Search results: 605

Sort order

Counting matching models…

P
Printablescombobulator

Lens Cover for Bosch GTC 400 C Thermal Camera (16055002CR)

Lost the lens cover for my Bosch thermal camera so I decided to recreate it based on photos and share it here in case anybody else needs it. It fits perfectly and follows the original design as closely as it can. There is, however, an…

Downloads
10
Likes
1
Rating
0

10" Rack mount for TP-Link ER605 Router (Omada)

This bracket is made for 10" racks. They have the standard dimensions of 1U (44.5mm) in height and 250mm in width. With these dimensions the mount can be printed on a print bed with the dimensions of 220mm x 220mm. The mount is designed…

Downloads
1,030
Likes
80
Rating
4.67
P
Printablesmelvinfec

TP-Link ER605 OC200 19 inch rack mount

With this design you can mount your TP-link ER605 and OC200 the proper way. You wil also need the Ubiquiti Networks ER-RMKIT. I used M3 10mm screws to screw the printed parts together.

Downloads
814
Likes
62
Rating
0
P
PrintablesPale

ER605 1RU Shelf

A friend recently discovered the TP-Link ER605 Firewall/Router/Switch, great device for the money! Well I needed a way to mount this in my 19nich rack. This 1RU shelf will allow for 1 or 2 ER605 devices to be mounted. Each mount has a…

Downloads
583
Likes
45
Rating
4.75
P
PrintablesFloKun

TP-Link ER605 3U Rackmount Adapter for 10-inch Network Cabinets

This rackmount adapter is designed to mount the TP-Link ER605 wireless router in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter…

Downloads
536
Likes
61
Rating
4
P
Printablesthall72

Lego Compatible (60596.dat) Door 1 x 4 x 6 Frame

This model is compatible with the lego system.

Downloads
530
Likes
42
Rating
4
P
Printablesbatonikleonardo

TP-Link Omada ER605 and SG2008P 1U Rack Mount

TP-Link Omada ER605 and SG2008P 1U Rack Mount

Downloads
421
Likes
20
Rating
5
P
PrintablesDiew

10 inch rack TP-Link ER605 - SG108

How to generate label read in 10 inch Keystone Patch Panel with Label description It design not to be a tight fit (to prevent scratching), If you want more secure you can insert pieces of paper between shelve or use m3 screw on pre drill…

Downloads
411
Likes
53
Rating
5
P
PrintablesJustin Savala

Gridfinity Caliper Holder - VINCA DCLA-0605 Calipers

The only lay flat caliper holder models that I could find didn't fit my calipers. I have 2 sets of these calipers that I bought off of Amazon and wanted the set in my workshop to be easier to get to. Example was printed in PLA on a…

Downloads
358
Likes
23
Rating
5
P
Printablesthall72

Lego Compatible (86058.dat) Tauntaun / Wampa Horn Right

This model is compatible with the lego system.

Downloads
354
Likes
45
Rating
0
P
PrintablesCeleste

Celeste's sturdy 10" rackmount panel V.2 for TL-SG108 and TL-ER605

Notice ℹ This mount also fits the "NETGEAR" and “D-Link” equivalents of the equipment mentioned here, since they all use the same chassis from the same OEM's Accton Technology and Delta Networks . Description This is one of my extra…

Downloads
350
Likes
21
Rating
5
P
Printablesn3bulus

Rack mount for Omada router ER605 & TL-SG108PE

Rack mount for TP-link ER605 router and/or TL-SG108PE switch Files are only provided in one direction, don't forget to mirror to make the complete 1U unit Holes are 3,5mm. Use M3 screws and nuts. I had to redrill. I printed mine in very…

Downloads
302
Likes
22
Rating
5
P
PrintablesDiscoDed

MPU 6050 (GY-521) input shaper mount (remix)

I suggest this being used not only for bed slingers, but also for any printhead. Just glue it somewhere…

