Cubby Drawer for Tesla Model S (2013-2020) and Model X (2016-2020)
How it started: How it went: How it ended:
Print approx. €6.04–€7.39 excl. taxPreliminary estimate for one variant
- Downloads
- 262
- Likes
- 34
- Rating
- 0
208 models
How it started: How it went: How it ended:
Print approx. €6.04–€7.39 excl. taxPreliminary estimate for one variant
I didn't like any of the existing dash mounts for my cell phone, they all looked big and bulky sitting on the dash or in a cup holder. I designed this to follow the lines of my 2013 Tacoma dash. It use the RAM mount ¼ ball system, along…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for PETGSource material: PET
PRUSA Prusament PLA Lipstick Red
Print approx. €13.98–€17.09 excl. taxPreliminary estimate for one variant
I don't like how chunky most phone holders are (due to wanting to fit any/all phones), or how they mount to your air vent or windscreen, 2 things I kinda need unobstructed. I wanted it out of the way, but still reachable, and figured the…
Print approx. €1.65–€2.02 excl. taxPreliminary estimate for one variant
This is a stand to hold a macbook pro 13" late 2013 (thickness 18mm) in upright position. To protect the macbook's surface from scratches I glued 6 felt protectors into the appropriate positions. The protectors I used were about 10mm in…
Print approx. €3.95–€4.83 excl. taxPreliminary estimate for one variant
Phone holder 155mm wide 80mm tall 40mm deep. It fit 2013 ram
Print approx. €5.00–€6.11 excl. taxPreliminary estimate for PETGSource material: PET
I'm a fan of Mountian Dew Zero, but when I got my 2013 Tacoma the 20oz bottles won't fit in the cup holder. This was one of my first practical 3D designs. I printed it out of PETG since it would need to handle the extreme heat in Las…
Print approx. €6.00–€7.33 excl. taxPreliminary estimate for PETGSource material: PET
This model is compatible with the lego system.
Dual Intake This was a project that took over 1 year to complete. I want to recognize Austin Chandler for helping with the R&D as well as Isaac Fischer at Fischer Motor Works for providing advice and filters when I was selling these in…
Recommended supports
dd-liberator DD Liberator 3D Gun Blueprint This is the Defense Distributed 3D Printed Gun Template. State Department Demands Blueprint Removed: http://techcrunch.com/2013/05/09/state-department-demands-3-d-gun-blueprints-be-removed/ ITAR:…
can be printed together or separately in other colours can be printed without support the Dodge Charger is very realistic Print in place kit card , Assembly required
This model is compatible with the lego system.
Cup holder for MB C180 W204. Cup holder for MB C180 2013 "W204" 2013 model. Most probably works for other year models as well. My son asked for a Cup holder for C-180 W204 2013 . Works with booster can (with bushing for 59mm cans and…
TLDR; Fixes your handbrake button on Skoda Octavia (and maybe other VAG cars) if it popped off, and won't stay back on. (Updated 2024-07-04. User gon on the below forum informed me that the tip was 1.5mm too long. I've removed 1.2mm, and…
V3 Moved the phone farther out and angled/tilted it up/back at 75 degrees (or leans back 15 degrees). I removed the bracing and printed in PETG and it's been working fine. Added Fusion 360 files (f3d, 3mf, stl). V1 Designed to fit the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
If you want to get this template without subscribing, write me in chat! - SideSilhouette
An elegant NAS/Server with support for 3.5 inch drive and active cooling with a fan. It works wonder as a backup server, for example for TimeMachine or ZFS replication. If you want to use ZFS remember to use the 64 bit version of…
I redesigned this because I was never fully satisfied with the original design. This clip fits more securely and holds the hood rod better as well. I'm going to leave the original up as there were several makes uploaded with positive…
Designed based on the dimensions of the original 2011 Nissan Altima battery terminal cover. Fits Altima, Maxima, Murano and Quest from 2007 to 2013. Printed and tested with PETG with 100% infill. Passed 300+ open and close fatigue test.…
It just slides along the top of an iMac ;) I made mine for the 2017 27" 5k iMac with the “Thin Unibody” design, but it should work with really any 2012-2020 model iMac with the same basic body. All the little print does is sit in front of…
LOGO FORD FIESTA Conserva las medidas originales de fabrica!
