Search results: 5in

Sort order

542 models

P
PrintablesMetikumi

Snap-in Pipe Clamp – Zip Tie Lock – 20-120mm – 0.8-5.5in - LR Basics

There is a new revision B of this project , with more pipe diameters and additional wall mount distances. Unless you like to print exactly this version of the clamps, please use the newer versions with an improved geometry. Check out the…

Downloads
1,354
Likes
148
Rating
5
P
PrintablesMetikumi

Snap-in Pipe Clamps (Rev. B) – 20-200mm – 0.8-5.5in

Welcome to the improved revision of my snap-in pipe clamp design, now with more diameters and additional wall distances! This versatile design is optimized for the FFF process with various filaments, ensuring a quick print without…

Downloads
912
Likes
89
Rating
5
P
Printabless0

Starlink Dishy v2 Winegard (1.5inch) bushing adapter

There's a lot of plastic at the bottom to give you the ability to put a bolt/screw through the bushing to hold it in the J Mount rotation wise. The top lip is slightly asymmetric to make it substantially easier to remove from the J mount…

Downloads
436
Likes
34
Rating
5
P
PrintablesBuildComics

Milwaukee M12 FIWF12 0.5inch impact driver Holder

This is a horizontal (box) or vertical (wall) mount for the Milwaukee M12 FIWF12 0.5inch impact driver. It mounts with a just a few screws. I use this for my box with powertoolholders (see my other models/collections).

Downloads
227
Likes
34
Rating
0
P
Printablescfeldhaus

6mm / 0.25inch Garden Irrigation Pipe Kink End Cap

If used outdoors print with UV resistant filament, such as Prusament ASA.

Downloads
181
Likes
44
Rating
5
P
PrintablesDaddie0

Gridfinity 3.5in hard drive (HDD) storage stand

// This is a reupload from makerworld of the remix by @penguinprints Gridfinity storage bin for 3.5 inch hard disk drives (HDDs), in 2x4x5 grid layout. This is a remix of a model by @thestevemarshall at…

Downloads
168
Likes
15
Rating
5
P
Printablesgsatelite

GoPro mount for TBS Source One V5 5inch

GoPro mount for TBS Source One V5 5inch. Updated & tested! Good for PLA

Downloads
73
Likes
5
Rating
0
P
PrintablesJF53

VW Pointer/Gol G3 - Rear Speaker 6.5in Adapter

This is a Speaker mount designed to fit 6.5in Focal Access 165 AC into the factory 4 in mounting for the rear speakers in a VW Pointer/Gol 2001 (G3). Printed in ABS Print Settings Printer Brand: Prusa Printer: i3 MK4 Rafts: No Supports:…

Downloads
67
Likes
9
Rating
0
P
Printablesmirplatform

Anycubic Kobra Neo 5inch LCD KlipperScreen

Manufacturing of a case for a 5-inch LCD display. The material is black PETG plastic. The printer Anycubic Kobra Neo.

Downloads
45
Likes
23
Rating
5
P
PrintablesSan G Dice

D20 Vertical (2in x 3.5in) Business Card Holder Print In Place

This is a simple business card holder. It's 2.72" (82.55mm) high (X) 2.8" (73mm) wide (Y) and 2.7" (69mm) thick (Z) in full with a stand on the bottom and holder with tabbed ends on each side. I made it for some vertical business cards I…

Downloads
34
Likes
2
Rating
5
P
PrintablesSkyhigh

Sandpaper Storage 5inch - Additional Files

Found ClubbedEwoks Sandpaper Storage 5inch French Cleat with dividers and ROS positioner - parametric and love how it turned out but my collection of sandpaper included more grits than was offered. So used my slicer to put new values in…

Downloads
32
Likes
2
Rating
0
P
PrintablesRiver Lavinia

38mm(1.5in) Adapter for Guillotape

38mm(1.5 in) adapter for the Guillotape Tape Dispenser. Print with support. Press between TapeHolderX2.stl. 23min print with Input Shaper!

