Search results: 360

Sort order

2,756 models

P
Printables3Dprintfun

Xbox 360 Controller Wheel

The wheel can make one of the joysticks not move all of the way, so if your game supports it you might want to change the controls. You will need a 608 bearing for the wheel. If you are going to print one I recommend the one by zimo .…

Print approx. €1.39–€1.70 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
709
Likes
135
Rating
4.33
P
Printablesgoldsquadron

Thermaltake Core P3 360mm Radiator/Fan Mount

A mount that can hold 360 to 120mm radiators or fans. I needed a mount that could support a 240mm radiator for my GPU and could only find models for 360mm. For 360mm radiators just screw in place and then slide onto the poles of the case.…

Print approx. €3.05–€3.73 excl. taxPreliminary estimate for one variant

Downloads
685
Likes
31
Rating
4.5
P
PrintablesAsa

Cable Management Pack - Fusion360 Files Included (zip tie anchor, cable clip, etc)

Use #17 or #18 sizes nails for the cable arches Use #4 screws for the cable clamp and large cable clip For the ziptie anchor I recommend double sided adhesive foam (affiliate link): https://amzn.to/3w16Kq6 You may need to use a glue stick…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant

Downloads
436
Likes
167
Rating
5
P
Printableszuberio

1S2P 18650 Vase Mode Holder With TP4056 & MT3608 Boards Slot

This is a vase mode print I designed to hold 2 18650 cells as well as a TP4056 charge/protection circuit & MT3608 DC-DC boost circuit. Here's the link to where I bought the circuits from. https://a.aliexpress.com/_mNJGjrV 0.2mm layer…

Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant

Downloads
359
Likes
86
Rating
0
P
PrintablesNozzle

Cableclip Kabelclip z. B. Festool 10mm Kabel mit Fusion360 Modell

I was annoyed that my Festool vacuum cleaner has no clip for the cable. So I designed this cable holder in Fusion360 and printed it on my MK3S+. I use PETG for it and 30% infill.

Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
325
Likes
62
Rating
5

Wheel parametric (F360)

This is the result of the “3D Modeling in Fusion 360” course from Prusa Academy. I had previously written the wheel in openscad, which you can find here: OpenScad Wheel The uploaded files are made for my Wolf A4600 Lawnmower. This one is…

Print approx. €1.36–€1.67 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
293
Likes
54
Rating
5
P
Printablesrangerer

Embroidery Hoop (F360 Parameterized)

This is a standard embroidery hoop that uses M3 fittings for the tightening mechanism. The default size has an inner hoop diameter of 80mm and a mesh file is included for that size. Please note that this model should be sliced with pauses…

Print approx. €2.07–€2.53 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
253
Likes
55
Rating
4.67
P
PrintablesLogan

Vier Gewinnt 360°

Ein 360° Vier Gewinnt Spiel Für 2 bis 4 Mitspieler

Print approx. €2.38–€2.90 excl. taxPreliminary estimate for one variant

Downloads
240
Likes
39
Rating
4
P
PrintablesStillpointx

MT3608 Step-Up Adjustable DC-DC Switching Boost Converter snap case / holder / knob

It's a remix from https://www.thingiverse.com/thing:3370199 This is a simple snap case print to keep you from burning your fingers on the hot choke coil of the MT3608 voltage boost module. - No additional screws required! - Please note…

Print approx. €0.64–€0.79 excl. taxPreliminary estimate for one variant

Downloads
182
Likes
19
Rating
5
P
PrintablesJTEE3D

Parametric Laptop Wall/Under Counter Mount (Fusion 360)

The size can be modified in Fusion 360. It's suitable for laptops and anything else that's flat like a laptop.

Print approx. €2.12–€2.60 excl. taxPreliminary estimate for one variant

Downloads
133
Likes
14
Rating
5
P
PrintablesVaReTaS

Laptop Stand (great for HP Elitebook x360)

Remixed the design by GeekMystique so I could use the stand as a standalone for an HP Elitebook x360 with the screen only, changing the inclination to 65 degrees. It also works well for a traditional vertical laptop mounting. A great way…

Print approx. €4.84–€5.92 excl. taxPreliminary estimate for one variant

Downloads
130
Likes
8
Rating
0
P
PrintablesAUGU5TO

Furniture Roller - Castor - Smooth 360 ° Rotation - Suitable for IKEA Lack - Möbelrolle

--- This model is without a break to fix the caastor. You can find a model with break - here . --- This furniture rollers have smooth 360 rotation around the vertical axis and can be used for example for your Prusa Enclosure V2 - MMU2S to…

Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
127
Likes
61
Rating
5
P
Printablestom

Seilklemme parametrisch Fusion 360/ Rope clamp parametric Fusion 360

Für unsere Sonnensegel brauchten wir einfach zu handhabende Seilklemmen für Kunststoffseile. Da sich die Seile der verschiedenen Hersteller unterschiedlich verhalten, kann es notwendig sein, eine kleinere oder größere Klemme zu verwenden.…

Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
106
Likes
11
Rating
5
P
PrintablesJaneo

Insta 360 One RS replacement battery

Its function is to allow the camera to be used without the need for the normal battery. Instead, the replacement can be used while the camera is connected to a power bank or charger. This functionality is especially useful for creating…

Print approx. €0.73–€0.90 excl. taxPreliminary estimate for one variant

Downloads
101
Likes
6
Rating
0
P
PrintablesOBA

Märklin H0 modular Bridge Rail-C 360mm Straight Element (multi-part) / Märklin H0 modulare Brücke Gleis-C 360mm Element gerade (mehrteilig)

Motivation [ I need a long straight bridge element... ] When building railway bridges and the bridge crosses a track on the ground diagonally or crosses a parallel double track, sometimes the available straight bridge elements (172mm,…

Print approx. €2.17–€2.65 excl. taxPreliminary estimate for one variant

Downloads
87
Likes
5
Rating
0
P
Printablescbrick

Casing for MT3608 micro usb

This is a casing for the MT3608 DC-DC Boost converter which can be used in various applications. I use it to create a usb power box like PV-Productions sell to power my lego motors over usb, since my PV-Productions one broke. You can…

Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant

Downloads
78
Likes
12
Rating
5
P
PrintablesMartin

Temperature & Humidity Meter Stand or holder for Prusa i3 MK3 360 degrees

Temperature & Humidity Meter Stand 360 degrees Temperature & Humidity Meter Holder 360 degrees for Prusa i3 MK3, MK3S & MK3S+ https://www.amazon.co.uk/dp/B07QH1MYPY?ref_=cm_sw_r_apin_dp_DXMTDF2ASNR0AGST3CJ2&th=1 Filament: PLA or PLA+ or…

Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant

Downloads
75
Likes
12
Rating
5
P
PrintablesNygaard Design

STRAPVICE (BandClamp) (Parametric) (Fusion360)

Very useful for glueing together lasercut boxes etc. There is Parameters you can edit in the fusion file. Parameters include: Angle, belt width, belt thickness

Print approx. €2.80–€3.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
67
Likes
14
Rating
5
P
PrintablesOBA

Märklin H0 modular Steel Girder Bridge Rail-C 360mm Straight Element (multi-part) / Märklin H0 modulare Stahlträger-Brücke Gleis-C 360mm Element gerade (mehrteilig)

Motivation [ I need a long straight bridge element... ] When building railway bridges and the bridge crosses a track on the ground diagonally or crosses a parallel double track, sometimes the available straight bridge elements (172mm,…

Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant

Downloads
59
Likes
5
Rating
0
P
PrintablesSteveS42

Heat Insert Press (Fusion 360 customizable)

Design There are several press designs available. Many require parts like rods or rails. Some are all plastic but require support. I set out to design one that requires no support, uses only cheap commonly available hardware, and is very…

Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
51
Likes
28
Rating
0
P
PrintablesJaKeU

360° overhang test with front n back marks

Presliced gcodes included: MK3S - QUALITY/SPEED; 0,15/0,2 layer height MK3.5 - STRUCTURAL/SPEED; 0,15/0,2 layer height MK3.9 - STRUCTURAL/SPEED; 0,15/0,2 layer height MK3.9S - STRUCTURAL/SPEED; 0,15/0,2 layer height MK4 -…

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant

Downloads
50
Likes
5
Rating
0
P
Printablescudaman

Insta360 X3 desktop Stand fits with metal case installed

I use a metal frame on my insta360 X3 camera so the camera does not take any stresses when mounted and I can also use a GoPro style mount. Problem is, all the desktop stands do not allow you to leave the frame on while your working in the…

Print approx. €2.08–€2.54 excl. taxPreliminary estimate for one variant

Downloads
42
Likes
12
Rating
0
P
PrintablesRicardoSB

Ikea Skadis - RemoteTV Samsung - TM2261S - Model Fusion 360 inside

Custom-designed holder to hang the Samsung TV remote model TM2261S on IKEA Skadis perforated panels. It is printed in PLA with a 0.15 mm layer height, with supports, and provides a firm and snug fit to keep the remote always accessible…

Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant

Downloads
36
Likes
2
Rating
0
P
PrintablesFokieH

360 Bed Scraper Set

Hier ein Satz Druckbett Schaber in 3 verschiedenen Größen. Ich habe diese in PETG gedruckt. Viel Spaß beim Drucken. Wenn Euch das Modell gefällt würde ich mich über ein like freuen. Here's a set of print bed scrapers in 3 different sizes.…

Print approx. €1.56–€1.91 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
27
Likes
10
Rating
5
P
PrintablesHawkeye

PoleMaster connector for AstroTrac 360

This is a PoleMaster connector for AstroTrac 360 mount. It requires following 2 items for assembly: My “Dovetail saddle for AstroTrac 360” ( https://www.printables.com/model/528477-dovetail-saddle-for-astrotrac-360 ) & “Ultra mini compact…

Print approx. €1.82–€2.23 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
11
Likes
2
Rating
0
P
PrintablesMarek

Mocowanie skrzynki bezpieczników URSUS C330/C360

W plikach znajduje się mocowanie skrzynki bezpieczników wersja Rev00 najnowsza, które w moim przypadku zostało zastosowane do Ursus C330. Mocowanie podnosi nieznacznie całą skrzynkę przez co przewody nie wystają tak nisko. Całość…

Print approx. €1.02–€1.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
6
Likes
1
Rating
0
P
PrintablesJayS

Gridfinity Box for DC/DC Converter MT3608

1x1 gridfinity grid and 4 height units. Fits 6 MT3608 DC/DC converters

Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant

Downloads
5
Likes
3
Rating
0
P
PrintablesRobert G

Skadis Pegboard, all sizes 80 to 360mm

Tired of being limited to IKEA’s fixed SKÅDIS sizes? Here’s the print your own version: fully parametric, resizable, wall-ready. Pick any size you want, 80 mm to 360 mm included Standard 20 mm spacers stand-off Countersunk mounting screw…

Downloads
7,608
Likes
2,253
Rating
5
P
PrintablesRod

IKEA Skadis Fusion 360 Models

Update 2023-09-17 Quad stl and Fusion 360 file updated with correct ‘Quad’ dimesions. Thanks to Evolver for catching this. Update 2023-08-31 New models (R2) have replaced the original models. The new models install easier in the Skadis…

Downloads
6,827
Likes
758
Rating
4.73
P
Printablespogofcz

Gridfinity block template - Easy to use! (For Fusion 360)

Edit 8/3/2024: Added template without magnet holes. They are still in the sketch but they are not extruded. This easy to use template lets you make your own blank Gridfinity blocks. Sugested workflow: Open the template file. In the Modify…

Downloads
6,511
Likes
442
Rating
4.96
P
PrintablesMAQUINA

IKEA SKADIS PEGBOARD 200X200MM / 360X360MM

3D MODEL DESCRIPTION Since the space of my desk getting lesser and lesser… so I have think of a effective way to re-organise all the tools and other stuffs… Pegboard is a fancy way to keep the things organised as we can mix’n’match the…

Downloads
6,311
Likes
696
Rating
4.71

3D Printable Screw Generator for Fusion 360 (Optimized Threads)

3D Printable Screw Generator for Fusion 360 This is a fully editable Fusion 360 file designed to generate screws specifically optimized for 3D printing. Most standard metric threads are designed for metal manufacturing, not for FDM…

Downloads
6,125
Likes
1,620
Rating
5
P
PrintablesStueyNSFW
18+

The source marked this model as adult content.

Downloads
5,094
Likes
307
Rating
3
P
PrintablesJosef Adamcik

MTG Commander Deck Box (with parametrized Fusion360 file)

MTG Commander Deck Box 100+ sleeved cards. Default inner dimensions are: width 70, depth 65, height 93 mm but all can be adjusted. Parametrized Fusion360 file for easy adjustment included. MTG deck box for 100+ sleeved cards. Heavily…

Downloads
4,824
Likes
336
Rating
4.59
P
PrintablesLukasM

Chain Spray Nozzle 360°

With this spray can attachment, the chain can be evenly sprayed on all sides. The attachment can be mounted onto standard spray heads and extension tubes. Inside the attachment, the liquid is distributed through channels to 6 nozzles .…

