Search results: 4x6

Sort order

215 models

P
PrintablesKeldor

Gridfinity 2x4x6 Hex Bin

A single Hex bin with 2 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…

Downloads
365
Likes
61
Rating
5
P
PrintablesKeldor

Gridfinity 4x4x6 HexBin

A single Hex bin with 4 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Requested by @CG485_1311834 Look at my other HexBin's here:…

Downloads
218
Likes
53
Rating
0
P
PrintablesMax666

4x6 AAA Battery Tray Z=16mm

Customized version of https://www.thingiverse.com/thing:48235 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=48235 Print instructions Category: Organization Instructions Using the following options:…

Downloads
179
Likes
12
Rating
5
P
PrintablesCJ

64x64 Matrix Display Raster

The idea is to separate each pixel into it's own "box" this in combination with a diffuser sheet or transparent paper, gives a nice “boxed” effect for each of the 4096 led's. Beware you are not going to print the object, you are going to…

Downloads
55
Likes
4
Rating
0
P
PrintablesKeldor

Gridfinity 2x4x6mm BarBin

Tried to create a more robust design of a 2x4 gridfinity bin. If you need other sizes, let me know! The Bin is 2x4 Squares with a maximum hight about 6cm. The base is created with the gridfinity fusion 360 plugin from…

Downloads
44
Likes
10
Rating
0
P
PrintablesJamehz

Everdell Special Event Card Stands - 44x66mm

Just a few stands for the special events cards. I found that sitting flat on the tree they were harder to read. These keep the 66x44mm cards upright, but are small enough not to block the text. Any filament will do, and you will need a…

Downloads
1,824
Likes
234
Rating
4.93
P
PrintablesTycho Design

M4 Socket Head Screw Collection M4x6-M4x30 ISO 4762 / DIN 912

Collection of screws (ISO 4762 / DIN 912) including : M4x 6, 8, 10, 12, 16, 20, 25, 30 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would recommend…

Downloads
768
Likes
55
Rating
4.5
P
PrintablesTycho Design

M4 Screw Collection M4x6-M4x40 ISO 4017 / DIN 933

Collection of screws (ISO 4017 / DIN 933) including : M4x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I…

Downloads
663
Likes
65
Rating
5
P
PrintablesRadekG

204x60 air vent cover - honeycomb and net

Tried to create something that can be used outdoor. Honeycomb structure is intended to stop raindrops and additional grid should prevent insects from entering throuch holes or nesting in honeycomb. Internal 3x3 net is separated from…

Downloads
617
Likes
79
Rating
4.33
P
PrintablesAnt Ant

4x6 inch Picture Frames

The whole model uses about 90 grams of filament. I do 15% infill, Snug supports along the interior of the frame, no supports on the holes on the back of the frame fillets down on the picture backer. I also use .1mm layer heights to keep…

Downloads
613
Likes
99
Rating
3.5
P
PrintablesQueso_Grande

Honeycomb 4x6" Picture Frame

Based on the design from @Kittelot and trimmed in order to fit on the Prusa Mini. I also removed the center of the backing in order to save on material since it was not required. It fits 4x6" photos nicely! Print Settings: Print with…

Downloads
588
Likes
69
Rating
5
P
PrintablesDylan Kirby

Apache 1800 single NVX 4x6 speaker grill and trim

Designed for the Apache 1800 case, for one NVX® NSP46 4" x 6" driver. .step files are included if you wish to mod them for different drivers. The outer trim requires 6 m4 heat set inserts, and is mounted with 6 m4x8mm screws. The jig has…

Downloads
548
Likes
58
Rating
5
P
Printablesyapiodesign

4x6 Picture Frame

A simple 4x6 picture frame. My daughter needed a picture frame for a school project. Nothing too fancy, just glue or tape the picture into the frame.

