Search results: 28

Sort order

5,107 models

P
PrintablesRNLDNKP

Radiator valve adapter M28 > M30 + Pin Extension

For my new Eurotronic Spirit smart radiator valves I needed a clean and easy adapter. There are many adapters out there that are quite bulky, couldn't figure out why that would be necessary... So designed my own in a few minutes. My…

Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant

Downloads
1,525
Likes
49
Rating
5
P
PrintablesDamir Perisa

NVME 2280 Storage Box (7x)

juggling around with nvme 2280 sticks, i needed one box for storage. here a first attempt for 7 cards. 4 clips hold it closed, easily openable, fits cards without squeezing them. since i have only cards without heat spreaders, i designed…

Print approx. €2.31–€2.82 excl. taxPreliminary estimate for one variant

Downloads
904
Likes
79
Rating
4.67
P
PrintablesGilles

Brush pot 28 slots (version with and without Ikea Skådis stand) - Pot pour pinceaux 28 slots (version avec et sans support Ikea Skådis)

[En] To make it easier to store my many brushes and save time finding the right one, I've created a pot to hold 28 miniature painting brushes. There's a model to put on a table and another to fix on the Ikea Skådis pegboard. I reused the…

Print approx. €8.80–€10.76 excl. taxPreliminary estimate for one variant

Downloads
366
Likes
45
Rating
5
P
Printablesblaxcan

Ventilation Cover / Grille 280 × 220 mm

This is a ventilation cover/grille designed for air inlets, outlets, ventilation openings or similar technical applications. The outer size is 280 × 220 mm . The model includes two frame-height variants: 8 mm and 12 mm . The lower mesh…

Print approx. €13.14–€16.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
362
Likes
218
Rating
0
P
Printablesjoanvdp

LED diffuser grid for ws2812b strips display

LED diffuser grid for ws2812b strips (60 leds/meter) display. I would recommend to print it 0.2 layer height, print the 3 first layers with white PLA then change filament to black. Pictures are from 4 8x8 grid glued together for a 256…

Print approx. €1.65–€2.02 excl. taxPreliminary estimate for one variant

Downloads
333
Likes
62
Rating
5
P
PrintablesBrent Wood

Piper Cherokee PA28 Aircraft Air Vent

Piper PA28 Aircraft all have 4 fresh air vents in the cockpit near the floor. They are very fragile vacuum formed plastic and easily damaged by peoples feet. I made the replacement parts in PETG. The two parts were redesigned slightly for…

Print approx. €1.49–€1.82 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
322
Likes
21
Rating
5
P
Printablesdennis0477

Felgenkappen, Radnabenemblem 50mm Alfa Romeo 145, 146, 147, 156, 166, Spider, GT, MiTo 60652886

Nabeldecken für viele Serienfelgen der Marke Alfa Romeo mit 50mm Durchmesser. Original Artikelnummer: 60652886 Die Embleme gibt es sehr günstig aus China wie z.B AliExpress oder andere Gedruckt in massiv PETG. PLA ging bei mir nicht, da…

Print approx. €3.67–€4.49 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
252
Likes
23
Rating
0
P
Printablesdradam

Rivian Tow Hook License plate bracket for OEM plate holder with note 2/28/25

Update 02/28/25. – A few people have had issues with this fitting their vehicle. It was designed to fit my Nov. 2023 R1S VIN 23 XXX. I don't know whether this is related to a change in the tow hook size by Rivian in later builds or a…

Print approx. €6.83–€8.34 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
206
Likes
17
Rating
5
P
Printableszuberio

12x5 WS2812 LED Array Cylinder Lamp Using Vase Mode Printing

Pictures are of V1 STL files. I've printed but still need to solder the V2 STLs based lamp. V2 lamp uses 5-12 LED strips placed horizontally on the lamp - significantly reduces the amount of soldering! As well, the button has been moved…

Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant

Downloads
199
Likes
56
Rating
0
P
PrintablespsychoD

Lego compatible 28x28 baseplate

Wanted to make some baseplates for my kids... used the scad model from https://www.thingiverse.com/thing:615256/files to get the size I wanted… Made the base a little thicker to stand up to the stresses of 2 toddlers(hopefully) Pieces fit…

