Search results: alps

Sort order

62 models

P
PrintablesInsaneDruid

Commodore 1541 ALPS drive door latch replacement

Additional parts needed 1x 2mm stainless steel rod with 51mm length 1x steel spring 3.8mm diameter, 24mm length Post Printing Remove supports carefully, if the mechanism doesn't slide freely in the metal parts, use a small file to gently…

Downloads
178
Likes
14
Rating
0
P
PrintablesCR3D

4000 summits around Zermatt alps

Mountains around Zermatt with all 4000m indicated (38 of 82 in the alps !). An 1mm hole is integrated in project to place a paper clip with the name File given is with variable height 200um down to 50um, is very long to print. You can…

Downloads
76
Likes
12
Rating
0
P
PrintablesMunich3DThinker

Alps (Elevation model)

Recommended 0,2 mm nozzle 0,12 mm height of each layer For to much stringing use a lighter to remove the fuzzy strings, but be careful Digital elevation data (Attribution) Global ocean terrain GEBCO Compilation Group (2023) GEBCO 2023…

Downloads
41
Likes
2
Rating
0
P
Printableskweg

YALPS - Yet another lab power supply based on DPS3005 and ender 3 24V original power supply

So I didn't want to go ATX they are just 12V and since I've replaced my ender supply for MeanWell I've decided to put the old supply to good use. It's designed to print on face with no supports. There are legs at the bottom to make it…

Downloads
33
Likes
6
Rating
0
P
PrintablesRiskable

Complete Alps stem keycap set optimized for 3D printing (riskeycap profile, multi-material)

This set is identical to my Cherry MX-compatible keycap set (https://www.printables.com/model/397180-complete-cherry-mx-stem-keycap-set-optimized-for-3) but it was generated with Alps stems. Below is a copy-paste of that model's…

Downloads
424
Likes
48
Rating
5
P
Printablestiphedor

ALPS Fader Knob Leever 4x1,2mm - tweaked for 3d printing

Adapted from this model on GrabCAD : https://grabcad.com/library/alps-fader-knob-leever-4x1-2mm-1 Modified to allow for easier 3d printing by removing some useless void space and adding a small tolerance to allow it to actually fit to the…

Downloads
345
Likes
14
Rating
5
P
PrintablesRiskable

Complete Alps stem keycap set optimized for 3D printing (GEM profile, multi-material)

IMPORTANT: PrusaSlicer thinks some of these keycaps used inches. This is incorrect. Tell it “no” if it asks about that (but say “yes” to multi-material). I included screenshots of the correct responses to these pop-up dialogs if you look…

Downloads
319
Likes
59
Rating
0
P
Printableswuspy

Alps switch opener V2

This is a much faster and more effective tool for opening Alps switches than my first attempt . Even very dirty switches, which are quite difficult to open using the toothpick method or my old switch opener, aren't a problem at all.…

Downloads
273
Likes
17
Rating
4.75
P
Printables4sStylZ

Alps AEK (Apple extended keyboard) keycap (number row)

I tried to reproduce the number row keycap from my Apple Extended keyboard for trying to print with PETG, painting keycaps and making some test. There is 2 base fusion 360 models that you can change and learn from and 3 STL variations.…

Downloads
180
Likes
12
Rating
0
P
Printables4sStylZ

ACK60 ANSI Keyboard - Underglow case and Alps plate

Important notice Thoses models cannot be used with a Apple Extended Keyboard ISO version (e.g. The azerty one). All the switchs location are shifted and required both different plate design and case design (Holes aren't compatible with…

Downloads
177
Likes
25
Rating
0
P
PrintablesCrispCy

Alpsteingebirge Säntis Relief

The model was taken from google earth via RenderDoc and due to the generation of the mesh in this process the model needs to be auto-repaired in the prusa slicer.

Downloads
158
Likes
5
Rating
0
P
PrintablesToFe

3D terrain: Alps - near Dachstein

3D model of Dachstein surroundings. The height is 2x multiplied. (The model has a high resolution and can be printed much larger.) Print Settings Printer: Molestock Rafts: No Supports: No Resolution: 0,2 mm layer height Infill: 16%…

Downloads
132
Likes
13
Rating
0
P
PrintablesSteve

Modular Cup Holder for Camping - ALPS Mountaineering Camber Camp Chair

Modular accessory mount for the ALPS Mountaineering Camber Chair. This is a comfortable camp chair but it was missing a much needed cup holder. I designed a mount that attaches to the chair, along with accessories that slide onto the…

Downloads
120
Likes
68
Rating
0
P
PrintablesXeromool

Alps Arcade Joystick

I designed this to use an M6 bolt with a spring. Category: Video Games

Downloads
115
Likes
16
Rating
0
P
Printablesbonnee

Alps/Matias Switch Keychain

Keychain to hold an Alps/Matias keyswitch Print instructions Category: Keychains Summary Keychain to hold an Alps/Matias keyswitch Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2…

