Star Wars BD-1 Droid Kit Card 1.0
NOTE: The new version linked below has much improved clips which are less visible than this version. NEW IMPROVED VERSION AVAILABLE HERE!!…
- Downloads
- 50,329
- Likes
- 12,788
- Rating
- 4.84
11,611 models
NOTE: The new version linked below has much improved clips which are less visible than this version. NEW IMPROVED VERSION AVAILABLE HERE!!…
Made possible by my amazing Patreon supporters! If you like my work and want more models you can support me in Patreon Darth Vader is a fictional character in the Star Wars franchise. The character is the primary antagonist in the…
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.16-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
Replica of a T65 X-Wing Starfighter at 1:270 scale. Dimensions Length Width Height 1:270 scale 47mm 42mm 18mm The standard version is “t65_x_wing_print-in-place.stl”. The wings are print-in-place and can move ~30°. They are printed at…
Millennium Falcon Scale 1:500
A lamp with a lithopane of the deathstar from starwars This is a remix of the "Designer lithophane moon lamp", it use the same stand or adapter. Print instructions Deathstar Infill: 100 % or solid 4-5 perimeters Layer: 0,2 mm Supports:…
This is latest model I have created. This detailed AT-AT from Star Wars has 15 points of articulation and show cases the interior of the machine. It consists of almost 70 parts and can be assembled without glue. The head and body had a M5…
Rush hour rules are easy. Clear the way for the red car to be able to leave the parking lot. Cars can move only forward/backward, no lifting the cars! Printing: Depending on the challenge difficulty, you'll need to print up to 4 trucks…
A cute cat ears headband. Might be quite tight for bigger heads, but you can heat it up slightly with a hairdryer and pull the legs appart to reduce pressure.
Stormtooper First Order The Force Aweakens helm weareble the 3mf files are prepared for multicolorprint the holder for the helmet inlays can be deleted in prusaslicer or windows 3d builder same for the speakermounts for the background…
Print Settings: Printer:Any Rafts:No Supports:Yes Filament brand:Any (my Aurapol) Filament color:Any Brown Filament material:PLA Notes: 0.2 mm layer 0.4mm nozzle 3 perimeter 0% infill 1mm retraction 0.4 Z-hop 50 perimeters speed 215C temp…
This head part with rabbit ears like Briareos, Chappie. Print settings: Filament: PETG, PLA Layer height: 0.15mm Supports: no Perimeters: 2 My other head parts: Dummy 13 Head Collection
Version Two of my reimagined spool winder. Les Kaye's model is really nice, but as I mentioned in my previous remix I ran into several issues (some mechanical and some cosmetic) that I felt could be improved, hence my Reimagined Spool…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
I decided to try it without support and it worked. I chose the brim around the legs for a better feel. I haven't tried it without it. In order to print successfully, it is important to have a well-aligned bed, a lower hotend temperature…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (paint-on supports) Scale it as you like :)
Pony ears and unicorn horn for My Little Pony or Unicorn costume. Slides over a headband to sit securely on your head. Designed to fit these headbands: Girls' 8pk Woven Tinsel Headband - Cat & Jack Printing PLA is fine for these parts.…
Star Wars Outdoor Data Panel Entrance (Switch Plate) Find your decorative add ons by JG here: Star Wars Outdoor Data Panel Entrance (Switch Plate) - "Light" Add-Ons by jg | Download free STL model | Printables.com Its a bit bigger than a…
Stay Puff Marshmallow Man.
First Star Wars helmet of mine, modeled in Blender based of Battlefront II character gallery. Cut in three parts for easy printing and assembly with bigger printer (I use Ender 3 Max). For smaller printer additional cuts have to be made.…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Once upon a time, I printed this: Cat Ears for Headphones by usernamexx - Thingiverse Today it broke :( So I designed my own to improve upon the design. What makes these better in my opinion is that it prints in a single part and is hence…
I'm a huge fan of Star Wars and the Droids from that universe. Unfortunately, I don't have enough space for full sized models, but I do have a couple of free shelves that I have slowly been filling up with Droids and Robots from various…
This is version 2 of my Starship style model rocket. As I'm learning how to design rockets I decided to overhaul the original design. I was working on the two stage version of this rocket but decided to take a step back and rework the…
Thanks Tony, yes I will continue to revisit my previous files, to improve on them where possible. Hopefully this will work for you now after these minor improvements ; ) Cheers Jace
Star Wars Droid BD - 1 Offset and solidified to print small.
iPhone mount for bike handlebar for phones with a case. Easy clip in, no obstruction of the screen, angle is adjustable. The phone is fully usable while in the mount. You will need additionally 4x M3.5 x 16 screws (ISO 7046) 4x M3.5 nuts…
Any feedback would be greatly appreciated . Last minute Easter Decor Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed Scale it as you like :)
A scissor holder for the Skådis / Skadis system. Specifically for the Fiskars 21cm scissors.
