Bottle Cutter with variable cutting guide, no blades
Two versions for long or short screws, the hole for the rod is 6mm. 5 top and bottom, 3 walls, 30% gyroid, no supports.
- Downloads
- 6,252
- Likes
- 650
- Rating
- 5
597 models
Two versions for long or short screws, the hole for the rod is 6mm. 5 top and bottom, 3 walls, 30% gyroid, no supports.
This modular scraper is designed especially for 3D printer bed cleaning – perfect for removing filament residue, glue, or adhesion products from the build surface. It can be used with a standard Stanley blade or with various 3D‑printed…
A useful tool for removing prints from the bed with interchangeable 3D printable blades for when one eventually wears out. You can print the body in either PLA or PETG, however for the blade PLA is highly reccomended. To install the…
Multicolour keychain remix of the Blades of Chaos by Thinkibot on Thingiverse The 3mf is compatible with Bambu Studio. There's a bloody and non-bloody version inside the 3mf. Filaments used: eSUN PLA+: Fire Engine Red, Black eSUN silk…
This edge banding trimmer is a lifetime tool that works pretty well. The tool make a perfect trim in seconds, is Very stable, especially on starting. You can reverse the blade when dulled. The trimmer allows up to 4mm thick banding. The…
Painted by Sarah Wade These swords are replicas of the sword wielded by Kratos from god of war. They print in 7 part and has a hole for a 5mm rod to help them align and makes the swords strong. All the detail, like the cracks is actual…
This filament cutter was originally designed for the Qidi X-plus 3. Although I don't have an X Max 3, others have said it works perfectly. If you have the Smart 3 let me know if it fits. No more disconnecting tubes and reaching for snips…
This is the final version of a bed scraper that evolved from a much simpler model I designed years ago. I created it by combining features from several other models I found online, but none of them included everything I needed. It has…
EDIT: I previously uploaded the wrong starter interface file, it's been fixed This is a VERY high RPM Metal Fight Beyblade launcher that I designed. It can and will cause irreparable harm to you, your possessions, and anything in a 10ft…
This is a handle for plastic razor blades used for scraping labels or other gunk. I wanted a couple extra handles since the package supplied two. The blades should just snap into the holder. Please don't use for actual razor blades, it…
It has a hole for a 2mm motor shaft. It has 10 blades and a diameter of 80mm.
General This gives Lucky 13 the power of the God of War. Since there is a chain attached at the end of the blades, you assemble the pieces a little bit on Lucky 13's hands. It's simple enough to slide the blade on the top of the hand, and…
10 slot blade holder for Andis clippers. For Pet Groomers, Barbers, Stylists, Cosplay costume makers and Crafters. Slots are sized to fit blades similar to sizes 000 or 3 1/2 (T blades will fit, but will knock into other blades. See…
No Supports!!
Please be aware, that these types of knives are prohibited in Canada. This is a minor remix of the trunnions which now include printed threads. There are 2 versions of the trunnions available. One set which looks similar to the originals,…
I always like a nice mechanism and with 3D printing you can create a lot. Based on some examples from the internet I have designed my own model. It was a bit of a hassle to get the dimension right but after the second print I was very…
Nothing broke on mine, but I hope these new blades will make it quieter. But after fitting the fan with the new blades I am not impressed. It is not significantly quieter, but now I know how to create a new set of blades ;-) Print…
This is a remix to fit a utility blade in the “Wrapping paper cutter” by Over_ I have tested Husky blades, and Milwaukee iron-carbide edge blades. The husky ones drop straight in, and the Milwaukee ones are a hair tight, but do fit. The…
Best printed on an SLA printer, it will not work well on a FDM style printer. found it best to support the model from the around the screw hole. Curing: start with 10 mins at 40 degrees celsius and adjust accordingly for you resin. the…
I did not print with supports but they may help. The propeller should make for longer flights. Enjoy!!!
LATEST MODEL Since 2025-07-13 I recommend using this model instead: Ultimate Magnetic Bed Scraper With Replaceable Blades This is a spatula for removing objects from the print bed, with easily replaceable printable blades. When one side…
The blades don't last long in the hands of a 6 year old, but with a little modification the blades are now removable! Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .2 mm Filament: Doesn't Matter…
I Loved @samsve_195241's Viking sword model, And I couldn't Find any collapsible Viking swords, so I took their model, scaled it up and added some collapsible blades from a different project! I'm sorry if the dimensions are off but it was…
Bendy PETG wiper blades for Pastamatic
Tossing used blades in the trash is really bad. Tossing them in this box, and then in the trash is much less bad. NOTE: The razor blade silhouette on top is a separate solid body within the mesh of the box, you can select it in the…
Holder design for a Mach3 razor and the expansion tray of extra razors. I printed this from another site download but the site has since gone down so I can't link the credit for the design.
