Search results: 413

Sort order

137 models

P
Printablesgsatelite

WAGO 221-413 and 221-613 Mount (3 x 2)

WAGO 221-413 and 221-613 Mount (3 x 2) Item no. 221-413 Connection technology CAGE CLAMP® Actuation type Lever Connectable conductor materials Copper Nominal cross-section 4 mm² / 12 AWG Solid conductor 0.2 … 4 mm² / 24 … 12 AWG Stranded…

Downloads
982
Likes
118
Rating
4.8
P
PrintablesM

Wago 221-413 angled clip mount

My own take on the very prevalent angled wago mount. This version has retainer lips on the rear side so the wago can't slide out. Also I think all the others are double mounts. If using this with high voltages or current, you should…

Downloads
260
Likes
28
Rating
4.67
P
PrintablesHAL9000

Wago 221-413 x6 mount

I needed a holder for 5-6 Wago 221-413, for which I have the original: https://www.printables.com/de/model/66531-wago-221-mounts so modified that it fits my requirements.

Downloads
259
Likes
50
Rating
4.5
P
PrintablesLeon.Reijnders

Wago 221-412, 221-413, 221-415 Din Rail Mount (Onshape)

Wago 221-412, 221-413, 221-415 Din Rail Mount . Can also mounted by using a M5 Countersink Screw on a Flat Surface. printed in PETG Perimeter: 3 Infiltration: 15% Layerheight: 0,2mm If you like it, give me a like. you can modify the Parts…

Downloads
227
Likes
24
Rating
5
P
PrintablesIatraliptes

Wago 221 412 413 and 415 double / triple and single / double lined connector for 2020 / 3030 extrusions

Why? I needed adapters to mount the Wago 221 series connectors to 2020 AND 3030 extrusions. I wanted them to be modular in size and space efficient. Those adapters are a remix of the following models:…

Downloads
1,897
Likes
199
Rating
5
P
PrintablesJuli15

Wago 221-(412, 413, 415, 420) DIN Rail Mount / Holder

DIN Rail Mount for Wago 221-412 (2-conductor), Wago 221-413 (3-conductor), Wago 221-415 (5-conductor) and Wago 221-420 (10-conductor) as well as mixed Connector mounts. Includes Models where the wago opens to the left (Models ends with L)…

Downloads
1,634
Likes
537
Rating
4.63
P
PrintablesOtann

Wago 221 412 413 and 415 mounts for 2020 extrusion

Wago mounts I needed a mount with two sections so I could join multiple fans on tha same line for The Filter project, while original had only three sections variants. I also chaged the model cosmetically a bit. Wago Splitter I've also…

Downloads
1,352
Likes
131
Rating
4.88
P
PrintablesDarkstar77

3 x Wago 222-413 DIN Rail Mount

UPDATE: Added a “R2” version which allows the Wago's to be opened while mounted. It was the only complaint I've seen with this. I adjusted the rotation of the mounts, and slightly redesigned the overall holder. The centre Wago might be…

Downloads
1,168
Likes
158
Rating
4.75
P
Printableschwiede

WAGO 221-413 din rail mount

I designed this simple DIN rail mount to hold three WAGO 221-413 connectors . With a height of just 9.2 mm , two mounts fit into 1TE (the width of a standard European circuit breaker). It snaps firmly onto the rail and can be released…

Downloads
914
Likes
255
Rating
5
P
Printablesschellek

Wago 221-413 mount

In order to wire the controller fans of my voron I used wago terminals. I wanted to have the style like the ones that are used for mains voltage. That's why I used this design as template and adapted it for two wago terminals.

Downloads
707
Likes
61
Rating
5
P
PrintablesWiseone

Wago 221-413 Mount

The 4mm 3 wires Wago connector is a useful electrical fitting. Often, it needs to be secured to a base plate. Wago do have base clips, but inconvenient to get hold of. Here is my design for a quick solution. In addition to the Wago…

Downloads
678
Likes
86
Rating
3.75
P
PrintablesAlego

Holder for Wago 221-413 and 221-415

Holder for Wago 221-413 and 221-415 to screw into wood or metal with flat head screws. Halter für Wago 221-413 und 221-415 zum anschrauben in Holz oder Metall mit Flachkopfschrauben.

