Search results: abox

Sort order

Counting matching models…

P
PrintablesWindy

PRUSABOX Heatbed back cables cover - right side outlet

I have created better back cover of the cables going out of the heatbed used for PRUSA BOX. The original one has unsufficient space inside for the cables to be placed comfortably. My upgrade cover is almost of the same size, but the…

Downloads
970
Likes
88
Rating
4.96
P
Printableswilsondg

PrusaBox Enclosure - Buck Converter box with WAGO holders, RJ45 Network Port, Enlarged Rocker Switch Opening

Note: Please see my remix https://www.prusaprinters.org/prints/155787-prusabox-enclosure-enlarged-buck-converter-box-wit for an enlarged version of this same design to more easily fit all the wires with the relay in the lid. This is a…

Downloads
109
Likes
30
Rating
5
P
PrintablesPosix

PrusaBox adapter hinged for "MMU2S Buffer (inspired by RMU Buffer)"

This is the hinged version of my design PrusaBox adapter for "MMU2S Buffer (inspired by RMU Buffer)" so that you can also open the side door with minimal effort. I kept the original box hinge design language so that it does not appear…

Downloads
104
Likes
19
Rating
5
P
Printablesnozzleshift.com

Bottom magnetic cable duct for PrusaBox by Printer box

The standard cable duct of the PrusaBox has two significant disadvantages. First, the click system can damage the isolation or break cables when squeezed (yes, it did happen to me) and second, it doesn't offer enough space in complex…

Downloads
76
Likes
16
Rating
5
P
PrintablesPosix

PrusaBox adapter for "MMU2S Buffer (inspired by RMU Buffer)"

I also designed a hinged version PrusaBox adapter hinged for "MMU2S Buffer (inspired by RMU Buffer)" so that you can also open the side door with minimal effort. I kept the original box hinge design language so that it does not appear…

Downloads
70
Likes
10
Rating
5
P
PrintablesAnthem212

PrusaBox, PrinterBox, Aktivkohlefilter / CarbonFilter, ActiveCoalFilter, Airfilter, Filter

UPDATE 02.03.2023 Da mir langweilig war habe ich den Luftdurchsatz verbessert indem ich oben noch einen 80mm “Pull”-Lüfter angebracht habe. Die Konstruktion ist etwas komplexer geworden da bei mir auf der Prusabox noch die Filamentboxen…

Downloads
31
Likes
5
Rating
3
P
Printablesnozzleshift.com

Rear Right Bottom Magnetic Cable Duct (short version) for PrusaBox by Printer box

This an additional cable duct for the right side (short version) of the PrusaBox, which I needed, because I have a second raspberry on the outside of the Prusa Box and a lot of cables from my fire suppression system going in. Important!…

Downloads
25
Likes
4
Rating
0
P
Printablesmgen

Microsoft WebCam mount for the PrusaBox

Mount to install Microsoft Live VX2000 or Microsoft LifeCam Cinema in the PrusaBox made by https://www.printer-box.com This mount was created to get the possebility to use “old” Microsoft WebCams togehter with the [Prusa] Box. Needed…

Downloads
5
Likes
0
Rating
0
P
PrintablesCardSlinger

Card Slinger 3.0 - for MTG / ManaBox App - For Sleeved and Unsleeved Cards - Easily scan in bulk quantities of cards by hand

Card Slinger 3.0 for MTG / ManaBox App- Easily scan in bulk quantities of cards by hand - Now for sleeved and un-sleeved cards You MUST print the base and insert in transparent or white filament, it will not work properly otherwise.…

Downloads
63,037
Likes
4,815
Rating
4.66
P
PrintablesMario

Hexabox (modular and interlocking storage system)

This is a remix of "The HIVE" from Thingiverse. I printed out "The HIVE" but the connection was too loose for me. For this reason, I created a new model with 0,2mm tolerance and add different sizes and inserts. Print instructions 0,3 mm…

Downloads
11,989
Likes
7,434
Rating
4.82
P
PrintablesCisco3D

FoldaBox Magic - Print in Place

Once printed work gradually to break free the joints and make the box unfold-able Mini Version included. Print instructions Use Print thin walls feature in PrusaSlicer design for 0.20mm layer height

