170 models
A simple remix of boodaah3d's magnetic bed aligner model but chopped down so that the edges of the aligner don't stick up past the build plate. My build plate/heated bed is almost exactly 5.5mm thick, and this model sits just flush with…
Tool for making perfect 90 degree drill holes
Easy Install version Snap-On set of bed sheet aligners. Compatible with factory bracket, Also Strain Relief & Cable Chain Anycubic Cable Drag Chain Anycubic Strain Relief PETG Print with 15% to 20% infill. Left Mount needs support:…
Back Left Mount V3 Now compatible with Cable Drag Chain OEM Strain Relief Installation: 1, Hook the bottom corner under bed of OEM bracket first. 2. Hold the corner you hooked bring it around the bed. 3. Then press down on top of bed…
Back Left Mount v2: includes 2 different options for mounting. (updated 11/29/2023) One with larger holes for M3 heated inserts. One with smaller holes for a through bolt to add a locknut. Can be used with or without a strain relief. Back…
I printed this in Polymaker PLA, at 100% infill. I heated the ends a little bit to make it go on nicer but it works like a charm! If you will be printing with PETG or ABS, I recommend printing it in that material. I printing in PLA since…
A copy of the Invisalign aligners case. Each hole fits two 5x2mm magnets.
Ensure precise alignment for your magnetic build plate with these guides! Never worry about misalignment again. No screws and no need to remove the build plate at all. This 3D print guarantees a perfect slide into position every time,…
This basic tool help checking the axes alignment after a disassembly. Ensure You are printing it on a not skewed printer. How to use: Raise Z axis over 100mm from home Insert the base fork in the Z Axis rod and insert the Z lock then…
Elevate your bead crafting with this duo for standard-sized beads! Showcase Bead Buddy Aligner: Quickly aligns beads with a simple 5 second shake. Saves time during bead prep. Tweezers: Enables precise placement of single beads on your…
1.PRINT IT 2.SNAP IT 3.ROTATE IT 4.PRINT ANYTHING BETTER Stop squeaky noises, mesh bed leveling errors, Z wobble, Z axis errors on the Prusa mini+. No tools needed to install this printer upgrade. It might seem useless for some, but I…
Stop the noise from moving your Z-axis! Printed part that will only need a rotate and snap in place to keep the lead screw aligned in the middle of the Z-bottom hole assigned. It might seem useless for some but I needed it for 1 of my 2…
These guides makes it easier to align a magnetic steel sheet onto an Ender 3 or similar printers. Compared to previous model, this has a tighter fit, and I added more space for the wiring. I made an alternate rear-right model for…
Version 2 is stiffer and works a bit better! If you have Invisalign, Smile Direct, or other aligners, it can be difficult to remove them sometimes -- especially if you have attachments that increase the tension in the aligners and create…
This is a guide for aligning the build plate on the Bambu Lab A1 printer I designed in Fusion 360. I have been having problems getting my build plate perfectly straight on my new A1 printer so I designed this to clip on to the right rear…
This is a build plate aligner for Neptune 4 Plus. Installs in the rear left corner of the bed. Allows attachment of cable chain parts to the bed cable (optional). Uses the original screws. Unscrew and remove the cable retainer plate,…
I was inspired by the " Dental guard box " by KeepTheBOX , however I wanted a few changes so I redesigned one from scratch. Main differences: This one is smaller, has shorter bridges in the hinge, no filet on the underside, thicker…
Orthodontic aligners removal tool - Remover per allineatori ortodontici Now available in an enhanced ergonomic design for greater comfort and ease of use. New & Improved: Redesigned for better grip, smoother edges, and effortless aligner…
Got a CR10/Ender 3 with a Magnetic Steel sheet? Hate aligning it? Me too! This mod screws in above your springs/ spacers, and gives you the best alignment possible for your bed, similar to a Prusa. Can work in conjunction with TH3D Cr10…
A clip-on piece that automatically aligns the bed. Remixed from original to eliminate the need for supports.
Simple alignment clips for helping to hold the board tiles together, in case you have warped tiles. Works for both Frosthaven dungeon tiles and the Frosthaven campaign map as they have the same thickness (2mm) Hex aligner version is…
This has been requested a few times so i decided to post it. It does fit a little loose, but it works. I do not have this printer anymore so I cannot make the adjustments.
