Search results: batteries

Sort order

858 models

P
PrintablesCAD-Guy

Customizable & stackable beer crate for all types of batteries

Customizable and now also stackable beer crate for all types of batteries: The AA-crate can hold 12 Batteries The AAA-crate can hold 20 Batteries The 9V-crate can hold 5 Batteries The 18650-crate can hold 6 Batteries but is 18mm higher…

Downloads
98,185
Likes
23,524
Rating
4.92
P
PrintablesES_Models

Drawer Battery Box AA & AAA + storage for empty batteries

!! ATTENTION You can't scale the model as the battery size needs to be kept. I would suggest to do min. 4 top layers as I only used 2 which definitely is not enough as you can see on the pictures. For the infill I did 8% Grid. You can go…

Downloads
768
Likes
121
Rating
5

1S LiPo Case - Battery Case for 450/550 mAh batteries

My daily use 1s LiPo battery case. Very lightweight at only ~35g per case. It fits any pocket. I can keep track of used and unused Lipos by taking new ones from left to right. It does fit the charger/Lipo-checker from BetaFPV. 450 and 550…

Downloads
640
Likes
66
Rating
5

Battery box for three 1.5V AA batteries in series connection

EN: Box for three 1.5V AA batteries in series connection. Print without supports. The electrical part needs: - 3 pc anode battery contact AA/AAA type 228 (12x12x0.3 mm) - 3 pc cathode battery contact AA/AAA type 228 (12x12x0.3 mm) Simply…

Downloads
493
Likes
195
Rating
5
P
PrintablesPatrik

Gridfinity bins for CR2032 batteries

Gridfinity battery bins for CR2032-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 8 batteries. A 1x2x4 bin that fits 16 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…

Downloads
469
Likes
44
Rating
5
P
PrintablesScottmi

AA Battery Box for four AA Batteries

Here is a durable case for storing 4 AA batteries. Friction fit lid holds batteries safe and secure in a gear bag, backpack, or wherever you choose to stash it. See my designs for additional AA, AAA, and C battery boxes. This print is in…

Downloads
356
Likes
37
Rating
4
P
PrintablesÖE

Compact case for three AAA batteries

This compact case for three AAA batteries can be printed using only two meters of filament. Prints without support. You can print both the base and the lid as one print, but if you prefer (for example to use different colors) you can…

Downloads
228
Likes
51
Rating
5
P
PrintablesPatrik

Gridfinity bin for AA and/or C batteries

A compact stackable Gridfinity 2x2x9 with two partitions, each partition fits 20 AA batteries or 6 C batteries. It is not ideal for C batteries as the batteries can be hard get when the partition is full. The base box is generated with…

Downloads
178
Likes
21
Rating
0
P
Printablesbenoitmeunier

Over-Engineered BOYA Lavalier Microphone & Batteries Holder

Boya BY-M1 might be the perfect starter microphone, but the chord is much longer than I’ll ever need. And if you have one, you know you need to carry extra batteries. So, I over engineer with this #3dprint wrap where the mic and the audio…

Downloads
139
Likes
28
Rating
5
P
PrintablesCoolBlackCat

Battery Holder on DIN Rail with drawer for used batteries

My remix includes a drawer for used batteries and is designed to be mounted on a DIN Rail. Fits AA and AAA batteries.

Downloads
108
Likes
15
Rating
0
P
PrintablesLinuTec

GoPro Akku SD Karten Block für GoPro Hero 8 Akkus / GoPro battery SD card block for GoPro Hero 8 batteries

GoPro Akku SD Karten Block / GoPro battery SD card block Für: 4x GoPro Hero 8 Akkus 2x SD-Karte 4x Micro SD-Karte

Downloads
107
Likes
14
Rating
5
P
Printablescomartist

Battery Organizer Tray for 111 batteries

This is a battery organizer. I wanted to organize my batteries. So I designed a battery holder to store different batteries. The battery organizer can hold 111 batteries. Works great for AA, AAA, 9V, A23, LR14, HR20, CR2430, CR2032,…

Downloads
106
Likes
12
Rating
0
P
Printablesdick

Gridfinity holder for Ring batteries

A container for Ring batteries, in the style of Definitive Collection of Battery Holders (Gridfinity, Stackable & Labelled) by xavierly (although this one is not stackable!) It holds two batteries in a 1x2 Gridfinity container. The base…

Downloads
86
Likes
5
Rating
5

AAA batteries stand

2x 15pcs AAA. Printed on PLA, speed.

