383 models
Also fits at least older IKEA desks with table tops of the same thickness (~19mm) Added a blunt version of the hook that prints without supports. Works fine with clothes hangers.
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
If you're like me and annoyed that the BILLY bookcase (and extension unit) is 4mm too narrow to fit exactly three full-width modular houses side-by-side… be frustrated no more! This is a set of parts forming a 5mm extension to widen the…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for PETGSource material: PET
In search of an efficient filament storage solution with limited space, I discovered the potential of the IKEA Billy Bookcase. This guide outlines how to transform it into a filament holder using readily available materials and…
A remix of the original "Billy The Doll From Saw/Jigsaw" head, to make a Halloween mask. I hollowed the head, cut the back of the head off, and put holes in the eyes. I printed at 115% to fit my face. This was also max size to fit on the…
Here is the model for Billy Bear. Billy is a good but Spooky Friend of Barry, and is REALY into Scary Movies. And like his friend he seems to just want to be your friend too, do you have space for Billy? maybe he can keep Barry Company. I…
I needed to make these for my friend for Christmas, but the ones here on thingiverse weren't very well made. I took took inspiration from Thain's billy clubs, and remade these from scratch using fusion360. Enjoy! Category: Props
I wanted to spruce up my bookcase doors with some nicer doorknobs, so I whipped up two different versions in Fusion. Screws in easily and grabs the scew well. I would recomend to print these with atleast 4 walls, so make sure the inside…
Made these when I couldn't find strong enough manga/book risers for my use in my IKEA BILLY bookcase. I wanted to have an entire row across the back risen high enough room to read the titles (6cm high). I also wanted rows across the…
A small piece to cover the shelf holes on the IKEA Billy bookcase. Should fit nicelly, not too loose but also not super tight so it can be removed if needed. It also has a small edge to help when removing it. Print with brim to make sure…
This is a remix of the Daredevil (Netflix) Billy Clubs. This remix has a holo tube on the inside designed to contain a wire like seen in some versions of the billy clubs. When opened, the wire is able to slide in and out of the tube. The…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint
This is my version for a Manga Riser in my Billy Ikea. Print in PLA / 25%, and need 4 of them to fill one board.
Green Day : Billy Joe Armstrong
Are you tired of all those open mounting holes in your IKEA "Billy" furniture? Don't look further - you've reached your destination :-D Simple plugs to print in the color of your choice to easily cover the holes of your IKEA "Billy"…
I designed this clamp for the Ikea Billy bookshelves to display my books and manga. I have a couple of Billys in my house and found that the newer ones shelves are slightly thicker than the older ones, so I made two versions. The model…
Mounting for two rods to the Ikea billy wardrobe, ideal for storing filament spools. Designed for maximum capacity - this mount does not interfere with the spools either in width (they can be from the wall to the wall of the cabinet) or…
a like is not a crime ;) Enjoy the Teenage Mutant Ninja Turtles Sewer Diorama / Playset it fits perfect for the IKEA Billy shelves its 760mm lenght 260mm deep 270mm high use 3x10 screws for floor /walls and 3x15 for walls /walls have fun
All the bookshelves are scaled 1:25, the tall ones have 7 fixed shelves and the low ones have 2 shelves. The dimensions should be fairly accurate and is based on the dimensions given by IKEA on their Swedish website together with my own…
Brelok do kluczy w kształcie koziołka (z herbu Lublina). Wymiary modelu: ok. 30 x 37 x 2 mm. Czas druku 15 min. Drukarka Ender 5 Pro. Filament PLA.