I wanted to make a plate stop/aligner for normal ender 3 build plates to be used with the K1. I don't have any ABS atm though, so I can't test it. If anyone wants to beta test it please give me your feed back. To install it you should be…
Used for checking alignment on both sides of X gantry made for the VzBot CoreXY 3D Printer Tension belts on both sides until linear rail lines up with aligner
This aligner removal tool is designed with simplicity and durability in mind, perfect for daily use with all popular brands like Invisalign™, Spark™, and more. Featuring a smooth, no-sharp-edges design, it ensures a comfortable experience…
Easy Install version Snap-On set of bed sheet aligner Just replace the existing cable gland cover Could be compatible with other models of the Ender series To prevent it from defoving with the heat of the bed, I recommend a 80% filling
All in one solution for nozzle brush, flex plate stop/alignment and poop bucket. I designed it primarily for use with TAP where the nozzle is barely able to reach brushes since TAP pushes the nozzle forward. So i positioned the brush…
Update 2024.06.19: Added a variant that can fit several models of accelerometer: BTT S2DW 1.0 (tested) BTT ADXL345 v2.0 (tested) Mellow Fly-ADXL345-USB (untested; should be OK in REV6) GY-291 / SparkFun ADXL345 (SPI) (tested) GY-521…
Printed part that will only need a rotate and snap in place to keep the lead screw aligned in the middle of the Z-bottom hole assigned. It might seem useless for some but I needed it for 1 of my 2 minis and didnt want to disassemble it to…
Designed for 20mm x 20mm box section tube often used for the x-axis gantry beam on corexy printers. Some tubes have relatively wide dimensional tolerances due, for example titanium tube might be 20mm +/- 0.3 mm - so anywhere from 19.7 to…
A little print for sheeta alignement for the LDO Voron 2.4 kit, so the Steelsheet sits perfekt on the bed. Best printed in ASA-CF because of the bed temperature
I really enjoyed Hawwwran design , so I remixed it to add a bit more depth. Also added a new version with a slope so I can align the book with a swipe. Credits Bookshelf aligner by Hawwwran
It always bothered me that you can't align the magnetic print sheet on the magnet very well on the V-core 3. With those small prints you can now. They are simlpy slid on the back edges of the Bed plate and clamp themselves into the unused…
This design is plain, however it can be personalised by adding a name along the front.
This alignment piece will help you achieve the same result time and time again if you have a batch of the same products to laser etch, one after the next. This will allow you to set the origin once, laser the product, set new product in…
Tool for precise drilling of holes and countersinking when drilling 18 mm boards. The drilling guide has the option of a stop when it is 25 mm (1 inch) from the edge. The corner aligner adjusts the boards exactly to the edge. Simplifies…
Just print two of them and that is it.
Remix of the Neptune 4 (Pro) bed plate aligner by @true_2030893 supporting the standard ADXL345 accelerometer.
Simple print that attaches to the top extrusion on the Ender to help with aligning dual z motors
Print Settings Printer: Creality S1 Rafts: No Supports: No Resolution: 0,20 Infill: 100 Filament: ABS, PLA or PETG Category : Tools Made With Blender 4.1
Just a simple PEI sheet aligner for the Anycubic Kobra 2 Plus. The aligners are bolt on to the bed. Remove the bolt on the top right and top left of the bed and take out the buses (be carful with the foam) puss the Buse in hole of the…
This is a super simple, small and quick bed aligner that works with any printer! Just attach some double-sided tape or glue to the bottom and you're good to go! There are liners for the side and corners, so no need to worry about the bed…
to adjust bent skadis panels and align them with others. Para alinear paneles skadis doblados
You can use original screw holes in the bed platform to mount those. I used self tapping screws, after drilling screw holes to 2,5mm (in the printed part). You could also use hole compensation parameter in the slicer (Orcaslicer has it…
You can use all 3, or just the two on the right also work great. There are clip-on versions which don't require disassembling the bed, and also regular through-hole versions. Parametric version The design is parametric, so you can adjust…
A little tool to help align labels and stickers when applying them. Align the sticker against the raised lip, and transfer to the tool. Then transfer on your product. Prints fine without supports, and on fast settings. You can also align…
I have tested this on 3 printers with different colour filament a f3d file is attached if you need to make any changes i printed it with PLA which may warp after a while but wont be too noticable or affect it use
Alineador de carrete (spool) lateral para la ENDER 3 V3 CORE XZ. Ayuda con la mayoría de las marcas de filamentos, a que se mantenga en su posición, y no se deslice y choque con los cables de alimentación del cabezal y la cama térmica.…
Printed part that will only need a rotate and snap in place to keep the lead screw aligned in the middle of the Z-bottom hole assigned. It might seem useless for some but I needed it for 1 of my 2 minis and didnt want to disassemble it to…
Simple model to keep the magnetic sheet and plate aligned. Screw no shorter then M5x12 (min 10 I guess) Threaded insert no longer then 7 mm. Feel free to use the step to modify. Chamfered version also available, probably prints without…
A small hook for Invisalign-like aligners to help you take it out of your teeth. Especially useful if you have short nails :) Category: Bathroom
A tool to help you align the T9 key when replacing a FEP foil on your SL1S resin tank. Other than that, the #1 advise for a painless FEP replacement is: get WERA 05028032001 TX8IP screwdriver. ____________ Printable on both MSLA and FDM.…
Hello! Quite a few printers require two or more belts cut to equal length. With belt lengths of more than two meters the arm length of a normal human being isn't enough to hold both belts on both ends to make sure they are nice and equal.…
Liked the cable drag chain for Kobra 2 Max but couldnt find the snap on bed sheet aligner for the Kobra 2 plus (only options for Kobra 2 neo / pro or remixed files which didn't work). So I decided to design and print my own. On its own it…
Print the main part and 6 “feet”. The feets are a tight fit. Let the print-plate cool down before removing the main part to prevent it from warping.
