Search results: ami

Sort order

8,475 models

P
PrintablesJS-studio

Addams Family Thing

One more Thing from the Addams family Designed for unsupported printing with high detail. Happy HALLOWEEN Print instructions No support needed

Print approx. €1.60–€1.95 excl. taxPreliminary estimate for one variant

Downloads
48,861
Likes
7,286
Rating
4.98
P
PrintablesNat

Spiral Vase Mode Sierpiński Pyramid

Please consider supporting my hobby. You will make my day! Interested in selling prints of this model? Join my Exclusive Print Seller Tier on Patreon for the rights to list and sell prints of this model . Please note that if you are not a…

Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant

Downloads
23,760
Likes
5,431
Rating
4.96
P
PrintablesVC Design

Painter's Pyramid - Stackable

Simple painter pyramids to elevate your workpiece while painting, gluing, or finishing. Designed for stability and minimal contact with the surface, these pyramids help prevent smudges and ensure even drying. Easy to print and stackable…

Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant

Downloads
7,372
Likes
2,678
Rating
4.94
P
PrintablesVC Design

Painter's Pyramid

Simple painter pyramids to elevate your workpiece while painting, gluing, or finishing. Designed for stability and minimal contact with the surface, these pyramids help prevent smudges and ensure even drying. Easy to print and stackable…

Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant

Downloads
5,086
Likes
2,091
Rating
4.87
P
PrintablesB3D_Printing

Gaming Controller Stand

I had a friend ask me to design a small controller stand, and this was my result! The design works great with all the controllers I have personally, including; Xbox One Playstation 4 Playstation 5 Very easy to print on its side, although…

Print approx. €5.95–€7.28 excl. taxPreliminary estimate for one variant

Downloads
3,847
Likes
367
Rating
4.86
P
PrintablesBlue Hazel

Perimeter Origami Lampshade

Lampshade with holder for E14 lamp socket. Printing: The lampshade was printed with one perimeter (per layer) only, but not in vase mode. The two test versions of lampshade holder were printed in vase mode. For E14 socket a negative…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant

Downloads
2,114
Likes
832
Rating
4.86
P
PrintablesKamil Horák

5cm Mini Origami Elephant

If you like the model, give it a ❤ and download it, thanks- Pokud se vám model líbí, dejte mu ❤ a stáhněte si ho, díky For better results, I recommend adding supports

Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant

Downloads
1,748
Likes
429
Rating
5
P
PrintablesPeter Farell

Anya from Spy Family

Anya Forger From Spy Family. Anya2.3mf and .obj are both updated with thicker dress and (hopefully) no holes. I will leave the old ones up for a bit. Please use Anya2 models.

Print approx. €15.67–€19.15 excl. taxPreliminary estimate for one variant

Downloads
1,710
Likes
255
Rating
5
P
Printables_Building_Arts_

The great Pyramid of Gyza

What we know about Egypt's ancient civilization comes from what was left behind. Archaeologists scour the region for remnants to piece together pictures of the past, but some clues are hard to miss: at six and a half million ton, taller…

Print approx. €10.06–€12.30 excl. taxPreliminary estimate for one variant

Downloads
1,400
Likes
158
Rating
5
P
PrintablesCalebTimoteo

Ceramic Vase - H&M Home (Decoration)

Any feedback would be greatly appreciated . Product page here: https://www2.hm.com/en_us/productpage.0812790001.html Nozzle: 0.4-1.0mm Layer: 0.2-0.8 (Recommended) No Supports needed Scale it as you like :)

Print approx. €10.53–€12.87 excl. taxPreliminary estimate for one variant

Downloads
1,388
Likes
499
Rating
5
P
Printablesateldsign

Pyramidal paint supports

These are simple paint supports. Three versions, with different rounding. On wood boards, depending on the weight of the piece you paint, the pointier ones may leave a mark, hence the more rounded ones. I recommend the 3mm rounded ones.…

Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant

Downloads
1,340
Likes
245
Rating
4.81
P
PrintablesFloatingCam

Oversized Armchair for Sylvania Family and Calico Critters

Resized to fit the Sylvania family bunnies this sofa chair prints well, looks soft, and adds a ‘lived in’ look.