Downloads
27
Likes
1
Rating
0
P
PrintablesGuido666

Stocking Hanger for 1.425in Countertop

Just a little hook I made to hang Christmas stockings from a 1.425" (36.2mm) thick counter top. They hold quite a bit of weight, and can be scaled to any countertop size. Print them with 90% infill. Category: Decor

Downloads
22
Likes
3
Rating
0
P
PrintablesAsa

Drywall Grommet 2.5inch outer diameter passthrough

I use this grommet in an unfinished basement with partial drywall walls. Use this if you have access on both sides of a drywall wall Includes fusion360 files as well as STEP I printed with default ASA settings on a Prusa XL. PLA should be…

Downloads
20
Likes
4
Rating
0
P
PrintablesFirebolt

Remote Holder 2.3in x 1.5in x 3in

medium remote holder, fits 1-2 remotes, I made this because I needed one and decided to post it just cause.

Downloads
5
Likes
0
Rating
0
P
Printablesmdkendall

2.5inch Three Jaw Chuck

A 2.5inch (63mm) diameter three-jaw chuck. The three self-centering jaws are reversible to allow holding larger work pieces. To fit them in the normal orientation, as shown in the photos, insert them in to the slots in the order A-B-C. To…

Downloads
5,443
Likes
553
Rating
4.89
P
PrintablesAnthonyZ71

3 x 5.25in bay to four 3.5in hard drives cage

Overview OpenSCAD project to create a cage that fits in 3 5.25" drive bays and holds 4 3.5" hard drives using rails. Optionally supports a fan shroud to provide additional airflow to the drives. You need to print: 1 cage-cage.stl 8…

Downloads
1,674
Likes
221
Rating
4.75
P
PrintablesLine Arc Line

5.25in Drive Bay Cover Panel (CD / DVD Drive)

Cover Panel for 5.25 inch optical drive pay on a PC case. It is currently configured to fit a CoolerMaster Mastercase Pro. Not all cases use the same hook-length for their Drive-Bay covers. Measure the hook positions of the drive-bay…

Downloads
1,654
Likes
58
Rating
5
P
PrintablesRagingRoosevelt

3U Hard Drive Bay for 8x 3.5in HDDs for 10" Mini Rack

BOM Part Qty Image M4 Heatset src 1 src 2 12 M3 Heatset src 1 src 2 8 M4x5mm (BHCS preferred) 7 M4x10mm (BHCS or SHCS) 5 M3x10mm (BHCS preferred) 8 Jonsbo N3 Backplane src 1 (verified) src 2 src 3 src 4 I also designed a 7-drive version…

Downloads
1,421
Likes
546
Rating
5
P
Printablesdevincody

Sanding Mouse for Woodworking 5in Disk Sandpaper

I printed with 40% infill ABS for better structural rigidity and heat resistance.

Downloads
1,271
Likes
312
Rating
5
P
Printablesywabiko

Elecrow 5inch HDMI Display-B Case

(Update 11/25/2019) Added the latest version STL files (that matches with IGES ones). (Update 4/12/2019) Uploaded IGES model files for easier remix. A quick snap-on case for this HDMI LCD module with capacitive touch screen. Elecrow 5inch…

Downloads
1,062
Likes
67
Rating
4.86
P
PrintablesKevin

Flexible Vase Mode Segmented 2.5in Hose

Flexible 2.5in (63.5mm ID) segmented/modular hose system designed in such a way that all parts can be printed in vase mode for faster prints and to ensure a good seal between each component. The hose is capable of 90° bends with 6…

Downloads
966
Likes
270
Rating
5
P
PrintablesDavid Hanuš

GEPRC Mark4 HD 5inch GoPro mount

Gopro mount on FPV dron. Tested on Gopro 9 black.

Downloads
923
Likes
36
Rating
2.5
P
PrintablesMr. Sullivan

Boat, ATV, Offroad 6.5in Speaker Pod

I designed this pod for use with inexpensive Pyle Audio Marine Speakers . Will probably need dimensional adjustment for correctly mounting speakers from different manufacturers. Includes two small drain holes, wiring hole, and adjustable…

Downloads
900
Likes
95
Rating
0
P
PrintablesITG Gear

3D Enclouser Case for Lenovo M90q gen1 ft. MSI RTX 3050 LP, 3.5in LCD Screen

Sharing my custom 3D enclosure design for the Lenovo M90q Gen 1, featuring the MSI RTX 3050 LP, a 3.5-inch LCD screen, and an RGB fan. This project involved designing the 3D case model using SketchUp and printing it with PETG filament on…

