Carpuride GPS holder for KTM 1290 super adventure
3D printed Carpuride GPS holder, with holes for screws and nuts. Steel head bolts 6 hexagonal internal Ø5 x L.20 mm
- Downloads
- 141
- Likes
- 5
- Rating
- 0
187 models
3D printed Carpuride GPS holder, with holes for screws and nuts. Steel head bolts 6 hexagonal internal Ø5 x L.20 mm
Schlüsselanhänger KTM Duke 1290.
Aesthetic front wheel slider KTM 1290 SDR. Can be used with 2 m6x60 bolts and washers, or a m10 rod with washers and nuts. (See drawing) Print the Slider cap 2 times and use a color change if you like. Be aware that it's designed to look…
Simple case for a Vision Master E290 that fits a 3000mAh and the new variation of the buttons which are now on the back, folding antenna that allows all possible positions. There's space to add a gps and buzzer but I'm still working on…
Customized version of https://www.thingiverse.com/thing:881114 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=881114 Instructions Using the following options: link_size = 12 platform_width = 400…
For years now I've had a ratty nail going through the magnet to hold my Hue motion sensors in the corner. It not only looks janky, it doesn't stay put very well. Then, I got a 3D printer. i checked out a few models online, but I didn't…
This model is compatible with the lego system.
This model is compatible with the lego system.
Protects your pedal cable, preventing it from being crushed against the wall when breaking. Essential modification for those who don't have a cockpit.
A slip case for Heltec Visionmaster E290: Easy to print, comes with several variations: Slim and fat designs. The slim design has 6mm clearance between the top of the LoRa transceiver module and the case back The fat design has 23mm…
This model is compatible with the lego system.
This is still a work in progress **If you have the buttons that look like this, this case will not work for you. Heltec changed the way the buttons work and this case is made for the old buttons on the side. ** Simple case for a Vision…
This protective cap is designed for 1K 290 ml Euro cartridges , helping to keep the cartridge sealed, clean, and ready for reuse . It protects the opening from dust, dirt, and drying residue when the cartridge is not in use. Simple,…
This model is compatible with the lego system.
This model is compatible with the lego system.
This is still a WIP, CAD will be released when it's more complete. Bom is also a WIP, you'll basically need everything from the original, and a 34mmOD, 31mm ID, 1.5mm H gasket use 1mm foam tape to seal around the fan exhaust and the…
I searched far and wide for a replacement throat plate or a 3D model of a throat plate for Ridgid Saw MS1290LZA, to no avail. The model was discontinued. The old plates became brittle and broke apart. This design is much stronger and more…
Print in flexible material or make negative for mold and cast from silicone. This part is quite easy to loose as it sits on top of condenser water container if connected to outside drain, but needs to be placed back into place for…
I designed GP wings for the KTM SuperDuke 1290R 2021. Very easy installation: I recommend printing from PA12 or PC Blend Carbon Fiber
Fully adjustable Webcam C290 mount for FLSUN V400. Use PETG to print: 0.2 layarheight, 15% gyroid infill, 5 walls. Use a couple of M3 bolts and nuts to build.
a mini Whelen 2801 Omni directional siren Print Settings Printer Brand: Creality Printer: Ender 3 Pro Supports: Yes Resolution: any Infill: i used 10 gyroid Notes: you can print it as one piece with a really annoying support removal or…
This is a protecting case/cover for the Samsung "Frame" TV remote control called BN59-01290A (check inside the battery cover for your model). It is printed in TPU on stock Creality Ender 3 with support. The back of the case is a bit too…
A simple 1 7/8" Vacuum Attachment. Print with the angled top down for best results and less supports. Works with most 5-10hp Shop Vacuums such as Heart, Dewalt, Shopvac, Rigid, Kobalt, and Craftsman. If you would like this file with a…
A dimensionally accurate model of this board; all connectors, LED's, buttons and major protruding components modelled. Created for and used in designing this case .
I already had several H+S airbrushes, and really like PiotrK's design for a stand. As I'm not brilliant with importing and editing other models I decided to design this from the ground up based on the mentioned design. Hope some of you…
Heltec Vision e290 Enclosure with Room for Components This enclosure is for the Heltec Vision e290 . E-Paper display is nicely framed and fully visible Room for a realtime clock and GPS Fits a 4000 mAh or smaller LiPo Space for external…
This is frame plug for KTM Superduke 1290 R 2017 with airtag holder. I recommend print in TPU.