Downloads
85
Likes
10
Rating
5
P
Printablestom

Sammelbox für leere Batterien/ Collection box for empty batteries

Eine einfache Box mit Deckel zum Sammeln von leeren Batterien, die später fachgerecht entsorgt werden. Abmessungen: 100x100x75 mm Translation: DeepL A simple box with a lid for collecting empty batteries, which are later disposed of…

Downloads
75
Likes
8
Rating
5
P
PrintablesMilos V.

Rugged Box for 16xCR2032 & 8xCR2025 batteries

Small remix of the Parametric Rugged Box by TheSameNameTwice (https://www.printables.com/model/56071-parametric-rugged-box) This box is designed for 16 pcs of CR2032 and 8 pcs of CR2025 batteries. Thanks for the nice design of the box.…

Downloads
70
Likes
21
Rating
0
P
PrintablesMark Makies

Battery Holder for a popular brand of power tool batteries in Australia

I have a plethora of power tools in the farm shed, workshop and office. With these, collected over many years of renovating, comes a number of battery capacities at 18V, ranging from 2 - 6 Ah, as well as numerous charges. Why not use…

Downloads
50
Likes
10
Rating
0
P
Printablesphil71994

M200 round case for 61 18650 Batteries

This is my first published model, so please be sure to leave your suggestions and comments down below so I can improve my design and learn. I was looking for a big 18650 lithium battery case, but only found small ones or ones that would…

Downloads
24
Likes
2
Rating
0
P
PrintablesEva Máčová

Elektrowaste and batteries

Simple labels in czech, german and english languages.

Downloads
11
Likes
4
Rating
0
P
Printablesdick

Gridfinity stackable holder for Ikea Braunit batteries

A stackable container for Ikea Braunit batteries in the style of Definitive Collection of Battery Holders (Gridfinity, Stackable & Labelled) by xavierly It holds two batteries in a 1x2 Gridfinity container. The base OpenSCAD model is…

Downloads
9
Likes
3
Rating
0
P
Printablesmbit

Tool for working with Pylontech LV batteries and others using the SurLok QLB connector ( Pomůcka pro práci s LV bateriemi Pylontech a ostatními používající konektor SurLok QLB)

Tool for working with Pylontech LV batteries (external charging and discharging - 2mm test probe diameter) and other batteries using the SurLok QLB connector…

Downloads
6
Likes
0
Rating
0
P
PrintablesCAD-Guy

Stackable & labeled beer crate for batteries

Stackable and now also with labels: beer crate for batterie and accumulator storage. The AA-crate can hold 12 Batteries The AAA-crate can hold 20 Batteries These crates are to 100% compatible to my original files. The Bottom is universal,…

Downloads
7,478
Likes
1,472
Rating
4.9
P
Printablesid10tapproved

Gridfinity Stackable Battery Storage for Cylindrical & 9V Batteries (AA, AAA, AAAA, C, D, CR2, CR123, MN21/A23 & 9V)

Update on Jan 25, 2026: Partial Height Bins are now available for CR2 & CR123A batteries. AA and AAA bins have also been revised to have an additional compartment. High-capacity bins have also been added. Gridfinity Stackable Storage for…

Downloads
5,998
Likes
2,314
Rating
4.97
P
Printablesfuchsr

Customizable Print-in-Place Cases for Button and Cylindrical Batteries

Print-in-place model to hold button-style or cylindrical batteries. Some example models are included, and the OpenSCAD source code is provided, for full customization. Instructions below are for button-style batteries. The version for…

Downloads
4,661
Likes
1,613
Rating
4.93
P
Printablesfns720

FIFO battery dispensers for AA/AAA/18650 batteries

I have designed these dispensers to use my batteries in first in - first out order. You can stand these up on the table, or hang up using a standard 4 mm countersank screw or attach their back to anything using glue or 3M's Command Tape…