Downloads
834
Likes
48
Rating
0
P
PrintablesJS_SunnyFlorida

5.5in Aircraft Wheel Chock

Lightweight, low-profile wheel chock with 5.5 in wheels. Should clear any wheel pants. Ribs on the wheel chock should help the chock stay in place. Holes for a rope or bungee cord. Printed with ASA. The model file has a plain front does…

Downloads
671
Likes
36
Rating
0
P
Printablesaussie-printing

0.75in. Pipe Joiner

0.75in. 19mm. Pipe Joiner PETG recommended for outside use. Increasing wall count or infill to 100% for better strength. No supports

Downloads
642
Likes
25
Rating
0
P
Printablesaussie-printing

0.75 to 0.5in reducer pipe joiner

A pipe joiner that joins 0.75in.(19mm.), pipe to 0.5mm.(12.5mm.) pipe. PETG recommended for outside use. Increasing wall count or infill to 100% for better strength. No supports

Downloads
629
Likes
26
Rating
0
P
Printablesaussie-printing

0.5in. Pipe Joiner

0.5in. 12.5mm. Pipe Joiner PETG recommended for outside use. Increasing wall count or infill to 100% for better strength. No supports

Downloads
626
Likes
25
Rating
0
P
Printablessquirrelf3d

Cake Pop roller - 1.5in

Was a request by one of my patron, not familiar with cake pop making, haven't tested it myself but here it is! longest length is 212mm to be printable on an ender3 size bed no print support handle is meant to be glued in (super glue or…

Downloads
607
Likes
45
Rating
0
P
PrintablesNoneYaBidness

5inch Orbital Sanding Disc Storage

As we all know the Orbital Sanding Disc Paper can get messy, this is a way to organize it. There is one of each model, stackable, or non-stackable

Downloads
493
Likes
274
Rating
4.5
P
Printables3Diocrity

38mm 1.5in or 42mm Roll bar GoPro Clamp

This fits around a 38mm or 1.5in roll cage or roll bar tube and holds a standard GoPro mount. It is designed .25mm small to allow for clamping force and has space for M4 hardware to fasten it. The standard GoPro mounting hardware will…

Downloads
491
Likes
48
Rating
5
P
PrintablesUntangleWORKS

V3 inspired v2 Rifling Mandrel - Wire Based Progressive Twist (50-10) 4.5in 8.82mm ID Barrel

this is basically the same mandrel of the Ivan’s V2 ECM set. but there have been 2 pin’s added so it can be used upside down like the with the V3 ECM set from ImmortalRevolt. but be aware that the V2 from Ivan and V3 from ImmortalRevolt…

Downloads
488
Likes
14
Rating
0
P
PrintablesDavid Hanuš

GoPro mount ( TBS Source One HD 5inch )

www.davidh.cz Gopro Hero 9 black tested FilaFlexible40

Downloads
483
Likes
22
Rating
5
P
Printablesjeepers01

ESP32 5inch Touch IPS LCD Screen Case for 8048S050

ESP32 5inch Touch IPS LCD Screen Case I recently purchase this screen from Ali Express. ESP32-S3 HMI 8M PSRAM 16M Flash Arduino LVGL WIFI&Bluetooth 5 " IPS 800*480 Smart Display Screen 5.0 inch RGB LCD TFT Module. It's a gorgeous 800 x…

Downloads
461
Likes
34
Rating
5
P
Printables3DesignsCH

Laptop Stand for 13-15inch - Snapfit or with tools

Simple Laptop Stand for 13 to 15 inch Laptops. Two Versions, one is snapfit the other with heatinserts and screws. Both versions are rigid, therefore the tolerances are quite tight! If you don't calibrate your filaments, don't think about…

Downloads
450
Likes
32
Rating
4.83
P
PrintablesLine Arc Line

Headset Mount on 5.25in Drive-Bay Cover (CD / DVD / Headphones Optical Drive PC Case)

A Headset / Headphones hook that attaches to the front of your PC tower. It is made to fit as a cover to one of your 5.25in optical-drive bays. It is currently configured to fit a CoolerMaster Mastercase Pro. Not all cases use the same…