Showcase automotive artistry with this 3D printable STL model of the stunning Alfa Romeo 8C 2900 Spider. Revered as one of the most beautiful cars ever made, its flowing lines and powerful legacy make it a prized addition for classic car…
In my case, when mounting this I found the original KTM display screws too short and so replaced them with some M5 x 12mm Socket Flanged Button Screws (ISO 738002) Stainless Steel (A2) from Accu, along with some 5.3mm x 10mm x 1mm Flat…
This model is compatible with the lego system.
Print in TPU. Add Button 16mm.
The oddly-shaped throat plate insert for Craftsman Miter Saw #137.212290 wasn't too hard to recreate, which is great, since it's been discontinued and no longer available anywhere. Original part # is 2BK8. Original part is…
it looks very good for my 1st big print with out ant setting i print this as it is with prusaSlicer 2.2.0 si i have to cut the base down so my mine can print :-)
This model is compatible with the lego system.
I didn't like how shallow the official handle is, the grip on it felt very cramped and uncomfortable. This design moves the hand lot further back, and straightening your index finger. In a sense, it holds lot more like a pistol now. It's…
A wall mount holder for a Solum ST-GR29000 ESL. Could be secured with one or more screws or tape. I use OpenEPaperLink to provide my displays with content. Print instructions Printed Parts 1x Print in PLA or PETG with support on the…
Link for the Dremel Tool: https://amzn.to/3GbdVPo Print in PLA 0.2/0.3mm layer height No support needed https://youtube.com/shorts/n9ohBZI8dFM
Hand grip for GSI creos mr hobby airbrushes with Tigger Type Double Action I have the model PS-275 but this will work in almost all models of GSI creos trigger type. Original from https://makerworld.com/en/models/486164#profileId-398839
Flash Adapter for SoluM ST-GR2900N / GR29000 ePaper Tags See the writeup on my Blog.
0,15mm 0,4mm support yes
I was looking for a phone holder for ktm super adventure 1290 and i found ram mounts X-grip but no nice way to mount it on the bike so i design this one. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts:…
Danke an Yanev, er ist ein Profi in Fusion 360 / Thanks to Yanev, he is professional in Fusion 360. Material: PLA+ Druckereinstellung: Layerhöhe 0,2 mm / Infill 10 % / No Support Zusätzliches Material / additional material: 6x M4x35mm…
1290 Super Duke GT Sidebags Wall Holder
LEGO PART 92290 Weapon Trident
No Supports needed! Endcap at one side for better print bed adhesion! My printer settings: -Material: PLA -Infill: 40% -FirstLayer Speed 25mm/s -FirstLayerFlow: 200% -adhesion: Brim
Yamaha 2901 golfcart spare key. Works . Print so layer lines run the length of the key to avoid breaking off. 16 minute print @ 0.12 Use tree supports flat on bed. 2/26 3:00 PM - Updated - Original was cleaned up a bit.
PLA works just fine
Update June 2025: 100 degrees Fahrenheit today, and the spring snap of the current version is no longer providing retention with the clip when printed in PETG. Update July 2025: ABS printed clip is holding up to 100 degree temp so far.…
This print fits the Yaesu FT-2900r using the factory screws. It may also fit the FT-2980. I printed this with a Prusa MK3S+ with a 10% infill and with with a brim (short end of model down to print without supports). Designed with FreeCAD.…
This is frame plug for KTM Superduke 1290 R GEN 3.0. I recommend print in PETG. You will also need a 3 pieces 22 x 2 mm O-ring for a perfect fit.
This model is compatible with the lego system.
This is frame plug for KTM Superduke 1290 R GEN 3.0. I recommend print in PETG. You will also need a 3 pieces O-ring 22 x 2 m for perfect fit.