Downloads
4,242
Likes
559
Rating
4.99
P
PrintablesCorvus

Battery Storage Tray - for AA (36x) + AAA (49x) Batteries - Drawer Organizer

Practical battery storage trays to keep your drawers clean and organized. No more loose batteries rolling around! 🟧 AA Version: Holds up to 36 batteries (approx. 104 x 94 x 23 mm) 🟧 AAA Version: Holds up to 49 batteries (approx. 93 x 80 x…

Downloads
3,995
Likes
886
Rating
4.83
P
PrintablesMilos V.

Rugged Box for 20x AA / AAA batteries

Small remix of the Parametric Rugged Box by TheSameNameTwice (https://www.printables.com/model/56071-parametric-rugged-box) This boxes are designed for 20 pieces of AA / AAA batteries. Thanks for the nice design of the box. Print Settings…

Downloads
3,489
Likes
445
Rating
4.85
P
Printablesjurij98

Milwaukee M18 Battery Holder for 4 Batteries

Milwaukee M18 Battery holder that you can use to mount 4 batteries. The initial holder design was created by https://www.printables.com/social/69337-vikgr/about . The design has space, so you can easily press the buttons on a battery to…

Downloads
2,876
Likes
281
Rating
5
P
PrintablesBrian K

Battery holder for Festool batteries

This holder will help you organize your festool batteries. Other batteries might fit, but this was designed for Festool.

Downloads
1,938
Likes
252
Rating
5
P
PrintablesPapaBravo

Battery Dispenser Box for AA and AAA batteries

Large capacity 26 x AA and 35 x AAA Note: I designed this back in Feb 2019 and it’s been on https://www.thingiverse.com/thing:3414188 since then. I added it here on printables.com in Sept 2022, but I have come across a copy of it already…

Downloads
1,572
Likes
154
Rating
4.95
P
Printablesoriddlero

Milk Crate Battery Holders for AA & AAA Batteries w/ 2-Color Printed Labels!

Okay, I'll admit, I've seen a "Beer Crate” battery box, however, I don't think I've ever seen an actual “beer crate” in real life. Hmm. Anyhow… It inspired me to create something that was infinitely more familiar to me, a “Milk Crate”…

Downloads
1,411
Likes
116
Rating
4.5
P
Printableshalfbit

Half-height beer crate for CR2032 coin cell batteries

A half height beer crate to store 14x2 (28 total) CR2032 (or thinner) coin cells. Fully compatible with the original battery beer crate design. The gluable bottom part from the original also fits. Stacking two of these half height crates…

Downloads
1,374
Likes
235
Rating
4.97
P
PrintablesSartor

Batteries holder for 18650 or 21700 lion packs (6S, 4S, 2S)

Better to print from temperature resistant filament (ABS, PETg) and without supports

Downloads
1,303
Likes
113
Rating
5

Makita 18V Battery Holder for 2 batteries.

0.4 nozzle, 0.2 layer hight and 0.6 line width for faster print speed The model are optimized, so it don't use so much plastic. if you download please give a ❤, and if you make one, post it. it’s all very much appreciated.

Downloads
1,298
Likes
89
Rating
5

Makita 18V Battery Holder for 4 Batteries

0.4 nozzle, 0.2 layer hight and 0.6 line width for faster print speed The model are optimized, so it don't use so much plastic.

Downloads
1,003
Likes
60
Rating
5

Makita 18V Battery Holder for 3 Batteries.

0.4 nozzle, 0.2 layer hight and 0.6 line width for faster print speed The model are optimized, so it don't use so much plastic. if you download please give a ❤, and if you make one, post it. it’s all very much appreciated.