Downloads
513
Likes
55
Rating
0
P
Printableshackerbijay

Display mount (Cover)7inch HDMI LCD , 1024x600

7inch HDMI LCD (H), 1024x600, IPS, supports various systems, capacitive touch, supports Raspberry Pi 4. looks good and protected. Display link to Buy:…

Downloads
490
Likes
30
Rating
4.75
P
PrintablesTycho Design

M4 CSK Socket Head Screw Collection M4x6-M4x40 ISO 10642 / DIN 7991

Collection of screws (ISO 10642 / DIN 7991) including : M4x 6, 8, 10, 12, 16, 20, 22, 25, 30, 35, 40 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would…

Downloads
488
Likes
60
Rating
0
P
PrintablesHijinksensue

4x6 Label Printer Stand [for large label rolls]

Remixed this label printer stand to hold the LARGE label rolls I bought off Amazon . Intended for a Munbyn 4x6 label printer, but should work with Rollo and other brands. Added diagonal support to the corners, a lip around the back and…

Downloads
441
Likes
56
Rating
5
P
PrintablesMKLand

Magnet Photo Frame (3.5x5, 4x6, 2.5x3.5, 5x7)

I am so excited about this! I was so tired of my messy fridge and the random magnets to hold up the little photos I wanted on the fridge, so I came up with this simple design. Holds 4 - 6mm magnets. If you have different magnets you want…

Downloads
433
Likes
49
Rating
5

Vase Mode Photo Frames 3x5/4x6

You are going to need to go slow and keep the breeze off the print or it will warp

Downloads
399
Likes
115
Rating
5
P
PrintablesKeksmoment.de

Gridfinity Bin 2x4x6 without magnet holes

Here are some bins for the Gridfinity storage system which I didn't found anywhere. So I designed them by myself. V2: for users whom 1.2mm wall thickness is too small, so I designed it with 2mm wall thickness.

Downloads
398
Likes
19
Rating
4.67
P
PrintablesKiloxTango

Simple 4x6 Picture Frame

I used the presets with supports on build plate only. I included a color change

Downloads
388
Likes
28
Rating
5
P
Printablesnlapenn

Adafruit 64x64 LED Matrix grids

64x64 LED Matrix Grid If you're printing yourself don't use this model!: This is is a really really slow path to printing these since slicers aren't optimized for grids like this. A better option is: Create a 192x192x6mm solid box (or…

Downloads
363
Likes
24
Rating
0
P
Printablestvdu29

Condom Case 3 PCS for 64x64 mm

Designed to hold 3 64x64mm sleeves condoms so they stay protected in your pocket I included my freecad original files if you want to modify or improve this model Printed at 0.3 layer height Have fun and stay safe !

Downloads
347
Likes
27
Rating
4.4
P
PrintablesDylan Kirby

Apache 1800 single polk db462 4x6 speaker grill and trim

Designed for the Apache 1800 case, for one Polk db462 4" x 6" driver. .step files are included if you wish to mod them for different drivers. The outer trim requires 6 m4 heat set inserts, and is mounted with 6 m4x8mm screws. The jig has…

Downloads
312
Likes
40
Rating
0
P
PrintablesAhmad Bin Matar

4x6 photo frame

this is a 6x4 photo frame for canon CP printer and you cane frame with any 6x4 photo You can use pla , pla+ , abs and petg for printing and u need use tree support in the slicer

Downloads
304
Likes
44
Rating
0

LEGO-Compatible Frozen in Carbonite Minifigures – Star Wars - Han Solo and aliens (2x4 & 4x6)

Inspired by the iconic Han Solo in carbonite scene, I designed a series of custom LEGO-style minifigures that appear frozen in carbonite. Each figure is a unique alien character, combining elements from various open-source models shared…

Downloads
302
Likes
81
Rating
0
P
PrintablesSimon Hung

Gridfinity - Apple Watch Band Holder - 3x4x6U - Stackable

Remixed JH3D Apple Watch Band holder to fit with Gridfinity system.