Downloads
577
Likes
104
Rating
5
P
Printablespjvenda

Wago 221-413 Junction Box for 3 flex wires: 3, 4 or 5 core

Electrical safety warning: Messing with electrics is dangerous and kills. Please don't attempt to use this junction box if you are not familiar with electric safety procedures and regulations in force in your country. Your safety is not…

Downloads
555
Likes
182
Rating
5
P
PrintablespLfuego

Don't Panic - Key Cap Logitech G413 Carbon

A key cap for the Logitech G413 Carbon Gaming Keyboard with multiple inserts so you can easily change the text. Designed so that the light shines on through (printed a couple of clear layers to help out). Actually, did one without the…

Downloads
485
Likes
45
Rating
0
P
PrintablesBassfahrer

Mittelkonsole für Suzuki Samurai SJ413

Mittelkonsole für Suzuki Samurai sj413 mit supports gedruckt auf Ender 3 V3 Plus

Downloads
446
Likes
24
Rating
0
P
PrintablesDarkstar77

3030 Extrusion Mount For 3 Wago 222-413 Blocks

I designed this for mains wiring up a 3D printer under the hood. The Voron SW uses 2 power supplys, and needs some wiring to be done. I could have used blades, and made a wire harness, but I wanted something I could easily take apart to…

Downloads
434
Likes
62
Rating
4.67
P
PrintablesSQ9MDD

DIN rail holder for 3x WAGO 221-413

A compact snap-on holder designed to mount three WAGO 221-413 connectors on a standard 35 mm DIN rail. Ideal for clean, tool-free installations in control cabinets, automation projects, or DIY setups. This version fits only the 3-port…

Downloads
429
Likes
73
Rating
5
P
Printablesyahbluez

wago-221-413 + 415 tripple DIN-RAIL-CLIP

DIN-RAIL Collection https://www.printables.com/@yahbluez/collections/470887

Downloads
404
Likes
46
Rating
5
P
PrintablesDavid Holecko

WAGO Dispenser 221-413

💡 If you like my design, don’t forget to leave a like ❤ It really helps me keep creating more models. WAGO Dispenser is a practical dispenser designed for quick and organized dispensing of WAGO connectors. It provides easy access to the…

Downloads
392
Likes
180
Rating
4.67
P
PrintablesShortbus

4x 221-413 and 3x 221-412+1 221-413 Wago Mounts for 2020 Extrusion

While building My Voron 2.4 I needed a mount to hold 4 221-413 Wagos for my bed heater. Really I only needed a 3x412+1x413, but I wasn't going to buy a box of 412 Wagos just for 3 of them. I went ahead and made that part as well in 2…

Downloads
358
Likes
33
Rating
5
P
Printablesthall72
Downloads
322
Likes
54
Rating
0
P
PrintablesDevilas

Toilet paper key (Georgia Pacific 50413)

A key for commercial toilet paper dispensers. Square shaped with a cross inside, like as seen in the photo. I believe this is the same as the Georgia Pacific 50413, let me know if this is compatible with any others. Included is a basic…

Downloads
315
Likes
21
Rating
5
P
PrintablesDavid Holecko

WAGO - terminal block 221-413

Terminal block assembly for an electrical junction box using WAGO 221-413 lever-nuts (3-conductor spring connector). Provides safe and reliable connection for electrical wires within the enclosure. Suitable for quick and tool-free wiring.

Downloads
292
Likes
218
Rating
0
P
Printablesschellek

WAGO 221-413 / 221-415 mount

Wago 221-413 / 221-415 mount for 20 mm extrusions.

Downloads
279
Likes
50
Rating
5

Din Rail Wago Holder für WAGO 221 -413

Hier mein Design für einen Wago Din Rail halter für 8x Wago 221 -413

Downloads
243
Likes
28
Rating
0
P
Printablesthall72
Downloads
242
Likes
22
Rating
0
P
PrintablesSchenk

Wago 221-413 Mount for DIN Rail Bracket

This is a Wago 221-413 Mount for a DIN Rail Bracket based on https://www.printables.com/de/@mmuellerphoto ’s design. M3 countersink screws are needed for the DIN Rail Bracket Mount.

Downloads
234
Likes
24
Rating
0
P
Printablesmaddindj42

Wago 221-413 4x Screw

Changed both sides to fit Wago 221-413.