Print approx. €11.10–€13.56 excl. taxPreliminary estimate for one variant

Downloads
161
Likes
16
Rating
0
P
PrintablesoXiVanisher

Magnet tops (32, 28 and 25 mm) for Redgrass painting handle

Magnetized tops for Redgrass painting handle with groves for 32, 28 and 25 mm bases. Requires 8x3mm magnets. Please be aware that the 28 mm bases are not held in grooves. There are also storage plates available to manage your minis during…

Print approx. €1.65–€2.01 excl. taxPreliminary estimate for one variant

Downloads
154
Likes
15
Rating
0
P

Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant

Downloads
152
Likes
10
Rating
4.5
P
Printables3DM-DeMeern

Ikea Samla Wall holder 28cm

The way you can store your filaments in the Ikea Samla boxes is great. But then you need an cupboard to place all your Samla boxes in. And I did not want that. So I created two holders that combined can hold a full Samla box. I have…

Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
128
Likes
41
Rating
4.67
P
PrintablesRadivoje Djokic

Power Bank Case for IP5328P_V1.0 – 1260110 3.7V 10000mAh Li-Po Battery (Glue-Fit)

This is a 3D printable glue-fit enclosure for building a custom power bank using the IP5328P_V1.0 module and a 1260110 high-capacity 3.7V 10000mAh Li-Po battery . The design ensures a precise internal fit while offering a compact, sleek,…

Print approx. €3.51–€4.29 excl. taxPreliminary estimate for one variant

Downloads
117
Likes
9
Rating
0
P
PrintablesAinon3Dtisk

Imitation of 5.7x28 cartridge for P90

Hello, Welcome to my profile, full of models and miniatures :-) I have for you Imitation of 5.7x28 cartridges for P90. The cartridges are made exactly according to the machine documentation, so they are fully authentic. I have 2 variants,…

Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant

Downloads
110
Likes
15
Rating
0
P
Printablesphiln

Watering Bottle Cap PCO28

I needed this to fertilize tiny seedlings without flushing them away. This should fit most EU bottles. All the other shower type caps I tried were leaking around the thread, or did not fit at all. If the holes don't print clean enough,…

Print approx. €0.43–€0.52 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
109
Likes
8
Rating
0
P
Printablesbassklampfe

Wall mountable housing for BME-280/SHT21 and similar sensors

This is a variation of https://www.printables.com/model/1202146-wall-mountable-housing-for-dht-22-sensor for smaller sensors without own housing. See attached pictures for assembling. Please remember to insert the cable into the housing…

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant

Downloads
80
Likes
9
Rating
0
P

Nistkasten für Meisen, 28mm Einflugloch

Nistkasten für Meisen mit abnehmbaren Deckel, Belüftungslöcher im Boden, Befestigung mit Draht oder Band am Baum, einfach um die Nippel außen wickeln, um den Baum, Pfosten etc. legen und an der anderen Seite befestigen. Deckel wird…

Print approx. €22.22–€27.16 excl. taxPreliminary estimate for one variant

Downloads
80
Likes
7
Rating
0
P
Printableszuberio

WS2812B RGB LEDs 12x5 Array Touch Lamp

This is my design for a 91mm tall by 84mm diameter hexagon patterned WS2812B RGB LED array, touch controlled, lamp. The LED array is 5 horizontal strips of 12 WS2812B RGB LEDs at 60 LEDs/m. I've used vase mode printing on the outer shell…

Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant

Downloads
78
Likes
20
Rating
0
P
PrintablesAlvomane

Hooks for 28/30mm pipes | Haken für 28/30mm Rohre

This is a hook that slides onto 28/30mm pipes. Simply scale it to fit other sizes or use the step file for customization Prints the hook in STL orientation with 4 outer layers, 5 top/bottom layers and 25% infill. — I would be very happy…

Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
70
Likes
8
Rating
0
P
PrintablesoXiVanisher

Magnetic base tags for 25, 28, 32 and 40 mm round bases.

