11,874 models
Usually when printing objects they talk about walls and filling, but I made a structure without walls, without filling, and also without a bottom and a cover. There are only bridges that connect and lean on each other. The peculiarity of…
Print approx. €4.90–€5.99 excl. taxPreliminary estimate for one variant
Intro A super-mini tool designed to hold standard hex bits with exceptional grip and control. Its compact size makes it perfect for tight spaces, keychains, or everyday carry in your toolbox — yet it still offers a confident, textured…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
Screw claw to hold screws in front of the screwdriver. Allows easy and one-handed screwing without the screw falling off the bit. You can support me with a coffee: https://www.buymeacoffee.com/maxwxyz Place the screw claw on the front of…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
This head part with rabbit ears like Briareos, Chappie. Print settings: Filament: PETG, PLA Layer height: 0.15mm Supports: no Perimeters: 2 My other head parts: Dummy 13 Head Collection
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
This is a holder for the extra bits that can be ordered for the LTT screwdriver. 12, 24, 36, 48 and 60 bit versions. The outer case is a single print with a print in place hinge. The inner bit holder part is meant to be print with…
Print approx. €5.87–€7.18 excl. taxPreliminary estimate for one variant
Use these 1250 names and words on your Crocs to customize them (jibbitz)! If a name is missing or you need other words, you can easily create the STL using the included OpenSCAD file (See “Customizing” below) Or use the online customizer…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Intro This is a very compact, low-profile 90 degrees right-angle bit holder for standard hex bits . It is designed to reach screws where a normal screwdriver or bit holder simply does not fit. The special designed variable bit fitting…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €2.81–€3.43 excl. taxPreliminary estimate for one variant
[EN] Simple keyring with ratchet function for bits printable in one piece without gluing or inserting additional parts. Serves as a nice demonstration print, or a quick to make (approx 45min) gift. For a successful print, it is advisable…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
Holder for a total of 23 drill bits with a size from 1 mm to 12 mm in 0.5 mm steps. The holder can be mounted on a wall with 2 countersunk screws. The drill bits holder is printed in 3 parts: holder, label and ruler (optional). The label…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
A very useful tool, when you have to exchange strings on many guitars Nothing special about the print. Standard PLA, Standard Settings. Used Brim, but not sure if it's needed. Found at https://www.thingiverse.com/thing:2842644
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
Drill Bit Sharpener for Dremel with true Relief Angle. This jig is using a Dremel Cutting Disk for Sharpening. The 2 Parts are held together with a M3 Screw and Nut.
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
Organise your pockets with a minimalist EDC bit driver/screwdriver Bit driver with internal storage for 6 standard 1/4" bits. Knurling for grip Option to add 5x2mm magnet to retain the driver bit in use UPDATED 9/2/21: Fixed thread…
Print approx. €3.09–€3.78 excl. taxPreliminary estimate for one variant
Description: This bit tool is so compact that it can be used in the tightest corners. There’s never too little space for working with it. It is designed for a hex bit with a width of 6.3 mm (approximately 0.24 inches). According to…
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
These are 2 different fictional articulated trilobite models. They are variations on my original trilobite bug thing with a bit more detail. They print well in a resin printer but do not scale them down less than 40% and wash the uncured…
Print approx. €2.10–€2.56 excl. taxPreliminary estimate for one variant
Guitar string winder drill bit (standard 1/4 inch) for use with accu drills / screwdrivers. The included f3d file uses user parameters if you need to adjust anything.
