Counting matching models…
THE PROBLEM: OLD FRAME VS. NEW BRAKES I designed this part to replace the missing original cable guide on my 2013 Kona Satori. When upgrading to modern Shimano BR-MT420 4-piston brakes, I discovered that on almost all modern Shimano…
Small cup to fill hole in the dash. Print at a angle with tree supports so you get a clean front Added a taller version also
dd-liberator DD Liberator 3D Gun Blueprint This is the Defense Distributed 3D Printed Gun Template. State Department Demands Blueprint Removed: http://techcrunch.com/2013/05/09/state-department-demands-3-d-gun-blueprints-be-removed/ ITAR:…
So, I took the original model, a small, 1:64 scale model of the NASCAR, and upsized it to be THE SIZE OF THE REAL THING!! 1:1 scale, model car. If you actually print this, beware that it is not split into pieces. It is one whole thing.…
USB+AUX changed to only USB in glove compartment, because the stock radio was replaced and the mechanic can't connect the factory USB+AUX connector to the new radio, and we decided to change the connector to only one USB.
My Simplicity vacuum (2013) cord hook broke so I designed a replacement.
V3 Moved the phone farther out and angled/tilted it up/back at 75 degrees (or leans back 15 degrees). I removed the bracing and printed in PETG and it's been working fine. Added Fusion 360 files (f3d, 3mf, stl). V1 Designed to fit the…
If you want to get this template without subscribing, write me in chat! - SideSilhouette
I redesigned this because I was never fully satisfied with the original design. This clip fits more securely and holds the hood rod better as well. I'm going to leave the original up as there were several makes uploaded with positive…
I wanted a large tray for my center console to store things I needed. I found the one that came with the car too small and reaching in too difficult to find key things. Print with supports for the lip so that you get a good quality base.…
I've used Xblitz phone holder with charger but unfortunately the sticky rubber used to hold it in place didn't work well due to textured surfaces in the car. This is a replacement for the base of the charger - I guess with slight…
can be printed together or separately in other colours can be printed without support the Dodge Charger is very realistic Print in place kit card , Assembly required
MagSafe Magnet bought on AliExpress: https://de.aliexpress.com/item/1005007153207698.html?gatewayAdapt=glo2deu
Replace ventilation button of a Peugeot 308 year 2007-2013 but may fit more models 0.2 layer high 25%infill PETG
I installed LED bulbs for the interior lights and realized that it was too bright for my liking so I made these diffusers to make them dimmer. Tested on a 2013 Mazda 6 so I'm assuming it'll work on all gen 3 Mazdas but not sure. If you…
If your rain sensor won't stay on the bracket mounted to your windshield, the likely cause is a lost “TAB B” which slots into the front of the sensor casing and serves to secure the casing to the bracket. “TAB B” is not sold by itself,…
These are replacement mounting brackets for the rear bumper of 2010-2013 Mazda 3 cars. If you've ever been in a minor fender bender, the OEM mounting brackets are designed to shear to protect the frame. They are integrated into the bumper…
If the measurements are off, let me know. I had two photos to go off of and used a nickel (21.21mm) for scale! :D
Designed based on the dimensions of the original 2011 Nissan Altima battery terminal cover. Fits Altima, Maxima, Murano and Quest from 2007 to 2013. Printed and tested with PETG with 100% infill. Passed 300+ open and close fatigue test.…
I created this to fix my brittle cracking AC vent rings in my Mazda 6 2010. It should work for all Mazda 6 2nd gen cars and likely Mazda 3 2nd gen cars as well. I'd recommend printing in PETG or other higher temp plastics as PLA will melt…
My friend has a 2012 Toyota Corolla, and his Keyfob exploded. He reached out, and a short time later, I found a model on Thingiverse. I printed it but disliked how we couldn't find actual hardware or how some of the tolerances weren't the…
This is a replacement retaining ring designed specifically for the xenon headlights on the C6 Corvette (2005-2013). This ring securely holds the headlight assembly in place, preventing movement and ensuring proper beam alignment. A…
This model is compatible with the lego system.