Add a color change at the appropriate height to make the numbers more visible. Glue some washers or similar into the center to let the magnetized minis grab on. The numbers are meant to be placed on corresponding character sheets. The…

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant

Downloads
68
Likes
12
Rating
5
P
PrintablesKrakka10

Piper PA-28 GoPro mount under wing tie down

Adapter to mount the GoPro/Insta360 on the under wing tie down attachment of the Piper Pa-28. Double GoPro attachment, left side vertical and right side horizontal. I add a hole for the passage of a safety cable. To be printed on PETG,…

Print approx. €3.41–€4.16 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
64
Likes
4
Rating
0
P
PrintablesAnschuetz1991

Clip for BFT LED IP67 Stripe (WS2814)

I made a holder for my LED strips from BFT Lightning. In my case, it fits the 24V WS2814 RGBW LED strips with 60 LEDs/m and IP67. The LED tube sits fairly loosely in the holder, but it works well enough for my needs. The bar that holds…

Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
61
Likes
9
Rating
0
P
PrintablesRemco

TL-smoother case 50x28mm

A simple case for TL-smoothers with a board size of 50x28x8. there is a single version and a double version with some mounting holes

Print approx. €0.74–€0.90 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
58
Likes
4
Rating
0
P
PrintablesFoxy2sky

Gabarit Embase 28mm/37mm Hettich

Gabarit pour perçage des embases Hettich de 28mm et 37mm (LA32) . Référence des embases : LR 28 / LA 32 & / LR 37 / LA 32 Paramètre d'impression : Température d'impression : 240° Température du plateau : 100 Hauteur de la couche : 0.15…

Print approx. €1.91–€2.33 excl. taxPreliminary estimate for one variant

Downloads
58
Likes
3
Rating
0
P
Printablesplo73

Fast connector for WS2812 led strips without soldering

Practical and fast, it allows you to connect several strips together or create simple joints in curves or decorations, the only limit will be your imagination. For their use You will need: Led strips WS2812 1 x fast connector 1 x clip…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Downloads
56
Likes
14
Rating
0
P
PrintablesSchlumpf999

Joystick Gamepad Retro Arcade for PC (USB-C) and C64 / C128 / Amiga Projekt Joyweiler

Hello, this is a housing for the retro joystick project by Joyweiler for variant 5 with strip grid board and display. Many thanks for sharing the joyweiler project on gitlab and for allowing us to add a link to this project:…

Print approx. €3.15–€3.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
54
Likes
18
Rating
0
P
PrintablesR.R.

BMW 328

BMW 328

Print approx. €6.15–€7.52 excl. taxPreliminary estimate for one variant

Downloads
41
Likes
2
Rating
0
P
PrintablesLe John

Alienware/Dell 280W power supply holder

Outer dimensions : 113.3 x 34.75 x 53 mm Inner dimensions : 105.80 x 27.25 mm

Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant

Downloads
40
Likes
1
Rating
0
P
PrintablesR.R.

Ferrari 375 S N 0286AM Carrera Panamericana 1954

Ferrari, as usual, was represented by an excellent lineup of private cars. The fifth edition of the Carrera Panamericana was characterized by the duel between two Ferrari drivers: Umberto Maglioli driver of the “four-point-nine”, a 375…

Print approx. €7.92–€9.68 excl. taxPreliminary estimate for one variant

Downloads
35
Likes
0
Rating
0
P
PrintablesTomvH

Motor mount for a 28mm inrunner for Eclipson Spark

Motor mount for a 28mm inrunner for Eclipson Spark, exactly as it says. I tried a chinese 2838 3000kv motor in the plane so I made this to fit it.

Print approx. €1.48–€1.81 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
25
Likes
2
Rating
0
P
PrintablesPolypaul

4LR44 / 4SR44 to V28PX Battery Adapter (Pentax 67)

I wanted to resurrect my Pentax 67 that I bought on a trip to Japan but it's battery was depleted after a few years. Trying to order an original V28PX battery turned out to be quite difficult so I tried a few adapters on the internet but…

Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
23
Likes
5
Rating
0
P
PrintablesDaniel

PRINTER AMBIENT AND ENCLOSURE MONITORING STATION (ESP32 w/ BM280)

This is my ambient monitoring station box for my PRUSA MK4. The project is based on the Adafruit Feather ESP32 with BME sensor (P/N 5303) that will measure the outside ambient temperature, pressure and humidity. Inside the enclosure is…

Print approx. €0.24–€0.30 excl. taxPreliminary estimate for one variant

Downloads
21
Likes
3
Rating
0
P
Printablesmwx46

VW LT Beifahrersitz Halterung (Teilenummer 281881357)

Beifahrersitz Halterung (Teilenummer 281881357) für VW LT.