Downloads
3,916
Likes
1,904
Rating
4.94
P
PrintablesForeverwinter

Milwaukee Packout Base Cleat - Fusion 360 file included

Converted @Zer0sum's design into Fusion 360: Modified chamfers to better match Packout design Adjusted tolerances for a better fit Added mounting holes for #8 Screws Upsidedownified = ready for printing without supports Modify the .f3d…

Downloads
3,775
Likes
291
Rating
4.6
P
PrintablesGustav

Hi Res Apple AirTag model for Fusion 360 and more

A high definition 3d model of an Apple AirTag made from the specs Apple provides Also provides models to create the negative space needed to fit an AirTag. These are with 0.15 and 0.30mm margin. They do not have the flange between battery…

Downloads
3,116
Likes
217
Rating
5

Parametric 3D Printable Spring Generator (Fusion 360 File)

This is a parametric Fusion 360 file that allows you to generate different types of 3D printable springs by simply adjusting a set of parameters. The file includes three different spring designs : Blue spring → Classic wave spring…

Downloads
2,828
Likes
965
Rating
4.83
P

Xbox 360 Controller Stand

I followed the instructions that npiegdon laid out for his excellent Nintendo Switch Pro Controller Stand to make something similar for Xbox 360 Controllers.

Downloads
2,313
Likes
245
Rating
4.98
P
Printables3DPrintNovesia

360° Bottle Opener

Change log: New version Added (BottleCap Design) 360°ɹǝuǝdo ǝlʇʇoq allows you to open your bottle in360 different directions! Printsettings: Nozzle: 0.4mm Layer: 0.2-0.3mm Infill: 25-35% Perimeters: 3 Bottom/Top layers: 3/3 Seethrough…

Downloads
2,254
Likes
382
Rating
4.79
P
PrintablesMar Ber

Box with hinged lid & clip close | Scharnierdeckelbox mit Bügelverschluss | FUSION 360 file

english First of all: I appreciate every like and every rating. A small box with a hinged lid. It is suitable for medium sizes. As in my small box (…

Downloads
2,237
Likes
212
Rating
5
P
PrintablesOshhe Yt

3D Root Watering Spike 15cm - 360° Irrigation System

Title: 3D Root Watering Spike 15cm - 360° Irrigation System Description: An innovative and effective solution for indoor and outdoor plant care! This 15cm watering spike is designed to deliver water directly to the root zone, preventing…

Downloads
2,153
Likes
856
Rating
3.33
P
PrintablesPicoNano

Snap-fit Parametric Enclosure Fusion360

This is an enclosure where the length, width, height, shell thickness and gap for 3d printer tolerance is defined in the user variables menu of Fusion 360. I included the cad file so you can make a box of any size, or change the design to…

Downloads
2,122
Likes
90
Rating
5
P
PrintablesERKARK

Xbox 360 Slim HDD Case

For Xbox 360 Slim and Xbox 360 E. -all screw holes had 1 centimeter diameter counterbore, should support most generic PC HDD screws -holes for a pull tab, use scotch tape. -thick pry hole for when the pull tab was unusable/broken, use a…

Downloads
1,985
Likes
121
Rating
4.88
P
PrintablesSwesen

Original Prusa i3 MK3 for Fusion 360(and STL)

v23: discovered that the bearing holes in the Y carriage were over-sized I have corrected them to measurements of my own printer. v22: added holes for the power connection on the heatbed and also chamfers to the 9 mounting holes. v20:…

Downloads
1,899
Likes
60
Rating
5
P
PrintablesHugo

Gridfinity Multiconnect (multiboard) drawer system case (Redesigned with Fusion 360)

Note : In the pictures, the feet are on the top instead of the bottom, I fixed that in the model after realizing that they where feet and not just connecting pegs! Fusion 360 redesign of the Chipp Walters' drawer system design (just the…

Downloads
1,856
Likes
479
Rating
4.75
P
PrintablesAustin Vojta

Xbox 360 Slim 2.5" HDD/SSD adapter

Adapter that will let you use a standard (~100mm x 70mm x 7mm) 2.5" HDD or SSD in a modded Xbox 360 Slim (aka Xbox 360 S). Just slide the drive in, and then plug into your 360. Be sure to pay attention to the orientation of the plug.…

Downloads
1,751
Likes
193
Rating
4.13
P
Printablestyler

Dog Food Measuring Cup (3/4 cup) - Parametric F360

I originally made this for measuring out dog food, although I have included a blank version that could be used for other things. I am also including the Fusion 360 file so that it can be customized, including the ability to easily change…

