Search results: 900

Sort order

1,080 models

Airbus 350-900

1:200 Desk Model of the Airbus 350-900. The .3MF file contains the parts for the print. Wingtips were printed with supports

Downloads
655
Likes
62
Rating
0
P
PrintablesVisualReversal

Corner Mount for Hue Motion Sensor Model #9290012607

For years now I've had a ratty nail going through the magnet to hold my Hue motion sensors in the corner. It not only looks janky, it doesn't stay put very well. Then, I got a 3D printer. i checked out a few models online, but I didn't…

Downloads
582
Likes
50
Rating
4.8
P
Printablesmorf

Walksnail VTX HD Avatar kit mount AR wing 900 sonicmodel

This is a solid platform for mounting your Walksnail hd Avatar VTX kit to Sonicmodel AR wing 900. Fits perfectly nose for session camera. Just use a couple of drops of UHU Por to glue it to EPP. I strongly suggest to print it from at…

Downloads
252
Likes
15
Rating
0
P
PrintablesJorgeavm125

Router Lever Makita RP0900

Makita RP0900 Router Lever. I have a Makita RP0900 Router and, as a result of continuous use of the tool, one day the lever used to adjust the depth of the milling cutter was broken. I found the solution in my 3D printer. I designed the…

Downloads
128
Likes
14
Rating
5
P
PrintablesTeo_211

Bombardier CRJ-900 Wall Art

Bombardier Canadair Regional Jet 900 Wall Art Silhouette model. Adjustable size. I accept model suggestions.

Downloads
95
Likes
19
Rating
5
P
Printablesmorf

Walksnail VTX NANO Avatar kit mount AR wing 900 sonicmodel

This is a solid platform for mounting your Walksnail Avatar with NANO camera kit to Sonicmodel AR wing 900. Fits perfectly nose for session camera, if you want completely get rid of nose view in camera, you have to slightly trim the epp.…

Downloads
73
Likes
2
Rating
0
P
Printablesaaronp18

Nespresso Vertuo Plus Replacement Capsule Container Krups XN900 MS-624276

I picked up a second hand Nespresso Vertuo Plus which was missing the rear capsule catching container so I decided to print one! My print bed is 210mm so it doesn't quite reach the top, but that's ok, capsules still fall in correctly. I…

Downloads
60
Likes
5
Rating
0
P
PrintablesJohn W

Case for RAK wisblok 19007 and battery, meant for meshtastic use

I purchased a Meshtastic starter kit for a RAK19007 WisBlock (and RAK4631) with a 12x40x65mm battery, only to not be able to find a case that fit that battery. This is my solution. This case features thin spots over the LEDs so you can…

Downloads
27
Likes
2
Rating
0
P
PrintablesMechatronics

Ninja Professional 900 Watt Blender Handle

This Ninja Blender allows you to turn the blending capsule into a cup. When you make a smoothie though, it gets quite slick from condensation. This handle fits both the small and large capsules.

Downloads
27
Likes
4
Rating
0
P
Printablessamh

Asus AC2900 VESA Mount

A quick and dirty mount for an Asus AC2900 router to fit behind your TV using the VESA mounting points. You will need: M3 x 30 mm screws - minimum 4 off M6 x 25 mm screws - minimum 1 off Customise: The model has not been made easy to edit…

Downloads
26
Likes
3
Rating
0
P
PrintablesPachuc

Soldering tip box for Hakko 900m/907/908/936

Soldering tip organizer that allows you to store 5 tips in one of the most popular standards among DIY enthusiasts. The distances between the pins allow you to store tips of different types, not necessarily conical ones. The heavy base…

Downloads
14
Likes
0
Rating
0
P
PrintablesKaxna

ETA Vital Blend 3100 90000 - vicko

Víčko na mixér ETA Vital Blend 3100 90000

Downloads
13
Likes
0
Rating
0
P
PrintablesHenk

PocketDock for Philips MiniRTE 9000 Hearing Aids

Description The official charger for the Philips MiniRTE 9050 hearing aids is massively oversized —perfectly fine at home, but far from ideal when traveling. Since I already carry a universal USB-C charger for my iPhone, iPad, and Apple…

Downloads
6
Likes
5
Rating
0
P
PrintablesDokkie

Wheel for shortening television antenna VILLAGE MOON–V900

Small wheel for shortening this TV antenna . It's used on campervan, but can be used anywhere. Might need a bit of modifying, because the teeth don't allow the antenna to stay paralel. Printing instructions Layers: 0,20 mm but doesn't…

