One print 8 MicroSD + 3 SD card box (4x4x3cm)
4x4x3cm SD card box with hinge
- Downloads
- 454
- Likes
- 59
- Rating
- 5
591 models
4x4x3cm SD card box with hinge
A single Hex bin with 4 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Requested by @CG485_1311834 Look at my other HexBin's here:…
Holds 25 spools of thread that are 30mm diamater. Will be designing more sewing and crafting related Gridfinity bins. Organizing the sewing nook in our house with a combination of Gridfinity and Multiboard. Reuploaded version 1 to better…
4x4 Brick that works with Lego system. Turns/Spins. Requires some force to break loose the turning feature post-print. Printed in 0.15mm with PLA.
Designed this to mount an aftermarket ESC in my 4x4 Rustler (Hobbywing Xerun XR8 SCT in my case, let me know if you try some others so I know which do/n't fit). I printed mine in PETG, but PLA will probably work fine too.
4x4 Matrix Button Keyboard with numbers, letters and symbols
So far happy with the looks and takes about 55mins on the mk4 @ .2mm Speed setting. Not sure how the color will hold up but thinking that I can paint them if the sun bleaches them too much.
Some tweaking for the rim on add slot to have more grip inside the tire and make it bigger than the original for about 3mm so can get more tight i use the 1.9/107mm inch tires Hope this help Big Thanks for the 3d sets
A mounting solution for the Hobbywing Max10 SCT in a Traxxas Stampede 4x4 with the stock chassis. This design has 3 parts; a base plate, a step (to keep things level) and then a holder that keeps the ESC and switch in place. 2 x M3 6mm…
This is just one box of a bigger system with more than 80 variants in size and partition. Find the whole overview here. compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link above…
I present to you a 54x44 square cells, orthogonal maze. The entrance is at the top and the exit is at the bottom. The maze is a little bit hard to solve, but the time to solve it is worth it. The total maze size is 240x200x11mm. There is…
Gridfinity - Memory Stick Holder (4x4x4) Made this holder that stores memory sticks/usb drives/cards on a 45 degree angle so that they fit in a shallower drawer.
Fence post cap for planters that can support any item up to 10.5" round footprint. fits a 4x4 post snug, has 4 small notches for nails/screws for added support. Drains well and wont flood your planters in heavy rain, and it has an inner…
A while back, I 3d printed some Puzzle Cubes posted by user j1m1sh on Thingiverse (link here ). I also printed his cage base for displaying the puzzle. The base worked fine, but I always found it a bit hard to handle and use as it wasn't…
Note: the coned center section design saves print time (prior design required individual deposition points for 12 tiny dots that often failed, but that are eliminated here) and provides the strength needed to eliminate the vertical links…
IKEA Skadis compliant wall panel with 6x6, 5x5, 4x4 holes and other sizes. The standoffs are 25mm. The front will be 30mm from the wall. Mounted with 4x screws, ideall sunken head. Print with 10% gyroid infill, 3 top, 3 bottom layers, 3…
G wagon - True scale model After months of designing and testing, The design is finally ready. A Performance RC model with offroad capabilities. The chassis has ~150 printed parts. Join our : Discord The body for this Chassis can be…
Rancher 4×4 – 3d printable set of parts for your 3d printer. Model is approx. 53 cm long (1:8 scale) and is prepared for your RC equipment. You can buy this model on www.3dsets.com What you get: 3d printing files: .stl and .gcode…
🆕 Available on Etsy, from me, with free shipping These are 1:10 scale recovery boards for RC crawlers and other toys. I really made these for a fridge magnet but folks at Etsy loved it for the detail. I am sure the community here on…
Garbage Bin - 24x24x45 cm Consider following me on Instagram I post all of my projects to build a portfolio of my projects. https://www.instagram.com/smackmax_/ Fully Printed Waste Bin Tub under needs a bit of support 240 x 240 x 450 mm…
This 3D-printable model draws heavy inspiration from other 1:12 and 1:16 scale models. Every component was designed from the ground up specifically for 3D printing. Not much into RC's? Check out this flexible rolling chassis instead!…
Summary sliding puzzle 4x4 print in place there are 3 versions: with 0.15, 0.2 and 0.3mm gap. to make it easier to move the stones, i recommend applying 1 drop of silicone grease to a cotton swab and carefully wetting the sliding points…
This is an improved version of my previous paint holder, having two advantages: a) can be printed without any support b) vallejo-paint bottles can be stored head down at all positions - this is especially helpful if the bottle gets close…
