Search results: 780

Sort order

Counting matching models…

P
PrintablesSam Thomas

Window screen frame for Suncast BMS8780T garden shed

Easily add window screens to your louvered air vents to keep bugs out of your garden shed. Use PETG filament for outdoor use. No supports or brims. Print 2 frames. Apply outdoor rated 1" wide double stick tape to back side of frame. After…

Print approx. €4.63–€5.66 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
22
Likes
6
Rating
0
P
PrintablesAlvomane

Skid Plate compatible to Bauknecht/Whirlpool/Indesit Dishwasher, Refrigerator, Freezer (#481252878032 / #3093951) | Gleitteller für Bauknecht/Whirlpool/Indesit u.a. Hersteller

The skid plate on my Bauknecht GSXK 5020 SD dishwasher broke, so I designed a compatible replacement. Apparently these skid plates fit also refrigerators, freezers and other appliances from many companies. Print in STL orientation at 0.2…

Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
16
Likes
2
Rating
0
P
Printablesthall72

Lego Compatible (2780.dat) Technic Pin with Friction and Slots

This model is compatible with the lego system.

Downloads
3,044
Likes
211
Rating
5
P
Printablesthall72

Lego Compatible (99780.dat) Bracket 1 x 2 - 1 x 2 Up

This model is compatible with the lego system.

Downloads
1,044
Likes
55
Rating
0
P
PrintablesMarky

DeWalt DWS 780 Zero Clearance Insert

Zero Clearance insert for DeWalt DWS 780 miter saw. I printed it in PLA+ with 80%+ infill. If you have smaller printer like me (Bambu X1C), insert can be cut in half with Plug connectors (4mm in diameter, 8mm deep). I recommend use 0.20…

Downloads
713
Likes
68
Rating
0
P
Printablesmshipman

Cisco 7800 7841 IP Phone Wall Mount Bracket

The official Cisco part for wall-mounting 7800-series IP phones has been getting increasingly scarce and expensive as of late, so I set out to make a 3D-printed alternative for use at work. Additional Materials Needed: - 2x M3x6 machine…

Downloads
664
Likes
23
Rating
5
P
PrintablesRingbaer

Knipex Cover 7803125/ 7861125

This is a small protective cover designed for the Knipex side cutter 78 03 125 (without lead catcher). When applied, the cover locks the pliers in the closed position, ensuring safety and convenience during storage or transport. Printing…

Downloads
271
Likes
52
Rating
5
P
PrintablesJW

Medtronic 780G holder

Special design to replace the clip for the 780G easy placing on the side of a trouser border. Best material to use is CPE of PC

Downloads
249
Likes
15
Rating
0
P
PrintablesinfiniteWays

Logitech K780 Multi-Device Keyboard - Battery Cover

This is a replacement for the cheap battery cover of the Logitech K780 keyboard. It's quick and dirty and far from perfect, but it does the job :)

Downloads
236
Likes
14
Rating
4.67
P
Printablesthall72

Lego Compatible (61780.dat) Container 2 x 2 x 2 Crate

This model is compatible with the lego system.

Downloads
214
Likes
31
Rating
0

GM 7808385 Horn Contact Retainer

If you ever need to open your tilt-telescopic steering column, such as to install a new turn signal switch, you will find that this part has broken into half a dozen pieces. You can still find them on eBay and Amazon , but if you're like…

Downloads
192
Likes
8
Rating
0
P
PrintablesTwisted Zion

Brunost lokk (Synnøve, Fløtemysost 480g og780g)

Tight lokk til Synnøve fløtemysost, slik at den ikke tørker ut.

Downloads
166
Likes
7
Rating
0
P
Printablestaxilian

Yaesu mounting bracket for 8800/8900/7800/7900 and others

This is a mounting bracket which fits the yaesu 8800, 8900, 7800, 7900, and probably others. When printed with ABS this is surprisingly strong (3mm walls probably help), but you will likely need longer screws than the ones you might (or…

Downloads
148
Likes
9
Rating
0
P
PrintablesJuansr87

Dewalt Dws 780 dust collector

este es mi modelo de colector de polvo basado en Fisher shop el de el es de Bosch el mío es de Dewalt en el frente se ajusta perfecto después de 8 pruebas con corte de laser y no necesita hardware adicional para anclarse de usan las…