Print approx. €2.09–€2.56 excl. taxPreliminary estimate for one variant

Downloads
1,337
Likes
244
Rating
4.89
P
PrintablesArt3Design

Maya Pyramid

Maya Pyramid Dimension below

Print approx. €9.26–€11.31 excl. taxPreliminary estimate for one variant

Downloads
1,336
Likes
88
Rating
5
P
Printablessmysnk

Laminar Flow Garden Hose Head (mk2)

Read: How I Designed a 3D-Printed Laminar Flow Nozzle (2026-08-21) Versions mk1 - 2020-08-31 mk2 - 2025-06-04 mk3 - 2025-06-06 Intro Like so many late-night YouTube voyagers, I was hypnotized by those crystal-clear “glass rods” of water…

Print approx. €5.91–€7.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,286
Likes
417
Rating
5
P
PrintablesEcoDad

Pentagonal Impossible Pyramid Passthrough Fidget

Printing Instructions/Recommendations 50% gryoid infill provides weight and strength so it can move through with just gravity 0.2mm layer height PLA for good finish Offset is around 0.2mm between objects - will not scale down well Print…

Print approx. €4.58–€5.60 excl. taxPreliminary estimate for one variant

Downloads
1,270
Likes
65
Rating
0
P
Printablesrcmz

Addams Family Thing Hand Wireframe

Inspired by https://www.printables.com/model/196949-spider-man-web-only-lets-retract No support needed !

Print approx. €12.07–€14.76 excl. taxPreliminary estimate for one variant

Downloads
1,239
Likes
180
Rating
5
P
PrintablesSASSy Design

Tradicional chinese Origami flower Pot and Planter for your plants

A very nice and traficional pot or planter for your plants. Easy to print in 2 or 3 layered vase mode settings. Prefered print material - PLA Happy printing!

Print approx. €1.87–€2.29 excl. taxPreliminary estimate for one variant

Downloads
1,192
Likes
325
Rating
4.94
P
PrintablesHeidi Makes

Totoro Family (finger toys)

We are obsessed with Totoro over here, so after watching the movie a 4th time just this weekend, I had to give this a try. Designed on Nomad Sculpt, the models print well without supports both in mono and multi color. Check also my other…

Print approx. €6.54–€7.99 excl. taxPreliminary estimate for one variant

Downloads
1,119
Likes
288
Rating
5
P
PrintablesPeter Farell

Screaming Goat

Screaming Goat Disturbing.

Print approx. €10.16–€12.41 excl. taxPreliminary estimate for one variant

Downloads
1,091
Likes
143
Rating
5
P
PrintablesMultisystem

MiSTer Multisystem V5 2022 classic gaming console 3D Printed enclosure design

This is the 2022 version 5 of the MiSTer Multisystem enclosure. For printing the enclosure, please read the included PDF - how to print guide. Multisystem is brought to you by Heber ltd and RMC Retro. If you have any technical questions…

Print approx. €2.20–€2.69 excl. taxPreliminary estimate for one variant

Downloads
1,033
Likes
64
Rating
5
P
PrintablesDaniel Ryan

Large Pyramid Challenge Coin Holder

A larger pyramid style challenge coin holder designed to display 10 coins of 40mm diameter displayed in 45mm diameter cases. Want a smaller version? Check out my smaller 6 coin pyramid holder here ! Prints great in PLA at 0.2mm with…

Print approx. €8.66–€10.58 excl. taxPreliminary estimate for one variant

Downloads
939
Likes
84
Rating
5
P
PrintablesMechatronist

Xebec Sailing Ship Gaming Miniature Compatible with DnD Spelljammer

A model of a Xebec sailing ship. This miniature is well suited for tabletop games such as Dungeons and Dragons. It comes with a version on a flying stand as well as a version with its bottom cut off to make it look like it's floating in…

Print approx. €0.74–€0.90 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
869
Likes
201
Rating
5
P
PrintablesTnF

BattleSTAR - The first and last 'GAMING' headset stand you'll ever need!

< Beep bada beep AI is loading... > Is it a top secret stealth aircraft? Or is it a gate to another dimension? No! It's the next big thing since sliced bread! Inspired by hardcore gamers all around the world.... With edges so edgy it will…

Print approx. €5.28–€6.45 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
850
Likes
97
Rating
5
P
PrintablesRoiku

pyramide de Sierpinski

Modèle de la pyramide de Sierpinski, modélisé par moi-même. Model of the Sierpinski pyramid, modeled by myself. Instagram: @roiku3d

Print approx. €12.70–€15.52 excl. taxPreliminary estimate for one variant

Downloads
803
Likes
64
Rating
5
P
Printablesdjedje_zr7

Familly Toothbrush Holders (F3D include)

Just glue the front and the body.

Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
743
Likes
238
Rating
5
P
PrintablesDonronchi

Origami Umbrella

This is my own printed version of the open origami umbrella. It can also be a fidget toy to play on your desk and a perfect test for a great first layer of your printer!!! Print instructions and Settings I include .stl , .3mf and .gcode…

Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant

Downloads
740
Likes
133
Rating
4.86
P

Pyramid

Made in student version of Autodesk so quoting: “May not be used for commercial, professional, or any other for-profit purposes.” Only educational or research purposes so you can give me some feedback on what i did wrong etc. It takes a…

Print approx. €11.73–€14.33 excl. taxPreliminary estimate for one variant

Downloads
682
Likes
29
Rating
5
P
PrintablesSASSy Design

Modern origami Christmas tree - Home decor - Winter ornament decoration - Vase mode

The 2025 Christmas Tree is out! Please let us know what you think of this year's version! And to all of you… Happy Holidays and an Amazing New Year! Used Filament: This model was printed using ROSA 3D PLA-Silk Emerald Green & Gold The…

Print approx. €2.75–€3.36 excl. taxPreliminary estimate for one variant

Downloads
671
Likes
198
Rating
5
P
PrintablesAllpa

Christmas Fireplace (illuminated) // Weihnachts-Kamin (beleuchtet)

Winter, and Christmas in particular, is a time for coziness and tranquility, and nothing achieves this better than lights and lighting. With this atmospheric and festively decorated fireplace on the shelf or windowsill, the Christmas…

Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant

Downloads
663
Likes
257
Rating
5
P
PrintablesNadav Halwany

Dynamic Range MIDI Foot Pedal

About I was looking to buy a MIDI pedal with a good range of motion and a fairly low price (mainly to control virtual instrument's expression/volume while my hands are on the keyboard, and my right leg is on a sustain pedal). I didn't…

Print approx. €6.03–€7.37 excl. taxPreliminary estimate for one variant

Downloads
623
Likes
302
Rating
5
P
PrintablesLayo3d

Origami Christmas Ornaments

A set of three christmas ornaments, inspired by origami shapes. Ribbon Deer Pidgeon Print settings 0.2 layer height 2 shells 15-20% infill 5 top / 4 bottom layers no supports no raft

Print approx. €0.52–€0.64 excl. taxPreliminary estimate for one variant

Downloads
598
Likes
144
Rating
4.67
P
Printablesfifindr

Impossible Pyramid Fidget

Showcasing the magic of 3D printing, the Impossible Pyramid Fidget features a perfectly captured sphere inside a geometric pyramid. This intriguing design is available in both monochrome and dual-color versions, adding an extra layer of…

Print approx. €0.80–€0.97 excl. taxPreliminary estimate for one variant

Downloads
465
Likes
48
Rating
5
P
PrintablesMultisystem

MiSTer Multisystem V6x 2023 classic gaming console 3D Printed enclosure design

Update to the Multisystem FPGA console enclosure for 2023 - easier for print farm production, quicker using 0.6mm nozzles (recommended) the design is tuned for 0.6mm E3D V6 nozzles on a Prusa i3 MK3/3+/3S+ machine. For construction and…

Print approx. €5.64–€6.90 excl. taxPreliminary estimate for one variant

Downloads
418
Likes
36
Rating
5
P
PrintablesApex23

Skadis Tamiya 250ml Thinner and Airbrush Cleaner containers rack

This Skadis rack can hold 2x a 250ml Tamiya X-20a, airbrush cleaner or lacquer thinner container. Inner dimensions are 55mm x 72.5 mm The design was inspired by the Skadis Tamiya Cement etc holder of SoBaldrick…

Print approx. €4.64–€5.67 excl. taxPreliminary estimate for one variant

Downloads
402
Likes
60
Rating
5
P
PrintablesoXiVanisher

Miniature War- and Skirmish gaming Objective Marker

Miniature War- and Skirmish gaming Objective Marker for 40 mm Markers with a 1, 2 and 3 inch distance display. Printed with only two layers makes it strong and flexible. There is also a Miniature War- and Skirmish gaming Control Range…

Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant

Downloads
391
Likes
47
Rating
5
P
PrintablesPiJey

Takamine TK4NT Acoustic Guitar Preamp Replacement Housing

Motivation The frame of the housing of a Takamine TK4NT acoustic guitar preamp broke, so that the preamp was no longer fixed in the guitar. I designed a replacement housing. Printing I printed the design on a i3 MK3 using PETG, layer…

Print approx. €5.02–€6.13 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
385
Likes
10
Rating
5
P
PrintablesOurAngryBadger

100mm Dynamic Fan Test Tower

So you want to know what fan speed is best? You can test optimal print fan speed with this tower. You MUST use newest PrusaSlicer and use the fan speed settings in the photo, slice at 0.2mm layer height. I recommend using a large brim…

Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant

Downloads
385
Likes
34
Rating
5
P
PrintablesFilip Soukup

Ramses II (Der Zerstreute Pharao) pyramid

Do you need a spare pyramid for board game Ramses II? You come to the right place. It fits nicely and even can be stuck on top of original pyramids.

Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant

Downloads
379
Likes
13
Rating
5
P
PrintablesBatbx

Pyramidal 6 hockey puck stand

Designed to hold my 6 ice hockey team pucks. Print base only for a 3 puck stand. Add 3 insert for 6 puck pyramidal shape stand. I played with print settings for insert to show infill.

Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant

Downloads
379
Likes
48
Rating
5
P
PrintablesTantalus

Amiga 500 Mini (A500 Mini) - Miniature Full Size Floppy Disk

No Amiga A500 was complete without a load of floppy disks scattered over the top ready to play. Therefor I designed a full-scale miniature floppy disk for the A500 Mini along with coloured blank disk labels. The Model is split up into two…

Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant

Downloads
368
Likes
71
Rating
5
P
Printablesdirrgang

Beyerdynamic Slider Repair Kit

Slider repair kit Fits: DT 790 / DT 797 DT 770 / DT 770 PRO / DT 770 PRO HT DT 880 / DT 880 PRO / DT 880 PRO HT DT 990 / DT 990 PRO HS 200 Dyn / HS 200 Rotor / HS 200 Trend HS 400 MMX 300 UPDATE - 30.10.2022: Some slight fine-tuning.…

Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant

Downloads
353
Likes
18
Rating
5
P
PrintablesFloatingCam

Table and Chairs for Sylvania Family Critters

A table with chairs for ‘critters’ with tails. Our dollhouse is inhabited by Sylvania Family-sized bunnies and this set was built for them. Around a 1:16 scale, the chairs print with minimal supports. The design allows the critters to sit…

Print approx. €2.12–€2.59 excl. taxPreliminary estimate for one variant

Downloads
335
Likes
75
Rating
5
P
PrintablesSurfalex2000

Prusa XL series: Linear (Pressure) Advance Calibration Pyramid

ERROR in V2 Code ! Sorry! This was fixed in V3 In a recent post, Prusa introduced the K Values in the G-code of the Filament Settings, and since i had trouble with Multicolored print having a nice bond between the edges of the colors, i…

Print approx. €7.68–€9.39 excl. taxPreliminary estimate for one variant

Downloads
304
Likes
63
Rating
3
P
PrintablesPeter Farell

Addams Family Munster Coach : Crash Derby Cars

Addams Family Munster Coach : Crash Derby Cars All versions have an extra version of just the car included. Remove if not needed.

Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant

Downloads
277
Likes
106
Rating
3
P
PrintablesApex23

Ikea Skadis holder for Tamiya Masking Tape dispensers

Organize 18,10 and 6 mm Tamiya Masking tape dispensers on your Ikea Skadis board. See also my other designs for more ways to Organize your Tamiya tools on the Skadis board.

Print approx. €5.00–€6.11 excl. taxPreliminary estimate for one variant

Downloads
276
Likes
34
Rating
5
P
PrintablesRicardocab

Tamiya Weathering Master Set

A station that holds a complete set of Tamiya weathering Masters, four bottles of Tamiya panel accent and some brushes

Print approx. €18.17–€22.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
273
Likes
58
Rating
5
P
Printablesthe_buff

Dynamite

This is a stick of dynamite (32mmx200mm) and a band for making a three-stick bundle. Printing: The dynamite consists of two pieces, the Stick and the Plug. The Plug holds the fuse. Both were printed without supports. The Wrap is a…

Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
269
Likes
29
Rating
5
P
PrintablesDad2Earthlings

Qbert and pyramid

I watched Wreck-It Ralph and decided I needed something Qbert! This could be corner mounted, straight wall-mounted with bracket, or just a desk piece. I'm not quite sure which way I'm displaying it yet I printed with tricolor filament to…

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant

Downloads
263
Likes
17
Rating
5
P
Printablesplabs.cz

AngleArt Alphabet: Dynamic 3D Messages

Introducing a 3D print model that reimagines the art of typography, providing an innovative way to communicate messages. Our distinct letters, printed at angles, offer a captivating and creative approach to presenting text that you can…

Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant

Downloads
260
Likes
93
Rating
5
P
PrintablesTMTYL

Tamiya Weathering Kit Organizer

Organizer holds: 4x Tamiya Weathering Masters 2x Bottles of Tamiya Panel Liner 1x Tamiya Paint Thinner 4x Brushes Cotton Swabs Print instructions: Printed with PolyTerra PLA mint color, 0.25mm, 5% infill, no brim, no supports Inspired by…