Downloads
5
Likes
0
Rating
0
P
Printablesbeerwema

Sigma BC900 Bicycle computer holding plate adapter plate bike mount

I recently bought an old bike which included a Sigma BC900 bicycle computer for logging speed, distance etc. After some cleaning, the computer itself worked like a charm, however, the plastic mount has seen better days. There is a small…

Downloads
0
Likes
1
Rating
0
P
PrintablesMartin_au

Chip Clip 9000, Standard and easy-open versions

A quick and easy chip clip. Has a tab for easy release and two lock positions for those extra chunky chip packets. Update: Added a slightly shorter, wider version. Update: Added versions designed for easy opening and a super-short version.

Downloads
7,274
Likes
1,478
Rating
4.93
P
PrintablesTonyG

RAK19007/RAK5005 case for Meshtastic

**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…

Downloads
5,568
Likes
454
Rating
4.95
P
PrintablesTonyG

RAK19007-mini/RAK5005-mini case for Meshtastic

**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…

Downloads
2,336
Likes
272
Rating
4.92

Steering PAD 900-F

Check LOG bellow for changed parts! _ INTRODUCTION This controller is a 3-axis + 15-button HID, designed with Euro Truck Simulator 2 in mind. It also works with other games. The steering wheel has 900 degrees of rotation and force…

Downloads
2,230
Likes
153
Rating
5
P
PrintablesWaschtl

GPU Holder Max Pro 9000 [Parametric]

This is a little threaded GPU Support i made in Fusion360. Adjustable from 56mm to 96mm. You can customize the height / thread length in the provided Fusion360 file.

Downloads
1,727
Likes
115
Rating
4.75
P
PrintablesChris Borge

Heat Set Insert Torque Arm Gripper Insert Installer 9000

Vague for the next week im leaving for the outback in a few hrs. Requires a 65mm length .3mm thick brass strip 12mm wide and a way to drill a 3mm hole in it. Build Guide WIP sorry, but at least its here this time! Im back the 25th at the…

Downloads
1,479
Likes
595
Rating
5
P
PrintablesMoffKalast

BSG Battlestar Artemis 1:9000 Scale

I've cleaned up the mesh for 3D printing, closed volumes, etc. Sliced into 5 pieces for ease of printing. Thanks to Eddy_1701 for providing and converting the base mesh to a workable format. Neither of us holds any rights to the mesh, I'm…

Downloads
1,479
Likes
168
Rating
5
P
PrintablesTonyG

RAK19003-micro case for Meshtastic

**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…

Downloads
1,472
Likes
185
Rating
4.91
P
PrintablesTonyG

RAK19003 case for Meshtastic

**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…

Downloads
1,414
Likes
134
Rating
4.83
P
Printablesstokey3D

Meshtastic RAK19007 WisBlock Case

This RAK19007 WisBlock case is designed to be super rugged and printed in ABS to withstand higher temperatures. Recommendations: Use 4 walls and 15% infill for all Top and Bottom Plates - Use supports Insert - Use supports Shell - Use…

Downloads
1,208
Likes
168
Rating
5
P
PrintablesTuckie

Wolfbox G900 Pro Wire Cover

Slides in between the OEM mounting plate (required) and the display. Print with the front facing down so you can get a nice finish. (Will require support)

Downloads
1,006
Likes
43
Rating
0
P
Printablesmonev44

Hands-free Counting Machine 9000 v1.2

Version 1.2 changes Reworked the selector ring to be less likely to catch on the ratchet springs when changing modes. Added modeled knurling to the thumb screws and nuts. Reworked link part to multiple parts to better optimize for layer…

Downloads
978
Likes
976
Rating
4.7
P
PrintablesAndrea vianello

Dummy 13 900%

hello, this is my personal interpretation of a 900% remodeled dummy 13. taking inspiration from @Depep1 with his 600% version I asked myself: but how much bigger can I make it? so I got to work to make this remix: this version has in the…

Downloads
923
Likes
253
Rating
0
P
PrintablesSJB4127

Calibration Tower - Pressure Advance (M572) or Linear Advance (M900)

;tldr - Quick Start: Select the model (! Use Prusa Slicer 2.6.0 or newer ! ) - “Direct Drive” for the MK4 or “Bowden” for the Mini+., Additionally, you can select a layer height to test. Simply load the file in Prusa Slicer and slice the…