Downloads
1,735
Likes
143
Rating
4.9
P
PrintablesHans

DIN Rail/Hutschiene EN 50022 with interlocks, different sizes and customizable via Fusion 360

Din rail with exact dimensions (screenshot shows them half). The files attached directly and shown in the images are 4TE (Teilungseinheiten, 1TE = 17,5mm) long. I attached a .zip with 1TE, 2TE, 4TE, 8TE and 12TE. Fusion 360 project file…

Downloads
1,704
Likes
89
Rating
5
P
PrintablesMarB

Parametric Gridfinity Box - Fusion 360

UPDATE: I accidentally left “section analysis” on. So if you set height to more than 6U, it showed only a bit. It was confusing, now fixed. New way to tackle lifting corners. I tried mouse ears and all. Nothing really works 100% and takes…

Downloads
1,597
Likes
160
Rating
4.75
P
PrintablesMarvin A

Stackable Coin Sorter (Canadian, US, Euro, JPN, UK, Fusion 360 included)

*** UPDATED JUNE 2024 *** Version 2 (squared) is available and is being maintained here. https://makerworld.com/fr/models/374953#profileId-398255 *** UPDATED - March 2024: Japanese and UK version added as suggested in comments/chats. ***…

Downloads
1,535
Likes
166
Rating
5

Dragon Scale Flexible Mesh/Fabric l Full design process included (Fusion 360)

🐉 Dragon Scale Flexible Mesh Created by KNINcustom · Explained step-by-step on my YouTube channel 🎥 👉 https://www.youtube.com/@KNIN_Custom 🔍 Description This is a Dragon Scale–style flexible mesh , entirely modeled from zero in Fusion 360…

Downloads
1,496
Likes
481
Rating
5

PCO-28 (German PET Coke Bottle) Thread profile for Fusion360 - Gewinde für PET Mehrweg Cola Flaschen

Fusion360 custom thread profile for soft drinks bottles (PCO-28 spec). Unzip to \Users\ {USERNAME} \AppData\Local\Autodesk\webdeploy\production\ {NEWEST FOLDER} \Fusion\Server\Fusion\Configuration\ThreadData Note: You'll need to change…

Downloads
1,462
Likes
52
Rating
5
P
PrintablesMFTuning

Xiaomi Mi Home Security Camera 360 - Holder

Переходник - крепление для камеры Xiaomi Mi Home Security Camera 360 Adapter - mount for Xiaomi Mi Home Security Camera 360 Category: Camera

Downloads
1,378
Likes
100
Rating
5
P
PrintablesLivius

XL Fan Shroud 360°

I came to the conclusion from user feedback and even Prusa that my previous duct had some room for improvement. Inspired by the MK4S duct, I went through many iterations of the duct to distribute air evenly around the nozzle but to the…

Downloads
1,375
Likes
337
Rating
4.84
P
PrintablesSerial-Comma

Horizontal Chest Mount for Insta360 Cameras

Print with supports on build plate at 0.2mm. Increase infill density and/or perimeter count and/or material used to suit your strength needs. When you try to insert the ¼" screw, you'll need to penetrate the one-layer thick “threading”…

Downloads
1,352
Likes
124
Rating
5
P
PrintablesSteve Hodge

Ball Joint (with parametric Fusion 360 source)

A ball and socket joint with full Fusion 360 source. It's parametrized so the joint can be resized easily. It does use the standard thread tool so the thread size does need to be manually adjusted after changing the ball size. The default…

Downloads
1,343
Likes
99
Rating
4.67
P
PrintablesGrey

NEW!!! Toroidal Propeller Maker V2 (Fusion 360)

[Parametric Fusion file for designing toroidal propellers (for drones)] V2 AVAILABLE NOW!!! Changes in V2: Blade Count Parameter! (Be careful with the count or else fusion might crash. DON'T TRY OVER 100!) Parametric Fillets to improve…

Downloads
1,326
Likes
96
Rating
5
P

Road Traffic Safety Cone for RC Toy Cars / Sphero - Fusion360 Parametrical

I use this for making obstacle course for Sphero droids, but it will be great for any RC toy like cars for your kids! Size Base 45mm x 45mm Hight 57mm Wall thickness 1.2mm Main features Stackable - for easy storage Fusion360 file included…

Downloads
1,318
Likes
358
Rating
4.92
P
PrintablesJDolven

Honeycomb Wall created in Fusion 360

Honeycomb wall in Fusion360. You can easily change the «pattern» to change the wall size. Requires some basic Fusion 360 knowledge to edit. Important : Check if you need even or odd number of rows if you already have printed wall…