Print approx. €6.83–€8.34 excl. taxPreliminary estimate for one variant

Downloads
255
Likes
77
Rating
5
P
PrintablesMarkus

First aid kit door holder for Opel Rocks-E/Citroen Ami

A pocket/holder to mount in the door of an Opel Rocks-E (or probably Citroen Ami) that can hold a small first aid kit (e.g. the one required by German law). As it is, the holder fits in the rear corner of the right side door (or the front…

Print approx. €12.56–€15.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
250
Likes
14
Rating
0
P
PrintablesFlyingT

O11 Dynamic HDD Fan Shroud

I wrote an article with testing results about this: https://www.igorslab.de/en/o11d-hdd-cooler-2 This is a Remix of Thingi 4923606, but made to fit the regular O11 Dynamic and not the XL Version. Two 60x25mm fans fit inside, I suggest…

Print approx. €5.55–€6.79 excl. taxPreliminary estimate for one variant

Downloads
249
Likes
33
Rating
0
P
PrintablesTommy Zero

Temp tower for interlaminar strength test

Filament length Less than 2.5m Filament weight Less than 6.5g You can easily test the strength of the filament with leftover filament.The model has a cutout for easy breakage, so you can feel it break at the center of the letter. 260~235℃…

Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
237
Likes
17
Rating
5
P
PrintablesCatja

German WW2 Decontamination Box With Label

A few of these small black or brown bakelite containers was something every German soldier would be issued and required to carry in a uniform breast pocket. Each box contained 10 tablets of Losantin - calcium hypochlorite - which when…

Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant

Downloads
216
Likes
19
Rating
0
P
PrintablesMultisystem

MiSTer Multisystem2 Analogue FPGA based retrogaming console enclosure

This is the MiSTer Multisystem2 Analogue enclosure. For printing the enclosure sections, please see images, they do not require any support material to be enabled, everything is orientated to print without support. Please read the…

Print approx. €3.70–€4.52 excl. taxPreliminary estimate for one variant

Downloads
211
Likes
18
Rating
4
P
Printableskth0

Origami Folding Car w/ Suspension

Print easily in one flat sheet, and then fold into a pint-sized racer! No Supports Utilize a filament swap ~layer 20 for custom seat/engine color Compliant Mechanism suspension Instructions Fold the green lines slightly up. To do this…

Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant

Downloads
205
Likes
70
Rating
5
P
PrintablesPeter Farell

Hipster Holy Family Nativity Scene

Hipster Holy Family Nativity Scene Meshy.ai : Combo of 3 models. Basic post sculpting fixes.

Print approx. €5.86–€7.16 excl. taxPreliminary estimate for one variant

Downloads
199
Likes
38
Rating
5
P
PrintablesBooks

Straw Square Pyramid Connector

A connector to make a square equilateral pyramid out of straws. Uses the white part of the straw from boxed milk.

Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant

Downloads
197
Likes
24
Rating
0
P
PrintablesAXM61

University of Miami logo AXM

Here is a multicolor 3d printing technique using one extruder without an AMS on an Ender-3 printer using PrusaSlicer. I'm including the 3mf file along with the STEP and GCODE file as well. Although this is done automatically by having an…

Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant

Downloads
186
Likes
6
Rating
0
P
PrintablesBooks

Square Equilateral Pyramid

A square-based pyramid where all of the edges are the same length.

Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant

Downloads
185
Likes
8
Rating
5
P
PrintablesAlexa3D

Spiegelhalter | Mirrorholder Opel Rocks E Fiat Topolino Citroen Ami

Ich vbrauchte für unseren Opel Rocks E einen Innenspiegel. Diesen habe ich bei Amazon gefunden. Der originale Halter des Spiegels sagte mir nicht so zu, da man ihn hätte Schrauben oder Kleben müssen. Also einen neuen konstruiert. Infill:…

Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant

Downloads
170
Likes
9
Rating
0
P
PrintablesAinon3Dtisk

Hippo family

Good morning, Welcome to my profile, full of models and miniatures :-) I have a Hippo Family for you for the zoo, diorama, or just for play. Very nice characters. It is suitable for coloring. My children absolutely love it :-). Important:…

Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant

Downloads
170
Likes
32
Rating
0
P
PrintablesDerek

Super Nintendo PAL / Super Famicom cartridge tray

I wanted to be able to have a quick look at my games and be able to browse through them without taking them out of their rack. On this model, there is a bit of space between cartridges, and they are oriented at a 15° angle. When looking…

