65 models
Here is my own interpretation of the razorback form The Expanse. The model is design at 1:30 and mesure around 67 centimeter height but designed to be undersized until 34 % size without issues (1:90 scale - 23 cm height). It can be…
Print approx. €2.21–€2.70 excl. taxPreliminary estimate for one variant
UPDATES: 12/2021 "A" parts for small servo "B" parts for big servo 03/2024 Improvements on the following parts: Body L and R, Case Holders, Gear 1 and Rear Frame R. 05/2024 improved design, ready to print plates, new parts and updated…
Overview: Does not slip, even under decent pulling force Fits poles with a diameter of 6-~16mm Ring for securing the plant has a diameter of ~25mm Uses very little material I needed a clip to secure my tomatoes to a stick, but all the…
The Adaptable Corner Strap Clamp is designed to protect sharp corners while tightening 1-inch / 25 mm straps , preventing damage to your workpiece during clamping or transport. The system consists of: Base – holds and guides the strap 2…
Improved Version Please also check my new improved version: https://www.printables.com/model/1264747-gridfinity-for-usb-power-adapters-euro-plugs Gridfinty for power adapters You can store power adapters (using the Euro-plug ) in a…
Pipette Holders This modular holder was made to be able to resist the seismic conditions of Chile and is an easy-to-use holder for pipettes in general. We have designed multiple versions, all of them available here, to adapt the holder to…
Leicht kürzbar für individuelle Länge. 18mm breit, passend für die meisten Möbel. Farbe nach Wahl der Möbel. Nur 5g Filament, also perfekt für die letzten Meter der Spule. Easy to shorten for individual lengths. 18mm wide, suitable for…
Update 2024-05-25 - [rear-axis - A2212]: Moved the screw hole on the axle by 1.75mm instead of .8mm to have more space between the motor screws and the gear. Update 2024-05-26 - [rear-axis may2024 update - a2212]: The original rear-axis…
Summary: After building a Robak 2 for my nephew using robaki 's Reduction Gears , I was reminded of Duke Dok's chassis and my not-so-great decision to use a 3900KV motor. This gear set is designed to reduce speed to approximately…
Slide in Mount for Ipads for Skadis for Videocalls or Videos
Adaptable tray for telescope, for 1.75 and 2 inch tripods, with different inclinations and optional holders for tablets. (See also: https://www.printables.com/model/1040019-frame-for-models-of-telescope-trays ) After making several models…
This is a configurable riser/top-hat for the SOVOL SV08 printer. In its basic form, it has four corner pieces (labeled) and four vented panels. The panels include an optional slider to open and close the vents. The optional/replacement…
I had some issues with higher power brushless motors stripping out the inside of the pinion gear. Designed this so I could use a standard metal pinion instead of the printed versions of gear_1 and gear_2.…
An organizer to keep my desk tidy. For other purposes you can easily change the outer dimensions in FreeCAD whilst the compartment layout stays relative the same and the thickness of the tray does not change. Photo above shows mine with…
This is a table and cup holder that fits the Ikea Friheten sectional couch and sleeper perfectly. I made this to hold my plates and drinks while sitting on the couch. Printed for some friends and they also loved using it so thought I…
Just a taller pole to accommodate my pipettes!