Downloads
125
Likes
15
Rating
0
P
PrintablesKaosuNeko

DC-DC LTC3780 module DIN rail mount

DC-DC LTC3780 module DIN rail mount Mount of excellent DC-DC sepic converter Compatibility: DC-DC LTC3780 35mm DIN rail Mounting components: M3 screws M3 stand Thanks to Joël P for making a LTC3780 model. If there are any licensing…

Downloads
124
Likes
26
Rating
5
P
PrintablesEa3hgl

Soporte Yaesu Ft7800/Support Yaesu Ft7800

Soporte para la FT7800 para atornillar a la pared/Support for FT7800 to screw to the wall Print instructions Category: Electronics Summary Soporte para la FT7800 para atornillar a la pared/Support for FT7800 to screw to the wall Print…

Downloads
122
Likes
14
Rating
5
P
PrintablesPTZ-M

Peugeot-Citroen Mousse d Etancheite Collect Rh 9676168780

Hood seal / Windscreen support. The insert needs to be adjusted with a knife!

Downloads
122
Likes
16
Rating
0
P
Printablesthall72
Downloads
120
Likes
17
Rating
0
P
PrintablesKRtekTM

ČD Btax780 H0 (1:87)

* NOT COMPLETED YET * Category: Vehicles

Downloads
119
Likes
19
Rating
4
P
PrintablesDigitalArk

DeWalt TSTAK Deep Box (DWST17806) Gridfinity Base

Custom Gridfinity base perfectly fits DeWalt TSTAK Deep Box (DWST17806). Prints in 7 smaller parts to fit smaller printers. Base accepts magnets for extra stability if desired. Stash taller parts in irregular spaces between gridfinity…

Downloads
106
Likes
21
Rating
0
P
PrintablesBlack-Villain

Poulan/Husqvarna Fuel Tank Grommet (574678001)

Print in TPU or similar for flexibility and fuel resistance, also recommend using some gasket maker/RTV to be safe.

Downloads
103
Likes
9
Rating
5
P
Printablescsmorphew

Adaptex ASR-7805 40mm fan mount

40mm Fan mount for Adaptex ASR-7805. Card is recommended in NAS Killer 6.0 build guide from serverbuilds.com. The HBA needs a cooling fan and this will mount a 40mm fan to the heatsink.

Downloads
94
Likes
6
Rating
0
P

HP Workstation DC7900 DC7800 8000 8100 Z400 Z600 HDD Disk 3,5" Brackets Screw

You lost your HP workstation mounting screws? Just print 4 of these :D It's not perfect, but it works :)

Downloads
84
Likes
8
Rating
0
P
PrintablesBouli

Skadis Knipex Snipper 7803125

I made a remix of the Skadis Knipex Snipper for 2 to just hold 1 7803125 snipper.

Downloads
84
Likes
13
Rating
0
P
PrintablesChris Giesen

t-stack / CMST17804 VERSASTACK Double Shallow Drawers metric wrench holder

it takes about 42 hours to print on my ender5 plus at 10% infill you will need to cut it in parts for smaller printers

Downloads
79
Likes
18
Rating
0
P
PrintablesDragonwizord92

Minisforum EM680 / EM780 Reference model

Simple reference model I took from the website Everything is based off of the a picture and scaled to the size of the USB port From Minisforum Website It's not good enough for a clearance fit But it will get you in the ballpark

Downloads
76
Likes
3
Rating
0
P
Printablessftblw

Gridfinity magnet base plate for DeWALT T-STACK with 2-Shallow Drawers (DWST17804)

Gridfinity Magnet Baseplate for DeWALT T-Stack with 2-Shallow Drawers (DWST17804). Designed to fit in the guardrail slots of dividers. It was created with Gridfinity Workbench, which is a FreeCAD addon. Then, I added holes to fit the…

Downloads
75
Likes
17
Rating
5
P
PrintablesCoolDuke

Lab Bench Power Supply Enclosure (LTC3780)

because I didn't find an appropriate enclosure for my PSU project, I decided to make my own. fits really nice but printing takes a while. had some issue during print with ABS warping, but finallay fixed it some ABS glue - hence the…

Downloads
69
Likes
9
Rating
0
P
PrintablesZachW

Atari 2600/7800 dust cover

Protect your console cart port from dust ect. Use supports, obviously. I do 3 walls minimum on all prints. 15% Infill.

