Search results: 6x2mm

Sort order

Counting matching models…

P
PrintablesBlue

Prusa Core One Webcam Mount for Logitech C920/C930 (for 6x2mm magnets)

Requires six 6x2mm magnets Refer to https://www.ifixit.com/Guide/Logitech+C920+Webcam+Disassembly/115077 to disassemble webcam to replace with mount In order to guide the USB cable from the top down you will need to disassemble the frame…

Downloads
299
Likes
72
Rating
5
P
PrintablesMyNameIsHate

CYD NM RF Hat Enclosure / Case (Magnetic, 6x2mm Magnets)

This is a enclosure designed for the CYD NM RF Hat (commonly used with the Cheap Yellow Display). The case protects the electronics while keeping full access to the screen, antennas, and connectors. The lid is secured using 6×2 mm magnets…

Downloads
755
Likes
49
Rating
5
P
PrintablesBen

M6/M10 PTFE Tubes connector (magnetically) PC4-M6 / PC4-M10 / 6x2mm & 6x3mm magnets

I added support for 6x3mm & 6x2mm Magnets. If you change the parameter in the original fusion file, the shape changes. I used the Push/Drag tool to change the hole for the magnets, to keep the shape of the model. Please leave a like ❤, if…

Downloads
609
Likes
110
Rating
5
P
PrintablesScott

Articulated Slug 6x2mm magnet

Loved the idea of a magnet slug but the smallest magnets I had were 6x2mm. This remix fits a 6x2mm round magnet perfectly, just need a drop of glue to make sure it stays in place

Downloads
523
Likes
96
Rating
4.83
P
PrintablesThaliaFP

DnD Enemy tokens with 6x2mm magnets

I put in magnets to work with them on vertical surfaces. Print as desired, looks best with a filament change.

Downloads
513
Likes
81
Rating
5
P
PrintablesTeque5

Lucky Clover Magnetic Fidget Slider (6x2mm)

Updated version here! Magnetic fidget slider with satisfying haptic feedback and click. The convex shape and debossed clover leaves ensure a comfortable grip for easy manipulation without causing hand fatigue. Small size makes this lucky…

Downloads
337
Likes
36
Rating
4.5
P
Printableslvpvsinfabvla

Core One (L, +) Snap Rivet Remover - 6x2mm magnets (gridfinity size)

This is a remix of the Core One Snap Rivet Remover with magnets by Magmabow. Following original tolerances, I enlarged the internal diameters from 4x2mm to 6x2mm to accommodate the size of magnets used in the Gridfinity system

Downloads
322
Likes
40
Rating
4.87
P
PrintablesTeque5

Lucky Clover Magnetic Fidget Slider w/Captured Magnets (6x2mm)

After printing about a dozen of my earlier revision I decided to improve this by capturing the magnets inside the print. Now there is a pause at 2.6mm to insert the five magnets. This way there is no gluing or pressing magnets into place…

Downloads
246
Likes
42
Rating
5
P
PrintablesHachiro

Remixed for 6x2mm magnets - Prusa Core One magnetic nozzle storage

Hello! Found Stefan's model for Core One nozzle storage, and wanted to print it myself. The only problem, I've got cylindrical magnets! So I modified it for my magnets, and Stefan replied to my make saying I should share it. So here it…

Downloads
220
Likes
75
Rating
4.89
P
PrintablesRei

Bambu Poop Chute 6x2mm Magnet Remix

@KevinV_460266's Poop Chute but with a better fit for 6x2mm magnets and less of a wall around the side.