Modeled this to replace my broken shelf, hopefully it helps someone else. This is a big part so it's split into two parts (each part takes up the full bed on the MK4). I've used NeedItMakeIt's great joint design to join both parts, it's…
NERF SCOPE adattale with every nerf guns/weapons (use solid materials es: pla…. don't use tpu)
I wanted a simple magnetic top lid for my Prusa Core One that held firmly in place and had tabs for easy opening. I found this great model – https://www.printables.com/model/1226383-prusa-core-one-magnetic-top-cover-with-integrated -- but…
It is an adaptable door hive. It is compatible with the Dadant hives 6 frames or 10 frames Dadant hives. The door to hive consists of the first two elements fit together. To extend it to 10 frames, simply print the third piece and add it…
Mým záměrem bylo nainstalovat Ulti Multi MMU3 na CORE One bez toho aby se zásadněji měnily rozměry a nebyla potřeba baterie externích bufferů. toto řešení navazuje na Prusa CORE One UltiMulti MMU3 Hlavní cíle: Významně nezvětšit rozměr…
This is a revision to the stand provided in the original design. I broke it up into parts so it can be printer on the average printer. Everything threads together and I used a ¼-20 threaded rod down the center of the entire print for…
I needed some Nametags for different keys, so I designed this very simple part. You can customize the Text in Solidworks. Watch out not to make the text to small, as I had a few problems where it wouldn´t print the dividers between some…
Having DIY-viaducts for KATO’s Unitrack in n-scale with cable routing below the track, there was still the missing piece – a pier, that can route the cable down to the ground. Here is the solution: a pier/pillar, that is not only able to…
I created these wall-mounted vacuum attachment organizers so that I could change out the attachment mounts to adapt to my needs, and evolve my setup as the sizes and types of attachments change while I further explore woodworking and…
Cuerpo adaptable para fan axial convertirlo en turbina Hay que hacer ajustes en los encastres ya que el axial hay que desarmarlo Funciona con axiales 4020, 4010 Se compone de derecho e izquierdo
Support d'éponge inspiré de modèles existants. J'ai été obligé de le redessiner car le pont entre les 2 bacs était plus large que ce que je trouvais. Le modèle est fourni avec le fichier freecad pour adapter à votre dimension. Le fichier…
Unleash your creativity with this modular, 3D-printable headband system! This design allows you to easily attach and swap various decorative elements, transforming your look in seconds. Whether you're dressing up for a party, adding flair…
Print pieces separately. They slide together once finished. Expandable to however high/big you need. Size: 8x9.5x4 Inch
I liked CoolHandMike's idea for a webcam cover with a little skull on top but wanted it to be more functional. This version alerts the user when the cover is not closed and he might be watched. I added the Fusion 360 source files so you…
Make your own lamp using a fallen branch! Lumitree is an adaptable lamp that clamps into your branch. You can make 2 models: 1 - LED Strip: Printed parts: 3x Branch Coupler(print-in-place) 1x Superior Base 1x Inferior Base 1x Joint A 1x…
Will accommodate a wide range of Multimeter and the compartments can be padded out to suit. The centre storage compartments (Lid and Base) used to store leads and accessories. The compartment divider can be used to store spare batteries…
I like christmas trees. But I didn´t want to kill a tree every year just to look at it for a couple of days. So I designed a reusable christmas tree . Easy to build: You´ll only need a saw and some sandpaper (except of your 3D printer of…
Soporte de móvil antideslizante que gira 360º adaptable a la silla de ruedas
Easily integrate this mount into your Cannondale bicycle's existing mount points, simplifying the attachment process for your GoPro and RAM ball mounts. Effortlessly enhance your biking experience with this seamlessly integrated and…
Update of my previous design of adaptable piers: https://www.printables.com/model/1442162-adaptable-piers-with-cable-routing-for-diy-viaduct Following improvements: Double track piers added and designed in a way it can be mixed with…
Soporte para colgar una matricula en la pared como elemento de decoración. Consiste en un diseño adaptable para la mayoría de matriculas, con una apertura mínima de 10cm, y una máxima de 12,5cm. Se imprime desmontado, pero es muy fácil de…
“Boogles” – Adaptable textured capsules (v2.0) Revisiting an old design does not, in my view, indicate a lack of imagination. In August 2024, I released the “Boogles”, textured capsules (available in two shapes – spherical and tall – and…