Print approx. €8.70–€10.63 excl. taxPreliminary estimate for one variant

Downloads
169
Likes
29
Rating
5
P
PrintablesDom Lamberti

Castlevania Belmont family crest

After watching Castlevania Nocturne, and then rewatching the first 4 seasons of the magnificence that is Netflix's Castlevania, I went to print off a belmont family plaque to have on my wall, only to find there really weren't any? which…

Print approx. €1.72–€2.10 excl. taxPreliminary estimate for one variant

Downloads
169
Likes
17
Rating
0
P
PrintablesRicardocab

Tamiya Hobby Weathering Station Organizer V2

A station and organizer that holds a complete set of Tamiya weathering Masters, four bottles of Tamiya panel accent, six brushes and a ink pen. Included are .stl, .3mf and two print files, one in PLA and other in PETG. Enjoy organizing.

Print approx. €20.32–€24.83 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
159
Likes
36
Rating
5
P
PrintablesoXiVanisher

Miniature War- and Skirmish gaming Control Range Marker

Miniature War- and Skirmish gaming Control Range Marker for 40 mm Markers with a one inch distance display. Printed with only two layers makes it strong and flexible. There is also a Miniature War- and Skirmish gaming 2024 Objective…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant

Downloads
152
Likes
18
Rating
5
P
Printablesdjedje_zr7

Puzzle #2 the pyramid

Puzzle for all

Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant

Downloads
151
Likes
17
Rating
4.67
P

Five star rim with hub cover 1:10 Tamiya ex12 mm offset 4mm+ rc car

I designed five star rim for a Tamiya rc car compatible 1:10 model, 52mm diameter, 26mm width, 4mm hole and 4mm positive offset. There is also the hubcap and the tool to screw it to the rim. Print with a layer of 0.15 otherwise the tool…

Print approx. €2.66–€3.25 excl. taxPreliminary estimate for one variant

Downloads
147
Likes
45
Rating
5
P
Printablesmstejska

Flowerpot with pyramidal patern

Flowerpot with pyramidal patern internal dimensions: diameter bottom 80mm diameter top 100mm height 75mm

Print approx. €5.34–€6.53 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
144
Likes
22
Rating
5
P
PrintablesoXiVanisher

Tamiya Square Bottle Stand (extra thin cement or panel liner)

This is a simple stand for up to two Tamiya square bottles like the extra thin cement or panel liner. After spilling my bottle twice and ruining the pretty grid on my cutting mat, I designed this. 😅

Print approx. €1.99–€2.44 excl. taxPreliminary estimate for one variant

Downloads
135
Likes
17
Rating
5
P
PrintablesDieguito

3d Map Sagrada Familia (Barcelona) Spain

3d map of the Sagrada Familia and its environs In a 3d map with the reliefs of the city and the surroundings of the monument (it is a similar representation by copyright).

Print approx. €11.00–€13.45 excl. taxPreliminary estimate for one variant

Downloads
132
Likes
13
Rating
0
P
Printablesneon.blue

Extended 12mm RC Hub for Tamiya, etc.

This is a standard 12mm hex that is 2.2mm wider than a standard hex, with slightly more depth for the pin. I've printed this in both PLA and PETG. With PETG the fit can be tight due to the stringing, so a little bit of post processing…

Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant

Downloads
131
Likes
27
Rating
5

RGBtoHDMI adapter housing for Amiga 600

This is the Amiga 600 version of my RGBtoHDMI adapter Amiga 500 Version. For assembly instruction look at the Amiga 500 version. https://www.printables.com/model/63688-rgbtohdmi-adapter-housing-for-amiga-500

Print approx. €1.47–€1.79 excl. taxPreliminary estimate for one variant

Downloads
121
Likes
6
Rating
0
P
PrintablesFranziska

Vitamin effervescent tablet modular holder/stand. Very small print. Fits most brands.

My effervescent tablet tubes kept falling over on the shelf, so I just needed something simple to keep them standing up. I remixed an egg holder to fit the purpose, allowing me to add as many holders as I need in various configurations. I…

Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant

Downloads
107
Likes
16
Rating
5
P
Printablescomcloudway

Ancient Mayan Pyramid Planter

Ideal for small plants, moss, especially Iceland moss . I designed the model from scratch using OpenSCAD, but tried to stick to the shapes and dimensions (measured visually (aka guessing 😅)) of the Planter of the Ancient Mayan Pyramid…

Print approx. €5.48–€6.69 excl. taxPreliminary estimate for one variant

Downloads
104
Likes
32
Rating
5
P
PrintablesMnemorath

Tamiya Sanding Sponge Sheet Rack

There wasn't a good holder for Tamiya Sanding Sponge Sheets, so I made one. There is a slot for each of the eight grit levels and the rack can be mounted vertically, or horizontal. Uses about 275g of material.

