Bees in Kaos - coaster
20 cm, 10 cm five colours Use colours of fire, flames and smoke.
- Downloads
- 105
- Likes
- 34
- Rating
- 0
455 models
20 cm, 10 cm five colours Use colours of fire, flames and smoke.
100x160mm sign, answering the eternal question: “Are you a Good Fairy or a Bad fairy?” Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with included gcode for the mesh…
Check out: https://www.instagram.com/p/DL3EdTxtDFS/ Another take on time. Everything is affected by time, and small changes often lead to large and unforseen outcomes and... kaos The clock can be bought here:…
Multicolour keychain remix of the Blades of Chaos by Thinkibot on Thingiverse The 3mf is compatible with Bambu Studio. There's a bloody and non-bloody version inside the 3mf. Filaments used: eSUN PLA+: Fire Engine Red, Black eSUN silk…
Painted by Sarah Wade These swords are replicas of the sword wielded by Kratos from god of war. They print in 7 part and has a hole for a 5mm rod to help them align and makes the swords strong. All the detail, like the cracks is actual…
Updated 28th August 2024, current list of bases: 25mm round 25mm slotted round 25mm hex-hole round (Skaventide box) 32mm round 32mm hex-hole round (Skaventide box) 40mm round 50mm round 60mm round 60x35mm oval 75x42mm oval 105x70mm oval…
General This gives Lucky 13 the power of the God of War. Since there is a chain attached at the end of the blades, you assemble the pieces a little bit on Lucky 13's hands. It's simple enough to slide the blade on the top of the hand, and…
Fourth set of Sonic figures based on Dr. Eggman and other Sonic villians. Set includes · Modern Eggman · Metal Sonic · Chaos · E102-Gamma (Still Painting, will update when done) · Infinite (Both with the blocks as a base and Infinite and…
3D printed accessories for AOS 5 and 5.5 V2 FPV quadcopter frames. More info: https://www.aos-rc.com/ Designed to be printed in TPU for flexibility and protection. Minimum 2 perimeters/walls and 5/4 top/bottom layers, infill 20% up. These…
EN Project under construction . The basic idea behind this printer is the template from MAQUINA with the PrusaBox project. I took that up and made the ChaosBox out of it. Everything he had drawn was made printable and public. The whole…
For all Warhammer 40k players who want to carry around their CSM Combat Patrol! This is a small board that holds all 10 Chaos Space Marines, 5 Havocs, the Dark Apostle and Disciples, and Hellbrute. At worst you may have to print it at…
Holder for Arkham Horror "Chaos Tokens". Prevents the cardboard tokens from sticking together in the bag while being a bit smaller than the coin collectors that many folks use. I added some knurling round the outside because I fiuigured…
A step in the right direction to becoming “The Ultimate Lifeform”
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
Iconic chaotic antiheroine with twin pigtails and bat, inspired by the DC universe.
The model is slightly longer than the real Blades of Chaos, with the model coming in at ~28 in Just like my previous Draupnir Spear, this model is also fully 3D printed and involves threads in the handle, and the blade is glued with the…
Here's my proxy model for the Gloomhaven: Jaws of the Lion Chaos Demon! This model was a lot of fun to make and a lot of work! In the end, it's a crazy chaotic mess of spikes and tentacles... so I'm pretty happy with the result =) I…
Warning before impression : the model of sonic and chaos emerald are in the same proportion. In the slicer or app for printing change the scale of the model at the same. PS : the model are very small.
Gridfinity Cups with a Voronoi chaos pattern cut out of the walls, all sizes 999 models. Voronoi patterns are generated using points on a 2d plane. To generate the chaos pattern a fixed number of points are placed randomly on the plane.…
A fun, dynamic and thought provoking physics demonstration to visualize chaos and unpredictability. Even today, it is still not possible to calculate and predict movement of the two pendulums. Model is fun to play with since it…
A chaos orb from the game Path of Exile, I took the original head model, duplicated and transformed it into place. The model is split to two so you can print it without supports and glue it after.
Its a simplified version of the Blades of Chaos from God of War Ragnarok game for the popular dummy 13 toy. Printing at 150% is recommended for enhanced handle durability. I printed it in two colors with a single filament change to…
A friend/coworker wanted a 3 headed elephant figurine. I found a 4 headed set by Spizmar on Thingiverse ( https://www.thingiverse.com/thing:3807544 ) So using it as a model, I created a 3 headed version. I do not consider it a remix as I…
Hey we've got to have tokens now. You can use this! Should work however way you want to print it.
