schroef, propeller, hélice. Bootschroef. Hélice de barco. Hélice de bateau. Boat propeller.
Een kleine propeller van in de les Inventor 2022. A small propeller from the Inventor 2022 lesson.
- Downloads
- 2,534
- Likes
- 117
- Rating
- 5
521 models
Een kleine propeller van in de les Inventor 2022. A small propeller from the Inventor 2022 lesson.
Wegen het succes van mijn bootschroef met drie bladen heb ik er ook 1tje gemaakt met 5 bladen. Voor iedereen kan kan ik meerde of minder schroef bladen maken. Due to the success of my boat propeller with three blades, I also made one with…
parkrun is an international organization of free 5K races, every Saturday. The only thing you need to bring is a printed barcode. But 2D printing is so 20th century. This simple model generates a valid credit-card-sized parkrun barcode…
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
We ordered the scanners and the bases, but bases were backordered with ETA 6 months out, so we designed our own. Use 0.15, PETG, black or any other colour you like, in fill 100% to make it strong as possible. Its beet working for about 1…
Base para colocar una fotografía instantánea de una cámara Polaroid Now sin el margen, tamaño del soporte 6,2x4,6 cm. Se colocaría en la pantalla del modelo y queda muy bien. Recomendable.
Update 16.02.2025 : The newer X1C/P1S have minimally smaller filter niches (very tight tolerances) - I have now adjusted the size. Now fits this version the old AND newer X1C/P1S perfectly! 👌😊 It was time to replace my activated carbon…
Egyptian Sarcophagus Pencil Box or Dice Box. !! LImited Time Offer !! Download now and get a free Mummy. For now .. Just use a rubber-band to hold it together. If you are feeling industrious and want to hinge it or snap fit it Please DO…
This is a refillable Activated Charcoal Filter Box for the BambuLab X1. The filter medium should be replaced every 50-100h or as soon as you start smelling your ABS prints again. It saves you money and reduces waste! Best used with…
A simple screw-mounted air filter for the CORE One. It will require higher fan speeds during PLA printing due to added resistance. I manually increase the speed to 65%, which results in ~32°C in the chamber. I strongly advise always…
Bedarf keiner Anleitung ;-) Und da ich STL nicht ausstehen kann hier auch die Fusion Datei
Overlay tile replacement for the board game Gloomhaven. Two files are mirrors of each other for the two different colored tiles. Tile Count: 4 (4 yellow, 4 gray if you want to get technical) Print instructions Print Settings Supports:No…
Hello! Here is my design of air filter/fume extractor for my enclosed or not printers! I designed it for these HEPA filters: https://fr.aliexpress.com/item/33037955841.html?spm=a2g0s.9042311.0.0.27426c37H91RYB And finally I decided to use…
I have a lot of scanners on the production line I manage as an engineer. Most of them are Honeywell's 1950GHD which come with quite flimsy holders (oversized). I designed something that is a bit more tight and can be easily attached to…
This is the sarcophagus for a 3D map I'm building of the Redbrand Hideout. The Redbrand Hideout is a location for the 5e D&D Lost Mine of Phandelver campaign. This is one of many objects I'm creating using Mike Schley's original art as…
Important: there are 2 options that mount to the cc2, one is the pipe which allows you to use ALL/Any of the MODULAR system, the other is just a connection to go from the cc2 to what ever ducting you have, this does not allow any of the…
This is a desk clamp for holding a Clearcom FreeSpeak comm belt pack to a desk. It is large enough to fit other belt pack style partyline comm packs. But it perfectly fits the Clearcom FreeSpeak belt pack as pictured. I was tired of using…
I did a fusion 360 reverse engineering of stl files. I modified the path of the gear to better fit and generally improved to print with FDM printer UPDATE 1 05/12/18* Added a new screw to better keep in place the e3d v6 extruder with less…
Benvenuti a Venezia! 🛶🇮🇹🌆🎭🚣 Welcome to Venice! NOTE: The sculptures are a separate publication due to license. Please download them for free here . One of the top landmarks of Venice has come to MiniWorld3D, in ultra-detailed versions…
Dear Friends, I just wanted to try 3th part heat bed plate from the Aliexpress. Of course i have identification problem. I tried 3d printed QR or barcodes but it didn't solve the identification problems. Then I bought UV resisted plastic…
I printed with PLA 20% infill. No Supports Printed standing up There's three models: One button, Two buttons, and one for Three buttons.