Downloads
4,383
Likes
809
Rating
4.91
P
PrintablesTHS92

Metabo METABOX bottom holder

Holder for the Metabo METABOX system suitcase, which guarantees that you can safely attach the suitcase to any flat surface. When using a board at least 16 mm thick, it can be combined with the top mount on the Festool (TANOS) systainer…

Downloads
301
Likes
47
Rating
5
P
PrintablesJohnDoe

Arcade stick aBox 1.0.0

Materials Needed: Fasteners: M4 Heatset Inserts: 20× (8mm length) M4 Countersunk Screws: 16× (10mm, for panels) 4× (16mm, for joystick) M4 Screws (flat head): 6× (10mm, 4 - for side panels, 2 - for handle) M4 Nuts: 4× (for joystick) M6…

Downloads
223
Likes
54
Rating
0
P
Printablesscorf

PrusaBox Front Door 270 degree Hinge

This is a direct replacement/redesign of the stock PrusaBox hinge that allows the front door to swing open 270 degrees. I needed the door of my PrusaBox to swing open fully so I redesigned their stock hinge to allow this and made minor…

Downloads
198
Likes
41
Rating
5
P
PrintablesReedTiger

Mirabox N3 and 293S more stable stand + double version

More stable table stand for LCD Box Mirabox N3 (Ajazz AKP03E) and Mirabox 293S (Ajazz AKP153). There is a recess at the bottom for a 120x80x2 mm silicone sheet. Also the angle of inclination has been slightly changed for more convenient…

Downloads
187
Likes
18
Rating
5
P
PrintablesAXIOM Prints

SilicaBox

Silica gel boxes 2 height options 9 mm and 15 mm without lid (Magnet holes 5 mm wide and 2.8 mm high)

Downloads
187
Likes
77
Rating
0
P
PrintablesPrinter Box

MMU2 / MMU3 Autorewind spool holder with Spool tank and Prusabox

This set up is made to use MMU2 or MMU3 on top of an enclosure, using a filament enclosure. With autorewind system made with printed springs, you don't need any buffer ! Features: Compatible with Prusa MMU2 and MMU3 System Auto-rewind…

Downloads
174
Likes
55
Rating
5
P
PrintablesSemperDiscere

Lightweight Hexabox (120mm)

Based on the Original Hexabox, this one takes only 77g of material and 3.5hours per unit vs the nearly 200g and 11 hours of the original. Modified in Fusion 360. Removed the majority of the interlocking surfaces as it is very thick and…

Downloads
170
Likes
32
Rating
5
P
PrintablesMenke3D

parabox - printable parametric box

This is parabox, a rugged, customizable parametric box. You can of course just download the provided example 3mf file, but it's best to download the f360 You can edit the following parameters in the step file: The “ unit ” parameters will…

Downloads
151
Likes
29
Rating
0
P
Printableswilsondg

PrusaBox Enclosure - Adapter Plate to Center Modular Control Panel with Box Temp Addition

This is a 2 part adaptor plate than can be screwed to the modular control panels, and then this adapter plate along with the modular control panel is screwed to the Prusa Box so that the control panel is centered on the front of the Prusa…

Downloads
147
Likes
44
Rating
4.8
P
Printablesm750

a TeaBox "Leaves"

So my sister commented on my TeaBox that she really likes it and would like to use something like that in her own kitchen, she also has a birthday coming soon so…… I modified my original design to better suit her style :) (also can print…

Downloads
122
Likes
48
Rating
5
P
PrintablesFrantisek23

BentoBox High flow dual HEPA filter remix (HepaBox)

I really like the bento box v2 concept. What surprised me is the tiny HEPA filter that reduces the amount of air. I searched and tried the largest filter that would fit in the size of a bento box and I found: HEPA Xiaomi Viomi S9…

Downloads
117
Likes
44
Rating
0
P
PrintablesJB

CannaBox (Haschfass)