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Star Wars E11 Blaster Rifle The BlasTech Industries E-11 blaster rifle , also referred to as the E-11 BlasTech Standard Imperial Sidearm , [3] the Stormtrooper Armament Blaster Rifle (BlasTech E-11) , [4] and the E-11 Military Issue…
This is the new SpaceX Starship as of 9/28/2019 with only 2 body flaps and 2 front flaps. If you enjoy my work please consider following me. I intend on updating this model from the ground up to meet the current design from SpaceX in the…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Replica of a TIE/SA bomber at 1:270 scale. Its 28.9mm long, 31.6mm wide and 19.7mm tall. For a stand/holder, its compatible with a small pin, peg and base from here . Print instructions Printed at 0.07mm layer height. Rotate by -90° along…
Hello there! Tired of your fridge running away only to be taken by some jawas and sold to the first scruffy-looking nerf-herder that comes their way? It seems like it's a problem that has plagued us for generations… or at least since…
Death Star Ornament The model comes in a big size, so you can modify it to fit your tree style or use the bottom as a bowl. It was printed in 40% and 50%, it worked great. Once the bowl print is ready I will share the results. There is a…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint in support, use .3mf file)
Scooby Doo Mystery Machine : Crash Derby Cars
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Replica of the TIE/d Defender from Star Wars. It comes in two versions. The canon version is based on its depiction in Rebels, the other version is based on its (most common) depiction in Legends. The only difference between the canon and…
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed No Brim needed Scale it as you like :)
Remixed and combined a keycap with Star Wars Figures. I have made a FULL-BODY and a HEAD-ONLY versions. Choose what you like. Print Instructions: 0.1mm height 15% infill Supports are recommended Please share\like\add a make if you liked!
Print all files. I added different groups so they can be printed in different colors. For assembly instructions please watch this short:
About MK1 Starhawks The Starhawk is the crown jewel of the New Republic Navy. Constructed from disassembled Star Destroyers, Starhawks exceed every standard of their time and can defeat Imperial Star Destroyers with ease. The MK1 Starhawk…
Beskar Ingot: Mandalorian: Star Wars Print standing upright for best details. Textured on all sides.
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint in support, use .3mf file) Scale it as you like :)
B2EMO : Andor : Star Wars Droid. This has been available for a few years now -→ buried as an add on option in another model of mine. Hilarious. I spent 20 minutes looking for it thinking that It was posted as a stand-alone. Nope.
Es gibt eine vollständig überarbeitete neue Version: Gewürzregal als Rondel für Gewürzgläser von Ankerkraut. Es passen 6 Gläser auf jede Ebene, die Anzahl der Etagen kann beliebig zwischen 1 und 4 gewählt werden. Natürlich lassen sich…
star wars coasters including rebel, empire, falcon and fett
This is a 1:144 scale model of the SpaceX's Starship upper stage! It measures 62.5mm in diameter and approx. 370mm in height! This is the “Block 2” version of the ship, featured on flights 7-9 (so far)! This ship is based on an early…
I used Meshmixer to cut out a few more spots and the nose for a multicolor print. Printing time about 21 hours with Prusa MK3S+MMU2S with PLA, 15%Infill. How I Designed This Category: Toys & Games
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (paint-on supports) Scale it as you like :)
Fan of the Millenium Falcon, I've already designed this keychain but this one include a shopping cart token . It is 6.5 mm height and 45 mm lenght. The print is in 3 parts : millenium falcon keychain token corresponding to 1 euro coin to…
This is a model of the New Republic Defender-class Cruiser which appeared in the show Star Wars: Ahsoka. One ship of this type was called Vesper . Dimensions Length Width Height 99.6mm 19.5mm 16.4mm The scale is 10,000. Included is a…
Link to Version 2 of this Rocket: Starship Style Model Rocket v2 This is a printable Starship model rocket designed for use with Estes 1/8" rod launch pads, and Estes C6-3 motors. This rocket is a single stage version of Starship, the…
These small easy to print bookmarks are the perfect gift for the Star Wars reader in your life. They are also a great way to use up the end of a spool since they take less than half a meter of filament each. A card is included for gifting…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Star Wars Rebels Little Green Army Men/Women Set. Yoda Added (1/22/2026) single figure not saved on plate or part of gcode. (Print Separate) You can find the Empire Set Below in MyClub I have uploaded all the individual pieces as .obj…
Star Wars Data Panel and Light Switch Plate. Few files here. Make sure you get the right ones.
