Battery Organizer Tray for 111 batteries
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€12.23 – €14.94 net (excluding VAT)
For file: Battery_Holder_111_batteries_0.3mm_PETG_MK3S_11h59m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €13.58 excluding VAT (range midpoint).
- Weight reported by the author
- 218 g
- Print time reported by the author
- 11.98 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Works great for AA, AAA, 9V, A23, LR14, HR20, CR2430, CR2032, CR2025 and CR2016 coin cells
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 106
- Makes
- 0
- Views
- 447
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
This is a battery organizer. I wanted to organize my batteries. So I designed a battery holder to store different batteries. The battery organizer can hold 111 batteries. Works great for AA, AAA, 9V, A23, LR14, HR20, CR2430, CR2032, CR2025 and CR2016 coin cells.
The organizer is designed for the following batteries:
- 26x AA battery
- 50x AAA battery
- 2x 9V battery
- 2x HR20
- 3x LR14
- 11x CR2032, CR2025, CR2016
- 2x CR2430
- 8x LR44
- 2x A23
- and many more
To reduce the printing time, I started printing in 0.3 draft mode. PETG was used as filament. You can see the result in draft mode in the photos.
Print time: 11h 59m (0.3mm draft printed with PETG, MK3S)
ČEŠTINA
Jedná se o organizér baterií. Chtěl jsem si uspořádat baterie. Navrhl jsem tedy držák baterií pro uložení různých baterií. Organizér baterií pojme 111 baterií. Funguje skvěle pro mince AA, AAA, 9V, A23, LR14, HR20, CR2430, CR2032, CR2025 a CR2016.
Organizér je určen pro následující baterie:
26x AA baterie
50x AAA baterie
2x 9V baterie
2x HR20
3x LR14
11x CR2032, CR2025, CR2016
2x CR2430
8x LR44
2x A23
a mnoho dalších
Abych zkrátil dobu tisku, začal jsem tisknout v režimu konceptu 0,3. PETG byl použit jako vlákno. Výsledek v režimu konceptu vidíte na fotkách.
Doba tisku: 11h 59m (0,3mm koncept tištěný pomocí PETG, MK3S)