IKEA Billy Shelf - Gaming Labels Inspired by fedaykyn 's design, I've created additional labels to reflect and complete my own videogame collection. :-) Systems Nintendo Nintendo 3DS Nintendo Entertainment System Nintendo GameBoy Nintendo…
Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…
This is my sollution for a Billy that slants into the room and want not to stay on the wall…i could screw it on with an angle…but…you know, i'm lazy and this works totally fine for me. But keep in mind - this is not a strong sollution…
This is a replacement shelf pin/peg for the latest version of the Billy bookcase from IKEA. We recently moved and lost the pegs for ours. With the IKEA being a bit of a drive, I just printed out a new set and called it good. The plastic…
I really liked the filabilly system but wanted to make it more universal so people outside of the US can look for it without having to hunt for ½" pipes. I decided to go with a simpler jig, the original is nice but I felt it was…
This modular system allows you to display your games and media front facing with laser alignment along the Ikea 31" Billy Bookcase. The alignment edge is recessed approximately 10mm from the front edge of the bookcase, giving you that…
I put four of IKEA's “Billy” bookshelves in a room and found them to stand slightly unevenly, probably due to the uneven floor. Like every problem I encounter nowadays, there was a way to 3D print a solution! This little bracket did the…
I got an Ikea BILLY bookshelf from a friend but he told me that he could not find the supporting pins for the shelf board (should be part number: 131372). So I made these parts with some quick dimensioning. They fit quite nicely and have…
A simple to print yet very sturdy and reliable cable clip for cable management. Designed for Ikea Besta, Billy, and other 18mm wide, or wider, furniture, boards, etc. You can still add and remove everything without catching on the cable…
My two Billy bookcases, annoyingly, would not stay together so I made a simple bracket to hold them to each other. The brackets stay in place through friction and the fit can be made tighter by adding folded paper behind the bracket. You…
My wife want's to add some boards to the Ikea Billy. So the options where to drive to Ikea, order some nipples or just print some. Here is the result ;) Attention: Since Ikea changes the hole diameter, this will fit the newest Ikea…
Tired of only seeing the spines of your favorite manga? So was I! That's why I designed this simple and sleek bookshelf bracket to showcase the beautiful cover art of your collection. Now you can proudly display your favorite volumes in…
Billy is the most mischievous and evil worm of the Gang, even more than Donald! Better to stay away from him. The Gang of Worms is a series of toys for boys and girls, quick and easy to print, suitable for gifts and to brighten up your…
As I'm starting to have quite a few filament spools I've decided to find a better storage than stacking them on the floor. I wanted something simple and cheep, so I bough a quite famous bookshelf, 4 times 2.5m 20mm metallic tubing and a…
Stop wasting valuable bookshelf real estate ! Those half-shelves will let you put twice as many (pocket-sized) books on your shelves. They have been made for Ikea Billy bookcases, 80 cm or 40 cm wide (or anything with a 36 or 76 cm…
Enjoy the Teenage Mutant Ninja Turtles Sewer Diorama / Playset it fits perfect for the IKEA Billy shelves its 360mm lenght 260mm deep 270mm high use 3x10 screws for floor /walls and 3x15 for walls /walls have fun
this is just a holster for dare devils Billy clubs
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Summary Conceal unused shelf holes in cabinets and bookcases for a cleaner, more refined look – particularly effective in open furniture without doors. Compatibility Tested on IKEA furniture as well as other brands, ensuring compatibility…
If you found this helpful, please consider supporting me! Need a custom print? Contact me on Instagram @printsbymxtc Want to support my work? Donate here!
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
modeled this up at popular request. takes a 1/2 inch rod for support and assembly. Category: Props
Summary Make perfect use of the shelf holes in your furniture body and create new possibilities! – particularly effective in open furniture without doors. Compatibility Tested on IKEA furniture as well as other brands, ensuring…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
We have plenty of shelves and lots of space, but we’re a household full of book lovers. Slowly but surely, we’re running out of space in a sustainable way, and despite having many eBooks, new physical books keep joining our collection.…
This is a single print model based on the IKEA BILLY bookcase in 1:12 scale. Since this model is printed all at once, the shelves are unable to be moved once printed. This print requires no supports when printed back down. If using white…
This miniature model closely resembles an Ikea Billy bookshelf, complete with a simple design. It’s perfect for architectural models, dollhouse displays, or any creative project that requires a scaled-down bookshelf. Print on the back for…
There is 3 different hooks : a regular one that can be put on any 29mm thick shelf and two special hooks that are made to be put on the sides of a Billy shelf . Made for the Billy bookshelf but will probably work on any ikea furniture.…
Whatever you do DO NOT put a small firecracker (or explosives) in the break action chamber on the back. (BEWARE OF POWDER BURNS)
Spice box modeled for the shelf in Ikea Billy bookcase.