Downloads
424
Likes
71
Rating
3.67
P
Printablesmarcusone

Sunton ESP32 3.5inch Display Case Stand

Unfortunately this display has the USB-Micro plug at the bottom (or top if you want to rotate), so one stand is very big in order to accomodate. You can use the smaller one if you purchase a usb cable with a 90deg micro connector* The…

Downloads
414
Likes
30
Rating
4.5
P
Printableskapik1

Fan for soldering from old 2.5inch harddisk

Print without supports Controller 5V-12V-DC-Brushless-Motor-Driver-Board-Controller-For-Hard-drive-motor-3-or-4-wire-p-1018624…

Downloads
394
Likes
404
Rating
0
P
Printablesmark_alot

Washer stamping jig 31mm 1.25inch Blockmit Cold Wallet Crypto Seed Phrase Backup

Remixed to fit for 31mm and 1.25inch Washers to Blockmit for Cold Wallet to Backup Crypto Seed Phrases

Downloads
394
Likes
19
Rating
0
P
PrintablesFliesWithWind

TRMNL 7.5inch(OG) DIY Case with Magnets or Wallmount

TRMNL 7.5inch(OG) DIY Case that you can mount with 15x3mm magnets or hang it on the wall. Use 4 M3x6mm screws to put it together. Be careful with the screen and FPC cable during assembly! This is a tight fit design. Make sure the…

Downloads
382
Likes
44
Rating
5
P
PrintablesOld Curmudgeon

Adapter for Intex Sand Pump to 1.5in backwash hose

Why buy when you can CAD. I still had to purchase the hose to carry the water to a better area away from the house. The knob is a press-fit (at least on my printer) for an M5x25 bolt typically found in printer fastener kits. The hole is…

Downloads
381
Likes
55
Rating
5
P
PrintablesTHIRSTYLOTUS

6x8in To 6.5in Speaker Adapter

This should fit most Fords with the stock 6x8 speaker and adapt it to the more common 6.5in speaker. Fasteners: This uses M4 or M3 threaded inserts to hold the speaker in place. There is a 2mm 60 degree chamfer on the opening for the…

Downloads
369
Likes
19
Rating
0
P
PrintablesmozWORLD

Fruit Fly Trap for Wide Mouth Mason Ball Jar or 1.89L (~1.5in) Bottle

update: I've made the license commercially available to you. I like to pay it forward as I have made my share of money off of free models. Anything that can potentially make someone's life or health better, I will release as commercially…

Downloads
367
Likes
45
Rating
5

fpv 5inch frame

5 inch fpv freestyle frame You are free to make your own changes and improvements!!!! i will be very happy to see this frame being improved!! for assembly you will need the gravity loss standoffs,double nuts and: 14x m3x6 4x m3 x20 2x…

Downloads
361
Likes
20
Rating
0
P
PrintablesVultron

SSD 2.5inch Storage Holder

Introducing the 3D Printable 2.5-Inch SSD Storage Holder: a sleek and practical solution to keep your valuable solid-state drives organized and easily accessible. This compact storage holder is designed with simplicity in mind, allowing…

Downloads
347
Likes
17
Rating
5
P
PrintablesDavid B

Old Town Sportsman PDL 2.5in Seat Riser

Seat Risers for the Oldtown PDL's will definitely give you a better angle for pedaling and also relieve the stress on you knees and back. Will fit the Sportsman 106 PDL and the Salty PDL. Material: PETG Infill 30% Perimeters: 6 Nozzle:…

Downloads
342
Likes
15
Rating
0
P
PrintablesZexelon

2.5in (inch) Hard Drive Cage, Define 7 Style

Simple drive cage to hold six (6) 2.5" hard drives. A toolless drive tray is included and may need to be scaled in thickness depending on the thickness of your drives. Requires one M2 x 8mm retention screw to hold the closure bracket. All…

Downloads
337
Likes
53
Rating
0
P
PrintablesVakio3D Build

Improved Outlet Cover Shelf (3in x 4.75in)

Improved outlet cover shelf for 3in x 4.75in outlet covers. Changes: more edge bevels for better corner quality no side cutouts for less overhangs and better perimeter speed shelf legs are wide enough for full line widths instead of…

Downloads
336
Likes
53
Rating
5
P
PrintablesAviv Halevi

0.5in Hex Banana Collar for FRC

This is the second version of my print in place shaft collar for 0.5in hex shafts. I call this version the Banana collar! This new version is a total redesign of the old model, it improves the gripping force substantially and reduces the…

Downloads
316
Likes
22
Rating
5
P
PrintablesDR_TOBOGGAN_MD

6.5in - CAR SPEAKER 1in SPACER

Designed to be compatible with MK6 Volkswagen and other vehicles that necessitate a 6.5-inch car speaker secured by 4 fasteners. Speaker installation is accomplished using M4 screws and nuts.