Downloads
245
Likes
6
Rating
0
P
Printablesroosteralex82

Govee H6056 Light Bar Stand

Pretty simple print. I printed at 10% infill, .3mm layers with 2 perimeters. It's not a perfect fit, but it holds it great, and it doesn't cover any of the light. Hopefully this doesn't violate any IP rules-- I measured the lightbar and…

Downloads
202
Likes
22
Rating
5
P
PrintablesWulffN

Vinca Caliper DCLA-0605 Battery Cover (Updated)

This is a battery cover for the Vinca DCLA-0605 caliper. The Vinca DCLA-0805 (notice the different model number) battery cover fits for this model, but comes off almost as easily as the original piece. I've resized it to fit tighter on…

Downloads
178
Likes
10
Rating
5
P
PrintablesMichael Jones

10" Rack mount for TP-Link ER605 Router (Omada) with 2 keystones

Remix of @DevineJimmi ‘s 10 inch ER605 rack mount , I’ve added a couple of keystones to help with routing WAN etc in my mini rack. Removed the text too to make it easier to print for me (hope that's ok, please check out the original!)…

Downloads
149
Likes
23
Rating
0
P
PrintablesColibri Studios

MPU6050 Input Shaper Mount

I use a MPU6050 to calibrate the Input Shaper of my printers, so i've modeled this to make the process easir. Just print it in the middle of the bed, then screw the MPU.

Downloads
144
Likes
9
Rating
4.5
P
PrintablesBoieEngineering

Mobil Power Supply WZ3605E Makita 18V

Mobil Power Supply WZ3605E Makita 18V BOM: 1x WZ3605E Power Supply 4x M3 Heat Insert 1x Banana Plug Socket 1x 21mm Toggle Switch 2x M3x10mm Screw (Mount Top and Bottom Part) 2x M3x20mm Screw (Mount Top and Bottom Part) 1x Automotive Fuse…

Downloads
130
Likes
23
Rating
0
P
PrintablesNikodem Bartnik

Reaction Wheel (Arduino, MPU6050)

This is a small and easy to build reaction wheel. I do not recommend building this project to beginners as it is quite hard to stabilize and properly calibrate the PID algorithm. More information about the project: Code can be found on…

Downloads
130
Likes
5
Rating
0
P
Printablesjaredandrews

Stanley 66052 6-Piece Precision Screwdriver Set Holder - Honeycomb Storage Wall

This is a holder for the Stanley 66052 6-Piece Precision Screwdriver set. It is meant to attach to insert-empty.stl and go on your Honeycomb Storage Wall. OnShape document

Downloads
122
Likes
18
Rating
4.67
P
Printablesctheroux

605ZZ Bearing Mockup

605ZZ Bearing Mockup

Downloads
121
Likes
3
Rating
0
P
Printablestomasf

TP-Link ER605 half-width rack mount

Half-width (9.5") rack mount for TP-Link ER605 Omada router. Mount the router using two M5 bolts.

Downloads
105
Likes
5
Rating
0
P
PrintablesMurdogk

lego 60800 60603 62113 6154 60621 2377 4863 6556 4035 60596 57894 60599 57895 60623 28327 42509 60806 80683 42205 60616 92589

lego 60800 60603 62113 6154 60621 2377 4863 6556 4035 60596 57894 60599 57895 60623 28327 42509 60806 80683 42205 60616 92589

Downloads
95
Likes
5
Rating
3
P
Printablesmachineica

6054 / 5x7 headlight to 4x6 adapter

I wanted to fit some 4x6 lights i had on hand to my 92 Toyota with 5x7 or 6054 sealed beams. These are adapters with no retention currently because i had planned to epoxy the 4x6 inside them. I will release a version with bolt on…

Downloads
92
Likes
9
Rating
0
P
PrintablesA V

MPU-6050 Mount for Ender 3 V2 with Sprite Extruder

My Ender 3 v2 Neo is on klipper and I wanted to give resonnace compensation a try. I had an MPU-6050 laying around from an ESP32 kit so I modeled a mount for it in Fusion360. It takes around 11min to print. I recommend to print it in the…