I got tired of my smaller canned beverages sloshing around and causing spills. The cup holders are ~87.6mm (3.4inch) diameter, far too large to properly support smaller than standard cans. My MtnDew Kickstart, IZZE juice, or other 8.4oz…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Phone stand for the Peugeot 308 (2007-2013). There are two versions, one in two pieces, with a mat that can be printed on TPU or flexible filament, and the other on one whole piece. The tray is designed so the phone can be on landscape…
I created this mount for my 2013 F-350. It is designed with a recess for 4 BC63 (3/4" x 3/8" x 3/16" thick) neodymium magnets. I epoxied (I used JBWeld) them into place and attached a piece of sticky backed rubber over them to provide a…
No longer will you have to tolerate the derision of the unimaginative, convert your “trashcan” into an Imperial Astromech and bring order to the galaxy! This is a remix of DDDylon's fantastic Galactic Droid Base model, all credit to them…
These rails vertically mount a Macbook Pro on a wall or under a desk. Compatible with portrait and landscape mounting. The bracket dimensions are: h: 155.6mm w: 51.4mm d: 32mm It is designed for 18mm MBPs which includes the following:…
Hello there, I've created an adapter for the 250ml cans. The adapter is press-fit into the old cupholder. To improve grip, I designed spring-loaded pins to secure the can. Enjoy!
This is a replacement part of the cargo cover bracket for a Ford Fiesta. I have one from 2015 but the range from 2013 to 2018 should be similar. Just check the picture of the original piece to see if it matches your car. Be careful when…
Overview This is a Magsafe charger for a MK6 VW GTI. Created using a scan of the car shifter area taken with an iPhone app (scan in files section). The charger mounts using only friction, so no holes and no glue to damage the car's…
I didn't want to order a mount for my speakers so I made one quick in fusion 360. Print in PETG or stronger. Print with standard supports and model laying flat on the back. Included Fusion 360 file to edit for your own needs.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I noticed that the grommet disintegrated and the antenna was just rattling in the hole. I had some MatterHackers TPU loaded already and tried making a grommet to fit over the antenna shaft and press into place in the body sheet metal. I…
My friend has a 2012 Toyota Corolla, and his Keyfob exploded. He reached out, and a short time later, I found a model on Thingiverse. I printed it but disliked how we couldn't find actual hardware or how some of the tolerances weren't the…
Needed to put a Mac Pro on it's side to fit on a rackmount shelf. There are two prints -- a longer one that will fit on a 200x250 bed (we're using a MakerGear M2), and a shorter one for a 200x200 bed. We printed one and it works great…
Magnetic mobile phone mount fits a BMW 320i 2013. Mounts in the only place I could find where the phone can be mounted and not block any of the controls, vents or instruments. Mounts on the side panel to the right of the cup holders (Left…
Mobile Holder for Audi Q7 2005-2013 I used cheap ring light phone holder and designed the part to attach on dash.. simple insert.. very firm grip. better print in abs or petg to withhold extreme weather. use supports and print lying on…
Hansel and Gretel: Witch Hunters - Gretel - 2013 3d printable model.
Other helicopters in the series: 1994 Harold the Helicopter 2018 Harold the Helicopter Thomas Wooden Railway Wiki lists this helicopter as a 2013 model. In one of the pictures below you will see a Mattel logo and the year 2012. I will go…
Sci Fi Movies - Gravity - 2013 3D printable model.
A friend of mine wanted me to make this for his 2013 Toyota Highlander, so this should work for similar highlanders and models in general. Printed in two pieces to help lock the USB port into place. I tried to make it parametric but I'm…
Brackets for additional switches Ford Transit ’06 (2006–2013) For single and double switches. Pictures show brackets compared to dummy plug.
I needed a mount for my Delock Thunderbolt SSD case on the back of my old iMac 21.5" The slot for the case is 22x81mm. No screws or additional hardware is required. Print instructions Category: Computer
SEAT Leon 5F FR Logos — Pre-Facelift (2012–2016) Custom 3D-printed FR badges designed specifically for the SEAT Leon 5F pre-facelift (2012–2016) . You will find two different model options depending on your printer setup: 🟥 For…
Carrie - Stopping the Car - 2013 3D printable model.