Downloads
185
Likes
61
Rating
5
P
PrintablesKotyarko_O

Bmw E30\E28\E34 - rear sun shade roof hook (OEM: 82 12 9 413 178)

Bmw E30, E28, E34 - rear sun shade holder, in-roof hook. OEM-number: 82 12 9 413 178 Reproduced from the dimensions of original part. As you can see on the pictures, i've used structure paint. Just because preparing the surface for glossy…

Downloads
178
Likes
17
Rating
0
P
Printablesdarthrax

WAGO 222-412/222-413/222-415 or PCT 212/213/215 Terminal Block Clip

A clip to mount a PCT 212/213/215 Terminal Block horizontally and vertically. I have tested these with generic PCT terminal blocks but they should work with the WAGO 222-412/222-413/222-415 as well. Printed using ABS but PETG should work…

Downloads
177
Likes
32
Rating
4

Reinforced top A-arms for WLtoys K989, 284131, K979, K969, K999

After breaking a lot of stock chopsticks, here is a reinforced edition. It is also more precise and limits the play at the wheels. Choose the right STL version for your balls : 3.4 - 3.5mm are for stock plastic hub carriers, and 3.5 -…

Downloads
177
Likes
38
Rating
5
P
PrintablesDSLight

Wago Hutschienenmontage 2x 221-413 DIN rail mounts

Halterung für zwei Klemmen 221-413

Downloads
174
Likes
18
Rating
0
P
Printablesthall72

Lego Compatible (41334.dat) Minifig Hat Knit Cap

This model is compatible with the lego system.

Downloads
168
Likes
24
Rating
0
P
Printablesthall72

Lego Compatible (44138.dat) Bionicle Foot Rahkshi

This model is compatible with the lego system.

Downloads
167
Likes
25
Rating
0

Large Front bumper for WLtoys K989, 284131, K979, K969, K999

This is a larger bumper than the stock one to protect your front drive train while driving your car fast. It can prevent breaking the turnbuckles, A-arms or steering hub carriers in case of front impact. This is compatible with WLtoys…

Downloads
157
Likes
35
Rating
5
P
PrintablesCalli84

Speaker Terminal with Wago 221-413

In our garden house we have an stereo system with old HECO speakers. Their terminal blocks had some damaged screw connectors. Inspired by the clamp mount model from wisestones I created this block with Wago clamps 221-413. Okay, those are…

Downloads
157
Likes
46
Rating
1
P
Printablesfroetz

higher Wago 221 Junction Box for flex wire 3 core (3x 221-413 or 221-423)

This is a higher Version of the original box, so you can mount three WAGO 221-413 or 221-423. It also has three outlets.

Downloads
138
Likes
12
Rating
4.5
P
PrintablesGeorge?
Downloads
128
Likes
11
Rating
0
P
Printablesdjinyus

Makita P-84137 MakPac Storage/Tool Box Inserts

I needed some extra inserts for my Makita P-84137 MakPac Storage/Tool Box. The ones available from Makita are limited to 3 different types (1 x 1, 2 x 1 and 3 x 2) and (as far as i know) only available as a predefined pack. I decided to…

Downloads
128
Likes
17
Rating
0
P
Printablesthall72

Lego Compatible (44139.dat) Constraction Rahkshi Kraata Holder

This model is compatible with the lego system.

Downloads
123
Likes
16
Rating
0
P
PrintablesHi_Im_Dave

Wago Quick Slide Organizer 221 (412 413 415)

UPDATE: 221-412 and 221-415 added. Keep Wago's organized and clean even when stored in your pocket tool bag or toolbox. Holds 10. Slides open from either end. Hex grip texture on top. I may make larger/different sizes in the future.…

Downloads
122
Likes
49
Rating
0
P
Printablesvrzi

Voron V0.2 Kirigami wago mount 3+2 (1x 221-412 1x 221-413)

This model is remix of Kirigami LDO Breakout Mount from LDO Motion. I use it together with original part to connect thermal fuse with wago terminals and also when using ac bed heater to distribute ground wire to build plate and kirigami…

Downloads
120
Likes
18
Rating
0
P
PrintablesKosau

Wltoys k989 284131 284161 284010 Motor Gear Cover (Printable with FDM printers)

A cover to prevent dirt, dust or small stones getting to the gears. (This is a remix of Dionarap's design.)