Wegen het succes van mijn bootschroef met drie bladen heb ik er ook 1tje gemaakt met 5 bladen. Voor iedereen kan kan ik meerde of minder schroef bladen maken. Due to the success of my boat propeller with three blades, I also made one with…
DESIGN UPDATE 2023-11-30: I updated the design to accommodate additional brands of calipers, and to address the different manufacturing widths of different caliper blades, combined with the varying characteristics of 3D printers and…
This is a little 50mm (dia) x 60mm tall can for disposal of old/used hobby and utility/box-knife blades. It's sturdy, strong (even when printed in PLA), and printing it should be relatively quick and inexpensive. I had a growing pile of…
Total pack weight of <120 grams. Rock solid in ABS, other material mileage may vary Utilizes diablo 9 inch carbide tipped wood blades. May need to drill out retention hole in blade with other brands. Print Specs ABS .4mm nozzle .2mm layer…
I often used a single edge scraper like you can buy in the store to pry thin prints off my glass bed, after which I used a plastic scraper to completely remove the print. The disadvantage of such a knife is the blade thickness and the…
Replacement blades for the Durafly Auto g2 V2. The blades are designed to be printed in 3 pieces with ColorFabb LW-pla (regular PLA may also work). Print vertically with no supports, no infill, using the supplied config file. I found that…
print one by one in the vase mode, set layer width to 0.9mm, 1 wall (vase mode default) Replaceable Curved Blades for Collapsing Retractable Katana (Rengok, Tanjiro and similar):…
To repair a decorative wind turbine that runs on solar energy, print in 0.2 mm layers and infill 15%. The motor axis has a diameter of 2 mm
A remix of spingoogL's toroidal propeller script. The 3mf file has coloured edges. This was made to fit tightly on a 1.4-mm axle.
Wrapping paper cutter with an ordinary Snap-Off Utility Knife (9 mm) Bring the paper cutter flush with the roll, gently press together so that the blade goes through the paper and simply pull (push) along the roll. The blade is easy to…
I created this toroidal 6 blades fan for my old fan to try to recover it and use it on my pc and awesome,it works very well and the angle of blades are perfectly printable without any problems,I printed the fan with PLA
Based on some inspiration from the internet I have designed an iris mechanisme with 5 blades. The previous iris mechanism had 3 blades and had a different mechanism. https://www.printables.com/model/270201-iris-mechanism-based-on-3-blades…
For assembly, you need 2x M3x4 mm bolts and 2x M3 nuts. Printing without supports
For those of you who do not always want to use a metal blade on your PEI sheets, many people use plastic razor blades. This is designed to fit the printable elegoo scraper. It is a little longer than the metal blade from Elegoo because I…
New forearms for the Dummy 13!
I Like Fun Knives. and this is fun to play with..... Which I should state. this is not a TOY. So handle with care and operate at own risk. This only needs 1 screw, a Ø3x9mm self-tapping screw. that goes in the positioner trunnion. Print 1…
THE DISC Bed Scraper with Replaceable Blades Quickly printed Blades, best printed in PETG, ABS/ASA Knobs can be printed in any material in your favorite colors.
Update: I have uploaded 2 new versions of the pommel top after feedback. The regular pommel top is 0.2mm bigger diameter then the grip and the looser version is 0.4mm larger. Yet another master sword. I know. This one was a fun project to…
The original design by @Magmabow is a fantastic design but i had trouble printing it with my 0.6mm nozzle. as such, this project was born. Includes a slide safety. Uses M3x8 screws and nuts (x2). no glue required.
Ersatzmesser Ersatzklingen Für STIHL FSA45 Polycut 2-2 / Replacement blades for STIHL / Stihl Trimmer Blades
Wegen het succes van mijn bootschroef met drie bladen heb ik er ook 1tje gemaakt met 4 bladen. Due to the success of my boat propeller with three blades, I also made one with 4 blades.