.Tja, was soll ich sagen :) Ein kleines Aufbewahrungsgefäß ('Fässchen') für Kräuter aller Art. Gedruckt in PLA, kein Support notwendig. Besonders schön find ich es im Zweifarbdruck. Die 3mf-Datei für den Anycubic Kobra S1 hab ich mal…

Downloads
112
Likes
17
Rating
0
P
Printableswilsondg

PrusaBox Enclosure - Enlarged Buck Converter box with WAGO holders, RJ45 Network Port, Enlarged Rocker Switch Opening

This is an enlarged version of https://www.prusaprinters.org/prints/152385-prusabox-enclosure-buck-converter-box-with-wago-ho. When I put all the wires into the original design with the relay and all the GPIO wires, the box was very…

Downloads
104
Likes
18
Rating
5
P
PrintablesJanos Kehl

PrusaBox – Recycle your empty spool cardboard

Check out the latest variant right here → “ Prusa.Box ” Inspired by the awesome “Mailing Tube Cap” by Repkord, I want to design more boxes to use the empty cardboard parts from prusament spools. Hope you like it. I will do even more…

Downloads
104
Likes
36
Rating
5
P
PrintablesColin

PrusaBox Enclosure 4 Way Relay Holder in Cover Lid of Buck Converter Raspberry Pi

This is simply a modified lid of the buck converter housing in the Prusa Box enclosure, allows a 4 way relay board to slide in. Obviously some board sizes may vary, but most are of a generic size. Hopefully the photo also helps. I use…

Downloads
95
Likes
22
Rating
0
P
PrintablesPatrick G.

Höhenverstellbare Füße PrusaBox

Eigenschaften| Höhenverstellbar| Klemmung| Stellbereich ca. 15mm| Kompatibel mit dem Stahlplattenhalter unterhalb des Gehäuses (https://www.printables.com/de/model/78667-prusa-box-enclosure-expandable-steel-sheet-holder)| Benötigtes…

Downloads
95
Likes
10
Rating
0
P
Printablesm320ng

Stream Dock (Mirabox, etc..) Cover

Stream Dock Cover (Mirabox, FHOOU, etc.) Size: about 130mmx80mm it seems a bit tight~ 30 degree Stand https://www.printables.com/model/1233264-stream-dock-mirabox-etc-35-degree-stand

Downloads
93
Likes
11
Rating
5
P
PrintablesColin

PrusaBox w1219 Temperature Control Housing

Redesign of the modular front for the w1219 temperature controller housing, with switch for Raspberry Pi and longer internal groove for the w1219 circuit board. Orientate with the main face, face down on the bed. No supports needed. Print…

Downloads
92
Likes
13
Rating
5
P
PrintablesGregor Erdmann

Metabox cleat set for new Vacuums

If you have one of the new (2024) Metabo vacuums, you will notice that the attachment method is slightly different from the standard Metaboxes. I have created a cleat set to help you attach a board to the top of your vacuum. Why would I…

Downloads
91
Likes
9
Rating
0
P
PrintablesAfterTen

LED Matrix Frame for 32x64 P4 LED Panel (AdaBox 16)

This is a remix of my frame for the P5 panel. This frame is for a P4 Panel. It's fits the panel sent to Adafruit AdaBox members in box 16. https://www.adafruit.com/product/2278 I really like the look of these LED Matrix Panels. With the…

Downloads
84
Likes
11
Rating
5
P
Printableswilsondg

PrusaBox Enclosure - Horizontal Mount for Logitech C920 Camera

This is a changed design to my original vertical mount for a Logitech C920 which allows mounting the camera without removing the factory mount from the camera. The original mount was vertical which works ok, but it can vibrate a bit when…

Downloads
83
Likes
18
Rating
4.8
P
Printablessandsturm

Teabox

Redesigned the awesome original to support larger tex bags from pukka for example and added "rails" on each side to keep multiple boxes together side by side. Boxes are also stackable. Printing instructions: filament PETG 0,16 mm layer…

Downloads
83
Likes
15
Rating
5
P
PrintablesColin

PWM Control Module for PrusaBox Modular Front

PWM board housing to be used with Prusa Box modular front, allows proportional fan control. Print with buttons face down. You may need to add support to the end with the vent holes - specifically the long 2mm high ridge where the end of…