Downloads
900
Likes
88
Rating
5
P
PrintablesStale

Replacement Side Cover for Sony WH-XB900N

Replacement part that I designed to save my headphones. Other replacement parts were either out of stock or too expensive so I made my own. Assembly Fold the ear cup in and remove the 2 black screws near the swivel joint. Separate the…

Downloads
879
Likes
45
Rating
5
P
PrintablesAngry Mum

Airbus A350-900 Full Size 1:1 Model

Mostly accurate Airbus A350-900 model

Downloads
851
Likes
35
Rating
5
P
PrintablesMoffKalast

BSG Cylon Basestar 1:9000 Scale

Remix of this mesh on thingiverse, which starts out with the basic shape, which I've smoothed out to a high poly mesh, then added approximate cut-out details from reference photos. It's symmetrical, so one can print half of it twice and…

Downloads
847
Likes
90
Rating
5
P
PrintablesTonyG

PocketMesh R2 case for Meshtastic (RAK19007)

**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken ( https://www.3dchicken.co.uk ) These…

Downloads
826
Likes
108
Rating
5
P
PrintablesBr4unK3ks

Chip Clip 9000 - Text removed

Did the remix for both the regular and small size. I really like the functionality but the text kind of annoyed me a little as i am not a huge fan of text on my prints that isnt necessary. Other than that Martin_au did a great job…

Downloads
811
Likes
76
Rating
4.78

NodeBrix Modular Case System for Heltec LoRa32 v3 and RAK19007 for use with Meshtastic

Update 5-29-24 Updated 18650 suction cup backs for less supports. ----------------------------------- Update 5-22-24 Uploaded large encoder knob STL that I forgot to include. ----------------------------------- NodeBrix Modular Case…

Downloads
745
Likes
137
Rating
4.5
P
Printablesnano

RAK19007 WisBlock Base Board Mount

RAK19007 WisBlock Base Board mount with 4mm mounting holes that fits an electronics base board with a 5mm grid spacing.

Downloads
729
Likes
65
Rating
5
P
PrintablesJosé Pedro

Kenworth W900 Truck - Iconic Semi-Truck Model

Celebrate the spirit of the open road with this 3D printable STL model of the Kenworth W900 Truck. This iconic semi-truck model is perfect for truck enthusiasts and model builders looking to display a classic piece of American trucking…

Downloads
690
Likes
68
Rating
0
P
PrintablesMoffKalast

BSG Adamant Frigate 1:9000 Scale

I've cleaned up the mesh for 3D printing, closed volumes, etc. Sliced into 2 pieces for ease of printing. Thanks to Eddy_1701 for providing and converting the base mesh to a workable format. Neither of us holds any rights to the mesh, I'm…

Downloads
663
Likes
79
Rating
5
P
PrintablesV4projects

The RIFF 600/900 large 3D printer

This is a 300x600 (RIFF 600) or 300x900 (RIFF 900) size DIY printer that can be built without spending a fortune. I encourage the use of second hand parts and will not provide any complete BOM listing specific new components. Some key…

Downloads
625
Likes
422
Rating
5
P
PrintablesPlasticyBits

Bearing Press Tools 63800 6802 6900 6902 Bicycle MTB

Bearing Press Tools for 6900, 6902, 6802 Bearings The files marked "Press In" are a remix of bikenerd tools. I just changed the numbering to be on the side so it could be bigger text. The files marked "Press Out" are for pushing the pivot…

Downloads
615
Likes
112
Rating
5
P
PrintablesPhil

Voron 2.4 Roomba 800/900 HEPA Filter Box

A proper filter box for using Roomba 800/900 series HEPA filter in your Voron 2.4 Exhaust. Unlike the other HEPA box posted here, this one fits the original exhaust housing and should use less material. Print with Filter insert side on…

Downloads
604
Likes
117
Rating
4.89
P
PrintablesKoschi

Sepura STP9000, STP9038 and SC2020 Holder

I contacted the Maker of the Model STP9000 and asked to edit it for SC2020. Thanks for your permission chilluniverse@chilluniverse ! Remix for Holder Sepura SC2020 with Speaker. Happy printing! #STP9000 #STP9038 #SC2020

Downloads
602
Likes
16
Rating
5
P
Printableseddie899davis

RAK19007 Radio Style

required equipment power switch of your choice 10000mAh battery gps module ipex to sma connector/wire "soldering/heat shrink m2.5 x 4mm bolts for mounting switch otherwise its the same as the original.