Downloads
66
Likes
3
Rating
0
P
PrintablesDa9L

Minisforum UM780 XTX Wallmount

This simple print will let you mount your UM780 XTX to a wall etc. It is open where needed for ports and vents I've printed mine in PETG, 0,2mm Quality preset. 4mm holes, 69mm apart Unlike my previous model for UM690, I've made this model…

Downloads
65
Likes
5
Rating
0
P
PrintablesDa9L

Minisforum UM780 XTX LED plate

The plate is 1 mm thick, which is a bit more than the sheet that comes with the computer, but it fits nicely. I printed mine at 0.2 mm and used some black PLA Unlike the original i haven't added any adhesive to hold the plate as its hold…

Downloads
64
Likes
4
Rating
0
P
PrintablesPurchenZuPoden

DC-DC LTC3780 MODULE SELF-ADHESIVE MOUNT

This is a LTC3780 DC-DC Converter PCB SELF-ADHESIVE MOUNT. KaosuNeko , thank you very much for the orignal design!

Downloads
63
Likes
5
Rating
0
P
PrintablesKyson

missing part 99780

Print 2x 99780 in grey as per the original models parts list. Double check the scale relative to the original pieces to ensure fit.

Downloads
58
Likes
5
Rating
0
P
PrintablesLazy Cat

Mini Bench Power Supply With Fan (LTC3780)

Recently a friend of mine linked me the original model that i remixed this from as i did not have a bench power supply, and do not really have the cash for buying a proper one, so i decided to do this as my first “big” electronics/3d…

Downloads
53
Likes
7
Rating
0
P
PrintablesBertmag

GeForce GTX 780 Ti Backplate (also 980, Titan, etc)

I was getting frustrated that I couldn't find a backplate for my 5 year old video card, so I said to hell with it and made my own. I made this for my EVGA 780 Ti video card, but this ought to work with the 780, 980/980 Ti, and Titan…

Downloads
51
Likes
1
Rating
0
P
PrintablesDesignCraft

Ford Cup Holder Panel Mat - 1L2Z-78046B76-AAA

This cup holder panel mat was designed based on Ford part number 1L2Z-78046B76-AAA and should be compatible with the following vehicle models: Ford Edge: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 Lincoln MKX: 2007, 2008, 2009, 2010…

Downloads
48
Likes
5
Rating
0
P
PrintablesMarkus Hein

XFX Speedster MERC 319 Radeon RX 7800 XT BLACK Edition Shroud Mod

Modified some files to fit the XFX Speedster MERC 319 Radeon™ RX 7800 XT BLACK Edition

Downloads
47
Likes
3
Rating
0
P
PrintablesOldManHomer

HP 578006-001 Tool-less Drive Caddy

HP 800 G1, 8000, 8100, 8200, 8300, Ultra Slim USDT Hard Drive Caddy Tool-less Category: Parts

Downloads
46
Likes
2
Rating
0
P
PrintablesLukas Tichy

Bruder Lexion780 rear axle

Spare parts forl Lexion780TT. My printed setting: Material: ASA Layer Height: 0.2 Infill: 40% Wall count: 4 Solid top/bottom layers: 5 Need support for print. Postproces - glue two pins to bottom.

Downloads
46
Likes
3
Rating
0

Atari 2600/7800 Cartridge Display Stands

To assemble you will need to print our nut hammer and 4, 10x32 nuts and ½" screws If you don't have a 3D Printer I can make it for you from my stores on eBay and etsy etsy - http://www.16bitgamestore.etsy.com/ eBay -…

Downloads
46
Likes
6
Rating
0
P
Printablesejpman

LM7805 Mosfet

Created from this data sheet ( https://www.sparkfun.com/datasheets/Components/LM7805.pdf ) to be used when modeling a circuit board if needed. Category: Electronics

Downloads
45
Likes
2
Rating
0
P
PrintablesSoren

G.SKILL Ripjaws KM780 Feet replacment keyboard feet

Standing feet replacment for G.SKILL Ripjaws KM780

Downloads
44
Likes
1
Rating
0
P

Atari 7800 Modular cartridge Display stand

Files to Print Required Print the appropriate files named "[region]_Display_Bottom" for the cartridges you want to display. Then for each additional cart, you can print the files named "[region]_Extension_Cartpiece", and simply screw them…

