Lego Compatible (3001.dat) Brick 2 x 4
This model is compatible with the lego system.
- Downloads
- 1,158
- Likes
- 50
- Rating
- 4.63
Counting matching models…
This model is compatible with the lego system.
I'd recommend you print this with a skirt or brim with at least a 8-10% infill and supports that touch the bed only.
Carro para la sapphire plus, con ventiladores 4020 , se apoya sobre la chapa original dela maquina, gana mas de 8 mm de alturaa tambien. ** Añadidas nuevas toberas optimizadas, levantadas para que no rozen, y mejora del entrante , aumento…
Upgrade your Excavator with a power Hammer! I wanted to not simply have one fixed part, it should move! Spring is a bit stiff but does the job. Printed in PETG so the spring gets its springiness ;) but PLA should owrk as well. Print the…
A replacement nail for Hape's children's toolbox E3001 / IKEA's BLOMFLUGA. Print with 0.2mm layers and 5(!) walls. The upper part should only consist of walls, no infill. The nail head can be printed with a standard 20% infill.
This is 1:1 replica of original Lego brick. It have just same function as a original 2x4 lego brick with number 3001. Check me on YouTube: https://www.youtube.com/channel/UCkqbUzyZ5GKdea3Zdf6kEnA?app=desktop
Update: This was my first self designed part and it is still in pretty good shape and works very well after nearly two years in service! With the red bracket broken, that holds the arm of the excavator in an upright position, fun was…
Honestly, I haven't even sawn thru my original end blocks yet. I just read about folks who were looking for replacements, so I wanted to try drawing these up. Then I found that someone on Thingiverse had already done it. Oh well - I think…
Modelos compatibles con sets legos
carro para la sapphire plus con ventiladores potentes de 5015 ,
Carro funcional para la two sapphire plus , se une a la chapa de serie, y mejora la altura de la maquina en mas de 8 mm , ademasd e conseguir una buena refrigeracion , modelo para v6, mosquito y otros , toberas modificadas . embellecedor…
So you finally grabbed one of these sweet Chinon point-n-shoots, but you used it a little too hard and the faceplate fell off? Maybe you just decided that it would be cool to personalize your new image maker, to make it a bit more special…
Let me know if I have to change anything.
This mount was designed to secure a Wix 33001 fuel filter to keep it from hanging by the fuel line. It is intended to mount to a 1x2 frame rail with zip ties. Use some old tire tube to keep it in place. Secure the mount with small ties…
The R-30017 Aikion blaster is a type of blaster pistol available during the Cold War between the Galactic Republic and the Sith Empire and can be found in Star Wars: The Old Republic. Real size measures 460 mm long Very easy to print and…
This mod will increase the maximum temperature of a filadryer to around 70c allowing you to dry filaments like PETG and ABS more effectively I made this model over a year ago so there won't be great instructions Bill Of Materials Name…
Somehow the center piece of my bump head disappeared. I used two pictures I found to make a working version. Basic standard settings for printing. About a 45-minute print.
3001 (2x4 brick compatible) Lego piece about 3 grams
This is a recreation of the bottom bed roller (not side rail roller) of Apache Campers made 1973 - 1986. Made it based on dimensions taken from a “new” bed roller. For best results I would print this out of a durable material, PETG,…
The door spring on our dishwasher snapped which then broke the plastic roller. I was able to source a replacement spring, however unfortunately, the roller for a door spring has been discontinued with no replacement (part number:…
Optimized box for multimeter RETLUX RDM 3001 Inner dimension of the box (only for multimeter) 77,35x145,20x36mm (width length height) Printed with 2 walls and 10% infill (150g of filament for entire case) For assembly u will need 6x…
When reassembling my Whirlpool Atlantis dryer, I discovered that the hinge covers were cracked. I looked at buying new ones, but apparently Whirlpool is very proud of these things, and I didn't want to spend that kind of money or wait.…
Halterung für Heidolph EKT 3001 Fernsteuerung - 3.OG OC 12mm / 13mm = Klemmöffnung Klemmung funktioniert sehr gut!
Cover for the Kohler Layne Toilet Seat quick release. I printed in PLA with 6 walls and 25% infill making it almost completely solid. I used arachne wall generator to get 3 walls in the compliant clip, organic thin supports, and the Orca…
A replacement foot pedal for the Hoover Windtunnel vacuum. You'll need the metal plate from the original one. Foot pedal assembly Hoover WindTunnel UH70120 Hoover T2 304233001 You'll likely want to print this upside down. Tested on Oct…
Use supports for the base. Print and glue together.
Lego Compatible 2x4 3001 Brick
A case to hold a Tile Mate T3001 tracker together once you split it apart to replace the battery. Simply insert a blade in the seam, pushing gently towards the front. Your blade should slip in about 1mm, try not to insert it further.…
This is a rebuild of the Secumar automatic to manual clip to lock the trigger when the automatic trigger pill is removed. When printed in PETG its about as strong as the orignal and only needs a brightly colored marker to externally…
Overview This is a functional replacement for the factory plastic seat mounting bracket/insert used on 1990s BMW Paralever Airhead roadsters. Over decades of heat cycles and vibration, the original BMW nylon inserts become brittle and…
Carro para la sapphire plus, con ventiladores 4020 , se apoya sobre la chapa original dela maquina, gana mas de 8 mm de alturaa tambien. ** Añadidas nuevas toberas optimizadas, levantadas para que no rozen, y mejora del entrante , aumento…