Downloads
87
Likes
5
Rating
0
P
PrintablesCreative_builds

lego piece 6055629

sorry for the scale it was designet wrong so you need to print is at 10% scale

Downloads
87
Likes
4
Rating
0
P
PrintablesJERRY

Govee H6056 adjustible Simrig mount

Needs 2x countersunk Screw for Rigmount is designed for M8 2x M6x30 socket head screw & 2x M6 nut for mounting the light. the design allows for about 30degree of tilt in each direction

Downloads
84
Likes
8
Rating
5
P
PrintablesMurdogk

lego 4215 73878 23405 60601 38320 51266 60593 51239 60594 60598 60607 60608 60614

lego 4215 73878 23405 60601 38320 51266 60593 51239 60594 60598 60607 60608 60614

Downloads
84
Likes
1
Rating
0
P
Printablesphko241

TP-LINK ER605 Halter

Einfache Halterung für einen TP-LINK ER605 Router. Senkrechte Montage in einem Serverschrank, passend zu den höhen Einheiten. Gedruckt habe ich es aus PETG Zur Befestigung habe ich Senkkopfschrauben in M4 genommen es passen auch 4mm…

Downloads
82
Likes
10
Rating
0
P
PrintablesEquinoxeFR

Abus Bordo Lite 6055 mount for Brompton

Solid mount for an Abus Borgo 6500 Lite. You can install it on the top tube of the brompton with 2 ziptires. You also need a strap (≤ 30mm) to secure the lock.

Downloads
76
Likes
10
Rating
0
P
PrintablesBRS-ENGINEERING

Oldham V2.2 SFU1605

Adaptation for the SFU1605

Downloads
76
Likes
6
Rating
0
P
PrintablesCeleste

Sturdy 10 inch rack mount for the TL-ER605 consumer VPN router

------------------------------------------------------------------------------------------------- UPGRADED PARTS AVAILABLE! Click the link to get to V.2 of this part:…

Downloads
76
Likes
14
Rating
0
P
PrintablesStebashka

Lego round flat tile 2x2 with hole 15535 or 6055313

Lego round flat tile 2x2 with hole 15535 or 6055313.

Downloads
74
Likes
3
Rating
0
P
PrintablesZoomA-3D

MG 605 Merry Fisher boat

The model is a complete solid shell of the MG 605 Merry Fisher boat. The boat comes with a separate stand 3d printable file. Please follow me and comment with your opinion on the product so I can enhance and develop! For custom designs…

Downloads
74
Likes
2
Rating
0
P
PrintablesGroon

MPU6050 / ADXL mount for Voron0.2

A very simple, but very secure and stable mounting option for an ADXL/MPU6050 module, utilizing the two m3 inserts on the back of the Voron 0.2 x-carriage, which most alternative toolheads (like the amazing dragonburner ) do not utilize.…

Downloads
73
Likes
3
Rating
0
P
Printablesthall72
Downloads
70
Likes
21
Rating
0
P
PrintablesPaul

Improved Adaptec 71605 Fan Mount

See original model for addtional info: https://www.printables.com/de/model/713752-adaptec-71605-fan-mount

Downloads
68
Likes
7
Rating
0
P
PrintablesBryan Harris

TP-Link TL-SG605 Holder

Designed to be able to mount a TP-Link TL-SG605 5 port ethernet switch to a wall with #6 screws. I printed with Inland PLA Twinkling Black and it printed great

Downloads
67
Likes
4
Rating
0
P
PrintablesCarlos

Mini-Power supply DIY using WZ3605E, 3d Printed Case

check the video below. tells you all about it. When 3d printing it. you have the main case and the back cover. you can print the main case in all one go, place flat against its back. and put some internal supports. if you want to modify…