Downloads
173
Likes
13
Rating
5
P
PrintablesTim

CORE One Purge/Trash Bin - Remix for 6x2mm Magnets

This is a remix of the Core One Purge/Trash Bin originally created by @nicohirsch . Based on the file “ Purge Bin Flat 3mm Bottom.stl” , this version includes holes for 6mm x 2mm round magnets, allowing for secure attachment to the…

Downloads
166
Likes
30
Rating
5
P
PrintablesJustin

FidgetSlider 6x2mm magnets

Printsettings: Printable without supports. Since the holes are designed to provide a simple pressfit for 6x2mm magnets filament flow needs to be calibrated. Otherwise you maybe need to print the model scaled up or down by around .1 to 1…

Downloads
162
Likes
30
Rating
5
P
Printablesmeagerfindings

Core One Purge Bin - (Nozzle Wiper Clearance Remix) - 6x2MM Embedded Magnets

Core One Purge Bin with Nozzle Wiper Clearance Remix - 6x2MM Embedded Magnets. No glue needed due to layer pause.

Downloads
124
Likes
29
Rating
5
P
PrintablesChris P

Brush Case with 20x6x2mm magnets

This is a brush case making use of the 20x6x2mm magnets that are supplied with the Prusa MK3 printers… It's a case that holds 9 paint brushes, so you can take them with you when you are going out painting…It closes and locks with magnets…

Downloads
123
Likes
45
Rating
0
P
PrintablesRevolyze

Magnetic Sliding Fidget with updated magnet positions 6x2mm

Updated the magnet positions to reflect where the button actually is so that the attraction is much stronger and it is much less likely to fall out now. Using the common 6x2mm size magnets with a little bit of extra tolerance similar to…

Downloads
118
Likes
13
Rating
5
P
PrintablesTarrant1701

Tolerance test for 6x2mm magnets

Lately I have been using a lot of 6x2mm magnets for Gridfinity storage solutions as well as designing some electronic control housings with removeable lids. I wanted a quick tolerance test to see whether my CAD designs should have 0mm…

Downloads
116
Likes
10
Rating
0
P
PrintablesBlue

Prusa Core One Purge Bin (for 20x6x2mm magnets)

Requires three 20x6x2mm magnets Print in PETG

Downloads
111
Likes
22
Rating
5
P
Printablesfluetke

Whiteboard pen holder with magnets (6x2mm)

Just a remix of the awesome whiteboard marker holder by awei. I've added 9 holes for 6x2mm neodymium magnets instead of the original magnet tape.

Downloads
111
Likes
19
Rating
5
P
PrintablesZitheran

Gridfinity 2x4x6 for Army Painter paints Stackable, 6x2mm Magnets

I added beveled holes on the bottom of each paint spot to allow for stacking.

Downloads
106
Likes
9
Rating
0
P
PrintablesJeffFaer

Puzzle of Evil 6x2mm magnets

Instead of 3x2mm magnets, this case uses 6x2mm magents

Downloads
104
Likes
19
Rating
4
P
PrintablesReptile123

Core One Purge Bin Space For Wiper 20X6X2mm Magnets

This is a remix of the awesome model by @ed

Downloads
100
Likes
25
Rating
5
P
Printablesmarcorei

Bambu AMS Disconnect Tool (remix) for 6x2mm magnets

See https://www.printables.com/model/382058-bambu-ams-disconnect-tool This is a combination tool to help disconnect the PTFE tube and the AMS cable. This remix has 6x2mm magnet holes instead of the original 6x3mm magnet holes and no text.

Downloads
85
Likes
10
Rating
5
P
PrintablesSpaceRaccoon

magnetic fidget slider toy - REMIX 6x2mm magnet

REMIX of NexPrints model for 6x2mm magnets

Downloads
83
Likes
2
Rating
5
P
PrintablesAMp3dStar

Core One + Gen 2 Pruge Bin with 6x2mm magnets

Print Settings Infill: 15% Supports: None Material: PETG Brim: Recommended I also recommend getting 2xShort M3 socket head cap screws so it aligns and holds the purge bin in place

Downloads
81
Likes
14
Rating
0
P
PrintablesForty206

6x2mm Hole Size Calibration Test

I made this little model to check the hole size needed to properly fit a 6x2mm magnet so I can properly model holes in future designs. The magnets I have on hand are from Amazon . The holes start with true to size in the direct center,…