Soporte para centrar y colocar mejor una camara de reversa en la parte posterior justo por encima del porta placas, en una renault duster de los modelos 2013 al 2020. Yo lo imprimi en PETG con un relleno del 50% o 60% en una MK4.
Dual Intake This was a project that took over 1 year to complete. I want to recognize Austin Chandler for helping with the R&D as well as Isaac Fischer at Fischer Motor Works for providing advice and filters when I was selling these in…
Phillips Universal Remote, model SRP2013 CL5 universal mount. Using the airmax controller file with the rounded geometry that matches my remote, I scaled the original to fit my Phillips remote control snugly. Original interior dims were…
Models included are labeled R or L for right or left side of the car. The original clip incorporates a 11x10x3mm steel ring to support the area directly underneath the bolt that holds it in place. This replacement reuses that steel ring.
Der Halter wird unter das obere (nur drauf gesteckte) Windschild montiert. Dazu das Windschild nach oben aus den Gummis ziehen und die 4 darunter liegenden Inbusschrauben entfernen. Darunter den gedruckten Halter, ggf. mit 15mm längeren…
Fits a 1" tweeter (1.72" outer diamater shell) with mounts for GEN 1 2010-2013 Kia Soul. Modeled after my 2011. Originally modeled for BOSS 1" tweeter from Amazon. UPDATE 1.1: I printed the original model and it worked / I managed to…
Skadis NeuMaster NSD2013 Drill Holder with OpenSCAD script
Please visit http://www.myminifactory.com/object/view/624/Seasons-Greetings-Ornament and download a copy of this model if you really enjoyed it. Thanks! Seasonal ornament designed for this years www.MyMiniFactory.com winter holiday 3d…
Nissan Pathfinder - Center Console Organizer Tray Great addition to Pathfinder: Pathfinder Armrest Storage Box is too deep and items in it are usually placed in disorder. This organizer tray can expand the capacity of Pathfinder armrest…
I'm a fan of Mountian Dew Zero, but when I got my 2013 Tacoma the 20oz bottles won't fit in the cup holder. This was one of my first practical 3D designs. I printed it out of PETG since it would need to handle the extreme heat in Las…
I didn't like any of the existing dash mounts for my cell phone, they all looked big and bulky sitting on the dash or in a cup holder. I designed this to follow the lines of my 2013 Tacoma dash. It use the RAM mount ¼ ball system, along…
I designed a custom organizer for the center console of a 2013 Toyota RAV4 Platinum edition. The goal was to create a more functional space for everyday essentials while keeping everything neatly in place. The organizer features dedicated…
Coin holder for your Subaru Forester SH. Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** No Supports: No **Resolution:** 0.16 Infill: 25% **Filament:** 3D Solutech PETG Red Notes: Easy print, fits in the little slot…
Needed a place to keep coins for parking meters. There were a couple of designs available but they included pennies which I don't need and were a bit tall for what I was looking for. This mounts in the little pocket next to the square cup…
Nissan Pathfinder - Center Console Mag Charger Tray Great addition to Pathfinder: Pathfinder Armrest Storage Box is too deep, and items are usually placed in disorder. This mag charger tray can expand the capacity of the Pathfinder…
I modeled this from the one that came with the replacement weir assembly I purchased for my hot tub. Link for the entire weir and grill assembly is here: https://dreammakerspas.com/products/520004-2013-2018-weir-assembly-espresso…
Replaces the center console coin sorter with one that holds Loonies, Twonies, and quarters.
Cupholder to fill the center console void in the 2013-2016 RAM 2500 truck
I just recently got a project car that was abandoned and needed some TLC. Lo and behold, it tried to leave me stranded at school. Managed to get it in drive and the auto parts store didn't have the bushing I needed to took some…
A riser, and a cable organizer for the Apple Macpro 6,1 helps with ventilation Please LIKE if you download.