Downloads
38
Likes
3
Rating
0
P
Printablesnicodemus26

Dewalt DWS780 Compound Miter Vacuum Hose Adapter

I couldn't find a reasonable adapter online, so I made this one. It should be printed in place without supports using PETG in the photos. I used 30% hexagonal infill, but less might do. You may be able to increase the miter-side clamping…

Downloads
35
Likes
5
Rating
0
P
PrintablesCaballero229

Heavy Duty Lenkstange Claas 780 Lexion Happy People

Falls eure Lenkstange auch bricht, baut diese ein. Passt ohne Modifikationen

Downloads
35
Likes
1
Rating
0
P
Printablesworwi

Yaesu FT-7800 Dial knob cap

Cap for Yaesu FT-7800 dial knob (Should fit for 6mm, with 4.5mm cut knobs, i.e channel knob in FT-897).

Downloads
35
Likes
3
Rating
0
P
PrintablesK Bogle

Stackable Atari 2600/7800 Game Storage – Support-Free Print with Dust Covers

🕹 Stackable Atari 2600/7800 Game Storage – Support-Free Print with Dust Covers Preserve your Atari legacy with this custom-designed, stackable storage solution for 2600 and 7800 cartridges. Each unit is built to hold individual games…

Downloads
34
Likes
8
Rating
0
P
Printableschking

Logitech K780 Laptop

This print combines the Logitech K780 keyboard with a tablet to create a laptop computer by locking the keyboard and tablet together. By locking them together you can use the tablet much more comfortably on your lap. The back braces are…

Downloads
34
Likes
14
Rating
0
P
PrintablesMaadmatt

Atari 2600 and 7800 Cartridge and Instuctions Holder

I purchased a new Atari 2600+ Pac-Man Edition and several new games, and wanted a holder that not only stored my cartridges but also the instructions. I designed this holder to be printed on a Prusa Mini+ without supports. It is quite a…

Downloads
33
Likes
3
Rating
0
P
PrintablesJames Green

DeWalt DWS780 Miter Saw Dust Port Adapter to DXV09P Shop Vac

I couldn’t find an STL to connect my DeWalt DWS780 miter saw to my DeWalt DXV09P shop vac, so I made one. This adapter is designed to improve dust collection and provide a snug fit between the saw and vacuum hose. It was one of my first…

Downloads
33
Likes
4
Rating
0
P
PrintablesMurdogk

lego 36840 36841 99781 99780 2436 99206 87609 64570

lego 36840 36841 99781 99780 2436 99206 87609 64570

Downloads
33
Likes
3
Rating
0
P
PrintablesStanley

Mini-ITX bracket for NVR board NBD7808R-PL

This is bracket for NVR board NBD7808R-PL. Thank to this bracket, NVR board can be easily installed to Mini-ITX case. Print instructions Rafts: No Supports: Yes Resolution: 0.3mm Infill: 40%

Downloads
32
Likes
1
Rating
0
P
PrintablesSophia

Dual phone holder with MagSafe stand for Logitech keyboard K780 or K480

Mobile phone holder for Logitech keyboard K780 or K480. With MagSafe to charge one of the two mobile phones.

Downloads
32
Likes
9
Rating
0
P
Printablesck4xa

RCPROPLUS SupraX 7808 (S7) TPU Protection Cap

This is a RCPROPLUS SupraX 7808 (7 mm bullet, S7) Connector Protection Cap. It's designed to be printed out of TPU, and should not need supports to print, as the overhangs are all > 40 degrees.

Downloads
30
Likes
2
Rating
5
P
PrintablesTBII78

Makita DRS780 Circular saw vacuum Adapter for Karcher vac hose

Vac hose adapter for Makita ripping circular saw made from TPU. Printed on 0.2 layer height with some infill. Picked TPU as it s a bit more flexible than PETG and wont let the hose go that easily.

Downloads
29
Likes
3
Rating
0
P
PrintablesAholz

DeWalt DWS780 Unlock Pin Knob

Simple print and slide on model, better feel then factory pin. Textured grip and smoother edges. Great little upgrade for the Dws780 saw.

