Kawasaki Ninja 250R 2008 Wall Art
Wall Art Silhouette model of the Kawasaki Ninja 250R 2008 superbike. Adjustable size. I accept model suggestions.
- Downloads
- 163
- Likes
- 33
- Rating
- 5
104 models
Wall Art Silhouette model of the Kawasaki Ninja 250R 2008 superbike. Adjustable size. I accept model suggestions.
Fostex T50RP headphones are very tough, but one place many fail is where the adjustable headband mounts to the ear cups using a pivot. The metal headband rods can twist themselves loose from the pivot and the cup will fall off. Left in an…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
Check Out my improved Design - Slim Ammo Box 9mm 50 Rounds V2.0- ---.308 / 7.62 Box now also available! --- https://www.printables.com/model/1338689-308-slim-ammobox-50rds-762x51 I did not found a slim Ammo-Box for 9x19 which i liked…
Slim Ammo-Box for .223 / 5.56 ---.308 / 7.62 Box now also available! --- https://www.printables.com/model/1338689-308-slim-ammobox-50rds-762x51 Update: Slot for label infront of box engraved “.223 Rem” infront of Box Locking mechanism…
Please don’t forget to like the model here on printables if you enjoy it! This is a 1:15 scale model of the 2025 Honda CB650R, meant to be printed in pieces and assembled without using glue (With the exception of second color for the…
as most of rc cars found online are difficult to print i made this car printable
can be printed together or separately in other colours the Mustang is very realistic Print in place kit card , Assembly required need to use a support
75mmx350R Shell This Shell was used in the M4 Sherman Tank. It’s not 100% accurate but I think it’s pretty close. It's not meant to be a historically accurate replica, just close. I thought that if you’re going to have a German 88mm (…
Couldn't find quick release plate compatible with my Velbon Sherpa 250 so I have designed my own. QB-157.stl - first version - cavity for screw head is about 5mm. QB-157 deep.stl - cavity is deeper for bigger hardware. Print instructions…
Slim Ammo-Box for .308 / 7.62 Box Extreme slim design Stackable Reliable Option to insert a Note with Loading-Data from inside No visible Slot for Note from outside (clean Design) Punisher logo on top as 0.1 mm indentation for two-color…
Printed part is 325mm on the longest face, meaning that you need at least a 295x195 print bed to print this. or a 250x250 work too I decided to try my best to reproduce the wr250r chain seal guard that protect the swing arm to get damage…
9mm=1ft scale Diamond DA50RG model. A great teaching aid or just a fun model to have on your desk!
Cache pour le Té de fourche de la honda cb650r, vous pouvez utiliser du double face ou un poitn de colle pour que ce cache reste en place dans la durée. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
An Air filter cover for the Honda CRF250R, to protect it from water during washing and from dust during long term storage or transportation. Its designed with a long lip in case you wanted to add any sort of sealing material like window…
Remix of @Chewbugga sturdy-sided model, scaled 131.7% taller to accommodate 22Mag rounds. I also made a new tray with larger holes to fit the larger casing. Material: PLA Infill: 25% cubic Bed adhesion: Brim Support: No
You can mount your licenseplate, turn signals and taillight. Yamaha DT50 2003 - 2011 turn signal- LED, slim ones fits best, M10 Taillight - LED, C-C 60mm Works with standard print settings, increase peramiters at screw holes for sturdier…
As a mount, I used a cheap dumb adapter from fotodiox and disassembled the Fuji mount. The fit of the 50r against the plate is very tight, but this is consciously to get the 50r as close to the lens as possible. Tested and in use on a…
Remix of @Chewbugga 22lr sturdier box, scaled z to 58.14% to fit 22 short rounds better. I also made a new tray. Material: PLA Infill: 25% Cubic Bed adhesion: Brim Support: No
Please don’t forget to like the model here on printables if you enjoy it! This is a 1:15 scale model of the 2025 Honda CBR650R, meant to be printed in pieces and assembled without using glue (except the windscreen and lamps) The materials…
Just got my Yaesu and realized I needed a stand to tilt the radio up, and provide a place for the microphone to attach. I came up with this simple model. This holds the entire radio and not just the face which is what I wanted. I printed…
This is is a bracket designed to attach a Yaesu FTM-150 control head and microphone to any AMPS (30 x 38mm) pattern mount. It works well with RAM mount or Lido Mount components for mounting the control head in a vehicle or even on a desk.…
Fuel cap designed for the 2009 Kawasaki KLX 450R . This model was created from scratch and is meant to be printed in hydrocarbon-resistant materials . PLA is not recommended , as it may degrade in contact with gasoline. I used nylon…
Comfort straps inspired by @CapraAudio design. The screw-in version can be installed the same way as other MrSpeakers-style straps. I recommend finding longer screws as the stock ones will barely reach the threads on the adjustment arm.…
My take on an ammo box. The insert can slide out and can be locked in place after every row.