Downloads
295
Likes
30
Rating
5
P
PrintablesGanjew420

klipperscreen Case for 7" 1024x600 IPS touchscreen and Raspberry Pi4

case for 7 inch 1024x600 IPS touchscreen and raspberry pi 4. case uses m2 screws to hold everything together.

Downloads
265
Likes
27
Rating
5
P
Printablesendofturn

4X6 PHOTO CASE ORGANIZER

These fit the Hobby Lobby 4x6 photo cases. I use these to store small board and card games in. Sometimes you need a little organization. They print quickly and don't use too much material.

Downloads
262
Likes
44
Rating
5
P
Printableskemmie

Acoustic panel mounting bracket with threaded heat insert M4x6x6

Acoustic panel mounting bracket for threaded heat insert M4x6x6. For panel size, 13mm width, 10 mm height. Adjustable. FreeCAD 1.0 model provided. Adjust to match your acoustic panel width and height. Also adjust to fit your threaded heat…

Downloads
246
Likes
43
Rating
5
P
PrintablesAzom

A cabinet enclosure for 64x64 LED matrix (3mm pitch) with Adafruit controller.

A cabinet enclosure for 64x64 LED matrix (3mm pitch) with Adafruit controller. The enclosure is suitable for wall mounting. PLA-ST & organic support.

Downloads
237
Likes
22
Rating
0
P
Printableshightekjonathan

4x6 Photo Box

This was a project I made for my wife to deliver prints of wedding galleries' to her clients. It holds a decent amount of prints, or could be used at any type of trinket box. The lid slides freely and has matching radii to match the…

Downloads
231
Likes
32
Rating
0
P
PrintablesHack_n_Splice

4x6 Index Card Display Holder

In need of a desktop holder and display for flash cards or index cards? Look no further! This model was originally intended to hold a pack of 50 dry erase flash cards, with one set in front to display its content. This makes it a perfect…

Downloads
226
Likes
23
Rating
5
P
PrintablesYan1 ALAN

7 Inch Raspberry Pi Touch Screen 1024x600 IPS LCD with Speaker for Raspberry Pi 5 4 3B+ 3B / Jetson Nano PC Secondary Screen case

Link for the screen: https://www.aliexpress.com/item/1005001704445373.html Infill: 20% Filament: PLA, PETG, ABS … Wall thickness: 3. Support required.

Downloads
222
Likes
23
Rating
0
P
Printablesjmar

Photo mat 5x7 to 4x6

I had a 5x7 photo frame I wanted to use, but only had 4x6 photos, so I made this simple model. I didn't see other models like this, so I figured this was worth sharing as inspiration. Someone more artistic than I could add different…

Downloads
206
Likes
3
Rating
0
P
PrintablesShameless Makes

4x6" Shipping Label Bin for iDPRT Thermal Label Printer

After purchasing an iDPRT 4x6" thermal label printer on Amazon, I quickly became annoyed by how messy the stack of labels got sitting off behind the machine as there was no included organization with the printer. They sell a separate bin…

Downloads
194
Likes
22
Rating
5
P
PrintablesLukas

Hose clamp for 4x6mm aquarium air hose

To manipulate the output of the air hoses of my air pump I have designed this hose clamp. It consists of three parts: frame, screw and cap. After screwing the screw through the frame you can screw on the cap. You turn the screw with your…

Downloads
193
Likes
23
Rating
5
P
PrintablesMatB

Vase Mode Photo Frames 4x6 Portrait

Photo frame for 100x150mm photos printable with vase mode.

Downloads
190
Likes
17
Rating
5
P
Printablesharrisonpatm

18650 Cell holder, 4x6, for Spot Welding

Remix of @RinoaLilieu_609203 cell holders. I made the gap between the cell contact and the bottom of the holder much smaller, so nickel strips for spot welding will make much better contact.