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
Voroni Rabbit Hey maker! 👋 I took a rabbit model and applied a Voronoi pattern – lots of fun! Features: Unique Voronoi design for a stylish look. Perfect as a desk decoration, gift, or display piece. Printing Tips: PLA or PETG recommended…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
Ich musste meine losen Sechskantschraubenbits organisieren. Deshalb entwickelte ich eine Box zum Sortieren von allen Schrauberbits. Diese Schraubendreher-Bit-Box kann im Deckel 100 kurze Bits aufnehmen. Im hinteren Bereich nochmals 40…
Print approx. €4.68–€5.72 excl. taxPreliminary estimate for one variant
Holder for spade bits up to ~1" compatible with the popular Gridfinity organization system. I have designed different models for a variety of drill sets: https://www.printables.com/social/175706-aaronoaks/collections/313836 More details…
Print approx. €3.53–€4.32 excl. taxPreliminary estimate for one variant
Update: STL now available , I recommend to print the gcode as it is optimized but if you can't print the gcode you can load the STL in your slicer and try this way. I also add a 3mf with the settings to print it from the orca slicer.…
Print approx. €2.08–€2.55 excl. taxPreliminary estimate for one variant
Holder for Ryobi drill bit collection compatible with the popular Gridfinity organization system. I have designed different models for a variety of drill bit sets: https://www.printables.com/social/175706-aaronoaks/collections/313836 More…
Print approx. €8.73–€10.67 excl. taxPreliminary estimate for one variant
Ever wanted to Rock your Crocs? No? Me neither. Well, now you can anyway.
Print approx. €3.54–€4.32 excl. taxPreliminary estimate for one variant
Use Case : Printed at 101% scale to avoid any threading issues with my Dremels. Printed all four versions of the sharpener and was able to thread onto my Dremels without any clean-up or post-processing. Accessories : Dremel Lite 7760 -…
Print approx. €10.70–€13.08 excl. taxPreliminary estimate for one variant
I made the base of the ears stronger and enlarged them. I smoothed out the back of the nose and enlarged it. NOSE Infill 20% Supports: yes 0.2 quality PETG or PLA Filament EARS Infill 20% Supports: yes 0.2 quality PETG or PLA Filament
Print approx. €1.15–€1.40 excl. taxPreliminary estimate for one variant
Use the included 360 emojis on your Crocs to customize them (jibbitz)! Press “Download STL” to find them all. If an emoji is missing or you need different sizes, you can easily create it using the makerworld customizer ! Or the included…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Drill Bits Holder Holder for a total of 23 drill bits with a size from 1 mm to 12 mm in 0.5 mm steps. The holder can be mounted on a wall with 2 countersunk screws. --- Bohrer-Halterung Halterung für insgesamt 23 Bohrer mit einer Größe…
Print approx. €8.25–€10.08 excl. taxPreliminary estimate for one variant
This organizer holds 4 sets of 12 hex bits. 3 rows are .875" deep for extended length bits, and 1 row is .375" deep for shorter bits. Two model versions are available, with and without labels. I chose to fill them with the following bit…
Print approx. €6.59–€8.06 excl. taxPreliminary estimate for PETGSource material: PET
I designed a case to hold every (currently) available screwdriver bit from lttstore.com (with the exception of the bits you store in the regular-sized screwdriver). This case holds 60 20mm bits, AKA the five additional bit sets you can…
Print approx. €6.83–€8.35 excl. taxPreliminary estimate for one variant
Join the E-Nable association and offer a 3D printed hand to children! Rejoignez l'association E-Nable et offrez une main imprimée 3D aux enfants! https://e-nable.fr/…
Print approx. €4.95–€6.06 excl. taxPreliminary estimate for PETGSource material: PET
Holder for collection of countersink bits compatible with the popular Gridfinity organization system. I have designed different models for a variety of drill sets: https://www.printables.com/social/175706-aaronoaks/collections/313836 More…
Print approx. €4.81–€5.88 excl. taxPreliminary estimate for one variant
I based the design on a model by georgeprout on thingiverse - I added space for two more bits Original stl and SCAD file here: https://www.thingiverse.com/thing:4395136 This is a bit holder for 6 standard quarter-inch bits for a DeWalt…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
My DeWalt drill is so much better than the cheap one I had before, with one exception, there's no built in place to store the Phillips hex bit! 3D printing to the rescue! I'm not sure if this is a standard interface shared with other…
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of figterk 's model to be able to use any rigid filament for those who don't have any flexible ones. I used the Gridfinity compatible model from DSwanlund for the dimensions. The bit holder fits right into the case, but…
Print approx. €3.34–€4.09 excl. taxPreliminary estimate for one variant
Features Highest quality mesh you'll find; no unbaked-normal-maps nonsense. Details are embossed to match the game accurately, and better than even the best paid model from elsewhere ;-) Battery cartridge holds 2x AAA batteries and your…
Print approx. €7.65–€9.35 excl. taxPreliminary estimate for one variant
Features Holds 56 standard bits + 9 Long ones (my kit has 52+4, so there are slots to spare) Holds the magnetizer/demagnetizer thingy Has a small pocket for carrying miscellaneous items, plus 7 more slots in the lid, where you can put…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
1-13 mm drill bit holder A standard set of 25 drill bits, size : 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5 and 13 mm. The drill bit holder has a 8° angle, which makes it easy to…
Print approx. €11.29–€13.80 excl. taxPreliminary estimate for one variant
Bit holder that leverages the following rubber box: https://www.aliexpress.com/item/1005005215189236.html
Print approx. €3.19–€3.90 excl. taxPreliminary estimate for PETGSource material: PET
Drill Bit Ballerina. You spin me right round baby right round like a Ballerina… baby. Yea... This is a terrible idea. Probably dangerous. This Ballerina is going to take your eye out.