Downloads
113
Likes
27
Rating
0
P

Wago 221-413 and 221-415 triple mount

Wago 221-413 triple mount for electrical usage Wago 221-415 triple mount for electrical usage

Downloads
108
Likes
21
Rating
0
P
PrintablesKotyarko_O

Bmw E30\E28 - rear sun shade hook holder (OEM: 82 12 9 413 177, 51461905393)

Bmw E30, E28 - rear sun shade hook holder. OEM-numbers: 82 12 9 413 177, 51461905393 Reproduced with the example of original part. There's 2 versions attached: ORIG - original fastening dimensions used. Was bad for my case, poorly fitted…

Downloads
105
Likes
16
Rating
0
P
Printablesmigueljgim

lego pice 6299413

it works better with TPU filament

Downloads
104
Likes
4
Rating
0
P
Printablesthall72
Downloads
104
Likes
16
Rating
0

Wago 221-413-412 Mount for Zero G Mercury One.1 Hydra

Quick printing mount to attach Wago 221-413 and 221-412 per the configuration shown in the screenshot for the Zero G Mercury One.1 Hydra bed mod. Print in ABS/ ASA at 0.2mm or smaller, no supports needed. Mount should fit between the two…

Downloads
104
Likes
21
Rating
0
P
PrintablesEraseme

k969 k989 284131 servo horn

Replacement servo horn for the 284131 (and k9x9) with smaller holes to allow moving to outer hole and increasing steering angle. Holes are 1mm which is very tight but works. Modify / drill the hole out a little if you want an easier time…

Downloads
102
Likes
27
Rating
5
P
PrintablesDionarap

Wltoys 284131 284010 Motor Gear Cover

A cover to prevent dirt, dust or small stones getting to the gears. printed with a resin printer. i don't know if it's possible with FDM printers.

Downloads
102
Likes
18
Rating
0
P
PrintablesFritzPeppone

Wago 221-413 T-connector

Warning This project involves mains voltage wiring, which can be hazardous. Only individuals with appropriate knowledge and experience in electrical work should use these files. I am not responsible for any damage, injury, or harm…

Downloads
91
Likes
32
Rating
0
P
PrintablesMacavinci

Quad Wago + JST with 413 for neutral mount for ZeroG Hydra

Modified one of the 412 openings to fit a Wago 413 for the extra Nuetral wire when running the AC bed on 110V.

Downloads
91
Likes
14
Rating
5
P
PrintablesLay10000

Wltoys K969, K989, 284131 Wheel Rims

Custom rims (wheels) for Wltoys K969, K989 or 284131. Can be printed with 2 colors without a special multicolor printer. Just add a stop a the right height in the slicer and change the filament during the print. The holes are very tight,…

Downloads
90
Likes
23
Rating
0
P
Printablesstenzy

WAGO 221 Big Boxes (412 -413 -415 -2401)

This is my version of WAGO oragnizer boxes inspired by the 221 series, its supportless and easy to print. You only need printed parts and Superglue gel or liquid. You can choose from different versions, see the attached .stl files.…

Downloads
90
Likes
47
Rating
0
P
PrintablesROG Solutions

Suzuki Sierra/SJ413/Samurai transfer case shifter bush.

If you are having trouble with the transfer case being stuck in neutral, you may need to replace the shifter bush. To remove the shifter bush, remove the boot on the inside of the vehicle, then remove the boot on the transfer case, then…

Downloads
86
Likes
3
Rating
0
P
PrintablesSimplifiedLife

Wago Mount for any print or model 221-413 / 221-412 / 221-415

Some times you just need to slap a wago on a print to connect wires. Grab the stl, add it to your slicer and WAGO! I created a mount designed for integrating with other designs for the 221 Wago Wago 221-413 / 221-412 / 221-415 Simply…

Downloads
85
Likes
16
Rating
0
P
PrintablesLeoRc

Rear Knukle ENFORCED - WLTOYS 284161, 284131 - k969 and k989 (all 1-24 wltoys models)

the stock rear part is broken easily, so I found a model and fixed some geometry issue and enforced it. enjoy! here is a small video on how it drives :) and one more updated: just broke the same part on the other model 284131 - and it…

Downloads
84
Likes
14
Rating
0
P
PrintablesPhilipp Dubsky

Wheel Cap for Suzuki SJ413 / SJ 410

Wheel Cap Replacement for Suzuki Sj413 or SJ410

Downloads
84
Likes
9
Rating
0
P
PrintablesK3NPrusa

WLToys - Work/Display Stand (K969, K989, 284131, ...)