Downloads
978
Likes
57
Rating
4.67
P
PrintablesKlave

Dummy C, AA and AAA batteries

When you're tired of changing batteries and want to use a USB power source instead, you can do some electronics modification or you can use these dummy batteries instead of modifying the battery powered light/game/toy ... Three alkaline…

Downloads
951
Likes
36
Rating
4.8
P
Printableskpreid

Customizable case for AA, AAA, cylindrical batteries

3D-printable storage boxes for small sets of cylindrical batteries. Designed to be leak-resistant: the body and lid have full-length overlap and there are no unnecessary openings. They are also a very snug fit so they should be secure…

Downloads
949
Likes
130
Rating
4.73
P
PrintablesTom

Batteriespender für AA und AAA

Ich habe den Batteriespender auf thingiverse gefunden. Mir hat gefallen, dass da auch ein Deckel bei war. Den Spender habe ich mit Support gedruckt. https://www.thingiverse.com/thing:4752641

Downloads
851
Likes
32
Rating
5
P
Printablesfrglez

AA-AAA Batteries rugged box

Remixed rugged box from @TheSameNameTwice to hold 8 AA and 6 AAA batteries.

Downloads
841
Likes
89
Rating
4.6
P
PrintablesEstep

Battery Cases for 4 AA or 4 AAA Batteries. With screw-caps.

If you are looking for bigger cases for 12 Batteries, you can find them here: https://www.printables.com/de/model/382489-battery-cases-for-12-aa-or-12-aaa-batteries-with-s Update 18.4.21: Added STLs for the lids without the AA/AAA Labels.…

Downloads
821
Likes
83
Rating
4.83

Battery box for two 1.5V AA batteries in series connection

EN: Box for two 1.5V AA batteries in series connection. Print without supports. The electrical part needs: - 2 pc anode battery contact AA/AAA type 228 (12x12x0.3 mm) - 2 pc cathode battery contact AA/AAA type 228 (12x12x0.3 mm) Simply…

Downloads
796
Likes
364
Rating
5
P
PrintablesJason

Adapter for 18V Bosch Power4All tool batteries

I had a need for a portable power source for another project - as I had a couple of the (green) Bosch tools made this adapter so I could repurpose the batteries and chargers. The print is in two parts. I printed mine in PLA which seems to…

Downloads
719
Likes
68
Rating
5
P
Printablesjufy111

AAA Battery Holder 1/2/3/4/6/8/10/12 batteries

A makeshift battery holder for AAA batteries, that you can wire as required. No terminals or springs are required. The design incorporates a complaint mechanism, inspire by this design. Screw holes are included to fasten it to another…

Downloads
693
Likes
63
Rating
4.8
P
PrintablesInterias

Form-fitting stackable batterie-crates with europallet for storing batteries (AA, AAA, 9V and others)

Because I liked the battery crates from https://www.printables.com/de/model/173788-customizable-stackable-beer-crate-for-all-types-of a lot but wished for a couple of modifications, I started redesigning them. My redesigne includes:…

Downloads
684
Likes
73
Rating
5
P
PrintablesOachkatzl

Box for Nikon Z Storage and Batteries

A box for your Nikon Z needs. Neatly stores 4 Nikon EN-EL 15C batteries, 4 XQD/ CF-Express B and 4 SD cards. If you want it to seal, use a piece of 1,75mm TPU filament, cut it to length and join the ends with ca glue, for example, to…

Downloads
682
Likes
92
Rating
5
P
PrintablesScottmi

AAA Battery Box for four AAA Batteries

I have devices that like to drain batteries and then suffer leakage, (and one AAA device in particular), so I like to keep the batteries outside the device. Here's a case aiming for minimal size and reduced material, while maintaining…

Downloads
679
Likes
70
Rating
4.8
P
Printablesvas__design

Milwaukee Compact Packout Organizer Insert for M12 Impact Driver & Charger, 2 Batteries & Bit Case

Insert to hold an Milwaukee M12 Impact Driver, 2 batteries (one in driver, 1 in insert), charger (with UK plug), Milwaukee hex bit case. There is additional storage underneath the charger and the impact driver which can be accessed by…

Downloads
645
Likes
148
Rating
0
P
Printablesfotrik

"Snow" Globe Christmas Lithophane with Base for AA Batteries

This is an enhancement of "Snow" Globe Christmas Lithophane from Sebastian that is a remix of "Snow" Globe Christmas Lithophane from Taylor Herrin . I made a base for 3x AA batteries and power switch that you can use to build your own LED…

Downloads
631
Likes
154
Rating
5
P
PrintablesBenBreaksThings

Gridfinity 1x3 block, storage for (8) 9v batteries

Made in TinkerCAD, no fancy fillets for rounding to accommodate any 9v standard size despite edge rounding. Tested with batteries that were wrapped in plastic and still had space to place without issue, but not too loose.