Downloads
1,293
Likes
122
Rating
5
P
Printablesgiammy_m

Philips OneBlade Pro 360 case

This is a case based on the parametric Rugged Box by Whity, I created an insert that can be slid inside the box. It can carry every blade and comb that came in the original box, the charger has its slot too. There are some additional…

Downloads
1,245
Likes
237
Rating
4.69

NASA-Style Hexagonal Flexible Mesh/Fabric (Reinforced) l Full design process included (Fusion 360)

🧩 NASA-Style Hexagonal Flexible Mesh Created by KNINcustom · Explained step-by-step on my YouTube channel 🎥 👉 https://www.youtube.com/@KNIN_Custom 🔍 Description This is a NASA-style hexagonal flexible mesh , designed from scratch in…

Downloads
1,220
Likes
138
Rating
4.89
P
PrintablesAdam L

Foot Fidget Rollers : Play with (or massage) your feet! [Customizable Fusion360]

Sometimes part of your body other than just your hands need to fidget (or be massaged). These two simple and functional designs hopefully help stimulate your feet and mind during those longer work days. Provided in 3MF and Fusion360 files…

Downloads
1,220
Likes
164
Rating
4.86
P
PrintablesscaryPug

Ender 3 Knurled Extruder Knob (Parametric Fusion 360)

Update May 30, 2022 Tighter fit with 5.05mm hole added. --Original Post-- This is a knurled extruder knob for Ender 3, tested on Ender 3 v2. Should fit any stepper motor with 5mm shafts. F3d file included for easy remix. Print it with…

Downloads
1,196
Likes
163
Rating
4.69
P
PrintablesOngXeno

Insta360 X3 (reference 3D model)

Reference 3D model of Insta360 X3

Downloads
1,193
Likes
40
Rating
0
P
Printablesschiko

Parametric Gift Box (Fusion 360)

I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Attention! It seems like the actual version of Fusion has…

Downloads
1,183
Likes
255
Rating
4.95
P
Printableslendres

Expo Dry Erase Marker Set with Fusion 360 Files

Holder for Expo Dry Erase Set. There are two versions, one for 4 markers and one for 6 markers. It can be attached to a wall using Command Strips or placed on a desk or table. There are also recesses in the back for gluing 6 mm diameter…

Downloads
1,164
Likes
164
Rating
4.95
P
PrintablesFelix Wiseman

HPE DL380p/DL360p Gen8+ SFF 2.5" SSD/HDD Caddy

This is a hybrid between 2 prints I had found on Thingiverse that had ups and downs. The first one fit perfectly, but the front looked horrendous. The second didn't fit well, but looked great. I mixed them and used that to make a cleaner…

Downloads
1,141
Likes
37
Rating
5
P
Printablesmscalora

Threaded Bottle or Jar Cap Generator for Fusion 360

I've needed screw on lids for bottles and jars several times since I started 3D printing, I've always created a one-off design each time. I've used my experience and knowledge about making lids along with my experience building robust…

Downloads
1,141
Likes
83
Rating
5
P
PrintablesMts 3D prints

Samsung tv Remote Wall Holder (TM2360E)

Simple Wall Mount for Samsung TV Remote Control

Downloads
1,126
Likes
83
Rating
4.83
P
PrintablesMartin

Protractor 360 Degrees

360 degrees protractor Type Protractor Size: 150 x 150 x 1.50mm

Downloads
1,116
Likes
66
Rating
5
P
PrintablesKevin

Xbox 360 Stand

Printed with Prusament PETG Jet Black 0.2mm no rafts or supports required.

Downloads
1,113
Likes
110
Rating
4.82
P
PrintablesHistoricc

Parametric Ikea Skadis Pegs / Hooks Fusion 360

I wanted to create some larger objects to fit on my Skadis, but was unable to find any models that allowed me to easily specify the size of my objects surface and get the correct peg configuration so i made my own that you can use too!…

Downloads
1,110
Likes
99
Rating
5
P
PrintablesDeKura

Xbox 360 Game Holder

Print the letters with horizontal expansion 0,28mm for the best fit. No glue should be required, but its recommended for a good hold.