Downloads
597
Likes
74
Rating
5
P
PrintablesMarkus_p

Smokey and the Bandit - Kenworth W900A for the RC SemiTruck

This is a redesign of the awesome truck from ProfessorBoots to look like a Kenworth W900A. I grew up with the movie Smokey and the Bandit and therefore I wanted to have a Kenworth in addition to the Peterbilt. To have the same color…

Downloads
592
Likes
206
Rating
0
P
PrintablesSDHayes

Hadley 114/900 Telescope Remix

My modest remix of Maff's excellent model. Changelog to the original design: Optimized for 100% metric fasteners (ALL M5 unless noted otherwise) Tweaks to the bolt orientations/approach for both mirror holders Removed all of the lettering…

Downloads
562
Likes
111
Rating
5
P
Printablessmogan71

Lenovo Tiny - Vertical Stand | Vertikal Ständer | für bis zu 3x M700q M900q M710q M910q M720q M920q

ENG: Vertical stand for Lenovo USFF Tiny PCs. Works with M700q, M900q, M710q, M900q and presumably oder and newer variants like M720q and so on. As long as the PC is not thicker than 36mm. Made with Tinkercad. GER: Ständer für Lenovo USFF…

Downloads
553
Likes
51
Rating
5
P
PrintablesMoffKalast

BSG Ranger Cruiser 1:9000 Scale

I've cleaned up the mesh for 3D printing, closed volumes, etc. Sliced into 3 pieces for ease of printing. Thanks to Eddy_1701 for providing and converting the base mesh to a workable format. Neither of us holds any rights to the mesh, I'm…

Downloads
521
Likes
72
Rating
0
P
PrintablesOlivier

Meshtastic rugged box for RAK 19007

I remixed the excellent Rugged Box to hold my mobile, temporary installation Meshtastic box. It currently holds 2x 18650 batteries in parallel and has space for 4 magnets so you can stick it to a steel surface. The plate is modeled for a…

Downloads
515
Likes
115
Rating
5
P
Printablesdreimal_8

RAK Starter Kit 19007 enclosure for sma antenna - meshtastic / meshcore

Simple housing with sliding lid with a secure “click” closure. Many thanks to TuTu for the fantastic template! Hint: Switch off via the meshtastic app, switch on by pressing the reset button. This saves an additional switch. Battery: I…

Downloads
501
Likes
53
Rating
4.4
P
PrintablesKBOX Labs

RAK19007 Mounting Plate

v2 Update : A little bit slimmer profile, and some model flaw fixes. Designed as a small profile mount for the Wisblock RAK19007 board from RAKWireless. This will allow it to be screwed to a basic enclosure grid mount found in a lot of…

Downloads
495
Likes
54
Rating
5
P
Printableschylld

TPU Air Duster 9000 (multi-material optimised)

Reprofiled for better airflow, better upper strength, and less TPU usage

Downloads
477
Likes
74
Rating
4.57
P
PrintablesTHRobinson

PS2 SCPH-39001 2.5" HDD Caddy / Tray

I tried using RetroGameRevival's file PS2_2.5inch_HDD_Caddy_GameStar_Full for my PS2 system (SCPH-39001) and it was 2mm too wide on the right and the HDD needed shifted left 1mm in order for everything to line up. Rather than trying to…

Downloads
469
Likes
29
Rating
5
P
PrintablesMoffKalast

BSG Heracles Gunship 1:9000 Scale

I've cleaned up the mesh for 3D printing, closed volumes, etc. Sliced into 6 pieces for ease of printing. Thanks to Eddy_1701 for providing and converting the base mesh to a workable format. Neither of us holds any rights to the mesh, I'm…

Downloads
464
Likes
62
Rating
5
P
PrintablesMoffKalast

SG-1 Asgard Bilskirnir/Beliskner Battlecruiser 1:9000 Scale

The Bilskirnir, also known as an Asgard mothership or Thor's chariot was Supreme Commander Thor's flagship before the O'Neill class was conceived. I've modelled it from reference photos, schematics and all possible material I could find,…

Downloads
464
Likes
84
Rating
0
P
PrintablesGary

Stoeger XM1 Barrel Band (SMK PR900W, Diana Stormrider)