Downloads
78
Likes
3
Rating
5
P
PrintablesJeffFaer

Airplane device holder with printable inserts and 6x2mm magnets

I followed https://www.youtube.com/watch?v=0Sla-vIsvh4 to add a colored inlay to the model: Arrange both models in your slicer so that the inlay fills the void in the top Slice and print just the inlay. You might want to tweak your slicer…

Downloads
71
Likes
7
Rating
0
P
Printablespickle

pill fidget (6x2mm magnets)

you have to print two parts. I made different designs where you can choose from. The magnets have to be glued in. I hope you like my designes

Downloads
65
Likes
7
Rating
0
P
PrintablesKinchey

Minimal Chess Set | Board remix for 6x2mm Magnets

Minimal Chess Set - Board remix A remix of the board segmet of the excellent Minimal Chess Set here: https://www.printables.com/model/878156-minimal-chess-set All the pieces and other parts you'll need to grab from the original maker,…

Downloads
64
Likes
13
Rating
5
P
PrintablesMathias

Magnet fidget for 6x2mm magnets

A simple magnetic fidget using 6 cylindrical magnets of 6x2mm. Put them 5 in the same orientation in the base and 1 in the opposite orientation in the slider (so that it’s attracted by the 5 others). Add some candle wax before closing the…

Downloads
62
Likes
3
Rating
0
P
PrintablesRIP_Plo-Koon

Zel's Refrigerator Note Toggle, Remix for 6x2mm Magnets

Love the OG design but the 6x2 magnets I have laying around didn't have enough strength slid into the slot side by side so I designed this to be able to stack 2-3 magnets for increased strength. It didn’t really make a strength difference…

Downloads
59
Likes
6
Rating
4
P
PrintablesMousearnickle

Wargaming Bases - Using Gridfinity 6x2mm Magnets

If, like me, you have an FDM 3D printer, then you may well have heard of Gridfinity. Therefore, like me, you may well have an awful lot of 6x2mm magnets lying around that are slightly too shallow to make full contact with GW bases. These…

Downloads
57
Likes
8
Rating
0
P
Printables3D Print Fun

HSW Insert with 3 hidden magnets 6x2mm

Printed in PETG with a pause at layer 14 - 0.2mm layer height, 0.4mm nozzle. Printed a Bambu P1P

Downloads
56
Likes
8
Rating
0
P
PrintablesThaliaFP
Downloads
52
Likes
12
Rating
0
P
Printablesdavidbang

Power Rack Magnetic Label for 6x2mm magnet

Remix with 6x2mm magnet (Pressure Fitted). Text is extruded for better coloring

Downloads
51
Likes
12
Rating
5
P
Printablesparksddd

Remix of PTFE mag connectors for 6x2mm magnets

Remixed the model for 6x2mm magnets and added text for material type for easy color and material identification.

Downloads
48
Likes
5
Rating
5
P
PrintablesOndrashek

MMU3/INDX Color Organizer using 20x6x2mm magnets

This 3D printable model helps you stay organized when using the Prusa MMU3 Community version or INDX. It consists of a compact base attached to metal base with magnets and a set of small color blocks that you can print in the same colors…

Downloads
45
Likes
23
Rating
5
P
PrintablesMNKmakes

Prusa Core One - Magnetic Top Cover - Threaded inserts, no vent handles and 20x6x2mm magnets

A sleek remix of the threaded version without the handles and tabs. This makes the top cover nice and minimalistic.