Downloads
66
Likes
7
Rating
0
P
Printablesjuh

fischertechnik MPU6050 movement sensor

This is a case for the MPU6050 GY521 gyroscope/accelerometer module with fischertechnik connectors. The 2x6 I2C pin connector is pin compatible with ftDuino and fischertechnik TX connectors. See the pictures for assembly details. A…

Downloads
65
Likes
2
Rating
0
P
Printablesp1mrx

Ender 3 S1 MPU-6050 adapters

Print X axis mount and 2 washers. Use washers to protect board from screw heads. Requires 4 M3 screws, 10mm length. Replace 2 factory 6mm screws with 10mm. Mount adds +4mm thickness. When ready to calibrate Y axis, print mount in…

Downloads
64
Likes
6
Rating
0
P
PrintablesAnrabbarna

TP-LINK TL-ER605 + TL-POE160S Rack mount

I wanted to rack mount my ER605 router and POE160S POE injector on the same unit. You need two M5 bolts to connect the two halves. It's a bit flimsy, but you won't touch this everyday. Dimensions: Router: 158 × 101 × 25 mm POE injector:…

Downloads
62
Likes
1
Rating
5
P
PrintablesJohn Carroll

Adaptec 71605 Fan Mount

While setting up a new fileserver, I needed a new Host Bus Adapter (HBA) card to connect a bunch of hard drives to. The Adaptec 71605 can be found used for cheap and it is a great alternative to an LSI card. The Adaptec 71605 runs HOT…

Downloads
62
Likes
8
Rating
0
P
Printablesthall72

Lego Compatible (86059.dat) Rein with Bridle

This model is compatible with the lego system.

Downloads
61
Likes
13
Rating
0
P
PrintablesTrobaparati

OpenMower MPU-6050 IMU Mount

OpenMower MPU-6050 IMU Mount for Mowgli Project https://www.amazon.com/gp/product/B01DK83ZYQ/ref=ppx_yo_dt_b_asin_title_

Downloads
56
Likes
1
Rating
0
P
PrintablesRPI

TP-Link Omada er605 wall mount

Printed in PETG Suggestion: Print at a 45 degree angle with the screw holes and pegs facing up. Support: Tree/organic Infill: I used 15% but I suggest 25-45% but I have had no issue so far Device clicks in place, I added stand-offs…

Downloads
55
Likes
4
Rating
0
P
Printablesfilotek

7x2 port horizontal patch panel for Leviton SMC 47605-42W

This is a 7x2 port horizontal patch panel for Leviton SMC 47605-42W. With two patch panels side by side, a full 28 keystone ports can be added along a single row in the media cabinet. There's space on both sides of the SMC after mounting…

Downloads
55
Likes
6
Rating
5
P
PrintablesJ Green

Vinca Caliper Model DCLA-0605 Battery Cover

A replacement for missing DCLA-0605 Caliper battery cover. all of the models I have seen just don't fit properly so my OCDness took over and I designed this one.

Downloads
53
Likes
4
Rating
5
P
PrintablesPixi2012

WZ3605E Box

Eine einfache Box für das WZ3605E Modul und USB und Banana Anschluss Category: Electronics

Downloads
53
Likes
7
Rating
0
P
PrintablesBRS-ENGINEERING

Z-Upgrade II v2.07b (SFU1605)

SFU1605 Version - Extend the Z distance of 50mm (need 50mm longer ballscrews spindles), available for 0-2-3-4mm underplates otherwise through height modualator. Corner completly reinforced and high ability, keep the frame aligned from the…

Downloads
48
Likes
8
Rating
0
P
PrintablesGiovanni1954

ORGANIZZATORE GT605

ORGANIZZATORE GT605 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Combo Anycubic Kobra S1 Laser: Mecpow X3Pro 10W