Downloads
114
Likes
6
Rating
0
P
Printablesphiliip11

ALPSTUGA air quality sensor tv/monitor mount

Description This simple mount allows your IKEA ALPSTUGA to be placed on a monitor, tv or similar object. Parametric Fusion 360 file is included. Different stls for different monitor thicknesses are included. Printing Instructions Print it…

Downloads
107
Likes
19
Rating
5
P
PrintablesAMOVFC

Toolheads for Heatcore 4 / heatflux / heatcore lite ALPS on Voron V0

update 10/28/26 - big thank TheNexusAvenger for reminding me to update this for more frequent updates please check my website amovfc.com STUPID BURNER ^video So a while ago I added the latest version of my rapid burner, which I am calling…

Downloads
83
Likes
17
Rating
5
P
PrintablesAlex Vikingo

DragonBurner for Alps Heatcore4 Mellow hotend

Dragon Burner remix to fit Alps hotend from Mellow with module. Rest of parts for extruders can find in original place https://github.com/chirpy2605/voron/tree/main/V0/Dragon_Burner no, its will not work with Dragon UHF, its sorter how…

Downloads
82
Likes
10
Rating
0
P
PrintablesElectricCrowbar

My Customized Parametric Cherry MX/Alps Keycap for Mechanical Keyboards

Customized version of https://www.thingiverse.com/thing:468651 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=468651 Instructions Using the following options: key_length = 1.75 key_height = 1…

Downloads
67
Likes
9
Rating
0
P
PrintablesSanderG

Encoder Knob (EC11 Alps)

Looking for a quick and easy way to customize your EC11 Alps encoder knob? Check out these Encoder Knob Model designs, now available on Printables! These designs allow you to create your own unique encoder knob, whether you want to add a…

Downloads
67
Likes
4
Rating
0
P
PrintablesServError

Thrustmaster Warthog Throttle Alps Slew Mod

Thrustmaster Warthog Slew Stick Mod. Models and STLs for use with instructions at https://github.com/ServError/Thrustmaster_Warthog_Throttle_Alps_Slew_Mod

Downloads
65
Likes
6
Rating
0
P
Printablestcp_j

IKEA ALPSTUGA Pro

IKEA ALPSTUGA alternative housing with some nice to have features. This alternative housing introduces wall mounted option, a battery option to keep it operational during outage or to use solar panel for power! It's your call! You are the…

Downloads
64
Likes
31
Rating
0
P
PrintablesNeptune

Alps Opener m2.5 version

Alps switch opener, just squeeze and yank. converted the opener to use an m2.5 nut and screw/bolt to fasten together instead of being print in place as the tolerance required to get a working print was very difficult to achieve. print 2…

Downloads
55
Likes
2
Rating
0
P
Printableswuspy

Alps switch opener

A simple tool to open up Alps and Matias keyboard switches. You'll probably want to print my new switch opener tool instead of this one: https://www.printables.com/model/201337-alps-switch-opener-v2

Downloads
49
Likes
7
Rating
0
P
PrintablesXeromool

Alps Switch Arcade Button

I had a bunch of Alps switches and needed arcade buttons. Category: Video Games

Downloads
47
Likes
4
Rating
0
P
PrintablesGaben

Alps keycap to MX switch adapter

Confirmed good fit with PLA at 0.1mm and 0.2mm resolutions, 100% infill.

Downloads
45
Likes
7
Rating
0
P
Printablesmelka

Alps / Space Invader / MX switch pusher

These are little tools to remove switches from mechanical keyboards plates. The shell goes over the switch bottom housing and pushes on the little retaining clips, the slider goes in the shell to push on the switch and release it from the…

Downloads
44
Likes
9
Rating
0
P
PrintablesIbex

Alps/Alpen - complete mountain range

Complete mountain range of the alps

Downloads
43
Likes
2
Rating
0
P
PrintablesGQinc

ALPS switch keycap - Commodore Logo

Keycap with the Commodore logo on it, for ALPS keyboard switches

Downloads
39
Likes
3
Rating
0
P
Printables4sStylZ

Alps switch lube station

This is a lube station for Alps SKCL/SKCM series Actually this is usable, but maybe to much flexible. Also there is a « test » file to test the fitment before printing the whole part. Considering that this is a file from a previous…

Downloads
38
Likes
5
Rating
0
P
PrintablesAmyRayn

Concrete Mold Alps "Nagelfluhkette"

A mold to create your own alp relief of the Nagelfluhkette.