Downloads
28
Likes
6
Rating
0
P
Printablesbob Odenkirk

Lego (2780) Technic Pin with Friction

Lego (2780) Technic Pin with Friction

Downloads
28
Likes
6
Rating
0
P
Printablesarovod

PowerColor 7800 XT Fighter NF-A9x14 fan mount

Print for mounting Noctua NF-A9x14 fans (frame removed) to PowerColor 7800 XT Fighter GPU (potentially other models as well, not tested).

Downloads
27
Likes
1
Rating
0
P
PrintablesMuszka_

mount for dell optiplex 780 usff under table

easy to print mount for dell optiplex 780 usff Print with PLA 30% gryroid infill / ABS/PET-G 25% gyroid infill (i printed it with PLA) doesn't require supports Happy Printing :)

Downloads
27
Likes
2
Rating
0
P
PrintablesHashtag_Francis

Portable AmpRipper 3000 7800mA LiPo Project Case

Just a little USB battery bank I drew up and 3D printed. The enclosure is designed to fit three 18350 lithium-ion cells (WIRED IN PARALLEL) and an AmpRipper 3000 v1.0 from Kickstart Design (Link below). Assembly is very easy. First, plug…

Downloads
26
Likes
13
Rating
0
P
PrintablesMTB3D

780mm beer holder

This was a project for the course advanced prototyping at TU Delft. With the help from Joris from Protospace, we fixed two old ultimakers togheter, adjust firmware, and let them print at the same object in 1 print! Check out the…

Downloads
26
Likes
1
Rating
0
P
Printableshjembaek

Kitchen Aid Toaster 5KTT780 Knob 4176838

This is a custom-designed replacement knob for KitchenAid toasters 5KTT780 part 4176838 . The model is designed for durability and precise fit and has been optimized for 3D printing in polycarbonate (PC) . It is intended as a functional…

Downloads
25
Likes
2
Rating
0
P
PrintablesJay S

Logitech K780 Phone adapter

I bought a Logitech K780 keyboard and can fit most phones without a case in the slot but as soon as I put a case on my Pixel 10 pro it no longer fits. made this little adapter for a wider slot to fit my phone. It also has carve out for…

Downloads
24
Likes
4
Rating
0
P
Printablesleadinglights

Printer control panel with HD44780 display and SD card

Although there are many LCD controllers for the RepRap, there are fewer with a memory card that can easily be removed. Most of the SD adaptors are difficult to mount into a box and the micro SD format is uncomfortably small. Although the…

Downloads
24
Likes
0
Rating
0

Atari 7800 Composite Mod Mount Kit MK II

This is a Mounting Kit for a 4 Pole Female 3.5mm headphone jack, to solder into a Composite Video Mod, intended to replace the Atari 7800's RF modulator. The idea is, instead of drilling holes into your 7800, you would replace the RF…

Downloads
24
Likes
6
Rating
0
P
PrintablesIgor

LTC3780 Step Up/Down Converter Case

Simple case for a rather popular LTC3780-based board from Aliexpress e.g. this one: https://aliexpress.com/item/1005009222609081.html It features a place for a 4cm fan in the lid, though you might need a separate power source to feed it,…

Downloads
23
Likes
2
Rating
0
P
PrintablesJA-Garcia

Atari CX-2660-7800 Acturador

Print upside up 75% Infill Supports - YES

Downloads
21
Likes
4
Rating
0
P
PrintablesHami

Pen holder for " edding 780 "

Stifthalter für edding 780 Lackstift , oder andere Stifte mit unter 12mm Durchmesser ------------------------------------------------------------------------------------------------------ Pen holder for edding 780 , or other pens with a…

Downloads
20
Likes
2
Rating
0
P
Printablesko

Dishwasher Dishrack Roller WP99002780

Dishwasher Dishrack Roller WP99002780 Suitable for when the bracket is still ok, but the wheel has broken. Snug inner fit, consider filing inside slightly depending on your printer settings.