Downloads
82
Likes
12
Rating
0
P
PrintablesRafaël Abadier

E3D Nozzle holder for PrusaBox

This is a combination of the original PrusaBox scrap bin and the E3D Nozzle holder from Paul_GD. All credits should go to the people who designed the separate files. I only combined them together. PrusaBox: https://www.printer-box.com/…

Downloads
81
Likes
13
Rating
5
P
PrintablesDabomb

Šablona na montaž čiel pre šuflík blum Legrabox pravá strana

Šablona na montaž čiel pre šuflík blum Legrabox pravá strana

Downloads
80
Likes
14
Rating
0
P
PrintablesBrawl Stars

Brawl Stars: Megabox

Mega Boxes are reworked loot boxes in Brawl Stars that contain 10 individual drop rolls . You can obtain them periodically through events, the Brawl Pass, or Daily Wins. Reward Contents Each Mega Box grants exactly 10 different rewards…

Downloads
79
Likes
7
Rating
0
P
Printablesm320ng

Stream Dock (Mirabox, etc..) 35 degree stand

Stream Dock 30 degree Stand (Mirabox, FHOOU, etc.) Size: about 130mmx80mm i just enlarged it to fit the size of the remix Stream Dock (Mirabox, etc..) Cover https://www.printables.com/model/1233256-stream-dock-mirabox-etc-cover

Downloads
75
Likes
12
Rating
0
P
PrintablesRegis

RMU MK3 external mounting for PusaBox

I own a Prusa-Box with a RepBox. After building an RMU MK3, I wanted to mount the buffer on the outside of the case. I didn’t find anything on the Internet, so I did mine.

Downloads
74
Likes
13
Rating
5
P
PrintablesAstupidmoose

mfLinkrail 90 degree Prusabox

Love what Bera had designed, but I didn't love my position for the camera. I wanted as far back as possible to get as much of the build plate as possible, but the orientation of the first clip made that impossible. This remix takes Bera's…

Downloads
74
Likes
9
Rating
5
P
Printablesbaph

Silicabox

Fast printing, created layer by layer to make the perfect design open around 70-80% 360°… with boomer look… New version 2 extendable in remix or follow this link !

Downloads
72
Likes
5
Rating
0
P
PrintablesPosix

PrusaBox Spinning Gyroscope X-axis

Remixed the remixed remix of another remix ;) PrusaBox version, for the enclosure made by printer-box, with negative volume to create little cuts on the outer circle, so that it does not hit the plexiglass of the enclosure. If you have…

Downloads
71
Likes
13
Rating
5
P
PrintablesMorcatko

KraBox - stackable boxes

This is a set of stackable trays and small inner bins that can be customized to any size. You will need basic knowledge of OpenSCAD to get the size you want. The tray size is 150x150x37mm Inner space can be empty, separarated to smaller…

Downloads
70
Likes
16
Rating
0
P
PrintablesGordon

Redbull / Colabox holder for Outlander PHVE

Hi, Cup holder adapter for both Redbull & Coca-cola box. Fits in my Outlander 2016 mod PHVE. Outer Diameter: 79mm hight: 60mm Redbull D: 54mm Coca-cola: 67mm Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: No…

Downloads
67
Likes
10
Rating
0
P
Printablesbaph

Sicabox

This box can be extendable for the infinity and really fast printing.

Downloads
67
Likes
5
Rating
4
P
PrintablesBera

mfLinkrail Prusabox

i made this adapter to mount it on the rail for a raspberry camera https://www.printer-box.com/prusa-enclosure-webcam/

Downloads
64
Likes
10
Rating
5
P
PrintablesANTALIFE

Metabox Alpha N850HJ Stand

Simple stand for Metabox Alpha N850HJ laptop, might work with other Metabox/Clevo models Also there is gluing involved, if printed in PLA then recommend using super glue

Downloads
63
Likes
8
Rating
0
P
PrintablesPb023_3D

Instabox for instax wide photos

Instabox for intax wide photos. Thay con be easily stackable. Added separators to categorize photos easily.