Downloads
628
Likes
61
Rating
5
P
PrintablesTinnT

Rugged Box - AA and AAA batteries

I have created two version of the Rugged Box that hold 20 AA or 20 AAA batteries. The design uses 25 mm screws and the latches are the same for both boxes. I uses inserts for the batteries as I find it more useful (if you decided that you…

Downloads
625
Likes
83
Rating
5
P
Printablesdaclasen

Print-in-Place Case for LR44 Batteries

This is a Remix of Print-in-Place, Customizable Cases for Button-type Batteries made by fuchsr that will fit 2x10 LR44 Coin-Cell Batteries. Please refer to the original model and its detailed documentation regarding Print Settings etc. :)

Downloads
619
Likes
62
Rating
4.95
P
PrintablesGraemeH

Gridfinity magnet stackable battery dispenser for Amazon Basics batteries

The original model by FruitieX was great but I found that my Amazon Basics AAA and AA batteries didn't fit so I changed the couple battery size parameters in the Fusion file to get the fit right. Posting both the inserts and the base, I'm…

Downloads
610
Likes
68
Rating
4.82
P
Printablesverdrus

Battery dispenser for AA Mignon (Batteriespender)

Battery dispenser for 17 AA mignon batteries. I was inspired by the great design from adoniram with his version of a battery holder thing:1004996 . But I had trouble with stucking batteries so I decided to design a complete new one which…

Downloads
589
Likes
87
Rating
4.7
P
PrintablesKevin

AA + AAA Batteries Storage

Printed with Prusament PETG Jet Black 0.3mm no rafts or supports required.

Downloads
544
Likes
40
Rating
5
P
PrintablesOurAngryBadger

Battery Terminal Covers for M8 LiFePO4 Batteries

Battery terminal covers for LiFePO4 batteries that typically use an M8 bolt on the battery terminals. I recently built a battery bank for my RV consisting of (3) 100ah LiFePO4 batteries I purchased on Amazon. They are great batteries,…

Downloads
539
Likes
33
Rating
4.8
P
Printablesscooter_magavin

AA battery storage box for 4 batteries

AA battery storage box for 4 batteries. Friction fit lid. No supports needed. I printed mine in pla with .2 layer and 15% infill. I did have to clean up the underside of the top slot with a knife so the lid would slide in smoother.

Downloads
538
Likes
65
Rating
5
P
PrintablesMateo Van Damme

Battery holder for 2 Canon LP-E17 batteries

I designed the fit to be perfect when printed in Prusament PETG, I haven't tried Prusament PLA or other filaments (yet). The battery type “LP-E17” is embossed on one side. On the other side the same is done in Braille.

Downloads
516
Likes
51
Rating
4.4
P
PrintablesEstep

Battery Cases for 12 AA or 12 AAA Batteries. With Screw-Caps.

Simple Cases for AA and AAA batteries. If you are looking for smaller cases for only 4 Batteries, you can find them here: https://www.printables.com/de/model/382491-battery-cases-for-4-aa-or-4-aaa-batteries-with-scr Print Settings Rafts:…

Downloads
504
Likes
59
Rating
5
P
PrintablesJR

Gridfinity Bin - AA Batteries (2x3x4)

Gridfinity bin designed to hold 28 AA batteries. Bin size is 2x3x4.

Downloads
495
Likes
43
Rating
4.6
P
PrintablesClint J.