Soporte universal rotatorio adaptable Soporte para poner en baldas de 0 a 26 mm de ancho. Distintas configuraciones para poner latas, botellas, base de telefono o una base con agujeros para tornillos M3-M4 y poder acoplar otros elementos…
Cable holder adaptable to various thickness tables
A parametric model to keep your phone safe on round wireless Qi charging pods. This is done for 94 mm diameter charger and a Google Pixel 8 phone. I have my phone in a cover, but should fit without just fine. To adapt use freecad and…
Versatile Reusable Spool for Filament Refills Filament refills are a great idea - re-use the same spool many times and save waste - but it isn't saving the planet if you need to print a new spool each time because refill sizes keep…
poignée adaptable "la trombe"
Deux dupont de chque coté pour faire des branchement adaptable V2
Like Vegar, whose model this is a remix of, I got tired of my phone occupying the cup holder. But it blocked the release catch that allows the console to slide back & forth. So I remixed the original with a gap so that you can access it.…
I am including separate Fusion 360 and step files for each piece so that modifications can be made for your own purposes. There are many ideas and designs available for re-purposing an old ATX power supply unit. I had a few of my own…
Print is for Right side of printer - just mirror in slicer for Left side
Stackable MMU3 Buffer for any Number of Filaments, Adaptable to all Needs. Compatible with Original MMU3 Buffer Cassettes. Ich upgraded my MMU3 to 12 filaments following this project: https://github.com/cjbaar/prusa-mmu-12x After that,…
Gridfinity bookend inspired by the Lihit Lab Firm Book End This design helps hold books upright without falling over or tipping into the void left by a removed book Variations, Height and Depth, can be generated quite easily if the size…
If you want to use these parts, I recommend also printing these other parts that were created by DAL: Adaptable superior anti-wooble: http://www.thingiverse.com/thing:1240175 top guide threaded rod:…
Deux dupont de chque coté pour faire des branchement adaptable V3
Prévoir vis et écrous pour fixer les pièces. Pièce conçue pour s’insérer dans la fente d’un ancien lecteur CD de voiture. Sert de base pour fixer un smartphone Modèle robuste et polyvalent, compatible avec la majorité des lecteurs…
Ever needed a easy to printer organizer for all the little pieces of your 3d printer or prints? Well look no further here is version 0.1 of the best organizer you can print. Stay tuned for potential updates and add-ons. Or not… time will…
Perfect model to print in PLA/PetG, to add to your office, the stamp body has a thread which matches the stamp thread in order for the stamp to be replaced as needed, the CAD file for the stamp is provided feel free to adapt it to your…
I have a bonsai area in the garden with white chippings size 10mm+ that get messy with small leaves and other debris. Normal vacuum nozzles just suck up the stones even if I set the Vax to minimum and open the tube vent, so I had to find…
2025-11-17 Update: Noticed after printing with low-quality filament that the tabs were breaking off. After further analysis identified several systemic flaws in the original model which was from March of 2025. Using new knowledge gained…
Designed originally for a 15mm diameter Autogyre (mechanical air vents with flaps ) Dimensions can be adjusted via user parameters /timeline in Fusion 360 This circular part is designed to securely hold a mosquito mesh over an opening…
Easy to print, put on top of your cymbal and done!
A parametric model to keep your phone safe on round wireless Qi charging pods. This is done for 94 mm diameter charger and a Google Pixel 8 phone. I have my phone in a cover, but should fit without just fine. To adapt use freecad and…
"A" parts for small servo "B" parts for big servo 03/2024 Improvements on the following parts: Body L and R, Case Holders, Gear 1 and Rear Frame R. 05/2024 improved design, ready to print plates, new parts and updated building guide…
If you want to use these parts, I recommend also printing these other parts that were created by DAL: Adaptable superior anti-wooble: http://www.thingiverse.com/thing:1240175 top guide threaded rod:…
El DKS Pro es un chasis radiocontrol con las mismas proporciones que el DKS Basic. Si quieres más rendimiento este es tu chasis. Tracción a las 4 ruedas, distancia entre ejes ajustable, diferenciales en ambos ejes y un rendimiento…
"A" parts for small servo "B" parts for big servo 03/2024 Improvements on the following parts: Body L and R, Case Holders, Gear 1 and Rear Frame R. 05/2024 improved design, ready to print plates, new parts and updated building guide…
The Adaptable Corner Strap Clamp is designed to protect sharp corners while tightening 1-inch / 25 mm straps , preventing damage to your workpiece during clamping or transport. The system consists of: Base – holds and guides the strap 2…