Rockabilly cat in a cartoon styled Hot Rod, a 3D artwork by Mehdals I would probably tilt it back 45 degrees and print it for best results on the face of the character.
A simple template to add more holes for shelfs in your IKEA-Billy. Probably also useable for other IKEA-cases and cabinets. The (center to center) distance between the guiding pins and holes is 32 mm. The diameter of the pins is 5 mm.…
V3 increases structural integrity but uses more filament and allows for 5 games to be stored. Printer: Bambu Lab P1P Filament: Overture PLA+ White
Here is a short demo of the street glider https://vimeo.com/659992058 Note: You will need a printer with at least a print area of 290mm x 280mm in X and Y. This is the bare minimum size. Perhaps I will design some split models in the…
Book riser with hexagonal pattern. Originally designed for 60cm Besta or 40cm Billy shelves. Printing instructions: 2 Perimeters 10% Infill 0.20mm layer hight or higher Even with the weight of a lot of books 10%infill is plenty to provide…
A cat based Wallhook my brother made, using the tools I made available here: https://www.prusaprinters.org/prints/149000-dwayne-the-wall-hook-johnson-wall-hook-making-syst And a the cat head made by DarkPrinc…
i create a hook for the Ikea Billy Regal Print instructions Infill between 10-15% You need no support for printing
Ikea Billy Filament Holder Shelf Suit 19mm / 3/4" rods - curtain rods, aluminium/steel tube or pipe, wood dowel etc Requires 8x 3.5mm/6G x 16-18mm countersunk screws per shelf
Modeled after: https://www.printables.com/model/759616-ikea-billy-shelf-pin-34mm with increased pin size going into the shelf itself for a stronger fit. I would maybe recommend getting the original metal ones for the strongest hold, but…
Remix of the main bracket from the Filabilly shelf, with some changes to print at an angle for more strength
Designed to fit standard 124mm x 10mm wide jewel cases.
if you have older style Billy bookcases , the new oxberg glass door dont fit. this template helps setout new holes which you need to drill holes ctrs from top of door ( mark on bookcase) 95mm, 1055mm, 1822mm
A small, filament efficient cover to make the adjustable holes in the IKEA Billy bookcase blend in better.
After the bookcase was assembled, some billy shelves remained. I made a nice little cap to use it as a standalone shelf. I used the following model as a console: https://www.thingiverse.com/thing:4835169
I have two Billys next to each other, screwed together. This is what I've used for the middle section
Da ich in der Werkstatt für ein Billy-Regal noch zusätzliche Löcher brauchte, habe ich diese Bohrhilfe gemacht. Bohrergröße 5mm. Die großen Löcher sind nur um Material zu sparen. In der Fusion360-Datei sind die Abhängigkeiten so gewählt,…
New pins designed to replace the ones we lost
A new 3D figurine generated by AI, a Chibi Billy (Saw Puppet). I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the…
Small accessory-hook for the pin-holes in IKEA's famous Billy.
NOTE: This model was designed for - and only test-printed on - my 4K SLA printer.
2/25 update: added a new bracket for 5/8 inch rod =============== This is my shelf bracket remix from macmanluke's work to use existing peg holes in Billy bookcase for 1/2 inch rods with topside open so it can hold 5 spools easily for 15…
We recently purchased a Billy bookshelf from IKEA, and added Oxberg doors to create a wonderful board game cabinet. We also have a toddler. Hence the IKEA Oxberg Latch The rubber bands we were using before worked, but were tacky. Now we…
Super simple bracket to keep your toddlers away from the Billy bookshelf covered with doors. Easily print without support with PLA.