Hardly needs a description. Very quick printing little guide that helps keep the screwdriver drawer in your toolbox organized. Hole on each end if you want to screw then down in the drawer. If you're like me, your screwdrivers are all…
Orthodontic aligners removal tool - KIDS LINE Key Features: New & Improved: Redesigned for better grip, smoother edges, and effortless aligner removal. For continuous use, it is preferable to use an antibacterial filament. For single-use…
Silicone spacers deform when compressed and sometimes even tend to lean if the support surface is limited by distributing the load force incorrectly. These aligners, having a more rigid and extended base, allow for some improvements: -…
Bed Glass + PEI Aligner for Ender 3 with nozzle cutout, no need to disassembly bed.
Improve your orbital sander's dust extraction by precisely aligning holes in sandpaper sheets. Helps stack discs in a very neat and organized way. Printing Rigid filament, 10%+ infill. Layer height doesn't matter. No supports needed, but…
Goes inside shroud to make the barrel and shroud more solid. V4 is looser on the barrel iirc
This is another take on tap guides or aligners. Instead of aligning the tap this one aligns the tap tool. You need a cross style tap handle with the jaws on the end of the shaft. Also you will have to scale the model to fit your tap…
Spacer to force the screw into the middle of the oval mounting holes, like those found on Ubiquiti appliances. Materials and methods Print list: 4x 19inch-rack-aligner
5/27/26 - Added updated version that moves the brush closer to the bed to gain back a couple mm of bed space
Fasten the aligner with a piece of tape. The base desing is this: TOILET PAPER CLOUD
Pick tool for removing clear dental aligners/braces.
Bookshelf Aligner – Print, Slide, and Straighten! Looking for that perfect shelf presentation? This 3D printable Bookshelf Aligner makes it effortless. Inspired by a viral TikTok trend, it's a simple yet genius tool that glides across…
Bed spacer on back right corner. Print in PETG or ABS ,ASA for higher temp applications. My parameters: layer 0.3 infil 100% Mounting on tesa powerbond (tested can withstand printing without any problem at bed temperature of 110 c and…
Hook for your Invisilign and retainers. Also great as a pick to remove debris from you molars before you put your trays back in. It's easiest to use at the back inside of the tray, this gives the most leverage for removal. It is designed…
Sphere Aligner is a fully 3d printed tabletop game developed for the PrusaPrinters 2021 tabletop and puzzle game competition! The game uses a robust pinball style spring launcher to shoot spheres up though a corkscrew tube, into a stepped…
These are Zenpy's Frosthaven Map Aligners; I just added some little tabs to them to make them easier to print. Each piece has 4 little tabs that will help it to attach to the bed during printing; afterwards, just snip them off and you'll…
Insert the aligner between the rails and push against each other for the perfect fit. Sawing holder for triple rails included too. Thanks in advance for uploading the makes! Print instructions Category: Household
This is a simple Aligner Sleeve to help you setup your Jumbling Tower (Jenga knock-off) game, since the boxed game didn't come with one. This sleeve is designed for 48 blocks, that are each 2.85" x .95" x .55" (72mm x 24mm x 14mm), making…
adds support for nozzle wiper from the Creality K1 series https://www.aliexpress.com/item/1005008253210786.html?
