1 / 3
Jeep Wrangler JK/JKU (2007–2018) Liftgate Hinge Cover — Functional Replacement — zdjęcie 1
1 / 3

Jeep Wrangler JK/JKU (2007–2018) Liftgate Hinge Cover — Functional Replacement

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement liftgate hinge cover for JK/JKU (07–18) so you don’t have to buy the small OEM plastic piece.

Ocena
5 / 5
Polubienia
14
Pobrania
62
Wydruki
0
Wyświetlenia
418
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Replacement liftgate hinge cover for Jeep Wrangler JK/JKU (2007–2018). I made this because I didn’t want to spend $10 on a tiny OEM plastic piece, and I wanted something that looks as close to stock as I could get.

This is the 5th iteration of the design and has been on my Jeep for about 6 months. I’m a Fusion 360 novice, and this project took 25+ hours of design updates and test prints to keep it from snapping, strengthen the weak points, and dial in the fit.

If this model helps you, please consider leaving a like and sharing your make so I can keep creating and improving functional parts.


Remixes & Community

Remixes are welcome and encouraged. Please share your build—I’d love to see this printed in different colors to add extra personalization.


Recommended Print Settings

  • Material: PETG or ASA (preferred)

  • Infill: 80%

  • Wall loops/perimeters: 4

  • Supports: Tree supports (Auto)

  • Layer height: 0.20 mm (or your normal PETG/ASA profile)

  • Bed adhesion: Optional (brim if needed)

PLA is not recommended for long-term outdoor use due to heat/UV exposure.


Installation

  1. Line up the round hinge section and snap it on (should go on easily, but may be snug).

  2. If needed, use a drop of silicone spray or light oil to help it seat.

  3. Gently press and rotate the bottom into position until fully seated.

  4. Do not force it—light sanding or a small scaling adjustment may help depending on printer/material tolerances.


Fitment Note

Fit may vary due to printer calibration, material shrink, and hinge tolerances (especially with aftermarket parts). Scaling ±0.5–1% or light sanding may be required for the best fit.

Tagi