Weil ich das Projekt unbeabsichigt gelöscht hatte, mußte ich es gerade alles noch einmal neu machen. Entschuldigung dafür. Dadurch fällt leider das bisherige Update Log weg. DIESES PROJEKT IST NOCH IM AUFBAU UND ES SOLLTE MIT DEM BAU NOCH…
A 3D model of the Blades of Chaos from God of War. Blades are perfect for cosplay or display purposes.
An easy to print chaos pendulum. The chaos pendulum is fully 3d printed. You have to print the nut twice.
Been searching for solutions to pimp up my chaos bag for a while, and i'm not a fan of the coin capsules everyone else is using, so after stumbling upon something similiar over etsy i thought about modeling my own version. This is a token…
🌀 Unleash the wild, reality-warping fury of the Chaos Dragon Bust! A creature born from pure disorder and swirling cosmic madness, this dragon radiates unpredictable power. With twisting, flame-like horns, jagged overlapping plates, and…
Objective markers, objective zones, and a carrying solution for them to travel. The carrying case is built to stack, so that tournament organizers can travel with multiple sets. The HolderBase is a few millimeters taller than it needs to…
DJI Dual Antenna Mount for AOS5. Fits well with my AOS5 ELRS Antenna Mount. Can be used seperate or combined.
Info: just a fun simple hexa tile, but with a road on it, which can be random even when this is only from a single tile contains also bridges Print info: 0.1mm layers for better road bridging
Is that bleating in the dark woods a goat or two, or is it a vicious Beastman that is coming to sow chaos and destruction in the village? nonPareil institute is committed to building better futures for adults with autism through technical…
I love to make useful 3D Desgins, and i love Coffee: Buy me a Coffee: https://www.buymeacoffee.com/phitscho Or Twint me something over 078 713 68 61 THANKS! Here I provide all my 3D-designs and needed parts to build a 7" AOS 7 build with…
I am converting a passive subwoofer to active, and so got this amplifier from amazon: https://smile.amazon.com/gp/product/B01N5DGK37/ It comes as a bare board, so I needed a case, this is it. The first run fit pretty well, I had to use a…
GPS mount for AOS 3.5 V5. Fits 12mm*16mm*4.5mm GPS like GOKU GM10 Nano V3 or FlyFishRC M10 Mini Print Settings Printer Brand: Bambu Lab Printer: A1 Mini Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Filament: Spectrum TPU 98A Lion…
Here's my model for the Frosthaven Boss, the Lord of Chaos! I made it as self-supporting as possible, but there's still several outstretched limbs that're gonna need supports. Fortunately, none of the “interior” of the model has overhangs…
This remix is a pre-supported version for resin printing of the original model. Supports were created manually in Lychee slicer and successfully test-printed. Post-Printing "To remove the supports, use your wire cutters to clip them off…
Forged in ancient times (or possibly last Tuesday), this dragon-etched demon mask holds the spirit of a warrior… who occasionally forgets why he walked into a room. Channel your inner guardian beast or just freak out your mailman — both…
35° antenna mount with 32mm post spacing, designed for the DJI O3 antenna and AOS5
Marks of Chaos tokens to easily identify units and their allegiance. One file for each God: Khorne, Nurgle, Slaanesh and Tzeentch The logo can be printed with a different color as illustrated in the main image. Everything was printed with…
As far as I know there was no mounting hardware for AOS 3.5 v2 on Thingiverse or Printables. Now there is... Sorta. I frankly suck at CADs and it took me a better part of the day to just make these and test if they actually fit. Included:…
This fun and quirky pen holder combines the charm of the iconic Labubu with everyday functionality. If you're tired of boring, plain desk organizers, this design will add a dash of mischievous humor to your space. It's perfect for holding…
“In the mist of chaos, there is also opportunity” - Sun Tzu In the chaotic world of 3D printing where things can sometimes appear to be random or out of place, we, the makers & designers, have the job to still manage to see through all…
Made a blade of chaos remix for this amazing fidget based on model https://www.thingiverse.com/thing:754893 by Thinkibot
Insert for Chaos expansion for the game Karak 2 - you can exchange it for the figure holder in my original insert - here is the link: https://www.printables.com/model/1316316-karak-2-imperium-insert Insert for all ingame expansions here:…
