Jeep Wrangler JK/JKU (2007–2018) Liftgate Hinge Cover — Functional Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement liftgate hinge cover for Jeep Wrangler JK/JKU (2007–2018). I made this because I didn’t want to spend $10 on a tiny OEM plastic piece, and I wanted something that looks as close to stock as I could get.
This is the 5th iteration of the design and has been on my Jeep for about 6 months. I’m a Fusion 360 novice, and this project took 25+ hours of design updates and test prints to keep it from snapping, strengthen the weak points, and dial in the fit.
If this model helps you, please consider leaving a like and sharing your make so I can keep creating and improving functional parts.
Remixes & Community
Remixes are welcome and encouraged. Please share your build—I’d love to see this printed in different colors to add extra personalization.
Recommended Print Settings
Material: PETG or ASA (preferred)
Infill: 80%
Wall loops/perimeters: 4
Supports: Tree supports (Auto)
Layer height: 0.20 mm (or your normal PETG/ASA profile)
Bed adhesion: Optional (brim if needed)
PLA is not recommended for long-term outdoor use due to heat/UV exposure.
Installation
Line up the round hinge section and snap it on (should go on easily, but may be snug).
If needed, use a drop of silicone spray or light oil to help it seat.
Gently press and rotate the bottom into position until fully seated.
Do not force it—light sanding or a small scaling adjustment may help depending on printer/material tolerances.
Fitment Note
Fit may vary due to printer calibration, material shrink, and hinge tolerances (especially with aftermarket parts). Scaling ±0.5–1% or light sanding may be required for the best fit.