Downloads
44
Likes
22
Rating
0
P
PrintablesNathanC

19" TP-Link ER605 Rackmount + 12-Port Keystone Panel

Modified Jimmi's 10" ER605 Rackmount design to suit a 19" full-width rack, with the extra space being used for a 12-port keystone panel. This panel is removable so you can remove or replace keystones without needing to un-rack the entire…

Downloads
43
Likes
0
Rating
0
P
Printablesgarthvh

Meshtastic Weather Station Node Case for Accurate 06054 Stevenson screen

Meshtastic Weather Station Node case compatible with the Acurite 06054 Stevensen Screen Node case with plenty of room for sensors Case snaps into screen securely but can be easily removed All connectors come out the bottom of the screen…

Downloads
42
Likes
8
Rating
0
P
PrintablesJan Caletka

Himoto Spino E18XB part 23605 head of turning wheel

Head of turning wheel for Himoto E18. For both sides. Model in onshape https://cad.onshape.com/documents/4f551c8de95ad38629df7f24 /w/74fb9946dcf328a5f1cc58dd/e/ffa62c3329b945896d0c19c3 Print instructions Category: R/C Vehicles Summary…

Downloads
40
Likes
4
Rating
0

Nema 17 Peristaltic Pump with 605 bearings

Slightly thinner stems on the bearing mount, and shorter housing, closer the to motor. So more of the motor shaft is in the bearing mount

Downloads
39
Likes
5
Rating
0
P
Printablesgsd

Steam half machine / GB-BSRE-1605

Size of box +- original steam machine, but is height is half. Original sizes view in internet. Installed SteamOS 3.8 convert this device to steamdeck hardware equivalent. Front panel is canonical from original steam machine with magnet's.…

Downloads
35
Likes
12
Rating
0

Ruleman 605(bearing) con bolillas de 5mm(3/16) 5mm

Ruleman con centro de 5mm , 20mm de espesor y 15mm de alto lleva bolillas de acero de 3/16 o 5mm si pueden ser delrin o acetal pom mejor el de la foto es en petg es para bajas revoluciones a menos que lo hagas en acetal POM o nylon 6 ,…

Downloads
35
Likes
4
Rating
0
P
PrintablesMakePro

Canon XF605 Screen Sun Hood

Description: A simple and practical sun hood for the Canon XF605 camera screen — perfect for outdoor shooting when sunlight makes it hard to see the screen. This 3D printed sun hood snaps directly onto the monitor frame and helps reduce…

Downloads
34
Likes
6
Rating
0
P
PrintablesMarc Liyanage

Leviton 47605 Media Enclosure Lock Hole Cover

The Leviton 47605 "Vented Premium Hinged Structured Media Door" for their structured media enclosure comes with a hole for an optional lock. When not used, the hole is covered with a black plastic insert. I wanted a white insert so I…

Downloads
33
Likes
4
Rating
5

WZ3605E PowerSupply

Use the selected printing position to print the case with the least amount of supports. It is also recommended to add a brim to prevent it from peeling off the bed. Material: PETG or ABS

Downloads
32
Likes
7
Rating
0
P
PrintablesNat

Replacement Cap for Breville BBL605XL Hemisphere Control Blender (SP0016078)

Our dishwasher disintegrated my original, so I made a new one. I printed mine with "food-safe" PLA. Here's the actual part: https://www.breville.com/us/en/parts-accessories/parts/sp0016078.html

Downloads
32
Likes
1
Rating
0
P
Printablesjuh

RCWL-1005 and RCWL-1605 sonar distance sensors for fischertechnik

Compared with the ubiquitous HC-SR04 sensors, these modules come with a combined emitter/receiver and an optional UART or I2C-interface. Unfortunately, their minimal range, 25 cm, is much larger. More info on these sensors and an Arduino…

Downloads
32
Likes
3
Rating
0
P
Printablesfribbledom

MPU6050 Gyrometer Mount for Input Shaper Calibration

Simply print it in the center of your print-bed and screw on your MPU6050 sensor while the mount is still attached to the bed. Happy calibrating!