Downloads
63
Likes
12
Rating
0
P
PrintablesUptown Funk

Parabox & (New) Melting Block Puzzle

Summary Here are three similar puzzles with same challenge: pack the blocks inside the box - not that hard, get the job done and see the box is apparently full. Then there's one extra block with a different color, now add this block into…

Downloads
63
Likes
2
Rating
5
P
PrintablesTom

MK4 LCD Front Modular Control Panel for PrusaBox by Printer-Box Remix

When i integrated my new MK4 Printer into the Prusa-Box by Printer-Box i realized, that my xLCD won't fit into the Front of the Modular Control Panel from Printer-Box. The Mounting Holes wouldn't align, the USB Connector had not enough…

Downloads
62
Likes
19
Rating
0
P
Printableswilsondg

PrusaBox Enclosure 4 Way Relay Holder in Cover Lid Modified to be held with two screws

This model is a variation of Collin Hill's lid design to hold a 4 way relay under the lid. When I printed his design, my board was just a bit too wide to fit in the slots, so I modified the design so that on the right side, the relay…

Downloads
61
Likes
13
Rating
0
P
PrintablesSemperDiscere

Shelves for HexaBox, Lightweight or Original

For use as a Shelf on Top, Feet on the bottom, or a Shelf with backstop

Downloads
61
Likes
13
Rating
0
P
Printableswilsondg

PrusaBox Enclosure - Mount for Logitech C920 Camera

This print is designed to allow mounting a Logitech C920 to the PrusaBox rail, without having to take off the mount that comes supplied with the camera. The original mount just slides into a square housing to hold the camera. The housing…

Downloads
60
Likes
14
Rating
0
P
PrintablesTony,H

Insets Hexabox (modular and interlocking storage system)

Printed 0.2 layer hight and no supports

Downloads
60
Likes
14
Rating
0
P
Printablesm750

a TeaBox

I made this design a while back to get the tea cupboard more organized it has served me well for many years already. Fits somewhat tightly on the MK3 bed. The 3mf files included have the settings I used

Downloads
58
Likes
6
Rating
0
P
Printableswilsondg

PrusaBox Enclosure - Enlarged Buck Converter box with WAGO holders, RJ45 Network Port, USB Port for RPI 4 Charging

This is a remix of https://www.printables.com/model/155787-prusabox-enclosure-enlarged-buck-converter-box-wit. The changes made were to add a square hole at the back of the case to allow using an external charger for the Raspberry Pi. I…

Downloads
57
Likes
15
Rating
5
P
Printablesnozzleshift.com

Top Fan Enclosure with HEPA & Carbon-Filter for PrusaBox by PrinterBox

It's a common recommendation leaving the top window (or all doors) open while printing PLA. I don't think that's a good idea. Because PLA also scatters microplastics. Even if it may not be bioreactive, I don't want to have it in my lungs.…

Downloads
56
Likes
26
Rating
0
P
Printablesnozzleshift.com

Corner Cover for PrusaBox by PrinterBox (bottom rear left)

This is a quick and dirty designed cover for the rear left corner of the PrusaBox to hide the cables. It is designed to use with my magnetic cable duct (see here…

Downloads
54
Likes
12
Rating
0
P
PrintablesDerek

Top Mounted Prusabox for Elegoo Neptune3 Pro

The only change to this model compared to the original is the lower part of the box. You can use/print the cap, upper half, and tray from the original design.

Downloads
54
Likes
8
Rating
0
P
PrintablesBouggo

Dispenser-Deckel AnaBox 1x7 Lid Replacemant

English text below ______________________ Bei der praktischen Anabox bricht leicht ein Scharnier ab. Wenn es nur auf einer Seite passiert, hilft noch Tesaband. Sind beide ab, löst sich oft der Deckel und die Pillen fallen heraus. Hier…

Downloads
54
Likes
5
Rating
0
P
Printablesnozzleshift.com

Einsy Dust Grid / Mesh for PrusaBox by PrinterBox

This a replacement for the original ventilation grid to protect the Einsy motherboard from dust. You can install it even if you have the original grid installed to the inside or outside. You don't have to remove the original grid. Because…