Downloads
186
Likes
15
Rating
0
P
PrintablesSt4ge

Pencil holder - bolt M64x6

Easy to print pencil holder. Printable without supports. Nut is optional. Size cca 110x110x120 (mm)

Downloads
167
Likes
37
Rating
5
P
PrintablesAqanta Design

Simple Print in Place 4x6 Picture Frame

A simple picture frame for 4x6 photos. Prints in 1 piece with no supports.A simple picture frame for 4x6 photos. Prints in 1 piece with no supports. Useful for keeping photos straight or mounting them to a wall with sticky putty. Print…

Downloads
155
Likes
9
Rating
3
P
PrintablesDavid C

Gridfinity 2x4x6 for Army Painter paints, 25.5mm diameter Mag+

Requested by Zitheran on Discord. Magnet holes use straight bridging method and should be friction fit. https://www.printables.com/model/379547-gridfinity-magnet-holes-model-for-example-and-tink

Downloads
145
Likes
20
Rating
0
P
PrintablesMax666

4x6 AA Battery Tray Z=16mm

Customized version of https://www.thingiverse.com/thing:48235 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=48235 Print instructions Category: Organization Print Settings Printer Brand: Prusa Printer:…

Downloads
143
Likes
6
Rating
0
P
Printablesstephenp

Stackable Tray Organizer for UPS 4x6 Shipping Labels

This stackable organizer tray is 130mm x 185mm x 35mm (~5" x ~7" x ~1.5") and is designed to hold the drop-off package receipts you get from places like UPS. Designed, so no supports are required!

Downloads
142
Likes
28
Rating
5
P
PrintablesDrHellbenders

Gridfinity Niimbot D11 Label Printer Bin & Spare Label Rolls (3x4x6)

This is a 3x4x6u Gridfinity Bin for a Niimbot D11 Label Printer and three spare label rolls. Also, it's my first model... please be gentle! This remixes the Plain Bin (3x4x6) from @KyleWarren (my absolute favorite Gridfinity bins to…

Downloads
141
Likes
29
Rating
5
P
PrintablesMarcin1415

Hinged 7 inch HDMI 1024x600 Display Case for Ratrig V-Core 3.1 Enclosure 300

My remix allows you to mount the display without interfering with the printer's structure. The display bottom cover has channels for cable clips. Same with 2 chamber plates. Additionally, there is an 8mm hole for passing the webcam cable…

Downloads
141
Likes
42
Rating
0
P
PrintablesDudeMan

Gridfinity for 4x6 Post-It Note Holder

Gridfinity for 4x6 Post-It Note Holder. 3x4u

Downloads
140
Likes
22
Rating
0
P
Printablesatucom

Thin Photo Frame - 4x6 Photos

Simple design to give 4x6 photos a thin border frame. Photo is inserted from a top slot and sits snugly. For printing: Orient with slot facing upwards (so it's standing straight up) Have a brim/raft since they are so thin Paint on…

Downloads
140
Likes
6
Rating
0
P
PrintablesHrumque

Frame for LED panel P3 64x64pix 192x192mm P3(2121)-32S-192x192-v8.1

Frame is divided to 5 parts: - (blue dark and light) 2 corners (you need at last 2 + 2 of it) - (pink and red) edge+side, for edge connecting every two panels, - (yellow) cross, for center connection (when you make more than one row of…

Downloads
137
Likes
15
Rating
0
P
Printablesmtramontana

Dumpster Inspired Recipe Box (4x6 cards)

Dumpster Inspired Recipe Box (4x6 cards) This is the first file I've uploaded to Printables! Dumpster inspired recipe box with hinge lid. All original custom design built in OnShape. Groove in lid props up recipe card at the perfect…

Downloads
130
Likes
37
Rating
5
P
PrintablesEmpiricus

Mamiya RZ67 PAN 24x68 Finder Mask

Finder Mask for framing 24x68 format images with the RZ67. Works with waist level or RZ67 AE prism finders. Printed in PETG and 0.15mm layer height with a 0.4mm nozzle.

