Cable clip (computer cable managment)
Suggested print settings: 0,2mm layer height 65% infill 0.4 nozzle No supports needed - 45 degree wall is easy to print Post your makes, and like this project 😍
- Downloads
- 1,356
- Likes
- 145
- Rating
- 4.88
Counting matching models…
Suggested print settings: 0,2mm layer height 65% infill 0.4 nozzle No supports needed - 45 degree wall is easy to print Post your makes, and like this project 😍
Remix of great cable holders, useful for under desk organization etc.
Normal model has a provision for Magpul specific hardware. “Countersunk” model will accept the less expensive hardware found on Amazon/eBay. “Straight” & “Double Slot” model is a bonus added from early on in the design process.
Clip 1 - 10x6 Clip 2 - 16x6 Clip 3 - 22x6 -Bigger clip = more cables can be fitted -3mm hole for screw, or you can just use adhesive substance -Clips need some force to be clipped together
Update 24/09-2026: Updated resistor link and quarter watt sign. Update 15/09-2026: Added a wiring guide and slight update to model description. Update 28/08-2026: Updated description, added white LED switch and plastic washer, all kits…
Universal Molle system adjustable holder. Easy to set. Printing without support. You need only cc 30cm round rubber (Hat rubber). Not for sell!!!!!!!!
Just a simple wall mount D-ring for cable management. The provided STL inner opening is 30mm x 30mm. I have included the Fusion 360 file if you want to change this to a different size. Just update the length and width parameters. Print in…
Dieser Beitrag könnte für alle interessant sein, die an ihrem Prusa mk3s dieses YZ-Case von Fuhrmann verbaut haben und mit dem Übergang der Kabelstränge in das Gehäuse nicht ganz glücklich sind. Auch ich habe vor kurzem meinem mk3s dieses…
With this object, you can hold all your cables easily and simply on your: Desk, Shelf, Wall... With just a little double-sided tape strong enough. It fits with thicks cables such as HDMI cables. Can be printed with PLA and a 0.15 printing…
Welcome! I needed an easy way to manage all the addons and cables inside and outside of my Prusa Core One printer, so I designed a magnetic cable holder solution. The cable holder can be fitted anywhere inside/outside the printer, and…
Stand for Huawei watch GT One version with cable managment, and one without. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20 Category: Mobile Phone
If you want to use this for a clamp meter that is different from the fluke 378/377 send me comment and I'll see what I can do Have attached a video to show the different ways I use to store them. Print with 2 walls and zero infill. Any…
This slim smart speaker stand is designed with built-in cable management in the base. It is printed in 2 parts, a “body” and “base”. The base resistance fits into the body holding the 2 pieces together. Both parts are printed without…
3 wire cable management clip for the Ikea Fredde desk. Left and Right options available. To be mounted on the metal framework of the desk, optionally you can use an M3x12 grub screw for additional grip. Printer = Creality Ender 3 V3 SE…
Core One + Gen2 INDX rear mount for the filament sensor with integrated cable management – no loose cables outside the printer. This rear-mounted bracket is designed to provide the shortest possible filament path from the sensor to the…
Now, Hear me out, please. I know that we needed to have a designed component to our idea, but for this, we really don't need a 3D printed part making this extremely quick to use. Print instructions Using one of the holes on the Prusament…
Small circular 5x ethernet cable organizer with a center hole to allow it to be hung or have something like a guide wire ran through the middle to keep things consistent. Very fast to print due to it's size, no supports required.
I needed a way to manage my cables along VSlot aluminum extrusions on my self-made CNC router, so I created these bricks. They fit into one 20mm VSlot profile and have slots for two (up to) 4mm zip-ties. To mount them onto the VSlot…
Here are 3 different cord management clips designed to be used with IKEA IVAR shelving systems. A horizontal and vertical clip press fits into the holes in the IVAR sides and a last clip press fits onto the edge of the shelf. Print…
I designed this model to space my desk off the wall and allow me to control my cables under the desk. You can pass cables through the lower opening or through the two integrated holes. The 1.125" model fits my IKEA Ekbacken countertop.…
A simple case to hold DS18B20 Temperature Sensor that uses 6x3mm magnets that snaps together and magnet cable management. no support, .2 and 15% infill
I recently upgraded to DXC extruder on my K1max. This extruder has a filament sensor, and the wires are attached to the MCU from the back of the toolhead. In addition, the motor connection to this extruder requires an extension cable…
These printed parts when assembled allow you to support the conduit and PTFE tubeing to the extruder of an Ender 7 printer if you remove the top cover shielding the belt system. This can be seen and explained in the video below. Any…
I needed a mount for my power supply / surge protector, so i made one in fusion 360. fully print in place, with supports, snap out supports, enjoy. If you find it useful, buy me some coffee, thanks. Category: Tools
Hi Guys, I just want to introduce my solution for a usable storage for all USB chargers. Simply plug in the cable and insert the plug. It's already cleaned up. It's just mounted with a Nail or Screw with a hole in the backside. Print…
Cable Management Clip for Yamaha E-Drum Set. For tube diameter of 38 mm. Cable guide opening measures approximately 24.5Cable Management Clip for Yamaha E-Drum Set. For tube diameter of 38 mm. Cable guide opening measures approximately 24.5
Filamentmanagment to connect your Drybox with a PTFE-Tube to your Enclosure
Simply added back the ziptie cable management as I prefer it when using my carto.
Strong Cable guide, easy to use. Work with pc motherboard screw for the covers. Insert recommended
Pass a ziptie or a velcro strap trough one of the holes (it works either direction) and bolt the frame to the desk using 2 (or more) screws. The screw holes are 7mm in diametre and have a 9mm countersink.
This kit was made for the stock Lk4 3d printer. Any questions please ask. I am no longer running this setup, but it was good at tidying up the cables. Category: 3D Printer Parts
this is for your cable managment so you can screw it in to something and then you can zip tie the cables thanks funkyart
I recently upgraded to DXC extruder on my K1max. This extruder has a filament sensor, and the wires are attached to the MCU from the back of the toolhead. In addition, the motor connection to this extruder requires an extension cable…
this is for your cable managment so you can screw it in to something and then you can zip tie the cables thanks funkyart
Simply added back the ziptie cable management as I prefer it when using my carto.
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) CABLE MANAGMENT BOX Tired…
This is is a cable holder with mount for the cable plug (see picture) for your EC home charger. It keeps the cable tidy and clean. I printed mine with PETG since it is used outdoors. If exposed to a lot of sun I would recommend printing…