This is the current 24s version, i am unsure if the design will physically change for the 32s version
Fork guards specifically for the CBR250r, which are 37mm forks. These are found on many other smaller retro and older Honda models. This should fit any with the standard 37mm forks, but the bulge diameter at the top may vary, and I am…
This is a Sena product The Sena 50R To be used for bracket, transport case or other.
This is my design for the CBR250rr MC19 MC22 mirror blanking plates that i made for my track mc22. I set the infill to 40% to add extra strength when tightening the nut and bolt so it didn't tear through or crush the print.
Replaces the pleather headband found on the mk3 models of the Fostex T20RP, T40RP, and T50RP as it is known to flake to pieces. This is printed in multiple parts to avoid large overhangs in the TPU when printing and to allow for…
Topes para la Honda CB650R
this design uses a M3 nut and a M3x ~10mm socket head cap screw. It might also work with the T40 and T60 headphones
This are two Mounting bars specific designed for the R1150RT / R1100RT / R850RT BMW bike. LH and RH differ from each other due to the different placement of the lefthand and righthand side cylinder head. Therefor I didn't want to mount…
This is a basic desktop stand for the Yaesu FTM-150R dual-band mobile rig. It sits the radio up 2 inches at a 10 degree slope. The central ventilation ports are totally exposed. There's space under the control head to set down the mic.…
It was tested in the field and survived very rough desertic weather conditions. I'm 100% sure it fits models 2012-2014, unsure about other models, but could measure the STL and your bike to compare. Print Settings Printer Brand: Prusa…
Should of course also work on T30/T40. Print the two parts and screw them on the rails of the T50RP. The screw hole has a diameter of 2.5mm. Works well with a ~12cm 90deg to 0deg 3.5mm cable between Fostex and Fiio.
HONDA CB650R LITOPHANE How I Designed This https://lithophanemaker.com/Night%20Light%20Lithophane.html…
bike headlamp holder Fenix HM50R, Fenix HM51R, držák čelovky na kolo Fenix HM50R,Fenix HM51R
Just print, this is the exact same model as the original with a cutouts to fit HP DPS-750RB
I took the passenger pegs off my Honda CB650R. I wanted something to clean up the posts. A quick summery of the models: Bar 1: Flat bottom, rounded top, 0.250" thick, M8 FHCS Bar 2: Flat bottom, bevel top, 0.375" thick, M8 SHCS Bar 3:…
Just a simple cover that protect your wr250r key. Print in PETG for outdoor use. You need to stop the print before it covers the key so that you can put the key in, because after it print you won't be able to put it in. put the key on the…
Clips for 60mm Hub Caps to snap into the hub of a BMW R1250R / RS Hub Caps can be found on Ebay etc. Designed for 60mm caps with 5 clips. Snap off the original clips and glue the model in place. Wire ring clip can be reused, model mounts…
Imprimir con material flexible.
Print instructions: This should print without supports. I was able to print it laying on the large flat side down. Bike Instructions: Remove the seat Remove the four 4mm bolts from the rear trim Remove the rear trim, gently pulling on the…
If you want to remove catadioptre from your bike you can either cut your brackets leave them as they are (ugly) or print this. I have used PETG, 100% solid. Might be a tight fit.