G wagon - True scale model After months of designing and testing, The design is finally ready. A Performance RC model with offroad capabilities. Join our : Discord The Chassis for this model can be downloaded here:…
4x4 Off Road Car Model This time, I'm presenting a 4x4 car model. In my opinion, the best way to print it is in a vertical position. But maybe someone has a different idea. Removing the supports takes a bit of effort, but I think it's…
Simple Gridfinity bin. The name of the objects are the dimensions, for x and y and the height. The height is a multiple of 7mm: 2 = 14mm 3 = 21mm 4 = 28mm 6 = 42mm The x and y are multiples of 42mm: 1 = 42mm 2 = 84mm 3 = 126mm 4 = 168mm…
For the rails use the V12 rails from @Paul_318082 https://www.printables.com/model/440401-under-desk-drawer Update 15-5-2023: Update the drawers to V12
U původní mřížky byly zámky na můj vkus až příliš volné, upravil jsem tedy přesnost zámků, těsnost políček pro dlaždice a trochu snížil výšku oddělujících křížků. Díky moc za původní model, který jsem jen lehce dotvořil ke své…
○120mm extend to switch from a 4WD to a 6WD See instructions (pdf build guide file)
Based on the work of ZackFreedman .
This is a 4x4 puzzle cube. It's very hard because the pieces are big and very unique. Piece 2 needs support I made a much harder 4x4 cube wich also doesnt need support. check this model out:…
Collection of screws (ISO 4017 / DIN 933) including : M4x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I…
Two options for attaching back (cleat) CA glue. Designed with a mating registration surfaces to locate horizontally in the center and to give lots of strength for almost all purposes with just CA glue Hardware, made for ¼ bolts 2 x ¾"…
Very simple enclosure for a 4×4 membrane keypad. Started as a test-print to check if I have the dimensions right. OpenSCAD files are included. Perhaps you find this useful for your own projects. Print instructions The screw holes are…
Stand for 3Dsets Jeep Rancher 4x4 & Landy 4x4 & Bamboo 10/2/2020 - addes v2 upper part for much more stability 13/2/2020 - added v2 middle and bottom part, can now be screwed together 2/10/2023 - adde middle R-20 part for compatibility…
https://youtu.be/aHf-W1n8ITU?si=BQhXFbC39kVWgMhv Check out my profile for the rear axle and all the other parts. -You will need M3 Nuts and Screws in 10, 12, 16, 20, 25, 30 and two in 55mm lenghts. -12x18x4mm bearings. (Just buy 20 or so,…
Battletech stackable miniature storage tray 4x4, Stores 16mechs. Trays stack on each other Its stacking compatible with the 5x5 REG tray Fits all mechs if you want more storage density consider the 5x5 REG tray Doesn't stack with Small…
I just want to say that these really do fling dirt / rocks / gravel behind them in a HUGE arc. These tires are not good if you are around anyone who does not want to get peppered with rocks and dirt. These can easily fling rocks 30 feet…
Collection of screws (ISO 10642 / DIN 7991) including : M4x 6, 8, 10, 12, 16, 20, 22, 25, 30, 35, 40 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would…
A simple 4x4 half height Gridfinity tray with “corrugation” to keep tools separated. This was designed to hold tweezers and other short-ish tools. Tools are separated by a series of ridges. Half height to make for easy stacking.
EDIT 2 Here are the 0.85" wide rims and tire for the front of your 2WD if you want that dune buggy look. EDIT 1 I added rim design 011 through 014. I also slightly modified rim 008 by adding an 0.030" fillet on the top edges. ORIGINAL My…
This mod only works with the [Cheater B540C transmission] included here. [B] is the gear ratio [540] is the motor mount, [C] stands for Clearance. If you are serious about crawling a Thumper model, this transmission and frame setup…
A difficult little 4x4 cube puzzle that I myself cant seem to solve even though I'm the creator. Please share if you find the solution.
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
This is the updated V3.3 Version of the 16 BIN (4x4) 6U Gridfinity Box for Stuff. This is designed to fit on an Ender3 size bed (the footprint is 196x214mm). This is 16 bin version of the 20 bin Gridfinity Box For Stuff. See the 20 bin…
I present to you a 54x44 square cells, orthogonal maze. You have to start from center and the exit is at the bottom. The maze is a little bit hard to solve, but the time to solve it is worth it. The total maze size is 240x200x11mm. There…
Notes: The G-code included below is designed for maximum durability which makes it quite pricy. For a cheaper alternative, you will have to slice it yourself.