EURORACK Blank Panel │3U – From 2 to 20 HP │ "Circuit Chaos" Best to print with a 0.4mm nozzle, layer height 0.2mm or smaller. The “circuit chaos” is made of 0.5 and 1mm pipes so technically it is possible to do 2 colour changes, I think…
A movement tray for 32mm bases Magnetic - designed to use 5x2 magnets. When printed with a 0.4 nozzle, they fit snug but I still used super glue, just in case. This may depend on your printer or filaments tollerences once printed. Used…
Overview: Antenna & GPS Mount designed for the AOS 3.5 Frame. It was made to fit the DJI O3 Antenna and a micro GPS module, angled at 30° for optimal signal reception. Tested with Foxeer M10Q 120 and Newbeedrone M10Q Micro GPS modules.…
This is a mount for the newer version of the Caddx Vista antenna. You can remove the tube and run the antenna coax through the hole. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2 Infill: 20…
Scientifically accurate model of a beipiaosaurus, a species of therizinosaurid. The model features high-poly feather and skin texturing along the model. It measures 7.25" long. I recommend printing it at a finer layer height or with a…
Raw material: TPU95A Esun No supports Print speed 30 mm/s Layer height 0.17
Chaos Lord from Ice Age. I filled out the lower body with armor heavily inspired by Skyrim's Dragonbone armor. I added a second dynamic pose because the pose in the art seems pretty static If you want to help me keep making free models or…
A followup to my UL5 parts page, now for the new AOS LR5 O3 version! Also see my new O3 Camera Pod design ! Made to fix all the issues with mounting the DJI O3 Camera on your AOS frame (or many many others) It also offers dipole antenna…
AOS 5 v5 antenna holder for Crossfire Immortal & small antennas AOS 5 v5 Antennen Halter für Crossfire Immortal & kleine Antennen
Hello fellow AOS frame owner. This part was never tested. I hope it works. I'd appreciate the feedback! Best print orientation and supports is shown . If you have something different in mind you can ask me . IG: frenzyincarnate . If I…
Base Plate & Roll-Cage parts made of ASA for CADDX GM3 Gimbal to be mounted on an AOS frames, model UL7 and probably Cine35 EVO . To check if it will fit other frames before printing everything, just print the “base” piece…
I built this model because I had three rival Chaos's with broken conveyor belts. If you print this out of TPU it works pretty great. I used gizmodorks 95a TPU. If you have issues let me know..
I noticed a unused sliding lock at the base of the magazine. Maybe it was intended for a speedloader, but Zuru but never released to the market. So I made my own speedloader. I printed this on my modified Ender 3 v2 with the following…
This is a mount for the AOS 3.5 v2 to fit the stock Runcam Thumb Pro 4k holder or similar cam holders. I've added 2 versions - v5 is the earlier that allows a bit less uptilt and v6 lets you adjust the uptilt higher for faster flying.…
Remake this wonderful miniature to Tiny Style, proportions based on Dragon Forest Skeleton. Small body, big head, total fun :) *This is made on my 22.5mm multi-purpose scale with octogonal bases [crazy right ?] Quiet wild colt, there is a…
AOS 5 v5 Holder for 21mm x 21mm GPS module
Holder/mount for SMA antenna connector and M10Q GPS Module for the AOS 5 frame
Mein erster Versuch einen Walksnail/ELRS Antennen Mount für einen AOS 5 Frame zu konstruieren. My first attempt at constructing a Walksnail/ELRS antenna mount for an AOS 5 frame. Print Settings Printer Brand: Creality Printer: CR-10…
Happymodel EP1 2.4g ELRS antenna mount for the AOS 3.5 frame. 4mm height at the standoff mounts, gives enough clearance for the VTX antenna mount. Print with TPU, 25% infill, 5 perimeters. Bend the two halves of the mount, then bend the…
Philm0's AOS 7 parts Parts A decent GoPro mount. Lots of fillets so the flimsy TPU does not rip apart Grip holes for the nut and bolt of the GoPro so they nicely stay in place Capacitor holders that go next to the center stack. The inner…
Here are some tokens I made to act as “Defiled” tokens. The logo can be printed with a different color as illustrated in the main image. Everything was printed with the Prusa Mini+ using Fillamentum PLA. Works fine with a 0.25mm setting…
Nothing special about it. Holes are little bit tight, but just enought to avoid free movements. Could be printed in PETG, PLA according to your needs.
I needed an antenna and GPS mount for the AOS UL5, and thought I'd share it. This is for the O3 Antenna and the Matek M10-5883 GPS. Printed in TPU w/ 50% infill it came out under 5g This is a work in process, feedback is always welcome.