WLToys - Work/Display stand Introducing the ultimate display and work stand for your 1/28 WLToys RC car! Designed for both hardcore enthusiasts and casual tinkerers, this stand is like a throne for your miniature speed demon. This stand…

Downloads
82
Likes
15
Rating
5
P
PrintablesVinum Aularum

Logitech G413 Feet

After an bad round of csgo, it might happen that you need new keyboard feet… Support: Yes Layerhight: 0,1mm Material: PLA, PETG You need to mirror one in your slicer of choice. I glued a rubberstripe to the feet. There is a extra cutout…

Downloads
78
Likes
7
Rating
5
P
PrintablesMurdogk

lego 6231 4865 23969 93095 23950 30413 91501 4864 14718 2362

lego 6231 4865 23969 93095 23950 30413 91501 4864 14718 2362

Downloads
75
Likes
2
Rating
0
P
Printablesj3zm0n7e

4mm x 25mm ptfe cutting jig for the e3d revo micro shroud mod 139413-prusa-mini-revo-micro-upgrade

a ptfe 4mm x 25mm length cutting jig for the 139413-prusa-mini-revo-micro-upgrade. Insert a piece of filament into the PTFE tube before cutting to avoid squashing the PTFE out of shape. make sure to cut the ptfe using a SHARP blade for a…

Downloads
73
Likes
7
Rating
5
P
PrintablesRvdH

Wago 221-413 Fusion 360 Model

Wago 221-413 Fusion 360 Model, ohne Innenleben

Downloads
72
Likes
10
Rating
0
P
PrintablesJuli15

Wago Mount for 221-(412, 413, 415) (Modular)

A Modular Screw Mount for Wago 221-412 (2-conductor), Wago 221-413 (3-conductor) and Wago 221-415 (5-conductor). Includes vertical and horizontal mounting options. The Modules can be connected freely, every modle is compatable with every…

Downloads
72
Likes
8
Rating
0
P
PrintablesMucusLaser

WLtoys 284131, k989, k969 Rims and Tires

Here's some wheels and tires for the WLtoys 284131. I printed the rims from PLA and the tires from 95A TPU. They get significantly less grip than the stock rubber tires which is fun for indoor drifting. I included some larger rims and…

Downloads
71
Likes
16
Rating
0
P
Printablesmaddindj42

Wago 221-413 2x + 415 2x Screw

Changed one side to fit Wago 221-413.

Downloads
69
Likes
24
Rating
0
P
Printablesmakes_stuff

Dual Wago 221-413 Vertical Mount

I designed these for use underneath my model railroad where I run several power buses and often find it useful to splice wires into the bus without having to solder or use finicky suitcase connectors. Print vertically without supports -…

Downloads
67
Likes
12
Rating
0
P
PrintablesSteve Stewart

3030 Extrusion Mount for 2 Wago 222-413 Blocks

Requires 2x M4 x 12 Socket Cap screws + nuts and 2x Drop-in T nuts to mount to frame. I used these T-nuts and worked perfectly - https://www.printables.com/model/117699-drop-in-t-nut-3030-profil-m3-m4-m5

Downloads
65
Likes
10
Rating
0
P
PrintablesCitywrecker

PCT-412 413 414 415 DIN mount (Good WAGO Style Lever-Nut from AliExpress )

Simple a DIN rail mount for the PCT-41x (412, 413, 414, 415) WAGO Style Lever-Nut from AliExpress. I have found these to be a good lever-nut. Thanks to yahbluez for the original design and concept

Downloads
64
Likes
4
Rating
0
P
PrintablesM

Wago Back to Back 221-412x2 + 221-413x1 Clip

Use m3 screws mount up enough Wagos to bring single phase mains power into a project box. The three way connector covers connecting the chassis to ground. The mount holes are 27.5mm apart (compatible with the V connector mount holes)…

Downloads
63
Likes
13
Rating
0
P
PrintablesHamzaCinar

LOGITECH G413 - Keyboard Latch | Tastatur Klinke / Hebel

Literally the latch of my new G413 broke because i stressed my keyboard too much. Bending over and over of the latch, caused the start of typical white stripes on the plastic over time. As the demand appeared i reverse engineered the…

Downloads
62
Likes
8
Rating
0
P
PrintablesLegoRJ35

Wltoys 284131 Drift wheels

I created drift wheels for the Wltoys 284131 because the original wheels weren't performing well for drifting on smooth surfaces. Recommend V5. Recommended print settings: Use TPU, no infill, and 3 wall layers for optimal results.