Replacement Battery band for 2002-2013 Kawasaki Part number 92072-1406 Category: Automotive
Small clip to hang walkie talkie out of the small cubby hole to the right of the radio in a 2013 f150. UNTESTED Category: Parts
I've designed a Trunk curtain retainer for KIA CEED SW (2006-2013) The original numbers are: for left 859371H600, for right 859381H600 This 3D Model was printed with ASA and ABS filaments. This is my third design in Printables, so please…
Printed with ASA GF, 3 walls 15% infill. i modeled it to work, not look pretty so you 1 person who downloads this will get some scars from the supports. Clips onto the left hand vents on the driver side.
I recommend you to place the top part on the print bed while slicing and to add supports. I may or may not release a better version which is symmetrical for all people with OCD
The mounting nut of the installation socket covers the access to the release mechanism. The gap in this spacer ring allows access and release again.
This is a custom mounting adapter for the LAMTTO 9.26" Wireless CarPlay and Android Auto Portable Touchscreen . It serves as a replacement for the stock mounts included with the LAMTTO kit and is designed to reuse the existing mounting…
A mini trash can / rubbish bin for a Nissan Leaf AZE0 2013-2017 side door pocket. Useful for putting bits of rubbish and easily pulling out to empty. Printing : I recommend using concentric wall & infill pattern. Use supports for the flat…
infill 25%+ perimeter 4+ PETG prosim pri kaťdom modele dajte opravit pomocou windows je tam vela detailov ktore su tažko opravitelne. a slicer si snimi lahko poradi. jedna čast sa na svetlo lepí za použitie dvojzložkového lepidla a druha…
Fits well enough. Printed in PLA with supports under the overhang. Spare part for Volvo V70 2007-2013 Reference number for spare part 31353583 2
Heated seat control knob (2013-2018 Toyota Avalon) In case you lost yours or destroyed it and don't buy replacement and then accidentally get the back seat knobs even though they say they're universal these are for the front seat only and…
Gear threads are left-handed, made to fit an Android Galaxy S8 caseless, straight gear has a small hole on one end as it was intended for another project but if works great here. While printing the holder, I did not use supports for the…
This is a dash mount for the $79 Carpuride C94 ( https://amzn.to/48iGrer ) 10.26 ASIN B0DHGPQDK7 for a 2013 BMW X6 (should fit the X5) that I made for a friend. It sits in the factory cubby and holds the Carpuride head unit in front of…
SEAT Leon 5F FR Logos — Pre-Facelift (2012–2016) Custom 3D-printed FR badges designed specifically for the SEAT Leon 5F pre-facelift (2012–2016) . You will find two different model options depending on your printer setup: 🟥 For…
makes the eco boost have turbo flutter ( stustustu) print and use grey piece from original hose , clicks right on
Designed this in 2016 as part of an attempt to move from Solidworks to Fusion 360 Its modelled off a few concept reference sketches released shortly after the movie was released
I, like a moron, dropped the lock pin for my cross bar somewhere. Can't seem to find these to purchase online, so I made it. It will be a slightly looser fit than the original - that's okay. The originals simply break with enough force…
This is an aftermarket LED puddle light adapter bracket for a 2013 Dodge Dart. It allows an aftermarket LED to be securely mounted in the factory puddle light opening, providing a replacement solution since the original manufacturer part…
It is a remix from this one: https://www.thingiverse.com/thing:7100587 This is an adapter for the Hyundai i30 (2013) to retrofit the Philips Ultinon Pro6000 Boost H7-LED. The ring form the LED needs to be detached, that fit this one over…
Prevents water and dirt from entering the tip screw. Print in TPU
Same as OG except no ball. Just creates a flat surface to stick whatever phone mount (or other mount) you want to it.
An elegant NAS/Server with support for 3.5 inch drive and active cooling with a fan. It works wonder as a backup server, for example for TimeMachine or ZFS replication. If you want to use ZFS remember to use the 64 bit version of…
Jeep Grand Cherokee 2012 Model, headlight fender cap cover tested, workds perfectly
Updated replacement cap with clips for a Mazda CX-5/Mazda6 shifter switch ignition lever KDY0-46-040.