Downloads
297
Likes
33
Rating
5
P

A1 5in FPV Drone Racing Frame

A1 5in FPV Drone Racing Frame

Downloads
290
Likes
52
Rating
0
P
PrintablesBrian Zak

5in Disk Sander Sandpaper Holder

Two M3 x 25 screws and nuts for the hinge. Four 5mm x 3mm magnets glued in place to keep it closed. It should print well without supports. I have added the Fusion 360 file for those that may want to tinker with the design. I'm not much of…

Downloads
287
Likes
109
Rating
5
P
PrintablesRiaan

2.5inch Harddrive / SSD Storage for Gridfinity.

Gridfinity storage container for 6 2.5inch harddrives or SSD drives. Made with https://gridfinity.perplexinglabs.com/. Printed with PLA, 0.4mm nozzle. No support needed.

Downloads
284
Likes
28
Rating
5
P
Printablessmysnk

3.5inch Hydroponics Net Cup for 4inch PVC Pipe

For 4inch PVC pipe inside diameter, 4.5 inch outside diameter. New design: https://www.thingiverse.com/thing:2474497 Print Settings Printer Brand: FlashForge Printer: Creator Pro Rafts: No Supports: Yes Resolution: 0.2 Category: Outdoor &…

Downloads
275
Likes
58
Rating
0
P
Printablesskreimeyer

Ryobi Battery Charger Pegboard Mount (2.5in/63mm)

This part will slip into US pegboard (1inx1in) and has two pegs on the opposite side to fit into the mounting holes on the bottom of a Ryobi 18V battery charger. This prints as a single unit and requires no additional fasteners or parts.…

Downloads
271
Likes
27
Rating
0
P
PrintablesStefan Hoschka

5inch (5") Waveshare Capacitive Touch Screen LCD (H) Case

First i wanted to do a remix, but it seems esier to just make a new one. This is a case for 5inch Capacitive Touch Screen LCD (H) https://www.waveshare.com/5inch-hdmi-lcd-h.htm mostely used for a Klipperscreen I use this for my Reprack…

Downloads
271
Likes
17
Rating
0
P
PrintablesHybridHobbyist

Dust Collector/Vacuum Hose Couplers Variety for Bosch/DeWalt tools 1.5in - 3in

I will be adding more in the future with some additional edits to existing ones. This is an expanded variety from my previous upload. I made there specifically for some tools that have clearance problems or smaller diameter size dust…

Downloads
263
Likes
124
Rating
5
P

F1 FPV Drone Racing Frame 5in

5inch drone racing frame 20x20 controllers 200mm mtm 16mm motor mounts

Downloads
262
Likes
27
Rating
0
P
PrintablesPIK3CA

Festool 1.5in Shop Vacuum Adapter

Remix of Meister Edel's Fantastic Model to adapt to a 1.5in shop vacuum Hose commonly found on smaller shop vacuums such as the Shop-Vac 1 gallon models. The vacuum connection side is a friction fit and has a slight taper internally. The…

Downloads
253
Likes
21
Rating
0
P
PrintablesEric F

FRC Print in Place Locking 0.5in Hex Shaft

This model was originally made by a FRC team mentor by the name, “Aviv” on ChiefDelphi (ChiefDelphi Post Here) They share a Thingiverse Link however, it has been 404'd and unavailable since. Aviv also shared the model here on Printables…

Downloads
248
Likes
25
Rating
0
P
PrintablesMine

5in to 6in pipe reducer

5in (5in I.D 5.12OD) 6in(6.12in ID 6.24in OD) 4.5in high. Designed to attach the Harbor Freight 2hp Dust Collector 5in inlet directly to the outlet of the Oneida 4/5 Super Dust Deputy cyclone. Print time with PLA and standard Cura…

Downloads
247
Likes
15
Rating
0
P
PrintablesGabriel Coq

3.5inch HDD Rack

3.5inch HDD Rack. You can pull the hdd for easy maintenance

Downloads
245
Likes
23
Rating
0
P

Schultz IBC Tote M64 (2in) to 0.75in GHT adapter

I created this to connect to standard IBC tote (shultz brand) with a garden hose for watering. Preferable to print garden hose tip down so the inside of the adapter is smooth.