Downloads
127
Likes
12
Rating
0
P
PrintablesSixpack99

Basic Picture Frames for 4x6, 5x7

The trim pieces can be printed in a different color from the backing if you wish, since they are separate pieces. Just use CA glue to join the pieces together and then (when dry) slide the picture into the thin slot on top. If you use the…

Downloads
120
Likes
14
Rating
5
P
PrintablestraviSS396

Flag Pole for 4x6" Stick Flag

These 3 parts should print no problem, the topper has an angled ceiling inside. The holes in the pole lined up with the staples in the flag i had. I glued new staples in. I didn't have a better topper color, I wanted gold. I imagine all…

Downloads
120
Likes
7
Rating
5
P
Printablesxls38

Photo Keeper Game Caddy FIX for newer 4x6 photo storage containers

This is a negative volume model to use with all the great models for game inserts that were built for older 4x6 photo keeper cases. Easy to apply within the PrusaSlicer and 3D-Builder. As of 2024, all the available photo storage…

Downloads
120
Likes
19
Rating
0
P
PrintablesElElf

LED Matrix 64x64 housing

This is a housing for a 64x64 LED panel common on the elektronic market with enough space for powersupply and the IoT control unit. Here is used to display temperature and whirlpoolstate of a HotTub. The display is conrolled by a Raspian…

Downloads
120
Likes
9
Rating
0
P
PrintablesTwirlygrlandMom

Grass Lawn Frameless Photo Stand - Father's Day Picture Frame, Gift, Memory Keeper fits 4x6" photo, easy print

My grandfather was always meticulous about his lawn. My grandfather was known for being strong, dependable, honest and loyal. He was well known for arriving at least 30 minutes--more often an hour--early for any planned event. He was…

Downloads
120
Likes
26
Rating
5
P
PrintablesAlex Pinson

4x6 Mailing Label Storage Bin

Storage box for 'fan-fold' style thermal printer shipping labels. You can print directly out of this box, and the box features an approximate scale on the side for checking the remaining number of labels. Meant for a maximum of 500 labels.

Downloads
113
Likes
14
Rating
5
P
PrintablesSasho Boyanov

Frame for Picture 10x15 - 4x6

you can use vertical or horizontal picture frames. To puncher letter Use Creality Print or any other software you like.

Downloads
112
Likes
13
Rating
0
P
PrintablesZitheran

Gridfinity 2x4x6 for Army Painter paints Stackable, 6x2mm Magnets

I added beveled holes on the bottom of each paint spot to allow for stacking.

Downloads
106
Likes
9
Rating
0
P
PrintablesRewster

4x6 Inch Photo Box Insert Templates

This post is for template models to make inserts for this Photo Storage Box from Amazon. I've found it to be perfect for consolidating small board games with oversized or inconsistently sized boxes that clutter up the shelf, but they are…

Downloads
104
Likes
27
Rating
0
P
Printablesnico

124x64 2.42" OLED + ESP32 D1 Mini Case

Case for 124x64 2.42" OLED display powered by ESP32 D1 Mini Use 2 mm screws.

Downloads
103
Likes
7
Rating
0
P
PrintablesPotato Stardust

Compact double action latch for 4x4x6 boxes

Latch remix for lower profile boxes. Not as pretty as the original but function the exact same.

Downloads
100
Likes
16
Rating
0
P
Printablesmell0w

4x6 Dactyl Draft (Work In Progress)

Uploading for personal use. Currently has errors (invalid oriented triangles). Not finished.

Downloads
99
Likes
21
Rating
5
P
PrintablesSnowZA

4x6 cap-retaining tube rack for stickered microcentrifuge eppendorf tubes.