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 45° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
These knobs are inspired by real control knobs on Marshall guitar amps . Come in 2 sizes: regular size and 200% size. They have 3.5mm diameter blind hole for M4 bolt or 4mm screw. But please be prepared to use drill, because these small…
Love the logo design created by 86era and created a 3d printable file for it.
I put 100%infill for the best strength.
The Onyx Cinder appeared in Star Wars: Skeleton Crew. This model includes both version of the ship - the sleek republic emissary ship and the armored pirate cruiser. The wings and turrets are movable. Comes with an articulated stand. The…
The most meticulously organized Lego Star Wars collection A complete list of 55 Star wars factions available to download: At Attin Black Sun Bondsman's Guild/Bounty Hunters Churches of the Force CIS Separatists Clan Djarin Clan Fett…
Marksman-H Training Remote from Star Wars A New Hope. .obj file is an uncut high poly version. .3mf files slice the orb in half and add connectors for easy printing and assembly. gcode – see .3mf + includes organic supports. Christmas…
Stackable Print-in-place planetary gears with two different sized links. Stack and connect the sun and planet gears to each other in any way you like. Depending on your printer's tolerances, the gears might run loose or tight. As a guide,…
For best result I recommend 1 perimeter and 0.2 layer height with variable height around the text, so after color change there are at least two new layers. Also is good to use slow speed for perimeters to make text sharp.
This is a replacement detent arm for Ford F-150 trucks built from 2009-2014 that shift gears using a floor shifter / console shifter. The original Ford part is very fragile and can easily break when the gear shift assembly is being…
Kids have too many Pixar Cars and nowhere to put them? You have tried printing out one of the Hotwheel Garages on printables, but you can't find one that fits? Well, look no further! (ok, maybe look a bit further, but you will be back!!!)…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
“The Vectors were as minimally designed as a starship could be. Little shielding, almost no weaponry, very little computer assistance. The Jedi were the shielding, the weaponry, the minds that calculated what the vessel could achieve and…
The Ataraxia “the Ataraxia, the one large starship under direct control of the Jedi Order. It was a beautiful ship, designed to subtly evoke the Order’s symbol with its hull and sweeping, curved wings accented in white and gold. While the…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
STAR WARS Death Star knob. diameter 100mm - easy to scale.
A set of bevel gears where the pinions have half the teeth of the ring gear. This results in a 0.5 reduction in angular velocity from the drive gear to the free gear. The holes are designed for 8mm diameter shafts, and the free gear sits…
Any feedback would be greatly appreciated . Add a frame so looks better Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) No Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Starship shaped valve cap for Schrader and Presta valve types
Très jolie porte clés d'un stormtrooper Epaisseur max 5mm Epaisseur min 3.5mm Changement de couleur déjà configuré dans prusa slicer si vous prenez le gcode Imprimer avec un remplissage maximum pour qu'il puisse durer dans le temps.
A Star Wars Goblet or a Dire Wolf Dagger. Take your pick. or print both.
Star Wars Lightsaber Pens Lightsaber pens with different hilts (Luke Skywalker, Darth Vader). The pens each consist of a hilt and the light blade. The two parts only have to be plugged together after printing. The standard refill of a BIC…
This is my model of TARS from the movie Interstellar. TARS body consist of 4 legs, this model uses magnets to form joints and keep everything together. The magnetic joints slides along the full leg length which makes for a very flexible…
Coat hangers for cars that lack built in ones. These are placed over the hand holds above the back doors and secured with a zip tie. As every car and zip tie is different, parametric FreeCAD models are attached where you can edit the…
Polar bears are enjoying winter!! Print with supports. Thank you.
Any feedback would be greatly appreciated . Add a frame so looks better Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Spare part for designed for Marshall's Adventure city fire truck, but probably will work for other Marshalls truck as well. Some of Chase's trucks has similar devices so i included one for them too. I have printed it split in a half using…
I Remixed The Model for faster print less trash and user without MMU or any other Multicolor Setup
Star Wars Chopper: Thick Mini Version. Added an even thicker version (2/11/2025) Aptly nammed “Chopperthick.***” Small parts should be more stable. Thanks Ben for the feedback!
Info: glasses temples bent more behind ear than https://www.printables.com/model/205857-fun-nerd-glasses-with-interchangable-lenses-choose so glasses are more safely positioned for usage with :…
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Starlight Beacon was a republic space station constructed 232 BBY (that's 232 years before the events of A New Hope ). "[…] the huge waystation was built to serve many purposes: a Republic embassy that could also serve as a fortress if…