Downloads
241
Likes
21
Rating
0

Sanding block - Large 115mm / 4.5in width

What is it? Sanding block with a 115 mm width to match common sand paper roll sizes. It has two knobs to easily release a sand paper for quick replacement. Holding a large block on it's own might not be as comfortable so it has a handle…

Downloads
240
Likes
56
Rating
5
P
PrintablesJibbius

XPT2046 5inch HDMI Display Cover 800x840

Case for an XPT2046 LCD screen, usable in Raspberry Pi (or other) projects Hardware: 4x M3 16mm screws 4x M3 nuts

Downloads
237
Likes
11
Rating
0
P
PrintablesPffzzhh

Waveshare 5inch Touch DSI Raspberry Case + Stand

A case for the waveshare 5inch touchscreen with a raspberry 4 and a super slow fan for cooling. I used this screen: https://www.amazon.de/gp/product/B08H23KB1G/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 There you can connect the…

Downloads
234
Likes
19
Rating
5
P
PrintablesStiebl

Lapop Stand for 15inch Acer Predator

My first redesign ever -> redesign of laptop stand V2 to fit my Acer Predator 15 inch laptop. I removed the hooks because i don't need them and resized it, so it perfectly fits my laptop. Made the side parts a bit thicker so it is more…

Downloads
233
Likes
17
Rating
5
P
PrintablesMaffooClock

Shell for Waveshare ESP32-S3 5in Touch Display

This is a simple shell for your Waveshare ESP32-S3 5in Touch display that exposes all ports (USB, LEDs, buttons, switch, and MicroSD card), including the 16-position screw terminal on the bottom. It even features a “safe zone” to make it…

Downloads
221
Likes
9
Rating
0
P
PrintablesSibert Declercq

2.5inch Three Jaw Chuck with hex shank

Remix of the 2.5inch Three Jaw Chuck with a hex shank, to allow use with a standard drill.

Downloads
220
Likes
26
Rating
0
P
Printablesluma

5in Fence Post Cap Topper

Fast printing fence post topper for 5x5 vinyl fence posts. No supports required, print in the provided orientation. The “user” facing side prints on the bed, so you can use a smooth sheet for a nice smooth finish or textured or whatever.

Downloads
218
Likes
53
Rating
0
P
PrintablesPencho

DIY Blueretro 5in1 [PS1, PS2, PS3, XBOX360] - guide on description

Blueretro case for minified ESP32. Will work with PS1, PS2, PS3 (via adapter), XBOX 360 (via adapter). Recommended material: PETG/ABS/ASA. Will work with PLA but could deform since ESP32 gets kinda hot. What is blueretro? BlueRetro is a…

Downloads
213
Likes
37
Rating
0
P
PrintablesJoe3020

5in Drywall Sanding Block

Experimental work in progress, please provide feedback. Sized for 5in sanding disks common in home improvement stores. 1.25in ID vacuum attachment

Downloads
210
Likes
47
Rating
5
P
Printablesn9dmt

1.5in PVC Floor Flange

A floor flange for 1.5in PVC pipe. Designed to be used with M4 hardware. Support ring included - I used this flange for a mushroom grow tent, so having a backing ring was helpful.

Downloads
209
Likes
24
Rating
0
P
PrintablesMSkillet

Corsair Carbide Series 3.5inch HDD Rack

I found the HDD rack made by Adalras and liked the design consept and applied it with a huge revamp on the design, it would moreso classify as my own design but i was inspired from his design so it only feels fair to call it a remix. This…

Downloads
208
Likes
31
Rating
5
P
PrintablesClubbedEwok

Sandpaper Storage 5inch French Cleat with dividers and ROS positioner - parametric

French Cleat Sandpaper Storage for 5inch random orbit sanders with dividers and positioner for quickly mounting sandpaper onto the sander base. F3D file is included and fully parametric. 3/4inch french cleat attaches to the main body with…

Downloads
208
Likes
55
Rating
5
P
PrintablesLuc Dunn

Raspberry Pi Zero 2 + 3.5in TFT Enclosure (Snap Fit, Hardware Optional!)

