester Sport Grill. Worked absolutely perfect, and looks great (factory, even). Not sure if it will work…

Downloads
59
Likes
7
Rating
0
P
PrintablesDaParts

Bumper Diffuser for Toyota Camry 2007-2011

I designed this set of diffusers to fit directly around the bumper of a Toyota Camry between the years of 2007-2011. Make sure to apply a couple coats of clear coat to protect it from the weather. I applied it with JB Weld and magnets to…

Downloads
59
Likes
10
Rating
0
P
PrintablesSkyWolf

Honda CBR600RR 2007-2012 Undertail Plate Mount

Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament: WYZ Works PLA Black Category: Automotive

Downloads
59
Likes
8
Rating
5
P
PrintablesModel Magic

The Sopranos - Corrado Junior Soprano - 1999-2007

The Sopranos - Corrado Junior Soprano - 1999-2007

Downloads
58
Likes
8
Rating
0
P
PrintablesZinc

Opel corsa D 2007 window handle

Print top part with 100% infill. Printed at 0.4mm 0.3mm layer height

Downloads
58
Likes
2
Rating
0
P
PrintablesModel Magic

The Sopranos - Dr. Jennifer Melfi - 1999-2007

The Sopranos - Dr. Jennifer Melfi - 1999-2007

Downloads
57
Likes
11
Rating
0
P
PrintablesModel Magic

The Sopranos - Meadow Soprano - 1999-2007

zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz🖨 RECOMMENDED PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable…

Downloads
57
Likes
7
Rating
0
P
PrintablesDedoper

Ventilation slider for Peugeot 308 2007-2013

Replace ventilation button of a Peugeot 308 year 2007-2013 but may fit more models 0.2 layer high 25%infill PETG

Downloads
56
Likes
13
Rating
0
P

Kangoo 2 (2007-2016) rear door inner handle

First version which happened to work as intended. Aint pretty, but works. There's an issue with scaling. instead of 80mm it has 8mm

Downloads
55
Likes
9
Rating
0
P
PrintablesModel Magic

Iconic Movie Moments - Elizabeth The Golden Age - The Spanish Standoff - 2007

Iconic Movie Moments - Elizabeth The Golden Age - The Spanish Standoff - 2007

Downloads
55
Likes
14
Rating
0
P
Printables70r71

Honda Hornet 600 (2007) Air starter lever

This is a W.I.P. we are currently testing the part. Due to the presence of small grooves and overhangs, the original piece itself is not printable as a single piece. I designed the model as three piece in order to be printed without…

Downloads
55
Likes
5
Rating
0
P
PrintablesModel Magic
18+

The source marked this model as adult content.

Downloads
54
Likes
19
Rating
0
P
PrintablesAlex Don

Ikea Cam Lock Nut #120076

I don't know where my cam lock nuts went so I quickly made some for myself, so my drawers don't fall apart everytime I open them. To print properly reference one of the images! :)

Downloads
53
Likes
2
Rating
5
P
PrintablesQuietMike

S&W Shield Center Console Holster adapter for 2007-2008 Honda Fit

This is pretty specific item, but you never know, someone might find it useful This fits the small pocket in the center console, apply some double sided tape or hot glue to the bottom of the model to secure it.

Downloads
53
Likes
12
Rating
0
P
PrintablesModel Magic

The Sopranos - Christopher Moltisanti - 1999-2007

The Sopranos - Christopher Moltisanti - 1999-2007

Downloads
52
Likes
11
Rating
5
P
PrintablesRyukyuD

CTS-V Sunroof Handle (2004-2007)

My solution to the stock handle, where the tabs break over time. This design uses a shim instead, so it shouldn't break. The ABS and ASA models have tags, in case you print multiple materials in the same color. Scale to 102% for ABS and…

Downloads
52
Likes
8
Rating
0
P
Printablesdriveslow48

Subaru Impreza WRX 2006 2007 gear lever bushing

My WRX was missing one of these, and the other was all worn out. Replacing these fixed my gear lever flop. Not a high temp environment nor a critical safety piece, so safe to print and use. Tolerances are tight with my flashforge finder,…