This is for testing Fiberon PETG-ESD filament, specified at 250-290C nozzle temperature. If using the STL, you will need to modify the gcode to manually set the temperature changes. The provided gcode is for a Core One Plus, using…
Wheel Hub for use with a LEGO #2902 rubber Motorcycle Wheel. Use in place of LEGO #2903. This wheel hub was designed for use by FTC Team #13599 and is compatible with Tetrix hubs. OpenSCAD file is included for further remixing. Enjoy!…
My pipe got broken and dyson didn't have stock for replacement, so i made mine. i printed with MK3S, PLA, 100% infill, 0.1mm, organic support
I needed some extra luggage on a trip a while back and made this mount to attach my Kriega bag to the luggage rack of my KTM 1290 SAS. Printed at 100% infill with Jet Black Prusament PETG to avoid any nasty surprises while going down a…
Mount is held on with zip ties and uses 4 M3x16 bolts.
Hello Friends! Here is a system to replace the classical adapter of the Mannfrotto light 290 Tripod original one in order to be able to directly snap on you camera with a Capture Plate (from Peak Design) mounted on. Here is a video on how…
A Heart shaped pencil/pen vase to keep a tea light in or your favorite pens and pencils, or anything else, in. It has heart shapes all the way around it from top to bottom. It is 100mm tall and 110mm for the x and y axis. The photo shows…
https://www.tiktok.com/@3dprinttutorials/video/7340187495746833696 https://www.tiktok.com/@3dprinttutorials/video/7340187495746833696
Dies ist der Knopf für die Heizungs- und Lüftungssteuerung in einem Fiat Ducato 290 BJ 1994. Insgesamt braucht ihr drei davon. Print Settings Printer Brand: Creality Printer: Ender-3 S1 Plus Rafts: No Supports: No Resolution: 0.2 Infill:…
Adapterplatte zum Anbringen verschiedenster Taschen mit Mollesystem. Vornehmlich gedacht um Warnwesten und Verbandkasten griffbereit zu haben und eine kleine mobile Werkzeugtasche (oben) mit Klettverschluss mitzuführen. Gedruckt aus PLA+…
This is a re-created version of KTM/Husqvarna "Marking Mandrel" Pt.# 78129032000 intended for timing the balancer shaft when re-installing the side case on a KTM 450/500 or Husqvarna 450/501. Here's a YouTube video explaining the process:…
Custom request for @NLmasteross_3524273 Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license: Patreon Portfolio at https://marjers.com/ Tools I use: Acrylic paint pens…
3D Scan of a Milwaukee Drill 2902-20
Custom-designed screw and frame covers for the KTM 1290 Super Duke, optimized for 3D printing. Adds a clean, finished look while protecting exposed hardware. The set will be continuously expanded with additional covers and plugs that I…
Thanks to the inserts made by brsc2909 for the Aldi Workzone / Allit Basic 33 / Jaycar 33 parts drawer, I remixed it to have 2x 12 sections for small screws. Since everybody needs different box sizes, I added the Fusion 360 and STEP Files…
Náhradní nožky pro M1T290 / Replacement M1T 290 feet Tiskové parametry / Print paramers: Podpory / Supports: Pouze na podložce / Heatbed only Výplň / Infill: 30%
>Emergency Compound microscope, made from two lenses of two red laser pointers each under 1-2$ price. >See attached PDF for full theory and making assistance. >An aluminium tube and aluminium foil reflects the camera flash to the…
This hinge ist for the AEG Parts numbers : 2231129012 2231128014 Left and Right are identical I was very fried and really pissed off at AEG for their crap quality this hinge broke after 3 months of use and even after two new free hinges…
Karambit ring I made for fake BM290. Might fit on legit benchmade. I printed it in ASA and it seems sturdy enough for this small knife.
For use for Master Airbrush Universal Clamp-on Holder: https://www.amazon.com/gp/product/B001BR6CO4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 For use for Mr Hobby Procon Boy PS-290
KTM 1290 Super Adventure R (SADV-R) front radar sensor (not installed on R version) hole delete
🔩 Improved Lid for Intex 29041 Floating Dispenser 💦 Did the original lid break or go missing? Here’s your fix! 🛠 I designed this replacement for the Intex 29041 chlorine floater after the clips on the original wore out – this one's been…
Some mounting hardware if you want to hang this tablet PC on the wall to use as a smart home dashboard for example. Two stl's for the bottom and top parts. The third file has an opening for the volume button so that it's not continuously…
easy 1 layer adhesion test fo the creality k2 pro. The dimensions should be a little bit smaller than the plate.