I replaced the clock with a beeline. the clip is from a bar handle, but can also be printed. The wall at the upper part is very thin, so print carefully. lower and ubber part as well as clip can uses m4 thread nuts to connect. i used some…
The piece on the T50RPs that hold the rail to the headband system. On the Mk2 they were all black. On the Mk3 they have the orange “Fostex” and on the newest T60RP they have the gray “Fostex” logo. This was created mainly for replacement…
Un piccolo portachiavi - A small keychain
Don't have a 3D printer? Email me at [email protected] and I'll print for $70+shipping Tested and confirmed working for LG 32GN600-B Works for 32GN500, 32GN500-B, 32GN50T, 32GN50R, 32GN600. Please read the instruction manual before…
This model is for all users of American DJ Mega Bar 50RGB LED panels. Original end caps are often damaged. I designed a replacement part. Like the original, it attaches to a metal profile with four M4 screws. The wall mounting the angle…
This is a mount for the Runleader RL-HM035A Tachometer/Temperature gauge, it should work on other Runleader models in case it has the same mounting points. It attaches to any 8mm bolt it was tested on a CRF250R 2025.
3D model of a bicycle mount designed for the Fenix HM50R V2.0 flashlight. The mount allows stable and secure attachment of the flashlight to a bicycle handlebar and is intended for 3D printing.
Carrying handle for Fenix LR50R search light. In my opinion this light should come with handle equipped as pretty much all the high power search lights do. This does exactly that, allows for better and longer handling of the light with…
I replaced the clock with a beeline. the clip is from a bar handle, but can also be printed. you need the clocks mount to hold the beeline mount in place. The original seal from the beeline can be reused. Since the beeline is completely…
Spesso si usura molto facile così ne ho creato una copia con l'occhiello più grande e più spesso per prevenire l'usura.
Ho stampato le staffe in PETG. Puoi anche usare ABS o simili. Il PLA non è consigliato. Se vuoi offrirmi un caffè, usa il link paypal nell'ultima immagine.
Batch must be printed together for print quality.
Lens cap for the precious Fenix LR50R. Not sure how impact durable the Fenix lens is and saw few of these here for different models so ended up making one for this model. Got it right and tight on the first go with Fusion. I made it with…
A simple ABS cable holder for the BMW R1150RT and similar models. I use them instead of a cable tie.
the model included is only the right side, but you can mirror it in the slicer to get the left side too. I printed mine with flashforge petg-cf using prusament petg filament profile with 100% rectalinear infill. Use this part at your own…
The Yaesu FTM-150R(ASP) is a pretty good radio for working FM repeater satellites. It is able to do crossband duplex, has good harmonic filtering, and has a good receiver. It is a bit clunky to use with a handheld beam antenna (Arrow or…
Tapa del arranque torno Kart E2N-750R Category: 3D Printing
This is a remix and a build upon the excellent forward air cleaner mod for the Bolt posted by Uglylittlebush. I have remixed the original adapter which gets bolted to the air intake, as the crankcase breather port position wasn't in the…
The centre of the gasket remains fixed in place while the outer piece rotates with the reflector. I enjoy this design because sometimes the reflector hole diameter changes with different batches, so even if the outer gasket fits tightly…
3D printed enclosure for HP DPS-750RB power supply with an X-Adapter X11 Prints in 7 pieces Functional power button for the X11 Requires 10 M3x20 to assemble, and optionally a further 2 screws to attach the two base pieces together.…
The aftermarket mirror for my 2019 CBR650R mirror mount does not quite fit in the factory location, so here is a 10mm spacer I created to make it fit. Could be scaled dimensionally in a slicer to fit different needs - raise more or less.…
The GPX does not have a regular handlebar, which makes the installation of a phone holder impossible. This bracket is intended to be placed below the ignition lock, reusing the original screws holding the plastic cover. It is not a phone…
Replace the existing short knob for the petcock on this CBR250RR MC22 with this one and now can then reach it with gloves on whilst riding the bike and select the reserve when we hear it splutter as well as turn off the fuel to let the…
this a tire for the sand for the Trifekta RC 3-Wheeler H250r, and this is a good tire
Replacement Floor Plate for BattleAxe 150rd AR-15/M4 Airsoft Magazine A 3D-printable replacement bottom plate for the BattleAxe 150rd polymer mid-cap magazine used with AR-15 / M4-style airsoft AEG replicas. This part is intended to…