Downloads
61
Likes
13
Rating
0
P
PrintablesM

Wago 2 x 221-412 + 1 x 221-413 angled V clip mount

Edit: In the end, I found the V shape inconvenient, when wiring into it from straight above it was too easy for wire tension to pull the Wago connector loose. I still consider this useful (and cool looking) as a loose hookup wire…

Downloads
58
Likes
9
Rating
0
P
PrintablesLPE

Mount For 2 pcs Wago 222-413 blocks

Wago 222-413 terminal block mount, that holds 2 pcs side by side.

Downloads
54
Likes
5
Rating
0
P
PrintablesMateking

Junction Box for Wago 221-413

I have attached the F3D file too so changes can be made easier. Thanks go out to the OG Author Maker Bit. Absolute Legend for including .step files. Made it so much easier to edit. I wish the hobby would start migrating away from .STL…

Downloads
52
Likes
8
Rating
0
P
Printableshomegeek

8K0941309F1 - Audi rear level sensor adapter

My rear-level sensor recently broke. I didn't feel like buying a new one. Super quick fix. I designed and printed this adapter. The usual failure point is when the bottom ball joint (connected to the suspension) seizes, and the metal rob…

Downloads
51
Likes
3
Rating
0
P
Printablesk1n3k

Suzuki Samurai/Jimny/Sierra SJ413 Rear frame and tailgate scan

This is the rear scan of a 1988 Suzuki Samurai. Should be the same as a Jimny and a Sierra. I took this to design a bumper for it, and it should work for other needs as well. If you design something cool with it, share a pic!

Downloads
48
Likes
7
Rating
0
P
PrintablesMucusLaser

WLtoys 284131 FPV Mounting

Here's a bunch of parts to fit the WLtoys 284131 1:28 scale RC car with an FPV camera, video transmitter, and battery. The camera is a Foxeer Razer Mini, the video transmitter is a SpeedyBee TX800, and I used RDQ Series 1S 850mAh 60C LiHV…

Downloads
47
Likes
13
Rating
0
P
PrintablesNiz

Dometic RM8XX fridge door button 241326032

This design is a replacement part for the dometic fridge door. The part was not available anyware, so I designed my own. RM8XX Works on RM (S)(D) 8501, 8505, 8555

Downloads
46
Likes
5
Rating
0
P
PrintablesBotRen

Piedino Tastiera Logitec G413 SE

Piedino Tastiera Logitec G413 SE

Downloads
46
Likes
1
Rating
0
P
PrintablesMx3D

WAGO221-413 holder

WAGO221-413 holder for 2 pcs on profile 2020 We liked this holder, but it was necessary to adjust the dimensions for the 413 version. Print from ABS, ASA, PC or PA (CF)

Downloads
45
Likes
6
Rating
5
P
PrintablesJori Helin

Spacer sleeve 357864133A

Volkswagen AG Spacer sleeve 357864133A for multiple cars. List for the cars can be found from: https://www.oemvwshop.com/357864133a-spacer-sleeve-p380651/ Print ABS, PETG or PA66 One side has chamfer to make model printable without…

Downloads
45
Likes
1
Rating
0
P
PrintablesLiam Arthur

Suzuki SJ413 - Sun visor hinge bracket

Printed in Ender PLA 0.16mm layer height with 30% infill and zig zag supports in cura. 1hr 38 min print time and 10g 1.75mm PLA (3.42m)

Downloads
44
Likes
5
Rating
0
P
PrintablesBotRen

Tasto F1 Tastiera Logitech G413SE

Tasto F1 Tastiera Logitech G413SE

Downloads
44
Likes
3
Rating
0
P
PrintablesStephen

Thule 34139 Wheel Cradle Wide

Should support up to a 3" wide bike tyre vs the 2.2" with the standard rack. Also slightly longer to help support bikes with a longer wheelbase. I used a Blu Tough resin by Siraya Tech to print this which appears to be quite strong.