THE PROBLEM: OLD FRAME VS. NEW BRAKES I designed this part to replace the missing original cable guide on my 2013 Kona Satori. When upgrading to modern Shimano BR-MT420 4-piston brakes, I discovered that on almost all modern Shimano…
Small cup to fill hole in the dash. Print at a angle with tree supports so you get a clean front Added a taller version also
dd-liberator DD Liberator 3D Gun Blueprint This is the Defense Distributed 3D Printed Gun Template. State Department Demands Blueprint Removed: http://techcrunch.com/2013/05/09/state-department-demands-3-d-gun-blueprints-be-removed/ ITAR:…
So, I took the original model, a small, 1:64 scale model of the NASCAR, and upsized it to be THE SIZE OF THE REAL THING!! 1:1 scale, model car. If you actually print this, beware that it is not split into pieces. It is one whole thing.…
this is a Template for over head cupboards in a 2013 Mercedes sprinter hopefully it helps some one as it did save me a ton of time. please note this is uploaded and created to benefit the community free of charge I do not give permission…
I got tired of my smaller canned beverages sloshing around and causing spills. The cup holders are ~87.6mm (3.4inch) diameter, far too large to properly support smaller than standard cans. My MtnDew Kickstart, IZZE juice, or other 8.4oz…
Detailed wallart of the famous S197 2012-2014 Ford Mustang (and GT), Easy to print . Of course you can scale it the size you want. I added a .3mf for a 2 part version with the length of 490mm. I recomend a strength of about 2-4mm. Add…
This is a hood prop rod grommet for a 2013 Ford Escape. It is designed to provide a snug fit and support the hood prop rod securely in place. To install just press the grommet into place without the rod and put the rod back in place after…
USB+AUX changed to only USB in glove compartment, because the stock radio was replaced and the mechanic can't connect the factory USB+AUX connector to the new radio, and we decided to change the connector to only one USB.
Print with supports for underside and mirrors. Infill can be quite low (5-10%) Doesn't need to be strong. Sliced files are added for an ender 3. The two sides will glue together or can be printed as 1 whole part.
The little plastic plug the covers the Neutral override in your 545RFE or 65RFE equipped 4th gen Ram. May fit others. You should probably use something heat more heat resistant than PLA. It the summer with the windows up, PLA will warp…
Una Piedra rompió la parrilla de mi auto, y como el cambio no es una tarea facil diseñe este Logo de IAVA que va exactamente sobre la parrilla para que la rotura no se note. Se imprimio en : Filamento : PLA+ 3nMax Color:Gris Plomo. Altura…
Replacement sun visor mirror cover for 2013 Volvo XC90 (or compatible) Should work as replacement for 2007-2014 Volvo XC90 - Sun-Visor Cover - Volvo (39899610) Might need more strength, but it's working for now. My sun visor was cracked…
In case it isn't clear by the license below or you're unfamiliar with my typical release model, I release this repo into the public domain. You are free to modify, sell, print, remix, etc in both private and commercial settings without…
Fuel flap for Ford Fiesta MK6 (2013). Printed on a resin printer Anycubic Photon Mono 4K,. Perfect fit on my car ! Designed with Blender and Openscad
Hey so this is led adapter for front grill from GT version that does not require high beam lights. It's requires three M3 bolts for each side and fits factory holes for high beam lights. It's also requires LED's from BMW LED COTTON SMD…
2 top gear logo keychains one from 2002-2013 and 2013-2017 enjoy!! model my self
This bracket goes in between the license plate light screws and the rear bumper. You might have to take the metal clips off your license plate light assembly first if you plan on using a bigger screw - I was going to just use the original…
I've been trying to consolidate my homelab setup, so i can actually use the desk it's sitting on. Part of that includes finding somewhere to stash my 2013 Mac Pros (yes, i use multiple. yes, i know how inefficient they are), so i figured…
![Raspberry Pi NAS / Server Case [3.5 HDD] [Mac Pro 2013 lookalike]](https://media.printables.com/media/prints/156827/images/1466768_f9a7bf10-02b0-494f-aa7e-e80efc89f8a6/large_display_img_3290_156827.jpg)