Print approx. €19.28–€23.57 excl. taxPreliminary estimate for one variant

Downloads
104
Likes
20
Rating
0
P
PrintablesFlo

TAMIYA damper/suspension lower spring retainer spare part (e.g. Plasma Edge II)

Only driven a few metres and the first part is already missing and there is no replacement in the packaging? Then print one quickly :-) Needs some Support. As shown in the slicer screenshot.

Print approx. €0.18–€0.23 excl. taxPreliminary estimate for one variant

Downloads
103
Likes
17
Rating
0
P
PrintablesEric BEAUGUITTE

Friendship Bench or "Banc de l'amitié"

At my daughter school, one teacher ask me if I can design and print a friendship bench. You already know the answer: YES of course. The idea of the friendship bench is to send a message to other students to indicate that you feel alone…

Print approx. €4.07–€4.98 excl. taxPreliminary estimate for one variant

Downloads
98
Likes
19
Rating
0
P
PrintablesAinon3Dtisk

Perfect Family for a diorama or model railroad

Hello, I have the Perfect Family for your diorama or model railway. The figures are now in 1:15 scale. Here is the conversion for model railways, so you know how to adjust the scale: Scale Reduction Approximate height of the figure (cm) G…

Print approx. €9.09–€11.11 excl. taxPreliminary estimate for one variant

Downloads
96
Likes
11
Rating
0
P

Tamiya Blackfoot / Monster Beetle Rear Body Mount Cross Member (Part G1)

I needed a replacement for the original cross member, as mine was broken. The part is a bit thicker as the original one, but fits the model nicely.

Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant

Downloads
94
Likes
11
Rating
0
P
PrintablesCharly BEGOOD

AMIGA GOTEK Enclosure

This is my solution for the Gotek External Interface and floppy disk emulator. For the interface module i have made a simple enclosure for protecting the hardware. For the Gotek emulator i have made the Oled screen version with the two…

Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant

Downloads
94
Likes
9
Rating
0
P
PrintablesPeter Farell

Mesopotamian Pendant

Mesopotamian Pendant A somewhat masculine version of Ninhursag. Ninhursag was a significant deity in Mesopotamian mythology, often associated with the creation of humanity and the protection of life. A pendant like this likely served as a…

Print approx. €0.74–€0.90 excl. taxPreliminary estimate for one variant

Downloads
85
Likes
24
Rating
0
P
PrintablesBaGooN

Caution Pyramid Sign

Sometimes I inadvertently load filament without changing the nozzle, or to start printing without changing the steel sheet setting and damage the sheet... and it is frustrating to have to do it over again. To prevent such mistakes, I made…

Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant

Downloads
84
Likes
44
Rating
5
P
PrintablesXenGi

Noisy Cricket (Mini Gaming Keyboard)

The Noisy Cricket (Mini Gaming Keyboard) A minimal keyboard with just the basic keys for gaming on the go. Mostly targeted at FPS games with a focus on W A S D . The layout can be customized via the QMK firmware. The default layout looks…

Print approx. €0.86–€1.06 excl. taxPreliminary estimate for one variant

Downloads
79
Likes
37
Rating
0
P
PrintablesScared__Bunny

Flamingo Head Wall Mount

Do you have a special someone who likes Flamingos a lot? Say No more! The Flamingo Head is now mountable on the Wall! The original Model was KI-generated, the changes were not. You can either Print the Full model or the three Parts…

Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant

Downloads
63
Likes
13
Rating
0
P
PrintablesCharly BEGOOD

Commodore AMIGA mouse holder

Because i have a little desk for my A1200 & A500 & Mac Mini, i did it to save the space. 28/04/2025 : NEW version slightly less wide: 69 mm instead of 73 mm

Print approx. €3.77–€4.61 excl. taxPreliminary estimate for one variant

Downloads
63
Likes
7
Rating
0
P
PrintablesPeter Farell

Adamites of Boheima Bas Relief

Adamites of Boheima Bas Relief Imagine 15th-century Europe. People are starting to question the authority of the Catholic Church. One group that emerged with some pretty radical ideas was called the Adamites. These people lived in Bohemia…

Print approx. €6.60–€8.07 excl. taxPreliminary estimate for one variant

Downloads
61
Likes
18
Rating
0
P
PrintablesMultisystem

Heber CTRLDock Classic gaming interface

This is the stand alone CTRLDock Classic enclosure to use with the Heber CTRLDock classic gaming and retro controller DE9 and DA15 - for example Amiga/Atari and NeoGeo style control joysticks and pads.