BETAFPV Pavo Pico Frame for 2s Batteries

This is a remix of the Pavo Pico frame for 3s batteries by al-bandit (@albandit) in order to serve as a replacement for the original frame with 2s batteries. This is designed to accept threaded inserts which should be similar to the…

Downloads
487
Likes
31
Rating
5
P
PrintablesPrinterchick

battery organizer for AAA, AA, C, D and 9v batteries

battery organizer for AAA, AA, C, D and 9v batteries. I indented all of the letters so you can 'fill' them in with your color of choice if you have a color 3d printer. The photo was printed in 2 filaments with a Bambu X1 and AMS. I have…

Downloads
471
Likes
48
Rating
3.75
P
Printablesinfamous61

AA Battery Holder (4 Batteries)

AA battery holder for up to 4 batteries. Great for carrying those extra batteries. Created using Tinkercad.

Downloads
466
Likes
65
Rating
5
P
PrintablesAki

BOSCH Battery holder & Carry For 4 and 6 batteries

A holder for attaching the battery to a wall, etc. A holder that allows you to carry 4&6batteries.

Downloads
460
Likes
54
Rating
5
P
PrintablesAJ Quick

Dyson V7/V8 Battery Adapter for Ridgid / AEG Batteries

This is a remix of DysonOBI from TeachingTech. It allows a Ridgid Battery Adapter from Amazon to be affixed to the Dyson V7 or V8 vacuum. It may fit others. You will need the following: -Ridgid AEG 18V Hyper li-ion Battery DIY Dock…

Downloads
447
Likes
46
Rating
0
P
PrintablesRobC

18V batteries holder for Ryobi Link

This model allows you to hang three 18V Ryobi batteries using the Ryobi Link system. Printed at .30mm without supports. I updated the .3mf and .gcode files so that the battery sleeves are now at a 45 degree angle. Thanks @JPMakesStuff for…

Downloads
444
Likes
65
Rating
4.67
P
PrintablesYellowtech

BetaFPV AIR75 Case with 12x Batteries Lava up to 550mah

Travel Case for the BetaFPV AIR75 that holds up to 12x Lava 550mah (smaller also works) as well as spare props and more!Travel Case for the BetaFPV AIR75 that holds up to 12x Lava 550mah (smaller also works) as well as spare props, the…

Downloads
431
Likes
44
Rating
5
P
PrintablesKatie

Dummy Li-Ion batteries - 18650, 21700, 26650 & 26700 - Fast printing

This is a set of dummy batteries, on each of: 18650 with button on top (yellow) 21700 flat top (green) 26650 flat top (white) 26700 flat top (blue) I use these to make battery enclosures etc. They are safer than using real batteries,…

Downloads
409
Likes
18
Rating
5
P
PrintablesAndreas

Battery beer crate with additional cut-outs to make it easier to insert the batteries.

I just added some cut-outs to the dividers, based on a real beer crate design. This makes it easier to slide the batteries in. Thanks to CAD-Guy for the great design!

Downloads
406
Likes
46
Rating
4.92
P
PrintablesJR

Gridfinity Bin - AAA Batteries (2x2x4)

Gridfinity bin designed to hold 25 AAA batteries. Bin size is 2x2x4.

Downloads
399
Likes
33
Rating
4.5
P
Printablesverdrus

Battery dispenser for AAA Micro (Batteriespender)

Battery dispenser for 25 AAA micro batteries I was inspired by the great design from adoniram with his version of a battery holder thing:1004996 . But I had trouble with stucking batteries so I decided to design a complete new one which…

Downloads
378
Likes
67
Rating
5
P
PrintablesMax

Toller Batteriespender

Am besten mit 0,4 mm Drucken.

Downloads
375
Likes
62
Rating
4
P
Printablestearandfix

Case for 100w powerbank module with 4s2p 21700 batteries

Another powerbank case for a popular module from Aliexpress. It is designed to be printed without supports with 0.2mm layer height. Requires 2 M3x10 countersunk screws and 2 M3x12 hex head screws. The screws goes directly into plastic.…

Downloads
374
Likes
65
Rating
4.5
P
PrintablesHappyBlue

Stackable beer crate for batteries

I love the original crates (thanks @CAD-Guy ) and have a few printed out, but I didn't have any glue to fix on the base that makes them stackable, so I remixed the original to allow the crates to stack without any additional parts. This…