I have a great controller for my 3D printer comprised of a Raspberry Pi Zero 2 and a 3.5in TFT screen running Octoprint and Octodash. But I wanted to bring all my electronics outside my enclosure to print hotter materials. So I designed…

Downloads
205
Likes
21
Rating
5
P
Printablesptmays

Nut and bolt storage boxes 4in wide 3.5in tall, multiple lengths and compartments

I designed these to have 1.6mm walls a multiple of .4mm nozzle size, my printer has no trouble printing .8mm walls on a .4mm nozzle so 2 passes on the walls, your mileage may very. If you cant print them at .8mm walls you can do 4 walls…

Downloads
197
Likes
9
Rating
5
P
Printables5hiftyy

6x8 to 6.5in Speaker Adapters

I designed these to adapt my factory 6x8 speaker mounts to aftermarket 6.5" speakers. These were specifically designed for my 2013 Mazdaspeed3, though they will likely be a drop-in replacement for all Mazda3/Speed3 models for the…

Downloads
192
Likes
16
Rating
0
P
PrintablesTheWoodser

HP Elitedesk 800 2.5in Drive Tray

This 2.5in drive tray fits HP Elitedesk 800 G4 (Possibly others). BambuLabs X1C Hatchbox Black PLA 20% infil All other settings default

Downloads
190
Likes
27
Rating
5
P
Printablesskreimeyer

Ryobi Battery Charger Pegboard Mount (4.5in/114mm)

This is an improved model based on lessons learned from my 2-½" battery charger pegboard mount ( here ) This part will slip into US pegboard (1inx1in) and has two pegs on the opposite side to fit into the mounting holes on the bottom of a…

Downloads
188
Likes
18
Rating
5
P
PrintablesJonathan Lui

Hard Drive Enclosure for 3.5in HDD and SATA adapter

This is a hard disk drive enclosure, with space to add this SATA-USB adapter https://www.amazon.com.au/UGREEN-Adapter-Support-Converter-Drives/dp/B01H1I9X60/ref=mp_s_a_1_5 If you have a different adapter, I've provided a STEP file for all…

Downloads
188
Likes
22
Rating
4.5
P
PrintablesLabWizard

3.5in Hard Drive Case

Needed a case to store a 3.5in Hard Drive that wouldn't be actively used (so no need for openings to allow for connections, as other models had). Very simple case with a bottom and lid. Printed in TPU on Ultimaker. Came out a little…

Downloads
185
Likes
26
Rating
5
P
PrintablesPeteD

HP Z440 (and similar) 5.25inch Drive Finned Bay Cover

Snap-in vented cover for 5.25inch drive bays with vent fins to match the design of the HP Z-series workstations. Print with black PETG. // Print with inside surface to the printer bed. // Use tree support. // Turn on ironing. // Consider…

Downloads
181
Likes
18
Rating
5
P
PrintablesAndrew Manger

Vacuum Coupler/Adapter for Bauer 2.8amp 5in Palm Sander

The coupler allows you to remove the dust box and attach a 1-7/8" shop vacuum hose. I use this one and I love it! You may have to sand down the inside of smaller part of the coupler to get an easier fit. Here's a link to the exact sander…

Downloads
178
Likes
23
Rating
5

Elecrow 5Inch TFT PI Case

This is a case for the Elecrow 5Inch TFT Touch Screen (Resistance Touch) display. This display can be found on amazon (link provided father below). The display is sandwiched together with the PI using GPIO pins (uses 26pins). So far it…

Downloads
171
Likes
9
Rating
0
P
PrintablesNeel

Festool Kapex to 2.5in hose adapter

Adapter for the 36mm Kapex hose. It has the tabs built into the adapter which will click in and hold the hose just like a normal Festool hose. Printed with PLA with no supports (with the larger diameter on the build plate)

Downloads
170
Likes
12
Rating
0

6in, 4in and 2.5in Duct Adapters for Dust Collection

These are a bunch of adapters for adapting from 6in and 4in DWV pipe and adapters down to 2.5in for duct collection applications. The "4in Duct FItting to 2 - 2.5in Spuds" fits inside a 4in DWV fitting. The "4in Gate Valve to 2 - 2.5in…