Downloads
39
Likes
1
Rating
0
P
PrintablesSkipLegdays

Voron 0 Wago mount 413 1515 extrusions

I liked the cable management in my V2.4, which is why I adapted the Wago mount for the 1515 extrusions. Since there is little need for multiple 24V cables, I modified it to accommodate two Wago 221-413s, providing at least one spare 24V…

Downloads
38
Likes
2
Rating
5
P
PrintablesAnton3006

Wago 221-413 mount 4x

Quickly remixed schellek's wago mount as I needed four connectors.

Downloads
36
Likes
4
Rating
0
P
Printablesk1n3k

Suzuki Samurai/Sierra/Jimny SJ413 bed area scan

A scan of the bed area of a Sj413. The poor thing is a bit hammered but its what I have to scan so I scanned it! It should help you design some stuff to bolt into the rear. Its a early 1988 samurai, should be the same as a Jimny and…

Downloads
35
Likes
5
Rating
0
P
Printablesllluis
Downloads
33
Likes
6
Rating
0
P
PrintablesNick Minchin

Wagner Paint Sprayer - 800mL Container and Lid - 0413909 - W100 W150 W200 W300 Series

Container, lid, and lid gasket (print in TPU) to suit Wagner Paint Sprayers, series W100 W150 W200 W300 (e.g. W350 which I have). I would highly recommend sealing the inside of the container with epoxy resin. I used 24g resin and 8g…

Downloads
32
Likes
3
Rating
0
P
Printablestungster96

Voron Side fan support mount for 3x WAGO 221-413

I wanted to use Noctua's 5V PWM fans with my LDO Leviathan board, and in order to save space on the DIN rails, I wanted to use the Wago mount designed by Dr-Info. However, the mount only holds 2x Wago 221-413 terminals whereas I needed a…

Downloads
29
Likes
6
Rating
0
P
PrintablesKuraiko

Wago 221-413 mount for a Rancilio Silvia

Mount for two Wago 221-413 that can be installed on the original cable relief of a Rancilio Silvia espresso machine. Printed in PLA, 0.2mm, 15% Infill and no support. Print it on the side with the two hex holes

Downloads
27
Likes
6
Rating
0
P
PrintablestraviSS396

Wago 221 PD Base 413 4 Bolt Remix

Works great! Good luck!

Downloads
26
Likes
5
Rating
0
P
PrintablesNathan Milton

Lego Wheel Rim (15413) (49.5x20)

A rim for the #15413 lego wheel that has a diameter of 49.5mm and width of 20mm with a 5mm axle hole. Originally made for a A2212 motor with a 5mm shaft. You can easily go into the FreeCAD file and change the axle hole size. Printed…

Downloads
24
Likes
4
Rating
0
P
PrintablesErwinDesmond

Satsana Dual 5015 Fan Duct for Ender 3 / CR-10 (with Wago 221-413 post)

Eric Anastas's great fan duct, but i lacked a place to put a Wago connector for ease of maintenance in the future. So i added a post that allows me to glue/epoxy a wago 221-413 on it more securely. At first i just used a bit of glue on…

Downloads
24
Likes
2
Rating
0
P
PrintablesAndréG

WAGO 221-413 / 221-415 mount 90 degrees

90 degrees Wago 221-413 / 221-415 mount for 20 mm extrusions. 90 degrees 3x Wago 221-41 mount vor 20 mm

Downloads
23
Likes
3
Rating
0
P
Printablesmi.strz

Wall housing for 12V 80W LED power supply, SMART LED 4132. Obudowa ścienna zasilacza LED 12V 80W, SMART LED 4132.

Wall housing for 12V 80W LED power supply, SMART LED 4132. For wall mounting with screws. Obudowa ścienna zasilacza LED 12V 80W, SMART LED 4132. Do montażu na ścianie za pomocą wkrętów

Downloads
21
Likes
2
Rating
0

[OEWC] Wago 221-413 Clip Collection

Clip/ Fix your Wago 221-413 connector to Holes, Edges or Cables. Also keeps the levers closed. Use a cable tie for strain relief. Features models for: Free wiring / 3mm holes Edges left and right Vertical cableties Horizontal Cableties…

Downloads
20
Likes
5
Rating
0
P
PrintablesMartin

Logitech G413 TKL SE Cable Strain relief

Cable relief designed to prevent strain on the G413 TKL SE USB cable. Material: PLA Layer height: 0,12mm (or smaller) Estimated model printing time (0,10mm layers, PLA, P1S): 17m40s *(note): Don't forget to split the main STL or STEP file…

Downloads
20
Likes
5
Rating
0