Downloads
35
Likes
11
Rating
0
P
PrintablesTechnofrikus

Plate Fork for Alps

Here is the version for MX Switches https://www.printables.com/model/135614-plate-fork-cherry-mx

Downloads
33
Likes
2
Rating
0
P
PrintablesNaso4265

Alps Mountaineering dining table replacement mount and spacers

I bought an Alps Mountaineering dining table from a thrift store for cheap, because it was busted. the plastic mounts that hold the table slats to the frame get lost easily, and while you can bend the edges of the slats inward to fix…

Downloads
33
Likes
5
Rating
0
P
PrintablesWesley Maurmair

Ikea Alpstuga Cover

Cover for the Ikea Alpstuga air quality sensor. The display can't be turned of and is too bright for a bedroom

Downloads
29
Likes
6
Rating
5
P
Printablesadamws

Keyboard plate fit test for Cherry MX, Alps or Choc

This is calibration print to determine perfect cutout sizes for 3d printed keyboard plate. Print and test switch fit. Adjustment value can be used when generating final plate. Each plate is 1.5 mm thick. The middle hole uses the starting…

Downloads
23
Likes
4
Rating
0
P
Printablesskrat19

Alps SKCC Pusher

A small device to hold in the clips on the underside of Alps switches to make it easier to get them out of plate. Push the device on to the back of a switch and press a pencil or pen through the hole. Bam!

Downloads
21
Likes
4
Rating
0
P
PrintablesCharles Mangin

ALPS to Cherry MX keyboard stem adapter

Replace missing keys from your ALPS-style Apple II keyboard with commonly available Cherry MX-style keys. Category: Computer

Downloads
19
Likes
0
Rating
0
P
Printablesnasciiboy

TPA6420A Amp Board ALPS Tone Tuning Delux (Box)

Modelo defectuoso pero suficente para placa amplificadora de audifonos acompañada por los componestes disponibles en tienda local de electronica y otros elementos aleatorios a la mano Considerar solo como un modelo base para hacer sus…

Downloads
16
Likes
1
Rating
0
P
PrintablesWil Gaboury

Alps Switch Display Mount

Designed to be printed without supports, flip the 3D model file upside down.

Downloads
16
Likes
2
Rating
0
P
PrintablesDragovich23

Alps Numpad

The USB-C hole needs a bit of sanding

Downloads
12
Likes
2
Rating
0
P
PrintablesLuheadr

IKEA ALPSTUGA Monitor Holder

Small holder to mount your ALPSTUGA on top of your monitor. No glue or hardware needed.

Downloads
12
Likes
0
Rating
0

Apple (ALPS-switched) Standard keyboard MO116 Foot template

This template can be used to recreate the rubber feet on the Standard Apple ADB keyboard MO116. Best fit I found was 0.8mm rubber sheet with a thin double sided tape on one side to attach it to the keyboard after cleaning the old guu off.…

Downloads
11
Likes
0
Rating
0
P
PrintablesOGPattison

ALPSALPINE RKJXU Joystick Support with M2 Screws

Support for the ALPSALPINE RKJXU joystick. It features two holes for mounting the joystick with two M2 screws. I suggest printing with a resin printer, due to the small size and little dents and holes. I attach the full 3D model so you…

Downloads
11
Likes
1
Rating
0
P
Printablesdonutcat

Alps EC40 Encoder Wheel

Simple wheel for the uncommon Alps EC40 encoder, press fit and open top to allow stuff to pass through.

Downloads
10
Likes
2
Rating
0
P
PrintablesSalvatore Crobu

A4T for Mellow Heatcore4 UHF (No ALPS module)

A4T cowl for using Mellow Heacore 4 UHF (No ALPS module) + hotend fan duct Only for Ortbiter 2-2.5 and XOL carraige Use the same print settings as listed in the A4T GitHub Page Need to use the Orbiter 2.5 extruder adapter that is in the…

Downloads
9
Likes
8
Rating
0
P
PrintablesNeptune

Alps Switch plate fork

I printed it in Silk PLA with 0.2mm layer height, 0.4mm nozzle, and 20% infill. I recommend 0.2mm layer height as the model is 2.8mm tall and needs to be that tall.

Downloads
9
Likes
1
Rating
0
P
PrintablesCharles Mangin

Alps Short Stem (Alps SKCC Cream) keyswitch stem

https://deskthority.net/wiki/Alps_SKCC_Cream There are two models - one with the full detail of the original part, and another simplified for easier reproduction. Both should be functionally identical. Category: Replacement Parts

Downloads
8
Likes
1
Rating
0
P
PrintablesTipic_ faker

Mellow ALPS Heatcore 4 fan duct for EVA 2.4.2 / Mercury One.1

NOTE: This model is to be used with the back and bottom plate of this model: Have you used Mellow ALPS heatcore 4 with your EVA 2.4 and Mercury One.1? Then you must know that it is too long and therefore not supported by even the UHF fan…