Specifically designed for the XM1 but should fit the PR900W and the Stormrider as they are essentially the same rifle. The problem that I was having is one of a wandering zero after transporting the rifle in a soft case. You can, of…

Downloads
455
Likes
17
Rating
0
P
PrintablesKorbyn

RAK19007 Rugged WisBlock Enclosure

RWE (Rugged WisBlock Enclosure) is a remix of the open-source ruggedized T-Beam enclosure, now for the RAK19007 WisBlock base board with RAK4631 (LoRa) and RAK12500/1910 (GNSS/GPS) modules. This induces a couple important build and…

Downloads
419
Likes
78
Rating
4
P
PrintablesTonyG

PocketMesh R2-XL case for Meshtastic (RAK19007)

**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…

Downloads
418
Likes
63
Rating
5
P
PrintablesHangtight

Snowpeak AP900/ Air Venturi Alpha Cheek Riser

This is a printable version of the standard cheek riser to fit the Snowpeak AP900/ Air Venturi Alpha PCP. The factory hardware is used, so just print in your favourite filament and change up the appearance of your PCP! The model is…

Downloads
409
Likes
21
Rating
5
P

Pointer 9000 - Retro wireless mouse

Step into the future with the Pointer9000! To assemble this marvel of wireless precision and retro design you need bambulab's Wireless Mouse Components Kit . Help me create more FREE models! If you like the stuff I create, consider…

Downloads
409
Likes
225
Rating
4.8
P
PrintablesHangtight

Snowpeak AP900/ Air Venturi Alpha Forend

This is a printable version of the standard AP900/ Air Venturi Alpha forend/ fore grip. The M Lok is functional and the location for the standard magnet to secure the folded stock is included. Additional reinforcement is included that…

Downloads
407
Likes
25
Rating
5
P
Printablesukwebb

Canon Selphy CP900 4 x 6 Postcard Paper Cassette

I recently bought a second hand Canon Selphy CP900 Photo printer, but it came without a paper cassette. Looking on Ebay revealed that if I could find one it would cost more than i paid for the printer! I couldn't find one on Thingiverse ,…

Downloads
392
Likes
16
Rating
5
P
PrintablesIan Kennedy

Chip Clip 9000 Pro Max

The original Chip Clip 9000 was great, and seen as revolutionary by so many people. But what is more revolutionary, than that? I'll tell you what! The Chip Clip 9000 Pro Max, that's what! It's the same exact Chip Clip 9000, but slightly…

Downloads
383
Likes
50
Rating
5
P
PrintablesCarDesignLab

Kawasaki Z900 (2023)

If you want to get this template without subscribing, write me in chat! - SideSilhouette

Downloads
379
Likes
28
Rating
5
P
PrintablesSmelliot

10 Inch Rack Mount for Lenovo Thinkcentre M900 Tiny

Made a mount specific to the M900 version of the Lenovo Thinkcentre's. For some reason, this version of the mini pc had its feet rotated 90° so while existing models would have physically fit the chassis, the feet would have been in the…

Downloads
373
Likes
33
Rating
0
P
PrintablesNate

Mouse Logitech G900 Rear Button Replacement

These buttons, or more accurately button adapters or extenders, can easily fall off during transportation or if dropped (so I've discovered). Rather than buy a new mouse or mouse adapters I grabbed some calipers and got to work in…

Downloads
361
Likes
19
Rating
0
P
PrintablesRobul

Multiboard Wera Kraftform Plus – Serie 900 Big Pack Holder

Holder for Wera Kraftform Plus – Series 900 Big Pack for the Multiboard The holder for Wera Kraftform screwdrivers (900 series) is designed for use with the Multiconnect System by @DavidD for Multiboard. Both holders are intended for the…

Downloads
358
Likes
24
Rating
5
P
PrintablesQuittenkompott
18+

The source marked this model as adult content.

Downloads
355
Likes
186
Rating
5
P
PrintablesTonyG

PocketMesh R2-Mini case for Meshtastic (RAK19003)

**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…

Downloads
350
Likes
58
Rating
3
P
Printablesmt_benno

1992 Honda CBR900rr Fireblade

This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.