The lab where my wife works got a new automated pipetting machine, and the tube rack that is available for that machine is apparently a nightmare to use. I made this version for her based of the design used in another machine. The rack is…

Downloads
98
Likes
13
Rating
0
P
PrintablesJan

photo frame 4x6" 100x150mm 10x15

Self standing photo frame, vertical or horizontal. Easy to print without supports. Material PLA or PETG. Printing time 26 minutes, filament 7.37g

Downloads
97
Likes
8
Rating
0
P

Dactyl 4x6 trackball

mirror bot_nomal, pro_micro_adapter for left, right mouse sensor using ADNS9800 need 50 switchs, diodes, hotwaps ( kailh, gateron or something else) firmware is QMK, can use Promicro atmega32u4, blackbill stm32f401, RP2040.... Ball is of…

Downloads
97
Likes
33
Rating
0
P
PrintablesPhillip Snyder

2x4x6 Gridfinity Tray - No Magnet Holes

My printer doesn't like the magnet holes, and I printed a magnetless Gridfinity. Whipped this up with the use of the Parametric Web Generator.

Downloads
96
Likes
9
Rating
5
P
PrintablesDiabeetoh

4x6 Photo Stand

I needed a simple fast print to allow me to “stand up” 4x6 photos on an ikea floating shelf. The shelf has a front lip that hides the photo stand so that the photos appear to be floating. Modeled in FreeCad Printed in PLA ~20% infill, 2…

Downloads
95
Likes
12
Rating
5
P
PrintablesTica

Gridfinity 2x4x6 paper money holder

A bin to hold paper money, functional Dose not require any supports. I've used PLA, but any material should work. The bin: Paper money It has 3 slots, to allow the keep of 3 different paper types Its sloped to fit in shallow drawer Has a…

Downloads
94
Likes
8
Rating
5
P
Printablesandyfavors

4x6 Portrait Desktop Frame

I couldn't find a frame that I liked so I made my own! First time designing anything other than very basic stuff. Although this is basic as well, it's a still an achievement for this old man! Print Settings Printer: FLSUN Super Racer…

Downloads
94
Likes
7
Rating
0
P
PrintablesAWSW

64x64 matrix holder

Simple 64x64 matrix holder with integrated open case for an ESP32 with some holes for wiring, cable ties and 3 wall hanger holes for nails or screws. Printing instructions: 0.3 draft profile No brim or supports used Steel Sheet used Happy…

Downloads
94
Likes
14
Rating
0
P
Printablesmachineica

6054 / 5x7 headlight to 4x6 adapter

I wanted to fit some 4x6 lights i had on hand to my 92 Toyota with 5x7 or 6054 sealed beams. These are adapters with no retention currently because i had planned to epoxy the 4x6 inside them. I will release a version with bolt on…

Downloads
94
Likes
9
Rating
0
P
PrintablesSeby's Garage

Wrench holder for Tekton 14pc metric adjustable set - Gridfinity 4x6

Gridfinity 4x6 tray for the Tekton 14pc Metric ratcheting wrench holder, part# WRC94302 . I made this as small as possible to fit in my toolbox. Note that the wrenches' bends seem slightly variable so I am attaching the design file in…

Downloads
93
Likes
21
Rating
0
P
PrintablesFrozengeek1

4x6 wall picture frame

This is a simple 4x6 picture frame made to hang on the wall from a standard drywall screw.

Downloads
91
Likes
9
Rating
0
P
PrintablesPILED

4x6 Postage Thermal Label Tray Box & Clip

Label Tray, box and clip for 4x6 thermal postage labels. Use STEP files for best speed and quality. All of my functional 3D models are available on Thangs.com https://thangs.com/designer/PILED Visit https://piledltd.co.uk/ for more

Downloads
91
Likes
9
Rating
5
P
PrintablesCajun_Einstein

Polk DB462 4x6 Spacer and Grill for Apache 1800 Case

Printed grill down, with minimal supports. Printed spacer with case side down with minimal supports.