Print approx. €0.93–€1.13 excl. taxPreliminary estimate for one variant

Downloads
20
Likes
2
Rating
0
P
PrintablesTomino

Grain Mill Coupler Bosch 00628702

An example 3D printing can be useful also for mechanical parts manufacturing. Maybe someone find this model useful. My original coupler of Grain mill Bosch MUZ5GM1 has broken. It is made of some plastic material. So I decided to design a…

Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant

Downloads
16
Likes
0
Rating
0
P
PrintablesFAB 3D

IKEA LAMPLIG 50x28 SPACER

Spacer for IKEA LÄMPLIG 50x28. Print 4 pieces. Print in Pla or Petg Layer 0.2

Print approx. €3.74–€4.57 excl. taxPreliminary estimate for one variant

Downloads
15
Likes
4
Rating
0
P
PrintablesCap'n Corny

PTFE Holder for Filament Guide by @ByPS128

THE ORIGINAL FILAMENT GUIDE IS REQUIRED TO HOLD THIS IN PLACE!! A quick model I put together since I was starting to get annoyed with the extra tubes coming out of my S4 just lying around and getting tangled together. There's a version…

Print approx. €0.92–€1.12 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
14
Likes
4
Rating
0
P
PrintablesAdam

Replacement disc for Melissa and Doug Beginner Pattern Blocks (528)

Update [2023-10-20]—I have a model with a full set of replacement blocks, not just the disc: https://www.printables.com/model/620841-replacement-blocks-for-melissa-doug-beginner-patte This is a replacement disc for the Melissa and Doug…

Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant

Downloads
13
Likes
5
Rating
0
P
Printables_KaszpiR_

Big drybox clip (PANTRY 11L EAN 8694064003828)

About Clips to keep lid closed for drybox from PANTRY storage box 11L (EAN 8694064003828). Box has dimensions for 2 standard 7cm filament spools. Unfortunately the top edge is flat and it does not give edge to grasp the clip, so I had to…

Print approx. €0.66–€0.80 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
13
Likes
2
Rating
0

figura 28

pieza 28

Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant

Downloads
13
Likes
1
Rating
0
P
PrintablesMarius Beyer

Adjustable Clamp Mount for 28 mm USB Hand Fan (20–32 mm Pole Sizes)

This adjustable holder securely mounts a 28 mm handle USB hand fan to a pole or stand and lets you easily adjust the viewing angle. The mount consists of a two-piece clamp and a fan holder connected by a pivot joint. Available Clamp Sizes…

Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
5
Rating
0
P
PrintablesTDM465

modified LimeLite v28 mount box

If you use the Coral Accelerator with the LimeLite and you use this (or the original) bracket, see the back-mount Coral bracket here https://www.printables.com/model/908221-coral-accellerator-bracket-for-limelight-bracket

Print approx. €5.15–€6.30 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
1
Rating
0
P
Printablesmagarbl4

HP Z2 Mini G9 to DELL S2817Q Display Holder

Hier ist eine Halterung vom HP Z2 Mini G9 Workstation an DELL S2817Q Monitor. Hinweis: Die Dateien USB_Holder und Displayhalter sollte mit den Stützen gedrückt werden.