Downloads
348
Likes
16
Rating
0
P
PrintablesMoffKalast

BSG The Zephyr 1:9000 Scale

This was initially going to be a remix, but the mesh I was trying to work from was just too problematic so I only ended up using it for proportions and remade everything from reference photos. It's a bit problematic to print so I've split…

Downloads
342
Likes
57
Rating
0
P
PrintablesAlley Cat

RAK 19003 Case for DJI Mini 3 and 4 Pro

UPDATE: Added a top antenna version. Commercial Use and Attribution Notice: Alley Chat DroNode © 2024 by Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling…

Downloads
334
Likes
112
Rating
5
P
PrintablesMediaMan3D

Ryobi 900 Band Saw Mitre gauge

Ryobi 900 Band Saw Mitre gauge. Never had one, so decided to make one. UPDATED 6/10/2017: Increased size of mitre base by 50%. Increased handle size by 50%. Corrected hole sizes for M3 bolts and nuts. I borrowed the angle marks from…

Downloads
333
Likes
64
Rating
5
P
PrintablesBažusLab
Downloads
328
Likes
60
Rating
4.67
P
PrintablesMeshtasticCmoi

Mounting plate RAK Wireless 19007

Mounting plate for a RAK Wireless 19007 base board, using M3 screws

Downloads
326
Likes
26
Rating
5
P
PrintablesSimon D

Wolfbox G900 Pro Rear View Cam Cover

Wanted to mount my rear view camara for my wolf box dashcam on the outside of my car to replace my rear view mirror as it gives me a far better field of view but didn't want to leave it completely exposed, found a few designs but they…

Downloads
321
Likes
12
Rating
0
P
Printablesdenis

RAK19007/RAK5005 case for Meshtastic & N-type antenna mount

Summary This is a case for RAKwireless RAK19007 and RAK5005 base boards with an N-type antenna. My goal was to create a thinner case to accommodate an N-type antenna connector. The current design works but could be improved, for example a…

Downloads
320
Likes
60
Rating
4.5
P
PrintablesGary

Barrel band/restraint XM1, PR900, Stormrider.

Specifically designed for the XM1 but should fit the PR900W and the Stormrider as they are essentially the same rifle. The problem that I was having is one of a wandering zero after transporting the rifle in a soft case. You can, of…

Downloads
315
Likes
10
Rating
0
P
PrintablesSebastian

AC Intake Hose Connector (for Hantech 9000)

Used the original model from Thingiverse (Huge thanks to rafloel this is a great model) and replaced it with the mirrored thread from Chrisfu Quick connect exhaust hose, because this thread fits well with the original hose from the AC (I…

Downloads
302
Likes
29
Rating
0
P
PrintablesDarkextratoasty

RAK19003 Meshtastic Phone Backpack Case

This is a simple case for the rakwireless RAK19003 Mini Base Board to, in combination with the RAK4631 or RAK113100 Core Modules, create a very simple USB connected Meshtastic node. My goal here was to create the most minimalist case I…

Downloads
294
Likes
56
Rating
5
P
PrintablesCrizmotek

RAK 19007 Mounting Plate

This mounting plate allows you to mount a RAK19007 board to an enclosure with the commonly found mesh plate as seen here: https://a.co/d/iQgPNPy . Use M3 or #6 size screws for mounting to the enclosure. For the board itself, the screws…

Downloads
292
Likes
16
Rating
0
P
PrintablesJulio Gesser

Philips Norelco Multigroom Series 9000-21 - MG9510 - Case

Case to perfectly store the Philips Norelco Multigroom Series 9000-21 - MG9510 and all accessories. The Cover must be printed with the top (Philips logo) faced down, I used supports only on the logo. Rods can be printed horizontally, but…

Downloads
271
Likes
46
Rating
4.67
P
Printablesmak77

MAK Lenovo ThinkCentre M900 series Stand

Vertical stand for Lenovo ThinkCentre M900 mini-PC series.