Downloads
31
Likes
1
Rating
0
P
Printablespeteruhlmann

Handle for refrigerator Elektrolux type RA/RM-2D, RM 4605, Griff für Kühlschrank Elektrolux Typ RA/RM-2D, RM 4605

This is a replacement handle for the Elektrolux refrigerator (motorhome) Printed with PETG Das ist ein Ersatzgriff für den Kühlschrank Elektrolux (Wohnmobil) Gedruckt mit PETG

Downloads
30
Likes
2
Rating
0
P
PrintablesBRS-ENGINEERING

Z-Upgrade 2.8c Definitive Edition 1605 (BRS-Oldham)

LAST AND DEFINITIVE REVISION of my high precision Z system with anti-wobble with SFU1605 I focused to reduce parts quantity, BOM, and make it way more easy to implement; -Easy installation over a Stock 3.1: Same Vcore 3.1 bottom plates…

Downloads
30
Likes
2
Rating
0
P
PrintablesSmith

Adaptec 71605 Fan Mount - No Heat Set Inserts

Required Hardware: 4x M3x8mm screws - for the fan 2x M3x12mm screws - thread into the standoffs

Downloads
26
Likes
1
Rating
0
P
PrintablesMat

OpenMower Mowgli MPU-6050 mount

A mount for MPU-6050 on YardForce SA models. Fixed directly on motherboard, so can be mounted on any model with GForce v6 motherboard. I've found my inspiration from mikec model on discord:…

Downloads
25
Likes
0
Rating
0
P
Printablesdannixon

TP-Link ER605 DAP rack mount

Sturdy bracket designed to fit an ER605 into a DAP 2 HE (or similar) 19" rack cage (i.e. this ), in which it occupies 4 of the 10 segments/units. Expects that M3 machine screws are used to fasten the rear retention clip in place and to…

Downloads
23
Likes
0
Rating
0
P
PrintablesYan1 ALAN

Accelerometer MPU6050 Ender 3 V3 SE bed mount

Items required: 2 M4 nuts. 1 4pin JST connector. Accelerometer MPU6050. 2 M3x4 heat insert. 2 5mm M3 screw.

Downloads
22
Likes
6
Rating
0
P
PrintablesMaSa_0815

Re-Insert assistance tool for SFU1605 nut

I accidentally lost a tiny ball while removing the nut from an SFU1605 ball screw — one got stuck between my tool and the thread and jumped out. While searching for a way to reinsert it (and reading a few horror stories), I came up with…

Downloads
22
Likes
1
Rating
0

Lego compatiple Window frame large 60594

Disclaimer: This design is an independent creation and is not affiliated with, authorized by, or endorsed by the LEGO Group. It is designed to be compatible with standard building blocks. This brickvariation corresponds to the Lego Window…

Downloads
22
Likes
5
Rating
0
P
PrintablesRe_Fan

MPU6050 case for solar tracker

instal this case on the hollow iron bar or the frame of the solar panel using 3M tape

Downloads
22
Likes
0
Rating
0
P
PrintablesHumpaPrinta

Mobile Power Supply WZ3605 for Bosch Battery Packs 18v

To build this you will need: 1x WZ3605 Power Supply Module ( https://s.click.aliexpress.com/e/_oppfBi2 ) Bezel: 79mmx43mm 1x Bosch Battery Adaptor (see picture bosch1.png/bosch2.png) (select bosch:…

Downloads
20
Likes
5
Rating
0
P
PrintablesRed Haniwa

WZ3605E Type-C PD Mini PSU

Modified original WZ3605E case to fit my need by merging it with my other designs such as XT60 mount and Powerpole mount. This design have: XT60, Powerpole, DC barrel jack (5.5x2.1mm) and USB Type-C as input options. Powerpole, DC barrel…