Dreiteiliger Ständer für Barcode Scanner. Zum Unterschied von meinem geschraubten zweiteiligen Modell ist dieses dreiteilig und wird zusammengesteckt und mit Klebstoff gesichert. Gedruckt mit PLA 15% Infill und 2 Perimeter. ……………………………..…
Simple wall holder for Barco Clickshare Button/Dongle. Mount with double sided tape, but let me know if you need a version with hole(s) to mount with screw(s)
A simple barcode scanner holder for use on the table. Instructions to Print Better to print by placing it aside, using supports. Use minimum infill (1-5%) for support.
This is a belt guide to replace the standard belt guide from Sparco. It is additionally required: 1x M8x100 2x ball bearing 608zz - 8x22x7 4x M4x20 4x M4 nut The nuts are inserted into the side of the front cover. Do not overtighten the…
An easy printable model of Palazzo Ducale (Doge's Palace) and Basilica San Marco from Venice, Italy. “The palace was the residence of the Doge of Venice, the supreme authority of the former Republic of Venice. It was built in 1340 and…
Shifter Knob Sparco Style for logitech shifter
Zweiteiliger Ständer für Barcode Scanner. Man benötigt noch einen M6 Gewindeeinsatz zum Einschmelzen und eine M6 x 20 Senkkopfschraube mit Inbus um das Oberteil zu montieren. Gedruckt mit PLA 15% Infill und 4 Perimeter. ……………………. Two-part…
Another variation on adding filtration to the Creality K1. This one includes HEPA (for particulates) and activated charcoal (for VOC, volatile organic compounds) in one snap-on assembly requiring no modification of any sort to the K1.…
**UPDATE: Although very tight at first, the filter seems to loosen and can fall off over time due to the K1 back ribs flexing outward. Recommend using doubleside tape or similar adhesive to keep filer plugged on the K1 (6/12/2024)…
The Sparco gear knob is a popular low cost shifter for your Thrustmaster TH8A shifter, but the fitment leaves alot to be desired. This adapter securely mates the TH8A thread to the internal diameter of the Sparco knob with zero flex .…
These are the SVG to STL conversions of the amazing Arkham Horror LCG Standees created by Yves Tourigny, uploaded with the artists permission. To find the original SVG files and loads of other amazing work, please visit…
I designed this arched support both for minimal style easy to print and convenient to move.. tested with Iphone 13 max, Iphone 16 pro and iphone XS
Mummy in Coffin! 🎃💀 Unearth a spooky surprise with this original FREE 3D printable FLEXI mummy figure by BURSHI TOYS! Nestled inside a coffin with sculpted skull details, this stylized character brings playful horror to your Halloween…
EN - Translated with Google Translate Municipality of Arzignano Department of Communications Rendering and web visual Enrico Marcigaglia 3D model Nicola Perpenti, Graphic Service snc - www.gservice.eu 3D survey and scanning UNOCAD s.r.l…
SKÅDIS / SKADIS Barcode Scanner Holder This Skadis Barcode Scanner Holder is the perfect addition to your Skadis board, providing a secure storage solution for your barcode scanner. The model is specifically designed to integrate…
Visigoth sarcophagus, Malagón, Spain
Design by: Anna Reumann (Member of ZDKderPHB) These practical holders can be used to build a course for autonomous robots out of cardboard boxes. The design was adapted to Amazon packaging boxes (Thickness: 3mm). Super extension for the…
Made a quick project to reused an old 120mm fan, a switch, and a 12v barrel jack. Charcol Filter optional. Hardware: Qty 12 M3x7 Heat-set Threaded inserts Qty 4 M3x30 Socket cap Screws Qty 8 M3x10 Socket cap Screws Electronics Power Jack:…
Un diseño que hice durante mis estudios. Este arco mide en su stl unos 145mm, con lo que es mejor escalarlo para que se adapte a lo que queráis. Impreso con PLA de imitación de granito. Pretendí remarcar la Clave, las dovelas y el perfil…
I have a lot of scanners on the production line I manage as an engineer. Most of them are Honeywell's 1950GHD which come with quite flimsy holders (oversized). I designed something that is a bit more tight and can be easily attached to…
A new 3D figurine generated by AI, a pharaoh sarcophagus. Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
🇬🇹 ¡Bienvenidos a Guatemala! Welcome to Guatemala! This model was created by Dany Sánchez . The Santa Catalina Arch is one of the distinguishable landmarks in Antigua Guatemala, a UNESCO World Heritage city that used to be the capital of…