Downloads
86
Likes
9
Rating
0
P
PrintablesJohn Turner

Matrix Panel HUB 75 2.5mm pitch 64x64 bracket

Here is my design for an inside corners bracket to secure 2 or more HUB 75 Matrix panels together. My panels came from Adafruit - they are from Waveshare I believe - Mine are 64x64 but they probably work on the 32 x 64 as well. I used 2…

Downloads
84
Likes
9
Rating
0
P
PrintablesRnBck

Waveshare 64x64 LED Matrix & Raspberry Pi (2, 3, 4, Zero) Housing / Wallmount

Housing/Wallmount for Waveshare 64x64 LED-Matrix and Raspberry Pi/Zero The Waveshare LED-Matrix can be screwed to the Wallmount and covers the Raspberry Pi inside. You can either use Raspberry Pi 1, 2, 3, 4 or a Raspberry Pi Zero. On the…

Downloads
83
Likes
3
Rating
0
P
PrintablesKenndowl

Gridfinity Long Cotton Swab Holder (1X4X6)

Gridfinity 1X4X6 filed box modified to hold long cotton swabs. Part of a set of several items I modified to better organizer my firearms cleaning supplies.

Downloads
83
Likes
10
Rating
0
P
PrintablesKiwiBanana2312

4x6 headlight bezel trim ring

Headlight trim ring for a 4x6" sealed headlight. This is the bracket that holds your sealed headlight in place against the bucket. There is some room for error in the corners to compensate for small variations in the glass of the…

Downloads
80
Likes
6
Rating
0
P
PrintablesHi_Im_Dave
Downloads
77
Likes
11
Rating
0
P
PrintablesOBA

Stackable Storage Box 184x184x60mm with ventilation

Motivation [ storage boxes for tomato ripening ] During a vacation in France I bought fruit in nice stackable wooden boxes, which I now use for ripening tomatoes on a window sill. As the boxes are stackable, only little space is required.…

Downloads
75
Likes
45
Rating
0
P
PrintablesSteve Six

Jiose 4x6 Thermal Label Printer Tray

This is a tray to hold the 4x6 labels that are used for my Jiose thermal label maker, but it should work for any 4x6 inch labels. Prints flat without supports.

Downloads
75
Likes
10
Rating
5

PCB_Tray_143x127.4x6

I made this tray because I did not have space where to store my PCB's before and after assembly. You can store PCB in panel or single PCB and you can stack them if you need. Is easy to print, without supports. Print instructions Printer…

Downloads
75
Likes
42
Rating
5

Hello My Name is Tag 4x6

Badge use either double sided adhesive and attach badge pin or make the lanyard version LETTERS A-Z INCLUDES 1st layer of Badge is at .125 in. final layer is at .25 in Hello text is -.125 from final layer (top) Name text is .25 an should…

Downloads
74
Likes
9
Rating
0
P
PrintablesAlex Henstra

LED matrix 64x64 P3

Case for LED matrix 64x64 P3 and ESP8266 (Lolin v3) Print Settings Printer: Custom CoreXY Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Jupiter PLA Clear Category: DIY

Downloads
72
Likes
0
Rating
0
P
Printablesm_collectable

Single and Dual 4x6 Picture Photo Frame

I had a multi-photo frame that broke, but the glass pieces were still good. I designed these frames to hold those glass pieces; they measured 170mm x 111mm in size. No supports needed for printing when laying them out flat. I printed in…

Downloads
70
Likes
13
Rating
5
P
PrintablesMyStoopidStuff

Magnetic Key Holder with 4x6 Photo frame (for 5 keys)

There are three types of key holders available here. All of them hold 5 keys and use 12x3mm cylinder magnets to hold them in place: Key_Rack-1J Key_Rack-1J-PHOTO Key_Rack-1J-PHOTO-TRAY The tray version can hold several normal pens, and…

Downloads
70
Likes
20
Rating
0
P
Printablesjaakaappi

64x64 P5 RGB LED Matrix frame and feet with Rasperry Pi standoff mount

A frame for two Adafruit 32x64 P5 RGB LED Matrices , controlled by the Adafruit RGB Matrix Hat . Wanted the frame to stand on it's own, so added two feet. The frame holes are M3 and Raspi standoff holes M2.5. Tolerances are a bit tight,…