this is the 50mm round x 10mm with 10x10 squares 5x at steps of 1mm this is great for first layer plus check validation of linearity uses 1.03 m of filament and shouldnt take more than 20 minutes at 20/20 or you have a processing issue.…
Keychain I designed for my Honda. It is based on the tank graphics on the 1987 Honda XL250R dual sport. Printed using 0.12mm layer, 2 walls, 15% infill on Creality K2 Plus with CFS Either print the included .3mf, or import the .stl files…
Update 10-4-2025: the double-sided tape held temporarily. I have added M3*20 screws after drilling into the backside of the dashboard rails (meeting soft plastic inside). Bracket for mounting the Yaesu FTM-150R detached control head…
XLV750R TURN SIGNAL STALK/OEM NO LONGER AVAILABLE/ALTERNATIVE
GridLink Genesis ™ is based on a 60mm square, 20mm thick (6020) base tile. It is the most structural, strongest and most insulating of GridLink series. At the 5012 or 6020 level, GridLink is more than capable of serving the same purpose…
Моя первая попытка что-то спроектировать и заодно выровнять посадку на болте. Данный впуск использует переработанную базу от Uglylittlebush Единственное отличие - отсутствие отверстия под сапун, поэтому перепроложите шланг от него в любое…
Y3000 Camera mount for Kawasaki Z750R (M10 Mirror hole) Category: Camera
I needed a home for the mic, something strong that wouldn't stand out. Printed in PETG using the “Strength” profile on a QIDI Plus4. Designed to mount on the right side of the Yaesu FTM-150R + Ford Fusion 2016 Detached Head Mount using…
Handle for a psu of a HP proliant DL 370 G6 server Category: Other
The aliexpress grip this is used to modify is here You will also need some M4x6.5.6 heat inserts
Caps the speedometer port on the XR650R wheel. I haven't funded up for the XROnly's shim but I didn't want dirt and grime getting into the wheel mechanism. I used a 10 ID x 14 OD o-ring for a snug fit. Printed more or less solid (high…
Footpeg replacements for BMW R1150R motorcycle. These things are very expensive to replace and wear out after years. I scanned the original , reworked the model to compensate for the lost material and added a thread pattern for improved…
The bracket allows you to move the navigation cradle forward and up a bit. By positioning the cradle forward so it is just under the main display in your field of view, it makes it a lot easier to read while riding. I've printed this in…
Chybějící díly pro držák navigace pod štítek pro BMW R1250R odjednaného z aliexpress.
A set of covers or cases for those bulky and boxy NP-T125 batteries for the Fuji GFX 50R (and 50S). Offers some protection for the batteries, protects the contacts, helps keep the batteries together in the bag or at home, lightweight.…
Just got my Yaesu and realized I needed a stand to tilt the radio up, and provide a place for the microphone to attach. I came up with this simple model. This holds the entire radio and not just the face which is what I wanted. I printed…
Wall Art Silhouette model of the Kawasaki Ninja 250R 2008 superbike. Adjustable size. I accept model suggestions.
Spesso si usura molto facile così ne ho creato una copia con l'occhiello più grande e più spesso per prevenire l'usura.
This model is for all users of American DJ Mega Bar 50RGB LED panels. Original end caps are often damaged. I designed a replacement part. Like the original, it attaches to a metal profile with four M4 screws. The wall mounting the angle…
3D printed enclosure for HP DPS-750RB power supply with an X-Adapter X11 Prints in 7 pieces Functional power button for the X11 Requires 10 M3x20 to assemble, and optionally a further 2 screws to attach the two base pieces together.…
I needed a home for the mic, something strong that wouldn't stand out. Printed in PETG using the “Strength” profile on a QIDI Plus4. Designed to mount on the right side of the Yaesu FTM-150R + Ford Fusion 2016 Detached Head Mount using…
this a tire for the sand for the Trifekta RC 3-Wheeler H250r, and this is a good tire
Please don’t forget to like the model here on printables if you enjoy it! This is a 1:15 scale model of the 2025 Honda CB650R, meant to be printed in pieces and assembled without using glue (With the exception of second color for the…
Please don’t forget to like the model here on printables if you enjoy it! This is a 1:15 scale model of the 2025 Honda CBR650R, meant to be printed in pieces and assembled without using glue (except the windscreen and lamps) The materials…
Just print, this is the exact same model as the original with a cutouts to fit HP DPS-750RB
Remix of @Chewbugga 22lr sturdier box, scaled z to 58.14% to fit 22 short rounds better. I also made a new tray. Material: PLA Infill: 25% Cubic Bed adhesion: Brim Support: No