Este marco es para instalar una radio 2DIN en un Renault Laguna 2. La radio se atornilla a las solapas del marco (hay que hacer antes los agujeros en las solapas según el aparato de radio) y encaja perfectamente en el compartimento, de…
10 mm and 12 mm Version available, 10 mm should fit mosts Seats. Mirror the parts in the slicer for the right side. Additional parts needed: 18x Screw M3 DIN912 16 mm for 10mm Version, 18 mm for 12 mm Version 18x Nut M3 DIN934 2x Screw M6…
A Sparco driving force shift knob. Just use the original screw, no need for adaptors or mods. Support is not required but it may be helpful to add manual support right at the bottom. Just place the S Logo on top, Youi can glue if you like…
I designed this filter so that I can use charcoal pellets on my K1. The ventilation grid is optional and can be disabled (set parameter vww to 0 ), so that you can use filter cartridges of any size and brand. I'd suggest to print this…
Kingroon KP3S Printed with 0.4 nozzle, layers 0.2mm, 100% infill. Filament PLA BASICO fron Ctrol 3D in several colours. Yellow thick 2mm, black 1mm and white 0.8mm. Impresora Kingroon KP3S Boquilla 0.4mm, capas 0.2mm y relleno 100%.…
UPDATED DESIGN: I completely re-designed this to be smaller and more effective. New model can be found here: StopVOC Redux I printed a lot of matte PLA recently and it was stinky. Walmart has tubs of activated charcoal for $8, and I had…
This is now a much better model than before. I have worked on it for hours to increase the details, and reduce the triangle count. It is much easier to slice and prepare the model for printing. This is a model for the Sarcophagus of…
If your printer is too loud, you have now the possibility to use the silent mod from my video. The noise comes from the rear cover and its 4010 fan. Step 1: choose the preferred fan mod. either the 4020 blower fan or the 6015 axial fan…
Thanks to Stefan from CNC Kitchen for the great model. Easiest way to print is loading the 3mf file. If you want to use the stl load the filter stl right click on the core one filter in the right dialogue add modifier > load … right click…
The sarcophagus from The Fifth Element movie.
A poop collection tray designed for the Phrozen Arco printer. Can be placed behind the printer and snaps with magnets to the plate below the poop exit. A foot that goes under the printer has been added and makes it easy to place the tray…
Marcos de fotos para las láminas de la instax mini.
The HEPA filters: uses the same HEPA filter as BentoBox. It is 80mmx40mmx15mm you can get it on Amazon or Aliexpress
Japanese-Style hand fan for fanning charcoal (Binchō-tan). I guess you could use this for other fan uses as well? Print Settings Printer Brand: Monoprice Printer: Select Mini Rafts: No Supports: No Resolution: 0.26 Infill: 15 Filament:…
marco para foto
Stylized Chernobyl NPP sarcophagus inspired by S.T.A.L.K.E.R., brutal industrial form for post-apocalyptic scenes.
This is a remix of Drew's model that is slightly wider to accommodate the ever so slightly wider clip on my Clearcom RS-701 belt packs. I redrew this model by just using Drew's as a reference so there could be other differences, but it's…
VGrow Vivosun has an awful filtration. Hope you will find this model useful. This model is designed for 2 mm sealing tape or foam rubber on each side. Materials: HEPA Paper - H10 up to H14 Active Charcoal - 1 kg Sealing Tape or Rubber…
This remix uses the similar (exact same) approach for attaching the filter unit as https://www.printables.com/model/1182705-vento-for-core-one-activated-carbonhepa-filter You need to glue the 6x2 magnets to the holes for magnets( they are…
¡La cazadora del inframundo – Succubus Arquera Infernal! Diseño 100% original: succubus demoníaca con piel roja intensa, grandes cuernos curvados negros, alas de murciélago extendidas, cola espinosa y cabello largo negro. Expresión…
I bought some second hand wheels for my Ford Fiesta ST that came without the centercaps. I printed using ASA. You may need to scale them for a perfect fit. These were printed at 98% scale but could have been slightly larger for a tighter…
This is my first time ever to design a 3D Printed parts. Hope you'll like it
Simple frame to replace the original of a mirror that I had at home. The maximum dimensions of the mirror itself are 149mm x 203mm For the back cover I used a sheet of MDF.