Downloads
20
Likes
0
Rating
0
P
Printablestheory

BenQ EW2780 Monitor Riser

BenQ EW2780 Monitor Riser - 45mm lift

Downloads
20
Likes
1
Rating
0
P
PrintablesDIll

Minisform EM780 Case

Work in progress. Power button needs work and I need to add a backplate

Downloads
19
Likes
0
Rating
0
P
PrintablesDanielRA

Logitech K380 / K780 vertical desk stands

A vertical desk stand for Logitech K380 and K780 keyboards. These little legs don't take much room when unused, but it can free up a lot of desk space by placing the keyboard vertical. This is a remix of smogan71's “K380 wall mount for…

Downloads
19
Likes
2
Rating
0
P
PrintablespepOo

MiniMed 780G Protective TPU Case — FreeCare DIA (v1 Beta)

Features - Full wrap — covers back, sides, top and bottom - Large front window — full access to the screen and the navigation buttons - Rear keyhole slot — works with the original slide-on belt clip - Top opening (Ø24 mm) — clears the…

Downloads
19
Likes
1
Rating
0

BenQ GW2780 low profile mount

I move the monitor a lot and lost the original base

Downloads
18
Likes
1
Rating
5

MiniMed 780G Insulin Pump Replica

This life-size, non-functional replica of the MiniMed 780G insulin pump is designed to help you make custom pouches, holders and other accessories. Most of the model was captured using a high-resolution 3D scan. The transparent reservoir…

Downloads
17
Likes
1
Rating
0
P
PrintablesKraiden

Ayaneo Next Logitech K780 stand

A stand for the Ayaneo Next that slots into the phone/tablet stand on the Logitech K780, so you can play games that require a mouse and keyboard on the go. Works fine, just be careful when you pick the device up out of it, I somehow…

Downloads
17
Likes
3
Rating
0
P
Printablesjon

Radeon 7800XT fan shroud adapter 120mm asrock challenger OC

This a fan shroud to replace the standard 95x10mm fans with 120x25mm ones, I used Arctic Cooling P12 PRO ones because it have a very good cost/performance ratio. The main idea it's to use their high static presure to blow aire using a fan…

Downloads
16
Likes
5
Rating
0
P
PrintablesFreddyZ

XFX Merc RX7800xt shroud

A simple custom fan shroud for XFX Merc Series graphics cards of the RX7000 series. Low profile, accepts any 120mm fan using M3 hardware. Uses M3 threaded inserts (d=~4,2mm, L<7mm). Includes optional flexible exhaust duct (soft TPU).…

Downloads
15
Likes
1
Rating
0
P
PrintablesLegacy_Micro

Compaq Armada 7800 CF/HDD Adapter

Compaq Armada 7800 CF/HDD Adapter --------------------------------------------------- Adapter to fit an old hard disk to Compact Flash card. This fit the Compaq Armada models: 7700 7800

Downloads
15
Likes
0
Rating
0
P
PrintablesPineapple Dan

Mount kit for 80mm HD44780 2x16 character displays

Panel version is not really made to be printed seperately but incorporated into a panel/lid

Downloads
14
Likes
1
Rating
0

3M 7800 Harness Pin

Print with or without supports. Either way requires cleanup. First try was slightly long, but still fits, and is easier to reattach the strap to. Use “Short” version for tighter fit, untested. Took me 5 minutes to put together.

Downloads
14
Likes
3
Rating
0
P
Printablescrasbe

Volvo Cover Washer and Gasket (8250235, 30751307, 9207806)

When converting a vehicle from Manual to Automatic or to Electric, the clutch master cylinder is not used anymore, leaving a hole in the firewall. Automatic cars came with a cover washer in place of the master cylinder, but it appears to…

Downloads
14
Likes
1
Rating
0
P
PrintablesSirMoose65

Shark SV780 Vacuum Dust Cup Release Button

Worked this up to repair a coworker's vacuum. This may work on other models of Shark vacuums, but I do not have them for testing. I printed this in both PLA and PETG and both work fine. I used 5 walls and 25% infill for added strength.

Downloads
13
Likes
1
Rating
0
P
PrintablesWolfsbora

Universal game display stand - Sega Genesis/Mega Drive/SNES/Super Famicom/Game Boy/GBA/DS/3DS/Switch/Famicom/NGPC/Atari Lynx/Game Gear/Atari 2600 & 7800

This tiny cart display stand is the smallest you will find. I made sure there is just enough gap between the back rest and the lip for most cartridges. The non-card type cartridges look like they are floating due to the tiny size. The…

Downloads
13
Likes
3
Rating
0
P
Printablesstefanmader1984

Playmobil7106780 2 - 6551575

Playmobil7106780 2 - 6551575

Downloads
11
Likes
6
Rating
5
P
PrintablesMr.Ten

NVR780 Rain Cover

Simple rain protection for your NVR780 To shape it perfectry to your wall use hair dryer or air heat gun to softern plastic. Attached to the cover via dual sided tape.