Downloads
43
Likes
11
Rating
5
P
PrintablesMichforge_3d

Magnet fidget slider (magnet 6x2mm)

A compact resin-printed sliding switch designed to work with 6 × 2 mm magnets . The slider features a smooth, rounded shape and an integrated sliding cap for easy operation. Two cylindrical magnets are embedded inside the body, providing…

Downloads
37
Likes
3
Rating
0
P
PrintablesJibran Yar

Elegoo Centauri Carbon 1080p Webcam Upgrade- Internal Camera Mount 6x2mm Magnets

Remixed from the 1080p usb webcam upgrade made by @RobertSamples_345778 . Changed the magnet holes at the rear to 6x2mm. **Original camera was no longer available, i purchased this webcam on Amazon and it fit perfectly**…

Downloads
36
Likes
10
Rating
0
P
PrintablesMartin Doležel

Prusa Core One Purge Bin (for two 20x6x2mm magnets)

Prusa Core One Purge Bin (for two 20x6x2mm magnets)

Downloads
35
Likes
4
Rating
5
P
PrintablesADIcrafts

Buck Converter Box (LM2596) with 6x2mm magnets

A remix from Buck Converter Box (LM2596) by LDG92, open ends without rail mount. Customized specifically for CR10S Pro. The original mount box design is already snap fit/screw free, I just added two mount holes for 6x2mm magnet , so that…

Downloads
33
Likes
6
Rating
0
P
Printableskenny_dc

LTT Screwdriver Holder - 6x2mm Magnetic

remixed this model to accept magnets that I had on hand so I wouldn't have to buy additional magnets just for this.

Downloads
30
Likes
5
Rating
0
P
Printablesusercode0

Magnetic Google TV remote holder 6x2mm magnet remix

EvilSpyBoys model remixed to support 6x2mm magnets instead of 10x3mm.

Downloads
30
Likes
4
Rating
0
P
PrintablesOndrashek

Prusa Core One Purge Bin (for 20x6x2mm magnets - hidden)

This is a modified version of a 3D model that uses the same magnets as the original. I redesigned it to hide the magnets for a cleaner look. No glue required. Note: Make sure to pause the print at layer 2.60 to insert the magnets. The…

Downloads
28
Likes
4
Rating
4
P
PrintablesDiogo Resende

Oral B Cap with Magnets 6x2mm

This is an Oral B cap that uses 2 6x2mm magnets to keep the cap closed.

Downloads
28
Likes
1
Rating
0
P
PrintablesBrittle73

Gridfinity Stackable Crate - 6x2mm Magnet R-R-R-Remix

All credit to @duawt the OG designer, seriously, I barely did anything. The negative cylinders that I added are 6.5x6.5x3mm for a little tolerance, so you're probably gonna need some glue. *I will try and remember to add a photo of the…

Downloads
27
Likes
5
Rating
0

Omnifixo Extentions - 6x2mm Magnets

The magnetic holding strength is significantly weaker than using the stock bases as standoffs. I recommend using a stock base for the top and bottom of your stacks.

Downloads
25
Likes
5
Rating
0
P
Printablestictoc

quick release underdesk mount 6x2mm magnets

Remix of Honeycomb Alpha/Bravo Underdesk Quick Mount with magnets instead of friction fit

Downloads
24
Likes
0
Rating
0
P
Printablesthurask

Rivet Extraction Tool - 6x2mm magnets

Rivet extraction tool with spot for 2x 6x2mm press fit magnets

Downloads
20
Likes
4
Rating
0
P
Printablesredmar

alupex 16x2mm pipe plug

A plug designed to fit inside a 16x2mm multilayer/alupex pipe (e.g. henco, waving tigris) and used for guiding/pulling the pipe through hard to reach spaces. Keeps out dirt and allows for a bolt or screw (4mm hole diameter) to be inserted…

Downloads
16
Likes
0
Rating
0
P
PrintablesOrbCorp

Gridfinity Maker Knife Tray Remix to fit 6x2mm Magnets

I loved the original design by Phantom Smithy, tho for me it was missing magnet holes. I asked for a STEP file, which he kindly uploaded, and added the holes. The holes are designed with a diameter of 6.12mm. For me that was just right…