Downloads
161
Likes
39
Rating
0
P
PrintablesAdam

Series 15/30 (40mm / 1.5in) Aluminum Extrusion Handle (8020 / 4040 / 1515) - T Slot

Two piece handle for Series 40/15 (40mm / 1.5in) Aluminum Extrusion Included step file incase you need to make changes. I printed it upright, and on the side. And I think the side comes out better. I used tree supports and a brim when…

Downloads
157
Likes
28
Rating
5
P
PrintablesJN-Husch

Case for round Waveshare 5in Display

A simple wallmount case for the round 5in display from Waveshare. For wall mounting, only three parts need to be printed. There are two optional parts that can be printed to allow the display case to stand on a desk. STL Files can be…

Downloads
155
Likes
26
Rating
0
P
PrintablesJoe3020

2.5in to 2.25in Shop Vacuum hose adapter

Fitting to use 2.5in flex dust hose with standard 2.25in Shop Vac accessories including the Dust Deputy 2.5. I used the Wen hose available from your favorite online retailer. It will be a tight fit on the 2.5in side.

Downloads
152
Likes
12
Rating
0
P
PrintablesMr. Sullivan

Trailblazer Front Door 6.5in Speaker Adapter

2002-2009 Chevrolet Trailblazer (and TBSS) front door speaker adapter for 6.5 inch speaker. Easily clears the inside of door panel and window to the rear with most typical 6.5in components or coaxial speakers. Print face up with minimal…

Downloads
147
Likes
14
Rating
5
P
PrintablesChristian

Hard drive slots for Dell Precision T3610 5.25inch bay

Replaces the CD drive and card reader and holds two 3.25-inch hard drives, but only the 19mm thick ones because, well that's what I needed the file for, and I didn't have enough room to work with 25mm ones anyway. But yeah, this is made…

Downloads
143
Likes
26
Rating
5
P
PrintablesHRM_Studios

Benchy Label Flag (1x1.5in)

A flag to turn your benchy into a filament swatch! These were designed to accept a 1inch adhesive label. I like putting the brand, filament type, and color on the front and printing specs on the back. I designed this to use with my…

Downloads
143
Likes
21
Rating
5
P
PrintablesPR

SSUPD Meshroom S V2 1.25in 32mm Front Extension

I fixed the size inaccuracies with the previous version by shortening the bottom piece by 1.651 mm and making the dove tails 1 mm wider for a better fit. Print with the pegs facing up. No supports.

Downloads
139
Likes
8
Rating
0
P
Printablesmichaelrossct

Dual 2.5in HDD to 3.5in HDD adapter - Rails

Very simple hard drive adapter to put 2 2.5" hard drives in a 3.5" HDD bay where you have to mount to the sides. I used m3 threaded heat inserts for the mounting points but you could also use nuts.

Downloads
139
Likes
15
Rating
0
P
PrintablesNadir @ CN3D

Sovol SV08 Mount for Makerbase MKS IPS50 5Inch

Later Edit: updated to compensate for the pins that are sticking out thanks to our member DevoidTV all the help. if you printed the design already you can snip this pin out or print the new version. also I have increased the cutouts for…

Downloads
139
Likes
33
Rating
4.75
P
PrintablesCourtland

2.5in (2.5 inch) duct splitter

This is a 2.5 inch duct 2-to-1 splitter that is fairly compact and easy to print. No supports needed.

Downloads
138
Likes
11
Rating
5
P
PrintablesHybridHobbyist

2.5in Dust Collector/Vacuum Hose Couplers

GO HERE FOR UPDATED MODELS AND MORE SIZES https://www.printables.com/model/332587-dust-collectorvacuum-hose-couplers-variety-for-bos I designed this a while back for myself but decided to upload the files for others if they need it. If…

Downloads
138
Likes
51
Rating
0
P
PrintablesOsprey

Alternate clip for 2.5inch Three Jaw Chuck

The circlip that came with the original design ( https://www.thingiverse.com/thing:2670620 ) had a habit of getting pushed out of position when tightening he jaws. So I designed this alternate part that can be tightened in place to keep…

Downloads
138
Likes
17
Rating
5