Downloads
52
Likes
3
Rating
0
P
PrintablesGreyson W

HexaBox Storage Horizontal Conversion

A bottom stabilizer and top tray for the Hive Storage System

Downloads
50
Likes
11
Rating
5
P
PrintablesGunnski

Improved Hexabox 120mm Insert

Remix of the 120 mm Hexabox Insert-1 to reduce Print Time, Material Usage, and increase Usability whilst retaining overall Strength and Original Style. Print with at least two (2) Perimeters and three tenths of a millimeter (0.3mm) Layer…

Downloads
49
Likes
11
Rating
5
P
Printabless10k

Anabox lid replacement

Anabox pill box is handy, the pills are placed in a separate compartments. There is a compartment for each day of the week. The problem is that when the box falls, a lid can break off. Thats what happened here. This model is a replacement…

Downloads
49
Likes
6
Rating
0
P
Printableswilsondg

PrusaBox Modular Panel Two Switch Coupler Modifed for large rocker switches

This is a modified coupler for the modular control panel. The switch hole mount size is 19mm x 12.6mm to allow for larger rocker style switch. The holes were designed to fit these rocker switches. https://www.amazon.ca/gp/product/B07Y1GDRQG

Downloads
47
Likes
11
Rating
0
P
PrintablesFryedWater

HexaBox half

As i was using the remixed design i found i could not only print 2 since they would constantly fall over and it didn't look nice when i just had them stacked 2 on top of each other. enjoy more customizability without support with support

Downloads
47
Likes
8
Rating
0

Buddy 3D Camera Rail And Corner Mount - For Printer Box's Prusabox

I saw that Prusa had released the Buddy 3D camera and jumped on the opportunity! My current camera was acting up and this seemed like a wonderful solution. I have a Prusabox from Printer Box (wonderful company makes great enclosures) set…

Downloads
46
Likes
6
Rating
0
P
Printablesnozzleshift.com

Cable Cover / Integrated Rail for PrusaBox by PrinterBox

Cable cover with integrated rail and magnets of course. Now you can mount whatever you want and you can change the vertical position in a blink of an eye. Instructions Print with supports ( Important! Take a look at .gcode ). I recommend…

Downloads
46
Likes
9
Rating
4
P
PrintablesAnon

Hexabox insert 1 + base - 170mm

Designed to have an INNER diameter of 170mm to fit Stabilo Pens (and maybe many more).

Downloads
46
Likes
13
Rating
0
P
Printablesnozzleshift.com

Left Magnetic Corner Cover PrusaBox by Printer Box (top-rear-left)

Corner cover (top rear left) to hide the cables going to the LED lights and the fan for the PrusaBox. Before After Print with rim and 15% infill. You should't need support, if you keep your fan blowing a 100% from layer 3 or so. See…

Downloads
45
Likes
11
Rating
5
P
PrintablesMartin

Teabox with Display, thinwalls, easy printable

This is my remix of a Teabox, it is large enough to fit packed teabags up to 67x78mm size

Downloads
45
Likes
3
Rating
0
P
PrintablesJ Design

Silicabox / Desiccantbox

A small box for silica gel up to a minimum diameter of 2mm. The lid has snap fasteners so that it is tightly closed and cannot be opened accidentally. dimensions WxLxH: 50x70x52mm Please let me know if you need other sizes. If you like…

Downloads
45
Likes
5
Rating
0
P
PrintablesTECbot

Filabox Rollers - Cereal Storage Drybox

Combined with the bulkhead I made, (or you can drill a hole for a ptfe push-conect,) these rollers allow you to print directly from the spout of airtight cereal storage containers. 2 skateboard bearings and 2 m8x35 or 1/4inch bolts with…

Downloads
44
Likes
8
Rating
0
P
PrintablesCobrettj

PRUSABOX CONTROL BOARD BOX MMU3

NEW ENCLOSURE FOR MMU3 CONTROL BOARD COMPATIBLE MMU2 FOR PRUSABOX, HIGHER TO CONTAIN THE NEW ADDED BOARD, REDUCER MOTOR CABLE MOVED UPWARDS I ENTIRELY REBUILT THE OLD CONTAINER TO CONTAIN THE ADDITIONAL BOARD AND PUT A PASSAGE FOR THE…