Print approx. €25.12–€30.70 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
10
Likes
1
Rating
0
P
PrintablesGrogg3D

Door Latch/Catch for Dishwasher (Quick Fix Edition for PN: 4055283925)

This was a design for our Zanussi ZDT 6252 dishwasher, the door latch/catch part number 4055283925, but the same part is used in many other compatible models, even from other brands. I've seen Electrolux and AEG just to mention two,…

Print approx. €0.31–€0.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
7
Likes
3
Rating
0
P
PrintablesBrite Minis

Hooded Stranger 28mm (No supports, FDM)

A hooded stranger, could be a cultist, monk, or just a cloaked traveler. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with…

Downloads
13,137
Likes
2,323
Rating
4.98
P
Printablesnzalog

2230/2242/2260 to 2280 m.2 adapter ssd

Please leave a like if you enjoyed the model or it helped you. :) Remixed from : https://www.thingiverse.com/thing:4715615 Started off by making it a bit easier to print by adding a slopes to some of the overhangs. Then ended up taking…

Downloads
7,985
Likes
332
Rating
4.95
P
PrintablesBrite Minis

Dwarf Paladin 28mm (supportless, FDM friendly)

A dwarf tank/paladin The detail featured on the shield is inspired by an architectural detail of an Art Nouveau villa in Lodz, Poland. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a…

Downloads
7,691
Likes
954
Rating
4.98
P
Printablessteffanders

PET bottle PCO28 1810 thread standard models

Thread Design This standardised thread is called PCO28 and is produced in two versions. PCO28 1810 - the original standard (point of this article) PCO28 1881 - the newer material-saving version with a shorter thread. My problem was that…

Downloads
6,297
Likes
668
Rating
4.94
P
PrintablesBrite Minis

Crusader knight 28mm (supportless, FDM friendly)

Ready to smack nonbelievers. This has a thin pointy sword - make sure your cooling is good or print 2 at a time. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer…

Downloads
5,936
Likes
695
Rating
4.98
P
PrintablesBrite Minis

Skeletons! 28mm (No supports needed)

3 support-free skeletons. All dead, just animated by evil magic. EDIT There is a modified version of halberdier with reinforced leg. Suitable for 28mm tabletop games. Created so that they do not need any supports and print well on a cheap…

Downloads
5,662
Likes
652
Rating
4.82
P
PrintablesMarius M

CASE ESP32 2432S028 USB-C Module - Cheap Yellow Display (CYD) / CYD2USB

Basic case for USB-C version of the ESP32 2432S028 2.8" module, also known as Cheap Yellow Display (CYD) / CYD2USB.

Downloads
4,969
Likes
272
Rating
4.91
P
PrintablesVogMan

Working 28mm Trebuchet – Fantasy Siege Engine (3D Printable)

Unleash medieval mayhem on the battlefield with this 28mm trebuchet sample. Test it before you trebuchet it! This is the Free Sample version of my functional 28mm trebuchet — a simplified, working model designed to let you try before you…

Downloads
4,861
Likes
2,378
Rating
4.46
P
PrintablesBrite Minis

Elf archer 28mm (no supports needed)

An elven archer. Could be a wood elf. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The…

Downloads
4,207
Likes
384
Rating
4.98
P
Printablesmeron

angels and bells - hangable Christmas ornaments - fast print (11-28 min)

Folding Christmas decorations inspired by paper cutouts from school years. Used PLA and PLA+ filaments. Printed on Original Prusa MINI+ with standard PLA preset without any problems. Manual filament change required after the second layer…

Downloads
3,645
Likes
766
Rating
4.93
P
PrintablesAlexY

Fully Printed 1:28 RC Car Chassis (MINI-Z compatible)

For the most up-to-date parts, visit the GitHub project page . Video: https://www.youtube.com/watch?v=_t0HLC2bZMU This is a 1/28 scale RC chassis designed to be compatible with Kyosho MINI-Z body shells. Current version fits 90mm (M)…

Downloads
3,321
Likes
746
Rating
5
P
PrintablesBrite Minis

Coronavirus Beholder 28mm (No supports, FDM friendly)

* NOTICE: I reuploaded the correct file - uploaded wrong file earlier that could cause slicing problems * Because it had to be done. The CoronaBeholder is a particularly nasty floating bag of eyeballs. Now, it can't transmit any diseases…

Downloads
3,292
Likes
436
Rating
4.94
P
PrintablesFreddyZ

Apple Watch S7 Macintosh 128k charging stand

Inspired by this 3D Print by user option8 in 2015. I didn't like the 2 part construction and it did not fit my watch so I decided to update the design. Being a single piece means it feels much heavier and more solid when handling. There's…

Downloads
3,170
Likes
460
Rating
4.77
P
PrintablesDusan Fajler

Bird Feeder for a bottle (48mm and 28mm threads)