Downloads
51
Likes
11
Rating
0
P
PrintablesDan

2005-2007 Infiniti G35 Coupé (Nissan Skyline) Ashtray Cubby Replacement

2005 - 2007 Infiniti G35 Coupé (Nissan Skyline) Ashtray Cubby Replacement Print this out to replace the inner ashtray assembly at the centre console of your G35. This is for the 2005 - 2007 G35 "refresh" models. I personally have a 2006…

Downloads
51
Likes
9
Rating
0
P
PrintablesGeox

Seat Ibiza 6L (2002-2007) Car Silhouette

Silhouette of an Ibiza 6L that was bodykited by MangaTuning Around 170 x 100 x 10 mm Scaleable

Downloads
50
Likes
16
Rating
0
P
PrintablesTheBasedDoge

G35/G37 Hidden Switch panel (2007-2009)

Stealthy switch panel for G35 / G37s. replaces the "not an ashtray" insert and fits 2 16mm buttons. I used mine to disable traction control and AWD. Category: Automotive

Downloads
50
Likes
6
Rating
0
P
PrintablesModel Magic

The Mist - The Bite Before the Swelling - 2007

The Mist - The Bite Before the Swelling - 2007 3D printable model.

Downloads
50
Likes
14
Rating
0
P
PrintablesMementoArgonaut

2002-2007 Honda Jazz/Fit front seats sliding lever

My 2007 Honda Jazz front seat sliding lever broke, so I designed a new one to replace it. I printed it in ASA with 5 walls and 40% infill. There are 2 STL versions one with normal and one with tighter fit, start with the normal one and…

Downloads
50
Likes
7
Rating
0
P
PrintablesUltra-G

Old Brompton (2007) Crank protector

A small crank cover for older Brompton models (mine is a 2007). On the picture printed with generic ASA with 0.8 nozzle and 0.32 layer height. Straightforward to print. Enjoy CAD files included if you need to make some adjustments

Downloads
48
Likes
6
Rating
0
P
PrintablesModel Magic

The Sopranos - Silvio Dante - 1999-2007

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
48
Likes
7
Rating
0
P
PrintablesRadu20

Kia sportage 2007 Sunvisor stopper

A common problem with 2007 Kia Sportage's Sun visor is that the tensioning system fails over time and the Visor falls down, usually at an uncomfortable level. Because my sun visor would not stay closed, I decided to make to make a clip…

Downloads
46
Likes
1
Rating
0

Mazda 6 2007 coin tray / shelf

Dont print in PLA, it will melt. Easy to print with no supports

Downloads
45
Likes
5
Rating
0
P
PrintablesDick Ursby

Volvo XC70 / V70 P3 (2007 - 2016) roof rail mount

Needed a non-destructive way to mount work lights to my 2016 XC70, but I didn't want to drill any holes, so I made this mount. Printed with Bambulabs H2D, ABS and 30-35% infill. This will unfortunately not fit the P2 roof rails. There are…

Downloads
45
Likes
7
Rating
0

2007 Nascar Gen-5 Chassis

The Car of Tomorrow (CoT) was the common name used for the chassis of the NASCAR Cup Series (2007 – 2012) and Xfinity Series (since 2011 full-time) race cars. The car was part of a five-year project to create a safer vehicle following…

Downloads
45
Likes
4
Rating
0
P
PrintablesModel Magic

The Sopranos - Janice Soprano - 1999-2007

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
44
Likes
7
Rating
0
P
PrintablesFirebrick43

GMT800 LT Silverado / Tahoe / Suburban / Yukon ATOTO USB (1999-2007)

These prints are to install the Atoto USB ports into the dash of a GMT800. They use the original cubby if so equipped. The dash face plate easily pops off (see youtube) and you can remove the cubby by removing the M8 headed screws. The…

Downloads
43
Likes
11
Rating
0
P
PrintablesLionel Draghi

Radio button for Qashkai J10 (2007 - 2013)

Done for Marie, thanks to Seb for the first experience on 3D printing long before I had my own printer. May be printed face down, with no brim and no support. But if your first layer isn't perfectly fine-tuned, or depending on your plate…

Downloads
41
Likes
1
Rating
0
P
Printableschr15

2007 Vectra C Wiper Pop Socket

This was designed to fix the Wiper Arm on my Vectra C, it was printed in PETG because of the outdoor use as its under the bonnet of the car. if i had abs at the time i would have done it in ABS but i didnt unfortunately my setting for…

Downloads
40
Likes
2
Rating
0