This mount is for the BN-220 GPS and uses the 32x32 mm pattern of the AOS frames. I printed this in carbon fibre reinforced nylon (PA6-CF), but any other material should work fine.
Saw this type of double pendulum on IMGUR or somewhere, recreated the idea here. Giving the bar a spin or holding the bar to the side and giving the ring a spin seem to be the common ways to start. Uses two 608 bearings but you can add…
AOS 5 Adjustable GoPro Hero 7 Mount. Required Hardware: M4x25mm M4 Locknut
This is a two part design based on coin capsules and is designed to enclose chaos tokens from Arkham Horror the card game. The inner diameter is 25.5mm to allow the token to be inserted/removed easily. The viewing hole diameter is 22mm.…
Note that it works better if some sort of transparent plastic screen is attached to the front. Funciona mejor si se coloca algún tipo de pantalla de plástico transparente en la parte delantera.
Check out this awesome project I made called "Cat Chaos: Jenga Edition"! It's a 3D print of a cat tossing a Jenga tower, and get this—I added a hole in the middle of the tower. Why? Well, it doubles as a dice tower for board games! Cool,…
Iflight GoPro 8 decased mount for AOS 3.5 Category: Hobby
Introducing the HexaCable Organizer: The Perfect Solution for Taming Cable Chaos Are you tired of dealing with tangled cables and messy desk spaces? Say goodbye to cable clutter and hello to organized bliss with the HexaCable Organizer.…
Camera Body Mount to mount DJI O4 Camera to AOS5 standoffs. 15 Degree tilt. Use in conjunction with my DJI O4 Lens Cap for full protection(ish). Print without supports.
Print in TPU. Secure with M2 screws and nuts.
**This is an update of my first 3D design for printing, almost finished! Would you pay 4$ for 3 poses of this model (once it's done) with and axe? My name's Juan, I'm from Barcelona, Spain. I'm new into 3D Printing, I have not much…
Es una figura creada desde una imagen con IA
Because I did not find any inserts for Chaos in the Old World board game I decided to make one. My goal was to minimize setup. Each player gets tray with everything he needs: Chaos cards Upgrade cards Followers Corruption token You can…
35: Fits the stock 2mm thick bottom and middle plates. 25: Two versions to fit both the stock 1.5mm and 2mm bottom and middle plates offered by cnc madness.
Reversible SMA mount for AOS frames. One side has dual SMA mounts, other side has single. 20mm tall 4mm for M2 standoffs 5mm for M3 standoffs TPU 100% Infill Support everywhere
Need a quick Chaos Plane or Alien World base for your Warhammer 40k, Age of Sigmar, D&D, or any other miniature? Here you go! If you might be looking for enough bases for a whole army be sure to check them out here…
Initially remixed this to natively fit the Cine25 which has M2 mounting holes in the front and M3 in the rear. Made a reversed version to centralize the center of gravity (AOS_R_M2M3_GoPro). TPU 100% Infill (can use less) No support
Sets of movement trays and unit/model bases for your fantasy wargames. Each of the 25, 32, and 40mm bases/trays are keyed to ensure that your models stay in place and maintain the contour of the texture / terrain. Each base has room on…
Glued everything together with some 2 components epoxy. Parts you need: Everything needs to be printed once. Except for a few files. 2X Handle decal A and B 12X Silver nub Colors used. 3Djake EcoPLA black 3Djake EcoPLA bronze Fillamentum…
Inside radius is 40 mm (standard objective marker size) Distance from inside radius to outside radius is 1 inch (control range distance) Default height is 0.75mm.
I really like the parametric Gridfinity Storage box by Pred, but I don't need the stackable design. And I even like the look of the rugged box by Whity more. So I combined both of them in a 4x5 Gridfinity box. This edition contains a lid…
AOS 3.5 GoPro Mount Just a mix of the 2 designs All credit to original creators Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Infill: 100 Filament: Generic TPU Category: Hobby
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! Hello Everyone I designed a magnetic case for the MITUTOYO Absolute AOS Digimatic Caliper 150 mm (500-196-30) – the…
I asked a friend to model them after the ones found on thingiverse https://www.thingiverse.com/thing:5246882 The designer never responded and they were incomplete :(, so my firned made it complete, yay. Leave a like, make it will help in…
I created several coaster models based on this model. The rest are on my profile. I really wanted to print some Runescape themed coasters, but found that the models already out there were kind of bad. Print with 20% infill for best…
AOS 3.5 antenna mount, fits the stock dji O3 antenna and the Radiomaster RP1 ELRS antenna. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: amazon basics TPU grey…