Downloads
10
Likes
0
Rating
0
P
Printables3uDo

Halterung für Dremel 780 / holder for Dremel 780

Haben diesen Ständer/Halter gemacht um mehr Platz auf der Arbeitsfläche zu haben. Denn stehend braucht der Dremel 780 wesentlich weniger Platz. Man muss lediglich den Aufhängbügel entfernen. Bei mir egal da ich ihn sowieso nicht hängend…

Downloads
10
Likes
0
Rating
0
P
PrintablesReleud

DELL OptiPlex 7780 AIO camera fix

I printed from PETG with a layer of 0.12 mm, infill 80%.

Downloads
10
Likes
0
Rating
0
P
PrintablesREMLURELMI

Display Stand for Enovation/Murphy PowerView/HelmView 780 & 780B

Desktop stand for a PV780, or PV780B, or HV780 display. Includes holes for 8-32 mounting screws, or bezel mount. Recommended print settings: Layer Height: 0.2 mm or less Infill % : 15% Supports: No Print Orientation: Default as modeled…

Downloads
9
Likes
0
Rating
0
P
PrintablesLavenderFox

Riverbed CX780 Rack Ears

As long as you don't intend on hanging by these, they work to at least index and secure the Riverbed unit in place. In case you're not like me and have other bolts than 20mm M4-0.7 screws for your Riverbed, I've included the f3d file to…

Downloads
9
Likes
1
Rating
0
P
PrintablesPaul Feher

Bloomberg KQD1780 refrigerator

Plastic part that turns part of the door.

Downloads
9
Likes
0
Rating
0
P
PrintablesMamengineer

Pop! Compatible Backplate for thing:3127804

Makes www.thingiverse.com/thing:3127804 compatible with Pop! devices. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: NovaMaker PLA Category: Mobile Phone

Downloads
9
Likes
0
Rating
0
P
PrintablesPhillJeu

Niko 101-78010 cache

This Niko switch 101-78010 lights our bathroom automatically. Nice except during the night when you do not want any light ! This simple cash solve my concern. PLA is a good choice.

Downloads
9
Likes
1
Rating
0
P
PrintablesBlitz City DIY

NAU7802 Food Scale

Housing for the NAU7802 Food Scale project. Category: Electronics

Downloads
8
Likes
0
Rating
0
P
Printablesstefanmader1984

playmobil7116780 1 - 6551580

playmobil7116780 1 - 6551580

Downloads
7
Likes
5
Rating
5
P
PrintablesTaco_Ranger

Saluspa Bestway Hot Tub P05343 Filter Housing to P07805 Filter Housing Adapter

This adapter lets you convert the Bestway Saluspa Hot tubs using the P07805 filter housing to the more common and available P05343 housing with screw threads. I ran into this issue with my saluspa hermosa inflatable hot tub that uses the…

Downloads
6
Likes
0
Rating
0
P
PrintablesMarco87

Makita DRS 780 Adapter Absaugung

Konnte keinen passenden Adapter für meinen Staubsauger finden also habe ich diesen hier entworfen. Adaptiert von 34mm am Staubsauger auf 27,3mm an der Handkreissäge. Gedruckt in TPU 95A mit 20% Füllung.

Downloads
5
Likes
0
Rating
0
P
PrintablesAndrew Mauk

Phone Mount for Multiboard (Cortelco 8780)

This is just a simple phone Mount for my office phone. I know it works for the Cortelco 8780, but probably works for many others with the same distance on the keyholes.

Downloads
4
Likes
1
Rating
0
P
Printablesdsfrancis

Atari 2600/7800 Single Game Cartridge Wall Mount

Since shelf space is limited for me, I wanted a way to get some games off my shelf and display them. I had seen/tried other similar items out there, but they all seemed to be too big/bulky and use too much filament, so I decided to create…

Downloads
4
Likes
2
Rating
0