Downloads
20
Likes
5
Rating
0
P
Printablesaeberbach

Macintosh Quadra 605 (LC465) PCB mounts

The Macintosh Quadra 605 is one of the best 68k Macs you can get, a 68040 at 25MHz that is easily clocked up to 33MHz in a slim case. It is a great machine to keep around for the old stuff and compared to the big Quadras they are easy to…

Downloads
19
Likes
1
Rating
0

MPU6050 support block

Working on a dRehmFlight based flight controller, I wanted to mount a MPU6050 IMU onto a protoboard. I put female headers onto the board and plugged in the sensor. Electrically, this is a sound connection. Mechanically, not so much. The…

Downloads
18
Likes
0
Rating
0
P
PrintablesToesoe

Sivopar negative masks for Durst M605/M670/M707/AC707/Modular 70

Parametric OpenSCAD design to generate enlarger masks for Durst Sivoneg/Sinoneg/Sirioneg/Unineg carriers. Print two to sandwich your film, or print one if you have a sheet of glass in your carrier.

Downloads
18
Likes
3
Rating
0
P
PrintablesBombast

Filament Dryer Dehydrator Shields, Aroma AFD-605, 332mm

The walls are maybe a bit tall for a spool, but the whole thing works. Requires 5 long segments, a short one (No using a perfect circle causes some fitting issues), and 18 pegs to hold it all together. Use PETG or warping is going to be a…

Downloads
18
Likes
2
Rating
0
P
PrintablesNiklas

Brompton Rack Mounting Bracket for Abus Bordo Lite 6055

Printed with PETG, 0.2 mm layer height, 6 perimeters, 50 % cubic infill. Print was oriented as shown in picture to yield best strength. Organic supports were placed to support large overhangs. Assembly requires M4 bolts and self-locking…

Downloads
17
Likes
6
Rating
0
P
PrintablesJHEngineering

19'' 1U TP-Link OMADA OC200 + ER605

19'' rack 1U plate suitable for ER605 router and OC200 hardware controller. Separaded to fit almost every printer

Downloads
17
Likes
1
Rating
0
P
PrintablesLeoRc

SG1605 Pro - body support

I've changed wheels to a bigger radius so my small brushless beast needed the body to be lifted a little. result https://bit.ly/LeoRc I used PetG first and it worked well until it crashed. The rear are still good, but I reprinted the…

Downloads
16
Likes
1
Rating
0
P
Printablesdmitrog

Case wz3605e

I have designed a custom enclosure for the WZ3605E module. The enclosure offers two power input options on the back: a DC 5.5x2.5mm jack or a USB Type-C port. The USB Type-C power delivery is managed by the PDC004 trigger module, ensuring…

Downloads
15
Likes
2
Rating
0

WZ3605E DC DC holder/case

Product Description – Case/Holder for WZ3605E Module This custom-designed case provides a secure mounting solution for the WZ3605E DC-DC buck/boost converter module. It is engineered to protect the module while allowing full access to its…

Downloads
15
Likes
1
Rating
0
P
PrintablesReiner Freese

Powerbrick Tripod Mount for Canon XF-605

Printable without support, 14mm rod 72mm apart The Clips have to be superglued to the holder itself, so you need the clips 4 times.

Downloads
15
Likes
2
Rating
0
P
PrintablesFindusdwarf

Wall bracket/stand for bit handle 6056046

Das ist ein Ständer oder eine Wandhalterung für das das Thing : "Handgriff für Bohrfutter oder Bithalter 1/4", 6,35 mm nach DIN 3126" von netwalk: https://www.thingiverse.com/thing:6056046 Wem die anghängten Formate nicht reichen, der…

Downloads
15
Likes
0
Rating
0
P
Printablesindra yit

Storage v wheel 605zz

3 wall, 0.3 resolution, infill 40%

Downloads
14
Likes
1
Rating
0
P
PrintablesNineBall

MPU-6050 holder for the SV06+

A quick and dirty holder for the cheap MPU-6050 I bought. Just fits on the hotend screws similar to other mounts