Downloads
374
Likes
55
Rating
5
P

Batteries 18650 holder

Batteries 18650 holder

Downloads
368
Likes
36
Rating
4.75

NO BATTERIES NEEDED - Air motor/water pump

designed this to make for air powered car balloon on short tube to demonstrate air to rotary motion hose on long tube for water pump

Downloads
366
Likes
150
Rating
5
P
PrintableslikwidPLA

Gridfinity AA Batteries holder

This is a remix of the AA battery box container adapted (by bigblacksheep) to the Gridfinity base (provided by https://www.printables.com/model/226535-gridfinity-adapters/files) If you print two of them, and place them together, you will…

Downloads
364
Likes
48
Rating
5
P
PrintablesShaked Angress

Angress charger IDF for 624 batteries מטען אנגרס

Original files https://www.printables.com/model/722498-mensch-ragli/files שימו לב מתח הסוללה הוא בין 12.6 ל 8.1 ולט לא כל המטעני הרכב מגיעים למתח נמוך , חלקם יפסיקו לעבוד בסיבות 10 וולט השתמשו בגירסה הארוכה אם יש לכם זמן ואתם רוצים לחסוך…

Downloads
356
Likes
10
Rating
0
P
PrintablesSimple3D

Case for Heltec T114 V2 Meshtastic Radio with GPS and two 3000mAh Lipo batteries

I wanted a Heltec T114 V2 meshtastic radio case that would fit with the GPS module. I didn't see any. I also wanted one that would hold two of the larger 3000mAh Lipo batteries. I made it to snap together so no hardware would be required.…

Downloads
354
Likes
47
Rating
5
P
PrintablesJamesek

Safety lid for stackable beer storage box for AA batteries

In case you accidentally knock over the storage box and the batteries would spill out. That way batteries stay firmly in the box and you don't have to collect them :) Stacking also works and the inserted lid is not intrusive at all. Tried…

Downloads
354
Likes
90
Rating
5
P
PrintablesJ majerus

M18 Battery Wall Mount - Fits all M18 batteries

Better m18 wall bracket, with more clearance on the wall. Fits all M18 batteries without an issue. Use #6 X 2" screws for best results. Also removed tang to make it easier to remove batteries from the wall.

Downloads
351
Likes
24
Rating
5
P
PrintablesWojtek

Canon LP E6 batteries holder 2 pack

I remixed rogersoh holder to have a smaller version of it Category: Camera

Downloads
347
Likes
24
Rating
5
P
Printablesdaclasen

Print-in-Place Case for CR2450 Batteries

This is a Remix of Print-in-Place, Customizable Cases for Button-type Batteries made by fuchsr that will fit 10 CR2450 Coin-Cell Batteries. Please refer to the original model and its detailed documentation regarding Print Settings etc. :)

Downloads
344
Likes
46
Rating
5

Battery box for two 1.5V AAA batteries in parallel or series connection

EN: Box for 2 battery AAA size - model is in two versions (for parallel or serial connection). Print without supports. The electrical part needs: - 2 pieces anode battery contact AA/AAA type 228 (12x12x0.3 mm) - 2 pieces cathode battery…

Downloads
342
Likes
28
Rating
0
P
PrintablesSirHair

Pre-fabs for fuchsr's "Print-in-Place, Customizable Cases for Button-type Batteries" - 25+ sizes

Researched common sizes, labelled and generated multiple boxes from fuchsr's Print-in-Place, Customizable Cases for Button-type Batteries using Queued's SCAD with a broader diameter range. (Wiki: List of battery sizes , Button_cell ).…

Downloads
335
Likes
75
Rating
5
P
PrintablesMiguel2811

Actually Stackable Batteries Beer Crate

So I decided to add some extrudes and cuts on the amazing original models made by CAD-Guy as these would slip and fall. This remix is easier to print and the extrudes allow for the crates to actually be stackable. Can be printed with 0.3…

Downloads
325
Likes
58
Rating
5
P
PrintablesCenedd

Wallmount 12v holder for Bosch, Milwaukee and Parkside batteries

Holds Bosch, Milwaukee and Parkside 12V batteries. Takes two 4x35mm screws, assuming 30mm depth wall plugs. Battery clips in for retention. It is possible to pull the battery out without pressing the release since the underside of the…

Downloads
324
Likes
36
Rating
5
P
PrintablesPatrik

Gridfinity bins for CR2450 batteries

Gridfinity battery bins for CR2450-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 5 batteries. A 1x2x4 bin that fits 10 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…

Downloads
319
Likes
21
Rating
5
P
PrintablesJeepingJohnny

Battery tray's for orgonizing your batteries.