Downloads
1,109
Likes
165
Rating
4.67
P
Printablesforkineye

Parametric Battery Cell Holder (Fusion 360 Archive Included)

This is a parametric holder / jig for spot welding cylindrical battery cells. Simply download the Fusion 360 archive and adjust the parameters as needed for your cells. I have included pre-generated STL files sized for 18650 cells in 1x2…

Downloads
1,050
Likes
130
Rating
5
P
PrintablesMarcusInCo

Gridfinity Parametric Divider Bin Fusion360 File

Based off Zack Freedman's pretty useful Gridfinity stoarge system. Original model I used can be found here: https://myhub.autodesk360.com/ue2b114c8/g/shares/SH35dfcQT936092f0e43a9d5084dee87f7ba More info on Gridfinity can be found here: I…

Downloads
1,040
Likes
111
Rating
5
P
PrintablesGazB

ESP32-WROOM-32D Dev Board Model (Parametric - Fusion 360)

I needed this to design a case for a WLED board so thought I'd upload it for others. It's Parametric (has parameters you can change for every measurement) so you can easily tweak it for your specific board. Hide the aerial if it doesn't…

Downloads
1,033
Likes
21
Rating
5
P
PrintablesSpike Mix

Customizable Gridfinity Boxes Filled-in (Fusion 360)

This is a remix of the original bins by Zack Freedman that you can find here: https://bit.ly/ZFGridfinityDividerBins This is the parametric version of the model with the containers filled-in. You can edit the parameters of the model in…

Downloads
1,020
Likes
105
Rating
5
P
PrintablesAngrysquirrel

Raspberry Pi 3B+ model for case fitting with Fusion 360 file

Measured a Pi 3B+ to design a case around. Included Fusion 3d export as well for anyone that wants to tweak. https://youtu.be/sjtyZTx15O0

Downloads
1,007
Likes
31
Rating
4
P
PrintablesCmarlow

360 Fishing Rod Holder

I made this 360 Trolling fishing rod holder that attaches to a boat railing 22-25mm. Uses m6 hardware to atttach it. Made a couple of different version depending on where you like the attachment point to be and if you want closed or open…

Downloads
1,001
Likes
155
Rating
5
P
PrintablesMFTuning

Xiaomi Mi Home Security Camera 360 - Wall mount

Угловое крепление к стене для камеры Xiaomi Mi Home Security Camera 360 Category: Camera

Downloads
1,000
Likes
74
Rating
1.5
P
Printables3D Sourcerer

Customizable Luggage Tag (FUSION 360 FILES INCLUDED)

Settings: Layer Height: 0.20mm Letter Extrusion Depth (Embossing Depth): 1mm Filament Swaps: Layer 6 & Layer 11 (see video for details) Watch our YouTube video for a step-by-step guide on customizing your Luggage Tag in Fusion 360!

Downloads
998
Likes
76
Rating
5
P
PrintablesTOKENIZER

osVAC neo F32H32-withSlipring + step + Fusion 360

F32H32. Is smaller than osVAC-original. I did bring osVAC to Fusion 360. The link to the latest version of the files can be found here: Ich habe osVAC in Fusion 360 nachgebaut. Der Verweis auf die immer aktuellste Version ist hier:…

Downloads
993
Likes
59
Rating
5
P
Printablesjmderander

XBox 360 wireless controller battery holder with removable cover

This is a remix of kingnai's amazing battery holder for the xbox360 controller. This has a removable sliding cover so, no glue is required. The batteries have to be connected at the bottom of the battery holder, you can use some tin foil…

Downloads
982
Likes
57
Rating
4.5
P
Printablestyler

Wall Plates (variety) - Fusion 360

The important stuff: This fusion file is set up to allow you to generate multiple types of north american wall plates, as well as single or multiple gangs, and oversize or undersize plates. To choose the type, unsupress one sketch that…

Downloads
946
Likes
38
Rating
5
P
PrintablesTANOYCIA 3D

Jarra Chop totalmente editable en Fusion 360 y step con stl para imprimir para vaso de 600cc

Jarra Chop totalmente editable en f3d y step con stl para imprimir para vaso de aluminio 600cc Impresion en PLA o PETG Sin soportes

Downloads
928
Likes
17
Rating
0
P
PrintablesRi3del

egg cup (+ Fusion360 file)

Take the fusion file and make your own design! :-)

Downloads
927
Likes
110
Rating
4.64
P
PrintablesCasey Billadeau

Obsessively Accurate TNG Starfleet Combadge V2 - 2360s

Hi! This is the latest revision on my uber-accurate Starfleet combadge. My first attempt at this came back in 2020 when I had only reference images to go off of. I later acquired a badge from the now-closed Xscapes Props, cast from a…