Condole divider for the MK6 GTI (2013). This allows to separate the center console change bin further out into 3 different sections. The dividers are removable to allow different size items to fit. Straight forward fit, won't have to…
Hansel and Gretel Witch Hunters - Hansel - 2013 3D printable model.
EN: This is a reduction for a peugeot 308 I (2007-2013) can or cup holder with the possibility to use it as a coin organizer. CS: Toto je redukce pro držák plechovky nebo kelímku do vozidla peugeot 308I (2007-2013) s možností využítí jako…
Definitely print this in PETG, on its side, and with supports. You want the layers to run all the way through the hook and vertical walls of the base. I used supports with minimal blocking (see picutres). You really don't need to clean…
I've designed a Trunk curtain retainer for KIA CEED SW (2006-2013) The original numbers are: for left 859371H600, for right 859381H600 This 3D Model was printed with ASA and ABS filaments. This is my third design in Printables, so please…
It is a remix from this one: https://www.thingiverse.com/thing:7100587 This is an adapter for the Hyundai i30 (2013) to retrofit the Philips Ultinon Pro6000 Boost H7-LED. The ring form the LED needs to be detached, that fit this one over…
I created this to fix my brittle cracking AC vent rings in my Mazda 6 2010. It should work for all Mazda 6 2nd gen cars and likely Mazda 3 2nd gen cars as well. I'd recommend printing in PETG or other higher temp plastics as PLA will melt…
Horror Movies - Oculus - 2013 3D printable model.
I made this design for a good friend of mine who really love Ford Mustang's. This was also my first design / adjustment openSCAD. YOU CAN MAKE YOUR OWN CUSTOM KEY-CHAIN... open this project in the customizer and fill in your name and you…
Struggled to a find a commercially available fascia to adapt a 2DIN Sony XAV-AX1000 to suit a Subaru Forester SJ 2013-2014 with the Harmon Kardon headunit. This one does fit these exact models, unsure if it would fit other models or…
I wanted a large tray for my center console to store things I needed. I found the one that came with the car too small and reaching in too difficult to find key things. Print with supports for the lip so that you get a good quality base.…
I'm slowly stepping into the world of Dualstrusion, this model is based on the great "Steak" model by Todd Blatt. Every year a I go camping with a group of friends for a weekend to celebrate "Best Friends Day". OK actually it's just an…
My Process: I draw a 2D profile in NanoCAD (Free NanoCAD 5 non 3D capability). I export the file as a DXF and upload it to Fusion 360 (Free Version, still learning how to use) where I extrude add chamfers, fillets creating a 3D File.…
If the measurements are off, let me know. I had two photos to go off of and used a nickel (21.21mm) for scale! :D
This is a remix (or rather a new design, just idea was remixed) for Mazda CX-5 2013 (initial model) coin tray. I had a version for EUR (1 and 2 EUR, photo on the floor) but after update, I've lost the stl file and only version 2 for EUR +…
Hansel and Gretel: Witch Hunters - Mina the White Witch - 2013 3D printable model.
Hansel and Gretel: Witch Hunters - Muriel The Grand Witch - 2013 3D printable model.
This was designed to go into the little cut out above the radio on Ram 1500s. Take out the rubber, remove the 2 screws and screw this model in its place. It is not recommended to print this in PLA as cars do get hot especially in the…
The Conjuring - Bathsheba - 2013 3D printable model.
Printed with 0.3mm quality. Support structure is needed. Speed 100mm/s. The model does work and fits perfectly. Remix of a design on thingeverse by LilHansel. I used a 6mm bolt to fit it to the latch in the car. It has been working…
MagSafe Magnet bought on AliExpress: https://de.aliexpress.com/item/1005007153207698.html?gatewayAdapt=glo2deu
Hansel and Gretel Witch Hunters - Tall Witch - 2013 3D printable model.