Print approx. €1.15–€1.40 excl. taxPreliminary estimate for one variant
Hex bit holder Print standing with 10% gyroid/grid infill, and grid support from build plate only. The hex bit holder couples with the attachment plate module , print one of each and you have what you need to hang hex bits on…
Print approx. €5.49–€6.71 excl. taxPreliminary estimate for one variant
I wanted to present and share with you a project I worked on for E-Nable community that aim to make free and low-cost prosthetic upper limb devices for children and adults I 3D printed using Prusament PLA on my Prusa MINI+ and assembled…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
This is an addition to the bitcoin phrase stamper M8 . There a two different versions - for 12 or for 24 words. Stuff you will need: For the version with 12 words 1x M8 nut (DIN934) 1x M8x 30 bolt (DIN933) 12x M8.4x24x2 washers (DIN9021)…
Print approx. €1.37–€1.68 excl. taxPreliminary estimate for one variant
Perfect for screws op to 5mm Let me know if you want any adjustments !!
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
The LTT Store screwdriver is fantastic. However, the extra bit storage is not. This modular bit holder is the perfect companion to your LTT screwdriver! This design features several valuable features: Its modular/stackable design allows…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
Hi all lovers Easters time I created an Easter bunny wreath, for everyone who loves Easter. Ideal for decorating your front door. I hope you will like the model and it will decorate your home. Happy Printing :-)
Print approx. €2.19–€2.68 excl. taxPreliminary estimate for one variant
Every M18 Bit Holder I have found cover the cooling vents for the motor. So my design goes over the top, while still avoiding the cooling vents. I prefer this for the life of the drill.
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
About this Print The Nullbits Nibble is an extremely fun keyboard project to build. It yields a very competent, very customizable product. So to augment mine, I decided to make a tray, a screen holder so I could locate the screen up at…
Print approx. €0.31–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
All the parts are sized to print on a 200mm-class printer like an Ender 3. All parts should print without support except the top level of the tower, as it requires an insane amount of tree supports. I've included my gcode file for that…
Print approx. €14.14–€17.28 excl. taxPreliminary estimate for one variant
The excellent model from user "Kagarov" ( https://www.printables.com/model/41007-orbital-structural-printing-print-in-place-lamp ) now available for the proud owners of the PRUSA MINI !!! Its about 92% the size of the original. However a…
Print approx. €6.29–€7.69 excl. taxPreliminary estimate for one variant
A case for sorting all your drill bits. This was by the way my first design after I decided to take it back, and I made it with AutoCAD. Una caja para organizar tus brocas y machos de roscar. Este fue de hecho mi primer diseño después de…
Print approx. €1.92–€2.34 excl. taxPreliminary estimate for one variant
These are two remixes of the bit holder insert for the Miniware ES15 cases from 3DP-MAMSIH , 51m0 and PjotrStrog . The bit holder allows 55 bits to be accommodated in the case. The version with the magnetic/finger recesses holds 47 bits.…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for PETGSource material: PET
There are 2 files here, one for the 12V tool and one for the 20V tool. Both hold 3 hex bits. Printed on Prusa MK3 with PLA. No supports needed.