Downloads
44
Likes
8
Rating
1
P
PrintablesPat_S

Remix - PRUSABOX NEW COVER FOR MMU3 CONTROL BOARD COMPATIBLE WITH MMU2

I wanted this nice cover, but with better access to the buttons, hence this remix. If you want more protected buttons, please check out Cobrettj and use this model . Happy printing! If you like the thing leave a like or post a make. I'm…

Downloads
43
Likes
5
Rating
0
P
PrintablesS2021

[Printer-Box] Prusabox Airsystem mit oder ohne HEPA-Carbon - Filter

Druck: Prusa MK4 PETG Düse 0.4 Schicht 0.2 ______________________________________________________________________________________________________ MONTAGE: “Version mit Rolle”…

Downloads
42
Likes
9
Rating
0
P
PrintablesDelukart

HexaBox

I created this box in fusion360 as a gift for a friend and decided to share.. Also available for purchase at https://www.etsy.com/listing/292976475/green-3d-printed-jewelry-box-3d-printed?ref=shop_home_active_16 Print Settings Rafts: No…

Downloads
41
Likes
13
Rating
5
P
PrintablesRobinson

RaspiCam V3 Wide mount case XZ left Prusa i3 MK3S+ or PrusaBox Printer-Box

2024-01-19: Ajout d'une version de la face arrière avec fixation pour le rail des boîtiers de Printer-Box . (absent des photos) Pour la version Wide (grand angle) du RaspiCam V3, je n'ai pas testé avec la version normale (je crois que…

Downloads
41
Likes
4
Rating
0
P
PrintablesFrederic

PRUSABOX guide filament

Modification du guide PTFE pour le filament dans le caisson PRUSA BOX

Downloads
41
Likes
3
Rating
0
P
PrintablesPedro

Silicabox / Silica container for the new Sunlu refill spools

My old silica containers for the Sunlu filamentspools didn't fit anymore because Sunlu now uses different refillable spools (the perforated ones, see picture). The inside diameter now is much smaller (62.7 mm vs ~72.8mm) so I had to…

Downloads
40
Likes
7
Rating
0
P
PrintablesBruceDemski

PrusaBox (V1) Front Channel Covers

After having my PrusaBox for a few days, I realized bits of filament like to get into the channel. They are made for the stock feet on the printer, and are only 1mm thick. When i get some time, I may redesign to make in 2 pieces to go…

Downloads
40
Likes
7
Rating
0
P
PrintablesDaniel Vitanza

Left/Right Door Frame for MK3 Prusabox

1. Introduction As an owner of an MK3 Prusabox, I think that the new design of the MK4 left/right doors is a very good design and upgrade compared to the previous system of locking. It gives a more robust way to close the door and also…

Downloads
40
Likes
7
Rating
5
P
Printablesptrbojko

Lifeinabox medical fridge stand

Lifeinabox medical fridge stand to improve ventilation. Remove silicon inserts from original lifeina legs. Insert there stand. Add silicon inserts to the stand. Second part is the adapter for original lifeina bag.

Downloads
40
Likes
5
Rating
0
P
Printablesxwischi86

StreamDock Mirabox HSV293 Slim Case

This custom-designed case for the Streamdock Mirabox HSV293 Slim offers a sleek and functional alternative to the original housing. The original case’s inconvenient viewing angle made it difficult to see details from a seated position. To…

Downloads
39
Likes
4
Rating
0
P
PrintablesRod_SU

Teabox / Organiser

Summary Teabox/organizer 3x2 2x2 2x1 A box for storing standard-sized tea bags. The second box is suitable for storing/organizing any trinkets. The design is very minimalistic and does not require supports to use as little filament as…

Downloads
39
Likes
5
Rating
0
P
PrintablesPrinter Box

MK4 display on PrusaBox

This model is used to set your Mk4 Prusa display on the PrusaBox, with only two printed parts. Hardware 15x M3x6 screws 15x M3 square nuts Print instructions Print settings: PETG Support : no Brim/raft : no Fill : 20% or more Assembly…

Downloads
38
Likes
10
Rating
5
P
PrintablesJuanfra

PrusaBox Einsy + RPi Zero fan

When you are printing with your PrusaBox is important to maintain cool your einsy and RPi, at the beginning I was using the cooling duct designed by @colin but when I mounted the RPI It was not able to fix in the correct place, so I have…

Downloads
37
Likes
5
Rating
5
P
PrintablesDavid Kolář

Hexabox with simple close

Box, which looks like a hexagon.