There's a model for a 48mm thread (usually from European 5-6l bottles) and for a 28mm thread (ex. Coca Cola bottle). Using a 48mm thread is recommended because the seeds don't get stuck Poke a small hole in the center at the bottom of the…

Downloads
3,081
Likes
979
Rating
4.77
P
Printablesmdkendall

Enclosure for Sunton ESP32-2432S028R Cheap Yellow Display

This is an enclosure for the Sunton ESP32-2432S028R development board widely available from Ali Express, Banggood, Amazon, etc. The cost on Ali Express is only about $8 USD. The board includes an ESP32 WROOM-32 module and a 320 x 240 2.8"…

Downloads
3,069
Likes
220
Rating
4.77
P
PrintablesBrite Minis

Grim Reaper 28mm (supportless, FDM friendly)

He's coming... https://www.youtube.com/watch?v=-ea7oW4XXww Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and…

Downloads
2,909
Likes
338
Rating
4.92
P
PrintablesBrite Minis

Dragonborn 28mm (supportless, FDM friendly)

A dragonman Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis are available on my Patreon , Cults3D and MyMiniFactory . Let me know…

Downloads
2,657
Likes
355
Rating
4.88
P
Printablesdon frechdachs

Moon Lamp (LED Strip Mount WS2812B)

Hello there this a remix of the famous Moon Lamp for the use with WS2812B Led Strips and WLED (NodeMCU ESP 8266) to controll the LEDs. Moon Lamp Diameter approx.: 154 mm / 6 in Hole for the screwable LED Strip Mount approx.: 52mm / 2 in…

Downloads
2,640
Likes
498
Rating
5

Assorted Fallout Vehicles- 28mm (WIP)

Welcome wastelander to my humble collection of Fallout vehicles! All of these models are scaled to approximately 1:50 (28mm) for skirmish games; they should fit well AS IS for Fallout Wasteland Warfare, or adjust them as you see fit.…

Downloads
2,571
Likes
256
Rating
0
P
PrintablesTorua3D

Articulated Dragon 028 Valentine's Day - Print in place - No supports - 3mf - STL

HELLO I present to you the articulated dragon 028 - in its Valentine's Day version ideal for Valentine's Day decorations. By downloading this design you will have two files, one STL to print in a single color and another 3mf for…

Downloads
2,501
Likes
513
Rating
5
P
PrintablesBrite Minis

Orc with axe 28mm (supportless, FDM friendly)

Orc fighter with axe Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The other minis in the…

Downloads
2,420
Likes
217
Rating
4.96
P
PrintablesBrite Minis

Suit of armor 28mm (supportless, FDM-friendly)

A suit of armour on a stand. It could be magically alive, who knows. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. Includes variants with 20mm…

Downloads
2,230
Likes
272
Rating
5
P
PrintablesJSchell1309

Muzzle Thread Protector - Threaded 1/2-28 - Various Lengths, Diameters, and Designs

Here is a small collection of thread protectors threaded 1/2-28 in multiple diameters and lengths. No post processing necessary, if your printer is calibrated and tuned well then these should thread on like butter. If they are a tight fit…

Downloads
2,158
Likes
93
Rating
5
P
PrintablesBrite Minis

Female Elf Mage 28mm (No supports needed)

A female elf mage. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The female elven archer…

Downloads
2,128
Likes
213
Rating
5
P
PrintablesTeirale

(28) Druid - Female - No supports needed

All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…

Downloads
2,120
Likes
215
Rating
4.92
P
PrintablesBrite Minis

Goblin 2 with sabre 28mm (NO SUPPORTS)

Another Goblin with pointy sharp thingy and shield, in 28mm scale. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are versions with square and round bases. Let me know how…

Downloads
2,068
Likes
196
Rating
4.89
P
Printablesnetwalk

PET Flaschenöffner (PCO 28), adaptiv, bottle opener

Ein kleiner Helfer, um widerspenstige PET-Flaschen leicht öffnen zu können. Kompatibel zum verbreiteten PCO 28 Standard (Wasser, Cola, Limonade, Säfte). Die Verschlussaufnahme verläuft leicht konisch, so dass auch leicht abweichende…