Downloads
68
Likes
11
Rating
0
P
Printablesswanny

iDPRT SP410/SP410BT top mount 4x6 label roll holder (UPS and Fedex) (w/ flat option)

Stand/holder for the large 4x6 label rolls with 3" ID core you can request from UPS/Fedex for free. Designed to mount on top of iDPRT SP410/SP410BT but also included a flat base version. You need to print two of the rollers, one for each…

Downloads
67
Likes
6
Rating
5
P
PrintablesPhillip Snyder

2x4x6 Gridfinity Tray - Segmented - No Magnet Holes

My printer doesn't like the magnet holes, and I printed a magnetless Gridfinity. Whipped this up with the use of the Parametric Web Generator. Please excuse the dirty bottom, it printed very clean, but I had glued my print surface so it's…

Downloads
67
Likes
11
Rating
5
P
PrintablesSpotmatic

PraktiPan - 24x65mm (XPan) conversion of a Praktica B camera

A conversion of a Praktica B camera to 24x65mm format. This is not a straight forward kit, see it as a starting point for your own conversion. Print Settings Filament: any kind PETG black Category: Camera First light

Downloads
66
Likes
11
Rating
0
P
Printablesrali717

Display-Holder for 10″ Rack ( 7-Inch / USB Touch / 1024x600 / HDMI )

10″ Rack display holder for 7" HDMI Display ( USB Touch / 1024x600 ) FreeCad-File attached.

Downloads
66
Likes
6
Rating
0
P
PrintablesLinearRelation

Modular 4x6 Photo Case inserts

Set of modular bins to go in a standard 4x6 photo case. 3x3 based grid of rectangular boxes, in the STL files the first number is number of units tall, followed by number of columns wide, with a 12 following indicating a half width. for…

Downloads
66
Likes
14
Rating
0
P
PrintablesLee Fleming

4x6 Thermal Paper printer roll for HSW

Should be printed with supports. I used black bambu labs matte PLA on stock 0.2 settings

Downloads
64
Likes
11
Rating
0
P
PrintablesPotato Stardust

Wera 1013 Kraftform Micro Gridfinity 1x4x6 bin

A 1x4x6 gridfinity for a wera 1013 bit holder and 14 bits. Bits can be a little tricky to remove as there is not all that muck space in the 1x4 bins. I printed my model mirrored.

Downloads
64
Likes
10
Rating
0
P
PrintablesSynergyx26

4x6 inch Post-It Note Bin Skadis

An Ikea Skadis bin that holds the 4x6 inch Post-It notepads. It will hold a pack of 5 notepads before going over the top edge. The hook used is the original IKEA SKADIS Universal Hook Set by CSD_Salzburg…

Downloads
64
Likes
12
Rating
1

FHW: 4x6 Project box 10.5mm holes ( somewhere to cram all the wires)

Hello Tribe, Shhh... We are working on a movable power unit box for 12v dc motors. please enjoy Oh side note both the bottoms are the same one just has some text on it. Here is our Sunlu Affiliate link…

Downloads
63
Likes
6
Rating
0
P
Printablestinyledmatrix

64x64 P2.5 LED Matrix minimal stand

Replaces the boot liner blanking plate with a light insert for additional area lighting in the car boot. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution: 0.2mm Infill: 10% Filament: Random China…

Downloads
60
Likes
1
Rating
0
P
PrintablesP1xellat3d

CR2032 and LR44 Button Cell Battery Box (4x6mm Magnet)

Didn't have any 4x1.5mm magnets on hand (and didn't want to buy more magnets every time there's a design to print, so I modified it to fit the magnet sizes that I had (4.6mm cylindrical magnet).

Downloads
59
Likes
11
Rating
5
P
PrintablesZrzyck

Vent duct coupler 204x60

Original ones available in Castorama stores are overpriced.

Downloads
59
Likes
5
Rating
0