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
Exciting Update to Our Hex Bit Holder Design! In response to the community's feedback and my desire to enhance functionality, I've rolled out significant updates to our beloved hex bit holder. Here's what's new: Increased Capacity:…
Print approx. €7.58–€9.26 excl. taxPreliminary estimate for one variant
If you do not want to ditch your Dewalt drill bit case, then this custom 3x4 Gridfinity holder is for you!
Print approx. €7.05–€8.61 excl. taxPreliminary estimate for one variant
Spacing in the back is allowing other cables or cables coming from a hole in a Wall. No supports needed.
Print approx. €0.54–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
Simple and quick to print bit holder with space for 6x2mm round magnets. On the 11th layer (3.2mm) I added a pause to insert the magnets.
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
This is an addition to the bitcoin phrase stamper M10 . There a two different versions - for 12 or for 24 words. Stuff you will need: For the version with 12 words 1x M10 nut (DIN934) 1x M10x 40 bolt (DIN933) 12x M10.5x30 washers…
Print approx. €2.17–€2.66 excl. taxPreliminary estimate for one variant
Hex bit holder, gridfinity 1x2 bin. There are four deeper slots for those longer bits. Print with 10% gyroid/grid infill and no support (slicer might suggest to fix an error in the .stl if so then do that). It fits the Gridfinity…
Print approx. €2.41–€2.94 excl. taxPreliminary estimate for one variant
BitBox. Filament : Devil Design. Ocean Blue. ( 100% makita blue. ) PETG 0.20mm. 15% Infill : Gyroid. Nozzle : 230c. Bed : 90c. Support : None. BitBox. latch. Filament : Prusament. matte black. PETG 0.20mm. 15% Infill : Gyroid. Nozzle :…
Print approx. €9.44–€11.54 excl. taxPreliminary estimate for PETGSource material: PET
Hex bit holder, gridfinity 2x1 bin. Print with 10% gyroid/grid infill and no support, slicer might suggest to fix an error in the .stl (if so then let prusa slicer auto do that by a simple right-click). It fits the Gridfinity universe, it…
Print approx. €2.24–€2.73 excl. taxPreliminary estimate for one variant
Easter rabbit egg to decorate your table during the Easter holidays, printed in pla, without supports. you will find two sizes, one for the napkin and cutlery and the larger one to enrich the breakfast placemat.
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
hello everyone, I am new to 3d printing when I was browsing through the files I discovered gridfinity organizing system and decided to organize my toolbox. I have looked at models uploaded here for inspiration but decided to make my own…
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant
I took this model https://www.printables.com/model/168721-die-unendliche-geschichte-der-steinfresser from Chris_1978 And hollowed it out using openscad and added a plug so I could load it full of pennies for weight then make it into a…
Print approx. €27.00–€33.00 excl. taxPreliminary estimate for one variant
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
The Nullbits Tidbit is the 10-key companion to the Nullbits Nibble . It is also a fun little project that is massively configurable. Making it a 10-key is simply one possible configuration, but it's capable of quite a bit more, but I…
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of this design https://www.thingiverse.com/thing:4582540 . I modified the SCAD file to accommodate the Bosch Daredevil bits which are wider. Printed in 0.3mm layer height with no supports. Bit sizes for this print are: -…
Print approx. €2.70–€3.30 excl. taxPreliminary estimate for one variant
I combined the two bit holders made by Leatherman into one single piece that fits behind the tool in the pouch. The bits slide in and out ok, but the tolerances are tight enough so they don't fall out too easily. Some might need a good…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for PETGSource material: PET
I had a cheap (7.49) set of Harbor freight Titanium Hex Shank Drill Bit Set, 13 Pc. lying in the bottom of my tool box and decided the only way I was ever going to use them is if they where organized and in a case. So I got out the…
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant
Inspired by https://www.printables.com/model/394330-hex-bit-holder-removable
Print approx. €3.33–€4.07 excl. taxPreliminary estimate for PETGSource material: PET
A simple chip for shopping cards. Size is 25mm x2mm with btc simbol.