Downloads
37
Likes
2
Rating
0
P
PrintablesTHS92

Metabo METABOX 63 XS to Bosch L-BOXX mini reduction

Reduction which create perfect connection with small Metabo METABOX 63 XS and Bosch L-BOXX mini. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.28 Infill: 20 Filament: Aurapol PLA Video…

Downloads
37
Likes
4
Rating
0
P
PrintablesMarcel1801

Aquabox

Aquarium container for plant cuttings with tool holder. Container for plant cuttings with tool holder, custom-fit for Juwel aquariums. Rio 180 Printing with supports

Downloads
36
Likes
7
Rating
0
P
PrintablesRegis

PrusaBox - Squash Ball Feet for Bear Upgrade

We couldn’t fix the downloadable feet on the Printer - Box site on the back of the Bear frame so I modified them so I could mount them. There were 2 screws to fix each foot on the frame, on the new version there is only one screw per…

Downloads
36
Likes
11
Rating
0
P
PrintablesWindy

PRUSABOX multiholder 1 and 2kg spools

The multiholder can be used as 5 spools holder either 5 1kg spools or 1pc 2kg and 4pc of 1kg spools or, can be modified (by printing a few diferent parts) to hold 2 kg spools and 3 5kg spools and yet it still fits the roof of Prusa box…

Downloads
36
Likes
4
Rating
0
P
PrintablesAstroJohn

CBD Box // Tagabox

O.o A small box with its work tray to shape your anti-pain, anti-stress remedies... 200*100*58 without tray 200*100*70 with Fast Printing ________________________________________________________________ Une petite boite avec son plateau…

Downloads
36
Likes
3
Rating
0
P
PrintablesS2021

[Printer-Box] Prusabox Lüfter zu Elektronikbox

Beschreibung gedruckt Prusa MK4 IS PETG Düse 0.4 mm Schicht 0.2 mm STRUCTURAL (weitere Einstellungen nach Bedarf) 1 Bodenplatte 1 Deckel 1 Lüfter 45x45x10 (Sunon ME45101V1-000U-A99) 4 Zylinderkopfschrauben mit Innensechskant M3x8 4…

Downloads
36
Likes
5
Rating
0
P
PrintablesPatricePichery

PiCam PrusaBox MK4

PiCam case, and two arms for top or bottom PiCam Boitier caméra PiCam avec 2 bras de fixation au rail nappe haut ou bas J'ai repris le fichier de PrusaBox du rail et de la fixation. J'ai dessiné deux bras et le boitier pour y mettre la…

Downloads
36
Likes
5
Rating
0
P
PrintablesColin

Prusabox Modular Front Baseplate for 30mm Fan

Redesigned base plate panel to fit 30mm fan for Prusa Box modular front. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 25 Filament: any PETG Category: 3D Printer Accessories

Downloads
36
Likes
7
Rating
0
P
PrintablesMultiPrints

Filament spool holder for BetaBox 3D printer

The Filament spool holder for the BetaBox 3D printer is an essential accessory for any 3D printing enthusiast. It provides a reliable and secure way to store filament spools and prevents them from getting tangled as the filament is fed…

Downloads
35
Likes
5
Rating
0
P
PrintablesColin

Temperature Control Housing for SHT20 - 3D Enclosures - PrusaBox

Temperature Controller Bezel for Temperature Control Unit SHT20 From Ebay See video for more details https://youtu.be/zsTEjOPljjs This is a temp controller from Ebay (UK/US) designed to fit into Prusabox, but can fit into any other 3D…

Downloads
35
Likes
10
Rating
0