Nissan Pathfinder - Center Console Organizer Tray Great addition to Pathfinder: Pathfinder Armrest Storage Box is too deep and items in it are usually placed in disorder. This organizer tray can expand the capacity of Pathfinder armrest…
Print in PETG, 0.1mm layer height. Print with hole facing up. This is a replacement “cap” for the rubber end cap for a switch as part of Mazda part KDY0-46-040 (Switch Unit). This is a part found within Mazda 2013 and 2014 CX-5 and 2014…
Small clip to hang walkie talkie out of the small cubby hole to the right of the radio in a 2013 f150. UNTESTED Category: Parts
Replacement tray for the center console where the old school mobile phone fits. Removing the mobile phone adapter from the center console relieves quite a bit of extra space handy for storage. Recommend to print in PETG or ABS, my PLA…
Heated seat control knob (2013-2018 Toyota Avalon) In case you lost yours or destroyed it and don't buy replacement and then accidentally get the back seat knobs even though they say they're universal these are for the front seat only and…
The Conjuring - Lorraine (Vera Farmiga) & Ed (Patrick Wilson) Warren - 2013 3D printable model.
Detailed wallart of the famous S197 2012-2014 Ford Mustang (and GT), Easy to print . Of course you can scale it the size you want. I added a .3mf for a 2 part version with the length of 490mm. I recomend a strength of about 2-4mm. Add…
I designed a custom organizer for the center console of a 2013 Toyota RAV4 Platinum edition. The goal was to create a more functional space for everyday essentials while keeping everything neatly in place. The organizer features dedicated…
Needed a palce to put my macbook in the living room when im not using it, so I remixed the other bracket to make a low profile option. I put clear tape over the screw holes to protect against scratching Mirror the bracket in your print…
Designed this in 2016 as part of an attempt to move from Solidworks to Fusion 360 Its modelled off a few concept reference sketches released shortly after the movie was released
Insert for the somewhat useless square cup holder in a Toyota Prado 150 series. This version fits a large (36oz / 1065ml) Yeti bottle and a small tray (to hold fries on a road trip :-)) Also a cutout for a coffee cup handle. It covers the…
These are replacement mounting brackets for the rear bumper of 2010-2013 Mazda 3 cars. If you've ever been in a minor fender bender, the OEM mounting brackets are designed to shear to protect the frame. They are integrated into the bumper…
Small cup to fill hole in the dash. Print at a angle with tree supports so you get a clean front Added a taller version also
A simple Nexus 7 (2013) mount that you can fix with 2 M3x8 bolts and t-nuts. I use it to have a display for my Octoprint server with the Touch UI plugin. The mounting holes are on the right side with 1cm distance so it mounts flush to a…
Der Halter wird unter das obere (nur drauf gesteckte) Windschild montiert. Dazu das Windschild nach oben aus den Gummis ziehen und die 4 darunter liegenden Inbusschrauben entfernen. Darunter den gedruckten Halter, ggf. mit 15mm längeren…
Replace ventilation button of a Peugeot 308 year 2007-2013 but may fit more models 0.2 layer high 25%infill PETG
So, I took the original model, a small, 1:64 scale model of the NASCAR, and upsized it to be THE SIZE OF THE REAL THING!! 1:1 scale, model car. If you actually print this, beware that it is not split into pieces. It is one whole thing.…
This was specifically made for the bolt holes of a generic Android Auto Screen from Amazon but you could probably mount just about anything you like. It could probably be a little shorter, but I needed the extra distance for the back of…
I didn't like the look or price of any of the phone mounts available for this era of Forester so I made this. It clips onto the center HVAC duct and only blocks a little of each outlet. The install is permanent (since it seems impossible…
A mini trash can / rubbish bin for a Nissan Leaf AZE0 2013-2017 side door pocket. Useful for putting bits of rubbish and easily pulling out to empty. Printing : I recommend using concentric wall & infill pattern. Use supports for the flat…
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece.
Replaces the center console coin sorter with one that holds Loonies, Twonies, and quarters.
Just bought a cheap Mac Pro 6,1 and it came with a white IMac/Cinema display power cable which looked really out of place. Tried with just a standard IEC C13 power cord in black but still looked out of place as it didn't plug all the way…
Horror Movies - The Host - 2013 3D printable model.
Completely re-designed the model to have a more original look-a-like and an improved fit. On the photo you can see the printed cable guide on top and the original cable guide on bottom. Took this idea from GeestoPlastico's model. Though I…
Done for Marie, thanks to Seb for the first experience on 3D printing long before I had my own printer. May be printed face down, with no brim and no support. But if your first layer isn't perfectly fine-tuned, or depending on your plate…