This model is designed to correctly align the BambuLap building plates for the Kobra S1. This model is specially designed for the Funssor heating bed and bed carriage with 8 mm steel spacers in between. Print settingsPrint settings:…
Press fit spacers and alignment tool to make installation easier without pieces falling out.
If you like the models, please like/favorite it! It only takes a second and helps out more than you know. Thanks everyone!
Monolith Ender 3 dual Z-axis aligner inspired by 2001: A Space Odyssey. I couldn't find proper tool to align my Z-Axis after installing dual Z-Axis mod for my somewhat modded Ender 3 Pro. The found solutions didn't quite fit for my use,…
This is a blend of lift pads to be printed with TPU for enough deformation strenght. Designed it for emergency lift (ex: flat tire). They are quick to print and will align the jack's puck at the right place for lifting a tesla. Not…
Keep your dental retainer or aligner safe, clean, and always at hand! This simple yet smart case is designed for everyday use and optimized for 3D printing. ✨ Features No supports needed → fast and hassle-free printing (recommended 0.2 mm…
I had a number of 3/8" plywood shelves which needed to be aligned at the outer edges. I figured a quick clip would do wonders, since the shelves aren't carrying much weight -- just an HO scale train. If you're working with different…
A simple model for easy alignment of the printing plate and at the same time an adjustable brush for brushing the nozzle. BOM: 4x M3 T-nut (to mount to 2020 extrusion) 2x M3 - 8mm screw (Right mount to extrusion) 2x M3 - 12mm screw (Left…
With this simple jig you position the disc correctly so that the suction holes are not obstructed The charger can keep from 4 to 7 discs for a quick change To fix the knob to the body, a simple wood screw is enough I recommend, for the…
8x8 Inch pegboard tile. Each tile has an 8x8 ¼ inch hole matrix with standard US 1 inch spacing. Multiple tiles can be easily positioned to align with the provided aligner tool. Holes for mounting are sized for a US #8 countersink head…
When you have aligned your lasers beampath to perfection, you now need to be sure the beam is 100% vertical to make a straight cut through the material. Here you have a simple tool to make this alignment. -First make sure you hit the…
With my current bow setup, my arrow kept slipping off the factory arrow aligner and falling off the shelf as pulled back. This has higher sides & prevents this issue. I have a Darton bow and this works on the shelf with some strong…
Print nine of these being careful to have the non-chamfered side on the bed. The pocket size is .800 inch (20,3 mm) tall by .730 inch (18,5 mm) wide, which allows a nice snap-fit of the tiles into the printed part for at least 90% of the…
The printers in the Ender3 series have a slightly bad design on the X belt. It might have become a bit better on newer iterations, but according to the images I've seen it's still there. The belt is not aligned with the X movement. This…
Side and front caps for the Prusa XL that cover the holes on the bellows so they don't leak heat through the hex holes. Also aligns the bellow so it doesn't go all over the place. The alignment is defaulted to be the right side sticking…
Monitor Aligner Hinge About: A low-profile, articulated dual-monitor alignment hinge designed to lock adjacent monitors together, preventing bezel sag, uneven angles, and seam gaps in multi-display desk setups. The design accommodates…
My brother wanted to make a 1 inch circle around the hole for his cornhole set. He asked me to design a stencil for that. I made an aligner as well. 1: Put the aligner in the hole 2: Put the stencil over the aligner, they snap into place.…
Looking for a way to use the Prusa printing plates on the Ender 3 S1 Pro, I designed this part. Use ASA or ABS for high temperature suitability. I printed it with 4 perimeters and 15% infill. Use draft shield if you don't have an…
this helps to align and maintain in position the lezyne strip pro rear light when mounted on a 3T with flat seatpost. Print with something flexible that allows you to bend it to install it, PETG is ok. Category: Sport & Outdoors
This is an accessory for the card game "Gloom" published by Atlas Games that keeps status cards aligned on top of the effected character. It keeps effect cards perfectly aligned on top of a character so they are nice and neat plus no…
Neat little jig that holds a self-tapping screw (or drill bit if you like being sketchy) perpendicular to the surface for it to be drilled into, with a tab for some sort of tape to hold it down (the red part), and a retaining clip that…
Use one or more to make replacing your flex plate onto the bed fast and easy.
Best printed without any supports inside the cup which could affect the alignment.
Snaps on and helps align build plate, will work with the nozzle detection
Keeps the coiled cable straight on the desk. New version uses the screws on the aviator cable to mount. Just unscrew both screws a bit, put this underneath and screw it back in. There's enough thread going through the adapter to screw…