Downloads
14
Likes
2
Rating
0
P
PrintablesPetro Drobov

HSP 86055 Steering Joint Cut

HSP 86055 Steering Joint Lever I made it for 1/16 Himoto EXM-16 At also should be compatible to: HSP KidKing RC 94182 94183 94185 94186 94187 Himoto - EXB-16,EXT-16,EMT-16 Print details: I used PLA 0.16mm (0.2 is also fine) with 99.9%…

Downloads
12
Likes
1
Rating
0
P
PrintablesDbrownlee

Linksys LNE100TX or HP5064-6057 half-height bracket

Better than no slot bracket, this one does a reasonable job of filling the empty space, in my old 486 machine.

Downloads
11
Likes
0
Rating
0
P
Printablesdecoo

Dummy model of JVC RM-C3605

Use this model if you want to design your own holder. It is not 3D scan, so it is not 1:1 for sure. Use offset +0,35 minimum.

Downloads
11
Likes
0
Rating
0
P
Printablesguowa

Replacement knob for XY3605 power supply

Replacement knob for XY3605 power supply. More stable and more comfortable to use than the original one. Print with PETG / PCTG for good fit and durability. Use 0.16 or smaller layer height. Presented model printed with Fiberlogy PCTG on…

Downloads
11
Likes
1
Rating
0
P
PrintablesAnarchywon

CX605 Mill Drawbar Cap with RPM sensor.

Drawbar cap for BusyBee CX605 Mini Mill with a hole for a magnetic rpm sensor.

Downloads
11
Likes
0
Rating
0
P
PrintablesSlawek

0000906050 Fuel Pump/Filter Wrench

Simple wrench for popular diesel filter/manual pump number: 0000906050 https://www.google.pl/search?q=0000906050+fuel+pump&client=firefox-b-ab&dcr=0&source=lnms&tbm=isch&sa=X&ved=0ahUKEwjXwMyy4ovWAhXKHJoKHRgxAU8Q_AUICygC&biw=1703&bih=810…

Downloads
9
Likes
1
Rating
0
P
PrintablesHonza

Kryt a držák na nabíječku ISDT H605 AIR

Držák je určen k uchycení na stojánek pro modely typu F3K a podobné. Lze vytisknout buď jako celek s ližinami, nebo ližiny zvlášť a následně je přilepit. Na stojánku drží nabíječka pomocí ližin a neodymového magnetu o průměru 20 mm a…

Downloads
9
Likes
0
Rating
0
P
Printables3D Carl

1U GS605v5 3x Rack Mount

1U Rack Mount For 3 GS605v5's

Downloads
9
Likes
1
Rating
0
P
PrintablesJohn_Doe

Gridfinity caliper holder for Vinca DCLA-0605

printed at 10% with microcenter's inland PLA-basic. no supports , has slots for magnets.

Downloads
9
Likes
3
Rating
0
P
PrintablesRaptor_50_Titan

Diatone ROMA F5 DJI V2 MotorArm JH60520

Roma F7/F6/F5 V2 Accessories Building Parts This is a work in progress, Will update to a more accurate version when replacement arm arrives. This is for anyone with access to a cnc. Tried this with PLA Meta but arm resident frequency made…

Downloads
7
Likes
0
Rating
0
P
Printablesgedeyenite

Meross M605 Mount

Wall mount for the Meross M605 wireless mmWave presence sensor. Allows you to remove the devices from its location. Similar to my M600 mount. Another user asked me to make this one for the M605.

Downloads
7
Likes
1
Rating
0
P
PrintablesKZN Racer

Yongnuo RF605C Holder

A holder for 4 Yongnuo RF605 holders to keep them organised while stored. Thanks to Jprints for the hot shoe connector covers available at Godox X1T/XPRO cover for hot shoe mount contacts by Jprints

Downloads
6
Likes
0
Rating
0