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
Just another case for the LTT screwdriver. I sliced the model with PrusaSlicer 2.5.0 without adjusting any setting and printed it with the inside of the case facing down. Added a version 2: added 2 pairs of magnets at the latch deepened…
Print approx. €7.12–€8.70 excl. taxPreliminary estimate for one variant
Morse Taper 3 (MK3/MT3) x 2 drill bit holder. The tool holder has a 8° angle, which makes it easy to reach the tooling. Print standing with 10% gyroid/grid infill and grid support from build plate only. The tool holder module couples with…
Print approx. €3.98–€4.86 excl. taxPreliminary estimate for one variant
Small 12mm spike to keep Rabbits and cat or other pets out of the garden or shed. I used 4 inch wire to hold them down. I printed with no skirt, 0.3mm layer height PLA. They are 150mm X 246mm X 12.5mm, only 25.28 g used.
Print approx. €2.28–€2.79 excl. taxPreliminary estimate for one variant
Lego Orcrist from “The Lord of the Rings.” You should size it up a little to make it fit better in the Lego hand. Orcrist, also known as "Orcrist the Goblin-cleaver," is a famous sword from J.R.R. Tolkien's Middle-earth legendarium,…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Summary Ultra-compact and magnetic bit holder for every application situation. The bit can be inserted easily and won't fall out. Given .3mf file accepts widely used 6x2mm round magnets. Accepts any other sized round magnet (up to 18mm…
Print approx. €0.59–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
Gedruckt mit Prusamet PETG, 0.2mm Schichthöhe, Stützen nur auf dem Druckbett, 3 vertikale Konturhüllen, 25% Füllung
Print approx. €0.95–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
9x hex bit peg board holder It's made for the taller hex bits that need deeper slots and wider space. Print standing with 10%-20% grid/gyroid infill and organic support from build plate only. The hex bit holder couples with the attachment…
Print approx. €4.62–€5.64 excl. taxPreliminary estimate for one variant
Perfect as a charming decoration, a sweet gift for animal lovers, or simply for joy. Key Features: Cute & Detailed Design: This little rabbit is simply irresistible with its plump features and expressive look. Easy to Print: The model is…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
Roger Rabbit from the movie “Who Framed Roger Rabbit” Single extruder multi-color print First layer: Blue (light blue) Second layer: Red Third layer: Yellow Fourth layer: Pink Fifth layer: Orange Sixth layer: White Seventh layer: Black By…
Print approx. €3.20–€3.91 excl. taxPreliminary estimate for one variant
BitBox-v2 Filament : GST3D. PLA + Army green. PLA : 0.20mm. 15% Infill : Gyroid. Nozzle : 215c. Bed : 60c. Support : None. BitBox. latch. Filament : GST3D. PLA + Black. PLA : 0.20mm. 15% Infill : Gyroid. Nozzle : 215c. Bed : 60c. Support…
Print approx. €9.69–€11.84 excl. taxPreliminary estimate for one variant
Angled Bit holder, two versions included. The fusion360 file has parameters to allow you to modify it for your own needs (change angle, size, rows, columns). I use this for my box with powertoolholders (see my other models/collections)…
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
This holder organizes, but still keeps the original case. It was made to allowing opening without pulling the whole case out of the holder.
Print approx. €9.86–€12.05 excl. taxPreliminary estimate for one variant
This is a bit holder for hex screwdriver bits for the battery of the Metabo Powermaxx cordless screwdriver. It may also fit for other Metabo tools using the same batteries. There are two versions, one is for the 4 Ah battery, the other…
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
I printed at 0.2mm. The bottom when printed, which becomes the top, is done with two layers at 45 degrees. I used generic white PLA, but anything that is slightly transparent should do. More of my builds at makies.au
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
Bit screw driver with print-in-place freewheel that uses a 3x3mm tubular neodymium magnet to hold the bit in place. There is an option for half length and normal length bits.