Downloads
913
Likes
114
Rating
4.67
P
Printablesallabout3dblog

360° LARGE 3d scanning frame for marker based laser scanner (Raptor, RaptorX, MetroX, HX)

YOUTUBE video showing the use of this 3d scanning frame: Improved LARGE version of my scanning frame v2 which is working great using RaptorX in parallel laser scanning mode. Motivation for designing this 3d scanning frame: Object can be…

Downloads
886
Likes
154
Rating
5
P
PrintablesKevindavid

360 fan flow

A sparepart to improve the quality of overhang for bambulab p1p/s

Downloads
885
Likes
225
Rating
4.2

Rc F1 Boat With Outboard Mercury Racing 360

Build video https://youtu.be/SllnjgBfWdE?feature=shared https://youtu.be/PSYab_l4kDQ?feature=shared ####Mercury Racing 360 Outboard Engine### Outboard file link https://cults3d.com/:2254330 -This outboard has a height of 20cm -Suitable…

Downloads
877
Likes
106
Rating
0
P
Printableszx82net

Skeleton Waveguide Subwoofer Speaker - (Fusion 360 archive included)

A remix of Hexibase's subwoofer designed for clear side panels, so the cool waveguide is visible. It would also suit wooden sides. It's smaller than the Hexibase version, so it will print on a 19cm x 19cm print bed. I kept exactly the…

Downloads
869
Likes
279
Rating
0
P
PrintablesPrint2Win

MicroSwiss Ender 5 DirectDrive+AllMetalHotend Assembly (Step and Fusion360)

This is a model of the MicroSwiss DirectDrive and AllMetalHotend for the Creality Ender 5 printer and was created by manually measuring some parts from my CR10/Ender 3 MicroSwiss DirectDrive, except for the backplate that I uploaded here…

Downloads
866
Likes
49
Rating
5
P
PrintablesMagnus996

Parametric box for HSW (Fusion 360)

Need a simple rectangular box for HSW? Download my fusion 360 file and pop in your own dimensions. Please leave a like and download if you appreciate my work to spin my prusameters wheel ;). UPDATE: Fixed missing height parameter from…

Downloads
861
Likes
124
Rating
4.6
P
PrintablesECF

ATX Benchtop Power Supply 0-30V (Remix) - Fusion 360

NOTICE: Use extreme caution when working around high voltage and high current devices! Please seek assistance if you are not comfortable working with power supplies. Update 12/09/21 - Increased overall length by 10mm to allow more space…

Downloads
845
Likes
256
Rating
5
P
PrintablesscaryPug

M4 Knurled Bed Leveling Knob for Ender 3 (Parametric Fusion 360)

This is a knurled bed leveling knob for any bed with M4 screw, tested on Ender 3 v2. There are 2 versions: M4_knurled_levelingKnob.stl : you need an M4 7mm nut for each knob, (see photo for the exact size of the nut)…

Downloads
832
Likes
69
Rating
4
P
PrintablesECF

Flexible Hose Link - Fusion 360

The "Flexible segmented vacuum hose" by teslapunk was just what I was looking for, but I needed to design different end pieces. I recreated the link segment in F360 with user parameters to make it easier to adjust the size as well as…

Downloads
831
Likes
136
Rating
5
P
PrintablesthoperSought

customizable, solid (filled-in/blank) Gridfinity boxes/bins for custom organizers (Fusion360/STEP)

overview this is a completely from-scratch model of Zack Freedman's Gridfinity bins for creating custom organizers to tidy up your desk drawers/tool cabinets, etc. it's intended to be: efficient (minimum number of operations on the…

Downloads
830
Likes
48
Rating
5
P
Printablestessier.work

Tessier.Work Willys MB Radio Controlled Open Source Design Files (STEP & FUSION 360)

Please like the model if you download it. It helps. Thanks! Included are the complete assembly of the Tessier.Work Willys MB Radio Controlled in Step and Fusion 360 format. If you want to print it, download the stl files here:…

Downloads
827
Likes
172
Rating
5
P
PrintablesFruntke

V2 - UPDATE: TRUMA Heater Airflow Deflector for Motorhome – 360° Adjustable Direction

UPDATE: V2 Da die vorherige erste Version nach Benutzung und anschließender Fahrt mit dem Wohnwagen immer wieder herausfiel oder sich sehr leicht lösen ließ, habe ich mich dazu entschlossen das Teil so zu modifizieren, dass es nun in die…

Downloads
825
Likes
56
Rating
5