Optional fan enhance the cooling of the brushless motor compartment. Just slide-in the fan into the motor shaft.
Refreshing our old deck, floor planks are still in good enough shape but they have shrunk, and 4x4 posts have twisted a bit over time. Adding trim pieces at the bottom of the posts makes them look cleaner. I didn't want a model that…
this is my v2 of my 4x4 Puzzle Cube, wich is much harder, because the pieces create only one solution. I added the Burrtools solution file. I scaled the model 200% up to make the pieces bigger
Jack for 3D Sets Landy 4x4 RC model 1:10 scale
A little box i designed for Volcano and classic E3D nozzles. Split the stl in your slicer before printing if you're using v6, otherwise use separate files for lid and case. Print instructions Category: 3D Printer Accessories Print…
Disclaimer: Please ignore the bad print quality in both the photos. Bargain basement silk filament kept clogging/partially clogging the nozzle in first print, in second print the parts fan died causing warping, and ironing the surface…
Welcome to another functional design by Nodus 3D . This Heavy-Duty Hinge Set is engineered for maximum strength and smooth operation. Designed precisely in Fusion 360, these hinges feature countersunk holes for a flush, professional…
Overview This is a drawer that adheres to the gridfinity ethos as closely as I could handle: It has a 4x4 grid on the top, in the drawer, and on the bottom, so: They can be fitted to a gridfinity base, or be used as the base The drawer…
Stand for 3dsets.com Landy 4x4 Wagon modified upper part for better vehicle balance and better fit slightly wider stand footprint for improved stability Print instructions 0,3 mm layer height, 3 perimeters, 15 % gyroid infill.
This is a baseplate for Gridfinity system to screw it down to a wooden surface using small wood screws. I modified the screw holes with chamfers to allow usage of little countersunk wood screws 2,5x10. It is a remix based on…
possibilité de l'imprimer en 2 couleur
This is the 4x4 Crawler Exclusive Edition set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the…
This file is a more rigid servo arm for the Rancher. The Rancher itself is NOT part of this assembly! If you want to print the Rancher, you will need files from third party as well. Files can be found at 3dsets.com. The Rancher has 4x4…
Toyota 4x4, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better detail.…
The game is played on a 4×4 board. There are 16 unique pieces to play with, each of which is either: tall or short light or dark (or one of two unique colors) circular or cross hollow-top or solid-top Players take turns choosing a piece…
RC Stand for Traxxas Slash 4x4. Included are both HCG & LCG Chassis Stands. HCG may still need some tweaking. LCG is complete and the bay has room for the Traxxas EZ Peak+ ID Charger. I had previously uploaded this with logos but had to…
These models are reverse engineers of Sortimo "T-Boxx" bins. I have uploaded individual STLs for 1x1-4x4 boxes, I will probably upload up to 6x6 later, but the standard Prusa size printer can't even print a 4x4. They work well for one-off…
Keychain of the legendary panda 4x4 car
just finished working around my parents house repairing an adding to there front porch. we added a hand rail and instead of going out a buying a post cap i used tinkercad to make this. i made them a few different sizes but i used the 50mm…
In the Carcassone is a game requiring players to build a custom map by laying tiles one next to another. This grid helps keeping the map in case of any "accident" - perfect for playing with children. The model is fully customizable (with…
These are the latest version (v 2.2) of my lidded Gridfiniy bins, with several improvements over the 1st version. These include the following improvements and new elements: Fully redesigned bins with a more efficient use of material…
This is an extended battery mounting bracket, for the Traxxas Slash 4x4 LCG chassis. I designed it to work with my Turnigy Rapid 5500 mah 4S LiPo battery (as you can see in the pictures) Be aware that for this to fit the aforementioned…
3dsets.com Landy 4x4 and Landy 4x4 Wagon modification for LED lights Wheelhouses - modified original mesh, added 24mm holes for lights Rings - to be used instead of default printed lights, push the LED light into it Print instructions…
This is a plain gridfinity bin that is 4x4 and 3 high to hold a CD/DVD drive with a USB cable off the center of it. This was created in onShape, I am just posting it here for simplicity.