Downloads
8
Likes
3
Rating
0
P
PrintablesCharles Mangin

Alps Long Stem (Alps SKCC Tall Cream) keyswitch stem

https://deskthority.net/wiki/Alps_SKCC_Tall_Cream There are two models - one with the full detail of the original part, and another simplified for easier reproduction. Both should be functionally identical. Category: Replacement Parts

Downloads
6
Likes
1
Rating
0
P
Printables178222 178222

Goliath or CHC XL + Mellow ALPS StealthBurner + Mellow ALPS

Mellow ALPS: https://aliexpress.ru/item/1005011610938214.html?sku_id=12000057522107054&channel=choice

Downloads
6
Likes
1
Rating
0
P
PrintablesMacGyverr

ALPS Switch Conversion Plate for Atari CX-10

ALPS Switch Conversion Plate for Atari CX-10 Convert your Atari CX-10 joystick into an Alps-switch joystick! Choose between two plates: What’s Included CX10_Alps_High.stl — raises switches for instant clicks , but more sloppy (will press…

Downloads
4
Likes
0
Rating
0
P
PrintablesPetr Pěčka

Queen of Alps

Encoder knob for my MB-6582 groovebox, and more ergonomic replacement for ALPS knobs. Adding FreeCAD and 3mf sources. Go fancy with Flex 93A( green glow effect) and you'll never miss the beat in tha club ;)

Downloads
3
Likes
0
Rating
0
P
PrintablesPetr Pěčka

Princess of Alps

Encoder knob for my MB-6582 groovebox, and more ergonomic replacement for ALPS knobs. Adding FreeCAD and 3mf sources. Go fancy with Flex 93A( green glow effect) and you'll never miss the beat in tha club ;)

Downloads
3
Likes
0
Rating
0
P
PrintablesCharles Mangin

Apple II keyboard - ALPS short stem 12° adapter

Replacement adapter for the "ALPS Short Stem" keyboard switch for the Apple II or II+ See the pictures or this archived Apple documentation for details: https://archive.org/stream/DTCA2DOC-223_repair_IIe_1989#page/n53/mode/1up This is the…

Downloads
3
Likes
0
Rating
0
P
Printablesbergvik

Alps Fidget - May support Cherry

The case and alps plate is tested with pla on a prusa core 1 with 0.2 layer height. Perfect fit, the plate is press fit into the case, and the alps switches fit really well into the 1.1mm plate. I haven't tested the cherry plate yet, as I…

Downloads
2
Likes
0
Rating
0
P
PrintablesPolychrome3D

Napoleon Crossing the Alps - Filament Painting

About the print I adapted David's Napoleon Crossing the Alps as a 200 x 200 mm filament painting, 1.12 mm thick. The reds, browns, skin tones and greys come from thin layers of filament. Nothing is painted on. My print used damp filament.…

Downloads
1
Likes
0
Rating
0
P
PrintablesTheNexusAvenger

Voron 0.2 Rapid Burner + Mellow ALPS + LDO Picobilical + Orbiter v2 Mount

This toolhead board mount is meant for the specific combination of: Voron 0.2 carriage AMOVFC's Rapid Burner toolhead remix for Heatcore 4 ALPS This toolhead mod moves the toolhead upward. I t is not compatible with an unmodified Rapid…

Downloads
1
Likes
2
Rating
0
P
PrintablesMj P

Ikea Alpstuga sensor 3d model

IKEA ALPSTUGA (E2495) CAD Reference Model This is a mostly accurate 3D reference model of the IKEA ALPSTUGA smart air quality sensor. Please note: This file is NOT intended to be 3D printed as a solid object. The purpose of this model is…

Downloads
1
Likes
1
Rating
0
P
Printablesauberginer

IKEA ALPSTUGA air quality sensor housing with bracket

This is a housing for the IKEA alpstuga sensor. the housing is locked securely into place by the rubber feet. You can mount it with 2 screws on the back. Depending on your mounting situation and USB-cable you may need additional spacers…

Downloads
0
Likes
0
Rating
0
P
Printables

Keyboard plate fit test for Cherry MX, Alps or Choc

This is calibration print to determine perfect cutout sizes for 3d printed keyboard plate. Print and test switch fit. Adjustment value can be used when generating final plate. Each plate is 1.5 mm thick. The middle hole uses the starting…

P
Printables

Alps Switch plate fork

I printed it in Silk PLA with 0.2mm layer height, 0.4mm nozzle, and 20% infill. I recommend 0.2mm layer height as the model is 2.8mm tall and needs to be that tall.

P
Printables

Famous Art - Napoleon Crossing the Alps by Jacques-Louis David - 1801

Famous Art - Napoleon Crossing the Alps by Jacques-Louis David - 1801 3D printable model.