Print approx. €6.62–€8.10 excl. taxPreliminary estimate for one variant

Downloads
60
Likes
7
Rating
5
P
PrintablesBooks

Pentagonal Bipyramid

A pentagonal bipyramid.

Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant

Downloads
56
Likes
2
Rating
0
P
PrintablesAinon3Dtisk

Cute wolf family

Hello, Welcome to my profile, full of models and miniatures :-) I have for you a Cute Wolf Family for a forest diorama, or just for the play. Very cute animals. It is suitable for coloring. My children absolutely love it :-). Important:…

Print approx. €3.54–€4.33 excl. taxPreliminary estimate for one variant

Downloads
54
Likes
11
Rating
0
P
PrintablesSchlumpf999

Joystick Gamepad Retro Arcade for PC (USB-C) and C64 / C128 / Amiga Projekt Joyweiler

Hello, this is a housing for the retro joystick project by Joyweiler for variant 5 with strip grid board and display. Many thanks for sharing the joyweiler project on gitlab and for allowing us to add a link to this project:…

Print approx. €3.15–€3.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
54
Likes
18
Rating
0
P
PrintablesiZero

Amiga laser mouse upgrade hatch replacement

This is a replacement hatch for newer style Amiga mouse's laser upgrade kit. It uses clip mechanism to secure the attachment. I used ASA filament and variable layer height with this print.

Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant

Downloads
51
Likes
3
Rating
0
P
Printablesgusilvania

MURO DE ALMACENAMIENTO

Este modelos esta formado por tres estancias, para el almacenamiento de artículos de oficina. Sin relleno. PLA.

Print approx. €14.76–€18.03 excl. taxPreliminary estimate for one variant

Downloads
46
Likes
3
Rating
0
P
PrintablesKat

Structural formula dopamine as LED neon light

Work steps Parts printing Connector 1 you need seven and connector 2 once. Assemble parts. Best on a suitable table. Needs some space. Insert cable. Leave some overhang so that you can shorten it when the LED strip is inserted. Fill the…

Print approx. €12.55–€15.34 excl. taxPreliminary estimate for one variant

Downloads
46
Likes
7
Rating
0
P
PrintablesEDO

PrusaMini steelsheetholder x3

made it easier to take out by shifting the sheet a little. It is recommended to fix it with double-sided tape.

Print approx. €2.71–€3.31 excl. taxPreliminary estimate for one variant

Downloads
45
Likes
17
Rating
5
P
PrintablesJamehz

Pyramids / Tower of Hanoi Stacking Puzzle

A pyramid-like version of the Towers of Hanoi. The pieces seat inside each other to make a nice pyramid-like shape. The whole thing is about 2 inches high and 3 inches wide, so it's very portable. Print as in the STL. PETG or PLA will do.…

Print approx. €1.73–€2.11 excl. taxPreliminary estimate for one variant

Downloads
43
Likes
7
Rating
5
P
PrintablesRetromanIE

Amiga CD32 TF328 Kipper2k v6 Exp adapter Back cover

A work in progress back cover for the Amiga CD32 TF328 Kipper2k v6 Exp adapter. It works as it is now, but needs more attention to really make it perfect. Print instructions Can be printed in any resolution really, but 0.2 seems like a…

Print approx. €2.55–€3.12 excl. taxPreliminary estimate for one variant

Downloads
42
Likes
2
Rating
0
P
PrintablesMultisystem

Heber Super CTRLDock gaming interface

This is the stand alone Super CTRLDock enclosure to use with the Heber Super CTRLDock gaming and retro controller classic Nintendo (NES & SNES) gamepads, sticks, mouse and multitap interfaces. Further details can be found here along with…

Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant

Downloads
42
Likes
6
Rating
0
P
PrintablesPitel

Sonic Amiibo tag

Don't forgot to add M601 pause around 3 mm and color change for the logo!

Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant

Downloads
38
Likes
3
Rating
3.5
P
Printablesyyy

Dell Gaming Monitor Raiser

This riser matches the base of Dell's gaming monitor, a (hopefully) less ugly way to raise the monitor a bit. My own monitor is a G3223D, but I think this should fit their entire gaming lineup circa 2023. See photo. As an additional…

Print approx. €5.00–€6.11 excl. taxPreliminary estimate for one variant

Downloads
38
Likes
5
Rating
0