Barcode scanner holder for privacy screen. The other bracket is designed as an angle to stick it to a table or cable duct, for example. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No Resolution: 0.2mm…
I think in the meantime you get an idea about my passion to SciFi robots :) … Here comes another model which is originated from late 80s cartoon series “StarCom”. As usual the robots are the minions of the evil … so as well in this…
I wanted to shrink down the original to give the air a better chance of making it through the charcoal and also so that it would fit better inside an enclosure. Make sure to use the wedge from the original design
Using the G-Codes from PIXUP-Slicer, we created this Orca-Slicer profile. We used it for more than 300 printhours now without any problems.
this prehistoric crocodile had a bump on its nose just like the modern day gharial
A simple design that allows you to use loose charcoal pellets to refill the exhaust filter on the Qidi Plus 4. This goes together well with the larger 8038 exhaust fan mod Support for 4 mm charcoal pellets + scorch, the Nevermore pellets…
Quick to print, I recommend 100% fill. Designed to make using the barcode gun more convenient.
Needed a NA Logo for the door of the church, so I modeled one up in Fusion 360. There are 2 files here one with a circle around the Logo and one without Category: Other
A space ship designed for deep universe exploration. Named after Marco Polo the explorer. It has a copper or bronze look because of all the space debris that has made contact with the hull. It is designed to fit the stand that comes with…
Sarcophagus Mimic! A quick and dirty edit of my Coffin Mimic to be a sarcophagus (Flesh eating!) instead of a coffin. Designed to be printed with the teeth and tongues oriented upward for minimal supports needed! Prints on FDM with…
Requires a tiny amount of supports for the rings and the ends. Scalable dungeon accessory. Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Barcode scanner holder -To put around a 1 inch post - Use ¼"-20 fasteners to connect the front and back
A six sided die, with the narcotics anonymous logo on the side holding the value of 6. Narcotics Anonymous logo Trademark owned by Narcotics Anonymous. This file is not licensed or endorsed by Narcotics Anonymous. Commentary: If printed…
These are button caps that can be popped onto the buttons on the Thrustmaster Sparco rally wheel R 383 mod. For some reason Thrustmaster puts these buttons in a totally random order and I got tired of trying to search for the right…
Small enclosure for the Waveshare Barcode Scanner Module Lid is snap fit, so you it can be a bit hard to take off ones first assembled. This case assumes you trigger scanning using commands as there are no physical access to the trigger…
nachbau der Pilotfigur(en) vom STARCOM M-6
🇲🇽 ¡Bienvenidos a Querétaro, México! Welcome to Querétaro, Mexico! The most famous landmark of the city of Querétaro in central Mexico is the aqueduct or arches (Los Arcos), a civil engineering work from the 1700's to bring water to the…
This is a simple Venice bridge model for the board game San Marco.
This is a remix from https://www.printables.com/model/269757-stream-deck-marco-keyboard I modified the main body to fit a raspberry pi pico I also added tabs that you can melt with soldering iron to fix the Rasberry Pi Pico in place Print…
10 mm and 12 mm Version available, 10 mm should fit mosts Seats. Mirror the parts in the slicer for the right side. Additional parts needed: 18x Screw M3 DIN912 16 mm for 10mm Version, 18 mm for 12 mm Version 18x Nut M3 DIN934
I developed this rearcover by scanning-measuring. Just because the original one start to develop some cracks after some time. Unfortunately, installing this rearcover you will lose the NFC antenna, which is glued on the original…
A modification of the original rearcover. This one has increased thickness, and will lay flat on the table, whithout the cameras sticking out at the back. This one will print in place, and no gluing is required.
es un barco de piscina y si lo pones a imprimir a 270 le quedara un acabado con pelos pero si le dejas los de las ventanas parecerá que tiene ventanas de cristal
This is supposed to replace the included 3 in 1 filter in the QIDI Q2. The stock filter is really restrictive and is not sealed against the walls very well, so basically nothing goes through the filter, and the fan doesn't do much. This…
Remixed the awesome “Refillable Charcoal Filter for BambuLab X1” form CNC-Kitchen because i wanted to use a little HEPA-Filter + activated charcoal. Therefore added a inlay which sits on the HEPA-Filter so that i can fill the rest of the…
After upgrading my SR-P Lite pedals with a load cell I wasn't happy with how they felt with their smooth plates and shallow angle. I found some decent looking and priced pedals on Amazon and created adapters for mounting them in a more…
Marco de silueta del personaje Gojo Saturo del anime Jujutsu Kaisen Puedes poner el color de la cartulina que quieras en la parte de atrás, yo elegí roja. Imprimir en el tamaño que quieras, yo lo escalé 700% y quedó de 15cm de alto con…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…