Downloads
16
Likes
4
Rating
0
P
PrintablesAlex Don

ZSA Voyager Travel Tenting Kit (6x2mm ver)

I liked what Shulhi Sapli made but didn't have the magnets required for this. I already had 6x2mm magnets laying around so I ordered the holders required from aliexpress, and updated the 3d file to use 6x2mm magnets. Honesly works pretty…

Downloads
15
Likes
3
Rating
0
P
Printableshater

Magnetic Tags 40mm x 20mm for 6x2mm Magnets

Format: Length: 40mm Width: 20mm Height: 5.5mm Recommended text height: 2mm Required magnet size: 6mm by 2mm Placing the text: The text can be placed with any slicer but you find examples in the .3mf file. If you want the text to be on…

Downloads
14
Likes
0
Rating
0

SBFI - 6x2mm magnet

Remix of SBFI to use 6x2mm magnets instead of 6x3mm. With added 0.4mm chamfer on magnet holes to ease magnet insertion.

Downloads
14
Likes
1
Rating
0
P
PrintablesPk11

Magnetic Cable Bracket - 6x2mm Magnets

A simple magnetic cable bracket. Uses two 6mm diameter 2mm height magnets, found cheaply on AliExpress or Amazon. The size in the name is the exterior width. Dimensions are 8xWIDTHx8mm.

Downloads
14
Likes
6
Rating
0
P
PrintablesZYGl

8-Bit Game Over Fridge Magnet (2x 6x2mm Magnets - Remix)

A remix of the “8-Bit Game Over Fridge Magnet” (medium version) with an updated magnet configuration. This version replaces the original 12x3 mm magnet with two 6x2 mm neodymium magnets (0.24x0.08 in), making it easier to find compatible…

Downloads
14
Likes
2
Rating
0
P
Printablescrispysock

"NO ADVERTISING" sign with 6x2mm magnets

A simple No ads sign with inprinted 6x2mm magnets with the font Sweden Sans. I have added the font-pack if you want to change the text.

Downloads
8
Likes
1
Rating
0
P
PrintablesRomulus_Anna

DeLonghi Dedica Portafilter Holder with 4 Magnets (6x2mm)

Remix with 4 magnets in with the 6x2mm dimensions. Printed with PLA 25% infill. Reduced overhang speed to get best results.

Downloads
8
Likes
0
Rating
0
P
PrintablesAhmad

6x2mm Magnet REMIX -Triangle Extruder Visualizer

INFO Extruded circle in the center and made space to fit 6x2mm magnets. Also, little touch up. Rounded the sharp edges and added chamfer. PRINT SETTINGS 0.2mm layer height Add pause print to fit the magnet then resume printing. Tolerance…

Downloads
8
Likes
1
Rating
0
P
Printablesuberrice

IEM Tip case - M3 bolts, 6x2mm magnets

Same as the original, just with M3 holes and 6x2mm magnet holes. I merely enlarged all the holes by 1mm diameter (keeping the 'step down' so the screws ‘bite’), and changed the 10x3mm hole to a 6x2mm one; otherwise the case is exactly the…

Downloads
8
Likes
2
Rating
0
P
Printablescrispysock

V2 - Swedish "EJ REKLAM" no advertising - 6x2mm magnets

a swedish “EJ REKLAM” (no advertising) with built in magnets. I have added font-pack with Sweden Sans.