Downloads
267
Likes
20
Rating
5
P
PrintablesJake Judisch

Dewalt Vacuum Hose to Dewalt DWV9000 Universal Connector

I purchased a Dewalt Wet/Dry Vacuum (DXV10S) and was disappointed to find that its hose did not fit to any of my Dewalt hand or stationary power tools including my electric sander (DWE6421) and electric planer (DCP580B) which require a…

Downloads
249
Likes
56
Rating
5
P
PrintablesDarkextratoasty

Weatherproof Meshtastic Enclosure RAK19007/RAK19003 + GPS + 4x 18650 batteries

This is meant to be a stationary node, not a portable handheld device. It features: compartment for up to 4x 18650 lithium-ion cells (long enough to accommodate protected cells) M2.5 mount points for RAK19007 or RAK19003 base board M2…

Downloads
249
Likes
95
Rating
0
P
PrintablesJan Kirchhoff

Sepura / WeTech STP8/9000 Mikrofonhalterung Feuerwehr

Mikrofonhalterungen um das brechen der Kabel wie im Bild wenn das Mikrofon ans Kabel geklemmt wird zu verhindern. Kann einfach mit den normalen Schrauben fixiert werden, wie im Bild zu sehen. Standard ist mit einem 40,5mm Lochabstand, die…

Downloads
248
Likes
22
Rating
4
P
PrintablesEatTheWeek

GPU Holder Max Pro 9000 - 120mm

Printed in PETG-CF and TPU, 0.2mm, 15% infill, support on build plate only.

Downloads
247
Likes
20
Rating
0
P
PrintablesMarecki23

Philips: All-in-one trimmer 9000 series box

Box for trimmer 9000 series, with 15 additional sets,

Downloads
240
Likes
25
Rating
4
P
PrintablesAdafruit

Talking HAL 9000

Build a prop replica of the iconic HAL 9000 interface panel from the movie 2001: A Space Odyssey. Powered by the Adafruit RP2040 PropMaker Feather and CircuitPython, this project uses our enormous red arcade button to trigger audio…

Downloads
237
Likes
109
Rating
0
P
PrintablesD!nu

Frame Caps with Kawasaki Logo for Z900 RS

I designed some caps to cover the holes on the sides of the frame of my Kawasaki Z900 RS. The logo itself is not my design. The caps feature three places to easily remove them, even without tools. They might fit other motorcycles as well,…

Downloads
235
Likes
26
Rating
0
P
PrintablesGanglari

Lid for Nutella Jar (680/900g)

I couldn't find any lids for larger Nutella jars online, so I made this one out of OuterSilent's one I found on Thingiverse by adjusting the size and threads. I wanted a tight fit so I can store kimchi and other liquids in the 680 and…

Downloads
233
Likes
18
Rating
4.6
P
PrintablesAlex Hirsch
Downloads
230
Likes
21
Rating
0
P
PrintablesKrope

Philips Sonicare DiamondClean 9000 Wall Mount for charging station

Wall Mount for the Sonicare DiamondClean 9000 charging station. It's Designed for the Plastic ring, but it also works with the Glass. Printed with the Bambu Lab X1 Carbon in 0.16mm with 0.4 Nozzle. Using Extrudr Greentec Pro Black PLA.…

Downloads
227
Likes
32
Rating
5

RAK 19003 solar enclosure mount

Adapter mount to install RAK Wireless 19003 mini baseboard to enclosure with 5mm grid hole pattern. Also includes adapter for 2000mah flat pack battery and Waveshare solar controller (D version). The onboard solar charging on the RAK…

Downloads
223
Likes
35
Rating
0
P
PrintablesMoto

9003/H4 Bulb Case

A case for storing a 9003/H4 bulb Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 0.1 Infill: Doesn't Matter Filament: Spool3D PLA Category: Automotive

Downloads
219
Likes
17
Rating
4.75
P
PrintablesFrank Black

RAK19007 Wisblock 18650 case

This is a water resistant enclosure for RAK19007 Wisblock. Its powered by a user removable 18650 battery. This case aims on modularity, the core module where the radio is mounted, is removable and can be mounted on different appliances.…

Downloads
218
Likes
57
Rating
0
P
Printableshg1027

Sony WHXB900N Headphone Fix

Clamp to repair headphones that have split between the panel on the headband attached to the cup, and the slider. When you pull these headphones apart to put them on your head, especially if the sliders are slid down very much, it puts a…

Downloads
217
Likes
17
Rating
5
P
PrintablesKarol Koniecki

Saab 900 Saab trunk emblem

Saab 900 Saab trunk emblem

Downloads
216
Likes
18
Rating
5
P
PrintablesOndřej Huf

Western Star 6900 TwinSteer

Use 1.75mm filament as pins. thoroughly clean the edges of the opening. use plastic glue to glue the parts together I look forward to your prints cz: Jako čepy použijte 1,75 mm filament. Důkladně očistěte okraje otvoru. Pro slepení dílů…

Downloads
207
Likes
44
Rating
5