Downloads
2,035
Likes
155
Rating
5
P
PrintablesBrite Minis

Yet another knight 28mm (supportless, FDM friendly)

Yet another knight on foot with a sword. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The…

Downloads
2,014
Likes
216
Rating
5
P
PrintablesRickeybobby13

40k Movement Tray Collection 25/28/32/40mm

I have modeled these movement trays to be simple, easy to print, and compact. There are options for 25, 28, 32mm, and 40mm bases in a few different shapes with 3, 5, and 10 model tray sizes. I been printing them at .32mm layer height…

Downloads
1,997
Likes
160
Rating
5
P
PrintablesBrite Minis

Knight with pig-faced helmet 28mm (FDM, no supports needed)

A knight in a bascinet, pig-face visor (hounskull/hundsgugel) helmet. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with…

Downloads
1,946
Likes
220
Rating
5
P
PrintablesBrite Minis

Goblin archer 28mm (No supports)

Goblin archer. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. Let me know how it printed for you in the comments! Support more…

Downloads
1,916
Likes
185
Rating
5
P
PrintablesBrite Minis

Goblin with sabre 28mm (NO SUPPORTS)

A Goblin with pointy sharp thingy and shield, in 28mm scale. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are versions with square and round bases. Let me know how it…

Downloads
1,912
Likes
168
Rating
5
P
PrintablesLeapTechOnline

Pipe Lagging Insulation - Template Jig - Cutter - 15mm 22mm 28mm

A set of simple tried and tested pipe insulation cutting templates. I was sick of doing it by eye and then noticed people selling similar online but they were either overpriced or a bit "janky". I spent a fair bit of time sorting these…

Downloads
1,871
Likes
642
Rating
5
P
PrintablesLWC

PVS 420 thermal vision 50Hz low budget 18650 monocular (256X192, 384X288, 640X512)

UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…

Downloads
1,844
Likes
1,231
Rating
5
P
PrintablesBrite Minis

Frogfolk spearman 28mm (Supportless, FDM-friendly)

A frogman. Somebody forgot to drain the swamp and now it strikes back with pointy sticks. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE…

Downloads
1,828
Likes
224
Rating
4.92
P
PrintablesMichał

ESP32 Cheap Yellow Display (USB-C version) Enclosure (ESP32-2432S028R)

Remix of the enclosure designed by @mdkendall for the ESP32 Cheap Yellow Display (ESP32-2432S028R) found on Aliexpress & similar sites. Model adjusted for the USB-C board version, which does have slight variations of the connector…

Downloads
1,773
Likes
128
Rating
4.95
P

IKEA BLALIDEN / BLÅLIDEN Shelf Bracket Adapter for Glass Cabinet Repair Part 10087158 / 10082805

You don't have a 3D printer but you need it? Buy on Etsy with Worldwide shipping → buy here __________________________________________________________________________________ IKEA spare part number 10087158 / 10082805 Fits only IKEA…

Downloads
1,716
Likes
64
Rating
4.67
P
PrintablesBrite Minis

Cleric 28mm (supportless, FDM friendly)

A human cleric with mace Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The old wizard seen…

Downloads
1,706
Likes
188
Rating
5
P
PrintablesBrody

Bambu Lab P1 X1 Dual Aux Fan / Bentobox 7/28 Updated

Bambu Lab P1 / X1 Series Modular Bentobox Aux Fan (4/10/2023) Designed a modular second aux fan / bentobox for Bambu Lab printers. Assuming a lot of people will upgrade their P1P to the P1S, they will most likely have 2 aux fans now and…

Downloads
1,691
Likes
569
Rating
4.94
P
PrintablesTheRooster

Dead Skeletons - 28/32mm Scatter

Various dead skeletons. These are meant to be used as scatter terrain. 28/32mm scale. Did these people die like this? Is there a story behind each skeleton? Or is some twisted freak posing the bones for fun? I guess that's up to you!…

Downloads
1,689
Likes
240
Rating
5
P
PrintablesBrite Minis

Ghost 28mm (Supportless, FDM friendly)

A ghost. Or maybe just some laundry on a windy day, who knows? Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis seen in one of the…