I cut off the top and flattened the bottom. Now its a battery tray for convent battery storage. Just fill these up and put them in a drawer or wherever and grab a battery when you need it. 9v x 10 AA x 24 AAA x 50 Smaller version here.…

Downloads
318
Likes
46
Rating
4.8
P
PrintablesSimply Thomas

Fixing 21700 batteries for spot welding

Hello. My proposal for creating battery packs for the size 21700 Print quality 0.2 Material: PLA , PLA + , PETG , Infill according to your reasonin

Downloads
317
Likes
27
Rating
1
P
PrintablesMiGarro

Parkside Dual X20V Team batteries to Ferrex 40V Tool

Update 2024: Since it is impossible for me to control the printers, filaments and slicer settings of those who print my models and having been told that my model is not sturdy enough to withstand drops (it was not designed for that…

Downloads
311
Likes
33
Rating
1
P
PrintablesWerkStattWunsch

Lid/Cap/Cover for customizable & stackable beer crate for all types of batteries

A little cover for the amazing Customizable & stackable beer crate for all types of batteries by CAD-Guy. I used the material reduced bottom from Antimaterie but increased the height to get more grip inside the crate. I used the lid to…

Downloads
305
Likes
70
Rating
5
P
PrintablesN-Ender_3

Power Bank - From Vape Batteries

DIY Power bank from recycled vape batteries. I've used 5 batteries from a rechargeable vape. Each battery has a 650mAh capacity, so the total is approx 3250mAh. It charges most modern phones to above 65% from 0%. USB Charge Power Bank…

Downloads
305
Likes
97
Rating
5
P
Printablesnoniq

Advanced Battery Dispenser (AA / AAA Type Batteries)

There are 2 versions of this model: One for type AA batteries, and one for type AAA batteries. Both models are identical except for their dimensions. Both can hold up to 9 batteries of the respective type. The model is printed in two…

Downloads
300
Likes
30
Rating
5
P
Printablesscooter_magavin

AAA battery storage box for 4 batteries

AAA battery storage box for 4 batteries. Friction fit lid. No supports needed. I printed mine in pla with .2 layer and 15% infill. I did have to clean up the underside of the top slot with a knife so the lid would slide in smoother. Rev…

Downloads
300
Likes
30
Rating
4.67
P
PrintablesNoloxs

TS100 Power Adapter for Makita Batteries

A simple XT60 snap-on adapter for Makita batteries, but I only recommend using the ones with the little star marking on them, as these are the only ones with battery protection. I have an Instructable here describing the how-to:…

Downloads
297
Likes
86
Rating
5
P

Meteor 75 pro & batteries box

A box to transport you Meteor 75 pro & batteries. This keeps them safe an organised so that they are ready for use. Includes a Lid with tabs to create a good fit on-top of the box. The battery holes were designed for Betafpv 550 mAh 1s…

Downloads
294
Likes
28
Rating
4.5
P
PrintablesHans

Mini Lab Bench Power Supply (DPS3003) Powered by Einhell Batteries or DC Source

This is my mini lab bench power supply with a DPS3003 (or compatible DPSs) as main component. It features two modes: powered by battery or powered by an external DC source. This way it is very flexible to use. You'll need: 3 position…

Downloads
294
Likes
116
Rating
5
P
PrintablesSimply Thomas

Fixing 18650 batteries for spot welding

Hello. My proposal for creating battery packs for the size 18650 Print quality 0.2 Material: PLA , PLA + , PETG , ASA Support as needed Infill according to your reasonin

Downloads
291
Likes
22
Rating
5