This print is a continuation of my design from last year . The actual plow is reusable from one to the other, I just fixed a minor issue where it was accidentally slightly angled up on the right side and added the height adjustable…
I have made a simple case for my deburring tool that fits with the gridfinity system. I designed this so that it only uses the standard 6x2 magnets. the magnets are not the strongest but they hold on tight enough. The magnets need to be…
I tried ESylin's drift wheel ( https://www.thingiverse.com/thing:1334558 ) and they worked great, just wanted some that are a closer diameter to the stock tires so I drew these up. This design is for use with 12mm hexes, which the Slash…
Gridfinity organizer for Spade Drill Bits Check out my other gridfinity creations: https://www.printables.com/@NygaardDesign/collections/1741703
A DUPLO compatible pillar 8 bricks high and 4x4 wide. Visual appearance inspired by a “Ground support” or “Truss tower” from Event / PA technology. Pillars come in handy to easily achieve certain heights. Especially when building a DUPLO…
These objects were fitted on a 2022 Chevy Colorado. They should fit all “Generation 2” 4x4 Colorado and GMC Canyon trucks. There are two versions: Note that the 4x4 Knob Lock object is different in each version and NOT interchangeable.…
For more information please refer to the original printable. Onshape modification studio:…
Printed with a pause at layer 46, to fill it with some small-grained rice. Choose an infill pattern that allows you to fill it up top-to-bottom, like triangles. Print the two parts separately. You probably don't need supports for the…
Notes: Two sets one next to another can not be bridged with single LEGO brick. This is because LEGO is 8mm between centers of the connectors, while Gridfinity is in general multiples of 7mm. So I guess 4x1 gridfinity could work (not…
can be printed without supports in PLA and be connected on the pins with glue
A simple and elegant puzzle for a little brain-teasing. The part orientations are ready to print and you can choose one of three stand designs. Normal difficulty. Printing instructions: No supports required. Layer height: 0.2mm
This is a simple guide to make your own 4x4 sliding puzzle - whether it is a map or not - using Tinkercad, thanks to the model @Nikolaos Babetas uploaded of the puzzle itself without any image on top of it. The aim of this remix is to…
Place over 4x4 box and pull wire through. Prevents damage to the insulation from scraping on the edge of the box.
To print this part, use the same settings as for the original BeltDrive parts. For hot weather use print from heat resistant material (PET-G, etc.).
Simple print to get a flat surface for the ESC in TRX-7422 LCG chassis. Uses same holes in chassis as Traxxas original ESC. I made it 3mm thick, cut it in your slicer depending on how thick you want it. Print Settings Printer Brand:…
I printed it in Nylon (Taulmann 645) and it works pretty well.
I designed this to cap off the 4x4 posts that were used to build a bench as a gift for my mother. The pictures on this model are custom ones with her initials but the files I have included are slightly different. If you would like some…
Small enclosure for the 4x4 Matrix Keypad. The case is 78 mm wide and 77 mm long. The total height of the case is 21.5 mm where the bottom is 20 mm. Hole for wires at the bottom, being 10 x 20 mm. Lid is snap fit, so you it can be a bit…
UPDATE: I created a new and improved version of this model that nests and allows for multi-stacking. It's better than this one in every way - I recommend using it instead. Link to updated version:…
It is a 4x4 plate which is compatible with your normal Lego.
Fence Post Cap Designed to fit a 4x4 post with a 3.5" x 3.5" nominal size. Secures with 2 screws 6x6 Version Can Be Found Here ⚠ Wood swells and shrinks inconsistently. Please measure your post first and compare it with the measure tool,…
This model is now depreciated, please use the new one . Are you tired of clearing your driveway by hand? Is it too small to justify a snowblower or other full scale device? Well now, it can take you twice as long, using your RC. This…
LEGO Ukraine defense industry 4x4 armoured vehicle HORT
Thread faces of the bolt have been reduced by 0.16mm in diameter. So they can freely turn.
New light + cover. You print the cover from transparent filament. I used Nebula natural. Spectrum alu silk was used for the light
I had one of my fence post caps go missing, and I wanted one that would match my others (at least in size and shape) so this is what I came up with. It almost exactly matches the cheap wooden fence post caps that I got at Home Depot. If…
Key for Playskool BIGFOOT 4X4X4 SST Monster Truck I got a Bigfoot for Christmas in 1984! Like most kids I lost the key. :-( So I made new ones. :-) Now you can make your own. The PNG decal file is also included below in a zip file. I just…