Downloads
1,637
Likes
204
Rating
4.92
P
PrintablesBrite Minis

Skeleton Archer 28mm (no supports needed)

A skeleton archer. Not sure how these can hit anything without eyeballs, oh well. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are…

Downloads
1,606
Likes
159
Rating
5
P
PrintablesBrite Minis

Samurai in armor 28mm (no supports needed)

An ancient Japanese warrior in armor. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The…

Downloads
1,600
Likes
202
Rating
5
P
PrintablesMatt Wilde

Case for Sunton ESP32-2432S028 2.8" TFT-Touch Board

This is a small protective case for the following Sunton board: ESP32-2432S028 Note: You'll need 2x M3*4 bolts to attach the PCB to the casing. If you are looking for additional electronics projects, checkout the following page:…

Downloads
1,577
Likes
96
Rating
5
P
PrintablesBrite Minis

Sheep 28mm (supportless, FDM friendly)

Baaah. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE Other models seen in the images are available on my Patreon . Let me know how it…

Downloads
1,569
Likes
180
Rating
5
P
PrintablesBrite Minis

Bugbear 28mm (supportless, FDM friendly)

Supportless Bugbear with a club/mace. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The…

Downloads
1,553
Likes
160
Rating
5
P
Printablestytyk

Rohs Step Motor 28BYJ-48 5V DC

Model for use in checking fit, as accurate as it could be using only a mm transparent flat ruler STEP, STL and IPT included Wires extruded 8mm to do fit without bending but are flexible enough to be maybe 2mm clearance on the real model…

Downloads
1,541
Likes
27
Rating
5
P
PrintablesBrite Minis

Ogre - 28mm (FDM no suports needed)

A taunting Ogre on a 1inch base. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The other…

Downloads
1,504
Likes
147
Rating
4.91
P
PrintablesBrite Minis

Hobgoblin spearman 28mm (No supports needed)

A hobgoblin or any other big goblinoid with a pole weapon. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and…

Downloads
1,486
Likes
162
Rating
5
P
PrintablesBrite Minis

Samurai 28mm (no supports needed)

A miniature resembling an ancient Japanese warrior. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round…

Downloads
1,463
Likes
204
Rating
5

PCO-28 (German PET Coke Bottle) Thread profile for Fusion360 - Gewinde für PET Mehrweg Cola Flaschen

Fusion360 custom thread profile for soft drinks bottles (PCO-28 spec). Unzip to \Users\ {USERNAME} \AppData\Local\Autodesk\webdeploy\production\ {NEWEST FOLDER} \Fusion\Server\Fusion\Configuration\ThreadData Note: You'll need to change…

Downloads
1,462
Likes
52
Rating
5
P
PrintablesBrite Minis

Townsfolk zombie 28mm (supportless, FDM friendly)

A townsfolke zombie. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE Other zombies seen in…

Downloads
1,455
Likes
139
Rating
5
P
PrintablesVogMan

28mm Medieval Fantasy House – Easy 3D Print (Free Version)

Build your own medieval fantasy village - one house at a time! This 28mm scale house is perfect for tabletop RPGs, wargames, dioramas, or fantasy display builds. 🏡 Support-free design - prints easily . 🎲 Sized for Dungeons & Dragons,…

Downloads
1,452
Likes
208
Rating
5
P
PrintablesCode2

Medieval Stone Wall 28mm Scale - 10x10cm

This is a simple Stone Wall in 28mm scale that you can print without supports. Dimensions are 10x10x1 cm If you enjoy my content, please consider supporting what I do: Find more STLs on: Thank you, Code2. :)

Downloads
1,451
Likes
152
Rating
5
P

Road bike stand (28-40mm)

Road bike stand. The stand is foldable. Wheel width 28 to 40mm. Print settings: PLA 0,2 layer 4 perimeters 4/4 top/bottom layers 15% infill

Downloads
1,439
Likes
212
Rating
4.63
P
PrintablesBrite Minis

Nothic 28mm (Supportless, FDM-friendly)

A nothic. One-eyed fella with spikes. Created in Virtual Reality in Adobe Medium. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE the…

Downloads
1,427
Likes
120
Rating
5