Just a real size model of IKEA BILLY that i created to make wall connection so needed it to model after. Model from measurement of IKEA+real life measurement, I did not add the odd variant of shelf holes but the basic ones should be…
you can print this in PETG, you need 2 of them screw them in the both upper corner, on the backside improve the stability of a Ikea Billy you can use 4mm wood screws
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … I needed labels for the filaments stored in Billy shelves.…
This is a drawer for the Ikea Gnedby or Billy CD Rack with a inner width of 160mm, it has separated guiding rails with an endstop that the drawer doesnt fall out of the rack. It fits 9 gridfinity boxes and is very useful for sorting stuff…
A stable riser for manga that can be printed in parts. It raises the back row by 10 cm so that the titles are still easy to read. You need 5 plates, 4 side foots, and 8 middle foots. No other materials are required. I printed it out of…
If you print this on the large flat you can do it without and support, it should end up being stronger in this orientation as well. I used PETG at 100% infill. I would suggest something at least this strong, or stronger. I can't speak to…
These are wedges that can be used to level an IKEA "Billy" bookshelf on uneven floors. This is useful when you for example have an older floor that is sloping away from the wall, causing the bookshelf to also tilt outwards. You use them…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Squawkabilly, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other…
If you need to pass wires through shelves in a billy bookshelf you can cut a corner off, but it might often have unaesthetic edges. Use this little item to make it look better. The stl here suits a 20mm sided triangle on a 19mm thick…
Printed in petg, recommended A hook designed for a friend for hanging art on an ikea billy bookcase and some other ikea bookcases. Apparently, its trendy! Who knew!? I'd suggest placing a large book on the clip itself to keep things from…
This Billy Butcherson tombstone is a replica of the movie original tombstone in the Hocus Pocus movie. If you are looking to be able to make the tombstone with a CNC Router in High Density Polystyrene (R-10 Insulation foam board), you can…
J’ai conçu un support 3D spécialement adapté aux étagères Billy de chez IKEA (épaisseur : 19 mm). Ce support permet de mettre en avant une jaquette (PC, PS2, Wii, DVD) ou un manga en l’exposant directement sur la tranche de l’étagère,…
ROCKABILLY GIRL - WALL ART
IKEA Billy bookcases tend to stand a bit askew next to each other, which can be pretty jarring. This connector goes on the top and holds them together. Make sure they're still sitting securely on the floor! Usage : Put the connector on.…
Printed best for me with 100% infill and 0.12mm layer height on my Ender 3 Pro.
Mighty Morphin Power Rangers - Blue Ranger Billy - 1993 3D printable model.
Rockabilly Tanzpaar Rockabilly dance couple
I had wasted space inside my cabinet and wanted to use only half width. These were made with 4mm thick walls which add 8mm to both the length and width, but it'll still fit inside the cabinet (even if by increasing the door clearance.…
I designed this to hold the Blu-rays / DVD in the right place of my IKEA Billy 40 CM. I splitted it to nearly 19 cm so there is small gap and they easily fit in the shelf. Have fun with it
We have a some Billy bookcases set up as lockers and I was looking for a way to hang keys in them without damaging the bookcase. A didn't see anything like I was looking for so came up with this quick model. There are 3 different…
Get ready to rock your shelf with this swaggering Rockabilly Gnome! Sporting a sculpted pompadour, studded headband, and classic leather jacket, he stands beside a retro jukebox—hand casually resting on its arched top. His confident…
A simple hook for the IKEA Billy + one version with meshmixer support. Category: Organization
I created left and right side brackets so there is a small gap at the front in case you'd like to add an air tight sealing to the doors. Length is 260 mm so you can print both brackets at once on a Bambu Lab printer for example. Add some…
A simple spool storage system for the Ikea Billy The brackets can be screwed into the already existing holes with 3.5mm countersunk screws. Each level requires 2 of the two holders and 2 8mm thick rods of length 36cm. I suggest to mount…
Model of Grim, from the series Grim Adventures of billy and Mandy. Printed 15% infill + Tree supports. Care with arms and staff when removing supports. This is the first time I've taken one of my blender art and turned it into a 3d print…
Cache-charnières personnalisé pour étagères IKEA BILLY Protégez vos livres et personnalisez vos étagères BILLY ! Matériau : PLA (écologique et durable) Compatibilité : Toutes les imprimantes 3D FDM Fonction : Cache les charnières…