Alfa Romeo 8C 2900 is a detailed scale car model stl and 3d printable model for diorama and display featuring the classic Alfa Romeo 8C 2900 (civilian vehicle). Use it for desk and shelf display, model car collectors, automotive-themed…
whelen 2909 siren use glue to put parts together
Made it in two pieces because i didnt have a multi colour 3D printer.
Turn your Solum 2.9″ ST‑GR29000 Electronic Shelf Label into a unique, reusable eInk name tag or conference badge ! This simple 3D‑printed mount securely holds the ESL and adds an attachment point for a standard lanyard, making it ideal…
Wanted a cheap, simple solution for a tripod spreader. We use a Manfrotto 290 Xtra at work for a Matterport camera and were having issues with keeping the legs spread out when needing to constantly move the camera. I tried to keep the…
Lathe spider for PM-1130V / WBL290F Allows to turn smaller diameter materials since it hols them at two different places.
G29/G290 Center Peace with Toyota logo No Glue
Side stand extender for the KTM Super Adventure R 2021+ (other models not tested) Several model files are available for single and multi material printing, depending on the type of fasteners and if they are printed with or without any…
The displays from Ambient Weather have a keyhole mount, but those holes do not align with the 40mm IKEA SKADIS pegboards. This small adapter will accept two M3 screws and had hooks that neatly fit into the pegboard. This was designed for…
If you've added a side stand sensor bypass but have still left the original side stand switch attached, here is a cover for the plug so it doesn't fill with mud. Fits: US Model 2017-2024 Husqvarna 701 - Enduro & SMC & Vitpilen EU Model…
Three drop-in debris filters for the windscreen scuttle drains on X290-era Fiat Ducato, Citroen Relay and Peugeot Boxer vans and motorhomes. These sit in the top of each drain and catch the crud where you can see it. Pull one out by the…
I took the clip from thing:4636337, extended the arm so the camera will look down on the print bed and used the original arm and extender from thing:627395 Clipping it onto your 2020 frame may require some brute force but you could just…
Hello everybody, I was working on my KTM LC8 clutch and i needed a tool. Designed it from one of the clutch plates and the outer clutch hub. I think it needs to be printed in strong material, because the forces are great to losen the…
Simply screw in the same as the original center cap. The logo is one layer above so you don't need AMS.
This is a case to store the ASI290MC imaging camera with the 1.25" nose-piece attached and the USB3.0 cable winded up neatly. I've it case so I won't have to unscrew the nose piece every time I want to put the camera into the box it came…
I created this simple little part to see if raising the spoiler/visor on the Puig Touring Screen would make my bike any quieter at speed. The specific screen is here (M&P site, Puig direct somehow never lists this one), although I imagine…
Vial remover that fits under the Agilent rack to push up your vials so you can easily remove them - especially handy for those tight corners! Special thanks to PS and JLC for the inspiration Print Settings Printer Brand: Prusa Printer: I3…
Made an adaptor for flat top mounting an ambient weather station ws-2902 onto poles or 4x4 posts. Mounts with 1 long lag of about 7-8 inches, and 1 fender washer. Mount this to the top of the wood pole or post and then install the weather…
Gridfinity tray for the wera screwdriver handle 80 product nr: 002900
Lego Compatible. First I designed the first version. Now I got here the second fixed version so print the fixed version.
A quick and dirty mount for an Asus AC2900 router to fit behind your TV using the VESA mounting points. You will need: M3 x 30 mm screws - minimum 4 off M6 x 25 mm screws - minimum 1 off Customise: The model has not been made easy to edit…
This is a riser for the leveling foot on a 30" Frigidaire free standing range/stove to gain additional height. There are models for 4 heights 5/10/15/20mm. Print with 4 or more walls and 15-20% honeycomb infill for compressive strength.…
Viele ähnliche Wagen wurden Anfang der 1920er Jahre von der Südharz-Eisenbahn (SHE) und der Gera-Meuselwitz-Wuitzer Eisenbahn (GMWE) beschafft. Dieser Wagen war bei der SHE bis zum Ende des Zweiten Weltkriegs und später im östlichen…
Works great on my line trimmer. Original snapped and i couldnt get parts so whipped this up real quick. Its a bit chunky without the sexy curves but it works and that all i needed.