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
I made this to fit the impact drill bit and impact drill boxes to fit on my pegboard. It fits the Ryobi brand and the Walmart Hart brand which is made by the same parent company but I oversized it slightly so it should fit most brands of…
Print approx. €4.80–€5.87 excl. taxPreliminary estimate for one variant
Socket holder for 1/4" drive ratchet hex bits in a 1x2 gridfinity bin The socket holder uses a gridfinity 1x2 bin. Its made for hex sockets size 3, 4, 5, 6, 8 and 10 metric. Print it with 10% gyroid infill, no support. You can hang it on…
Print approx. €1.70–€2.08 excl. taxPreliminary estimate for one variant
See https://www.printables.com/model/220369-magnetic-bit-kit for details, this just adjusts the magnet pockets on the case for 6x2mm magnets.
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Use SVG to create custom Crocs Charms! Some earper inspired charms included. Use OpenSCAD or the online customizer feature here . Just print the names with a filament color change, clip them onto your crocs (they stay without glue) and…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
CZ (EN version follows): Na školním RoboKroužku si naše děti hrají s Elecfreaks Ring:Bit Car . Pro naše hrátky by se občas hodil “chňapák”. Chtělo to něco s minimem součástek, snadno tisknutelné, co by děti dokázaly bez potíží sestavit.…
Print approx. €0.54–€0.67 excl. taxPreliminary estimate for one variant
Adding to the skadis-system by Petri Damstén - this is a hexbit holder for the Stanley STHT070885 Multibit Screwdriver and nut setter. The hooks were created by Petri - which are required to attach the Stanley hexbit set to the skadis…
Print approx. €3.82–€4.67 excl. taxPreliminary estimate for PETGSource material: PET
Supports: Yes Resolution: 0.2 mm Infill: 15%-20% Brim: No Printed it with my Bambu Lab X1 I took the STL File of the Frog King cut off the crown and took the STL File of the Police Hat a put it on top. Made it in my CAD.
Print approx. €5.18–€6.33 excl. taxPreliminary estimate for one variant
Gridfinity bin for torx, allen bits and a 3/8" socket adapter The bit holder uses a gridfinity 1x2 bin. Holds nine larger 5/16" / ~8mm hex bits and one 3/8" socket to 5/16" (~8mm) adapter: T-55H, T50-H and T45-H (Torx - Tamperproof) 10mm,…
Print approx. €1.22–€1.50 excl. taxPreliminary estimate for one variant
If you're not using Dremel's EZ line of bits (formerly EZ-lock?), you're doing it wrong! Much easier to change bits, with a tool-less design. Dremel's EZ-Lock kit is a must-have, but the “removable bins” were poorly designed, wasting a…
Print approx. €9.68–€11.83 excl. taxPreliminary estimate for one variant
Armoured Transorbital Shuttle MKII Because there's no place like home, be it a Megalopolis with 80 billion souls, Hum'ahn, Alien, or otherwise. But something's got to get you out of orbit. And they are not landing a massive starship for…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
Ein Hase zum zusammenstecken.
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
A simple adapter to mount an IceTower cooler to a bitaxe. Print as oriented 12 walls minimum Feel free to use this adapter commercially, as long as you don't sell the files.
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
Hello, I have for you a Dwarf, gnome, hobbit - magician, mage :-). All you have to do is color it and it can decorate a shelf, or play roles in your board game, or diorama. My children love it and I always color all the figures, according…
Print approx. €2.26–€2.77 excl. taxPreliminary estimate for one variant
Hi For you who uses the amazing handsfree measurement system PCBite made by Sensepeek, I have made a protection cover for the SP-series of probes. SP10, SP100 and SP200 fits in the cover The covers can also be stacked by using the sleeve…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
Ideální lopatka na každodenní úklid klece. The ideal scoop for daily cleaning of the cage.
Print approx. €2.34–€2.87 excl. taxPreliminary estimate for one variant
5 min design, replacement for broken one I Suggest use of PETG and infill 40%
Print approx. €5.71–€6.98 excl. taxPreliminary estimate for PETGSource material: PET
![Bosh Daredevil Standard Spade Bit Holder/Rack/Storage [remix]](https://media.printables.com/media/prints/64459/images/671906_f394a1f0-88ec-49b4-ac5c-022447dab972/2021-04-22-072946.jpg)