Downloads
6
Likes
0
Rating
0

Truck magnet 6x2mm

Draft loading schedule for the company's warehouses Each city has its own color combination, and each store has its own number. Each car is printed with two colors of plastic, with a pause after layer 16 (0.2 mm layer height) between…

Downloads
6
Likes
3
Rating
0
P
PrintablesCosmic Spool

Magnetic Insert for Hex Scraper - Slide In 6x2mm magnet

Modified version of the magnetic insert for the Hex Scrapper with a slot for the magnet (6x2mm). It has a slide-in slot for the magnet and a flange to keep it level with Hex Scrapper. The slot is pass-through allowing to push in and out…

Downloads
6
Likes
3
Rating
0
P
PrintablesThomllama

Spool spindles for use with 3x6x2mm bearings

Large is aprox. 45mm in center dia Basic is aprox. 21mm in center dia Both have 2.5mm lips on the end to hold spool in place so the hole in your spools need to be at least 5mm larger than the center Dia. Two spool spindles for filament ..…

Downloads
6
Likes
0
Rating
0
P
Printablesusercode0

Multi-Compartment Trays 3.0 Stackable with 6x2mm Magnets

README Print Instructions Space the both parts far enough away if printed together to make sure the magnets don't accidentally jump out of the holes. (Shouldn't be the case if you have a magnetic build plate) Absolutely make sure to stop…

Downloads
5
Likes
3
Rating
0
P
PrintablesJanus

Prusa Core One Top Bar Badge - "Corey♡" (6x2mm Magnets)

This is a custom "Corey♡" name tag designed specifically to mount to the top bar of the Prusa Core One (+/L). It features two built-in recesses on the back designed to fit standard 6mm x 2mm neodymium magnets for a easily removable…

Downloads
4
Likes
0
Rating
0
P
PrintablesGoogliola

Tall can crusher with 6x2mm magnets

Same as the original, but instead of 10mm magnets (which I did not have) I use smaller 6x2mm ones.

Downloads
3
Likes
1
Rating
0
P
PrintablesFriskyDingo

5x2mm to 6x2mm Magnet Shims

I only had 5x2mm magnets and some prints my friend wanted were 6x2mm. Instead of buying the magnets, I just made this adapter. If you need it changed or anything, I can upload another model if need be with more material taken out. I have…

Downloads
2
Likes
0
Rating
0
P
PrintablesAngy99

Benriner Cover with 6x2mm magnet holes

Same model, only thing changed was the magnet diameter. It still retains the ability to fit a 5x3mm magnet however they will have gap around them

Downloads
1
Likes
2
Rating
0
P
Printables

Core One (L, +) Snap Rivet Remover - 6x2mm magnets (gridfinity size)

This is a remix of the Core One Snap Rivet Remover with magnets by Magmabow. Following original tolerances, I enlarged the internal diameters from 4x2mm to 6x2mm to accommodate the size of magnets used in the Gridfinity system

P
Printables

Multi-Compartment Trays 3.0 Stackable with 6x2mm Magnets

README Print Instructions Space the both parts far enough away if printed together to make sure the magnets don't accidentally jump out of the holes. (Shouldn't be the case if you have a magnetic build plate) Absolutely make sure to stop…

P
Printables

CYD NM RF Hat Enclosure / Case (Magnetic, 6x2mm Magnets)

This is a enclosure designed for the CYD NM RF Hat (commonly used with the Cheap Yellow Display). The case protects the electronics while keeping full access to the screen, antennas, and connectors. The lid is secured using 6×2 mm magnets…

P
Printables

8-Bit Game Over Fridge Magnet (2x 6x2mm Magnets - Remix)

A remix of the “8-Bit Game Over Fridge Magnet” (medium version) with an updated magnet configuration. This version replaces the original 12x3 mm magnet with two 6x2 mm neodymium magnets (0.24x0.08 in), making it easier to find compatible…

P
Printables

M6/M10 PTFE Tubes connector (magnetically) PC4-M6 / PC4-M10 / 6x2mm & 6x3mm magnets

I added support for 6x3mm & 6x2mm Magnets. If you change the parameter in the original fusion file, the shape changes. I used the Push/Drag tool to change the hole for the magnets, to keep the shape of the model. Please leave a like ❤, if…

P
Printables

pill fidget (6x2mm magnets)

you have to print two parts. I made different designs where you can choose from. The magnets have to be glued in. I hope you like my designes