1 x 1 x 1 Gridfinity Holder for the Milwaukee FASTBACK 6-In- 1 Folding Utility Knife and Extra Blades. Includes glue fit holes for 6x2mm magnets and screws. May fit other folding utility knives. Made with the Gridfinity Fusion 360 Addon…
Replacement blades, in the style of the T33. I'm not sure about the size of the hub at all.
Replacement blades, in the style of the T33.
These are wind turbine blades designed to be used with small motors with 2 mm shafts. Specifications Hub Radius: 12.5 mm Shaft Hole Radius: 2.15 mm (should fit 2 mm shafts nicely) Blade Length: 73.95 mm (excluding hub) Blade Width: 23.83…
An old design I made in High School! From Thingiverse: This is my personal rendition of what I think Cayde-6's hunter knife would look like. I have named it the "Ace of Blades". Enjoy! 1:1 Scale Category: 3D Printing
Instructions for printing: Layer height: 0.08 - 0.15 50% of fill, to make it heavier and more confortable No supports required Hope you enjoy and any suggestions or mods you want me to do, just ask me :)
The original Worx cutting disc size is 145mm, with original blades the full cutting width is 175mm. There are other versions around but mostly for older Landroids. I wanted to create my own and also make some changes to the original…
Holder design for a Gillette Fusion5 razor and the cartridge refill case
Remix of WinterHawk904's model, separated into blade, grip, and ring for easier single-color printing or printing on smaller beds. Added indexing holes between each part to make gluing easier. Also modified the spade logo on the blade to…
Bed Scrapper w/ Replaceable Blades: Tired of reprinting a whole bed scrapper when the edge gets worn? Just print another blade! A practical, fast and environmental solution! Print time on the blade is only 9 minutes ! A multipurpose…
I've made a lot of fans and compressors but each time I've re-built the code for the blades from scratch and it's annoying. This is my new generic code that I'm going to use from now on so I'm sharing in case it helps anyone else. This is…
Trays were designed to with this hobby knife kit in mind. Just like the original model this was inspired from you need magnetic strip like this . Printed on an MK3s with 0.6mm nozzle 10% infill and 0.3mm layers
The model is slightly longer than the real Blades of Chaos, with the model coming in at ~28 in Just like my previous Draupnir Spear, this model is also fully 3D printed and involves threads in the handle, and the blade is glued with the…
Stihl Trimmer Blades Replacement blades for Stihl 4 blade trimmer head. I offset the blade to print without supports. So far, I have only printed these in PLA but I'm sure they would be better in nylon or something more durable. The white…
A simple 3D printed TPU fixture that lets you re-sharpen Luba Automower blades at the correct angle — instead of throwing them away and buying new ones. The jig holds the blade at ~12° per side (~24° inclusive), which matches the factory…
I was always driven crazy by how fast the precision razors dull out after a single use, so I designed a razor with replaceable blades to solve this problem. I mainly use these to line up my mustache and the cheek line of my beard, but…
In een vroegere post heb ik een rechtse geplaatst, na aanvraag een linkse nu met tekening en afmetingen. In an earlier post I placed a right one, after request a left one now with drawing and dimensions. Ludo
Object description: Grinding fixture for resharpening a Husqvarna Lawnmover Saftey Blade, alternative blades and similar blades for other electric lawnmover types. You can save about 8 Euro = 8 Dollar (at the time of publishing) per…
Smurf, Smurfette, Papa Smurf Cokkie Cutters Stamps and Blades
Ik heb de bootschroeven wat kleiner gemaakt, 60mm doormeter en 30mm hoog. Voor een as van 2mm, er zitten ook 2 gaatjes in om de as mechanisch vast te zetten. I made the boat propellers a bit smaller, 60mm in diameter and 30mm high. For a…
Print in PETG, 0.2mm layer height, no support required. Press fits nicely. Do this mod at your own risk. :) (Optional but recommended) Carefully push the fan blades from both sides to remove the fan blade rotor from the casing. Cut all…
Can hold 100 blades comfortably and approximately 160, pressed together. Ideal for storing big blade sampler packs in orderly fashion in your bathroom cabinet. Lid is just goes on top, keep it on with a rubber band if needed. Printed with…
Its a simplified version of the Blades of Chaos from God of War Ragnarok game for the popular dummy 13 toy. Printing at 150% is recommended for enhanced handle durability. I printed it in two colors with a single filament change to…
This is a replacement blade for Ryobi 18V ONE+ Trimmer. A little longer, thicker and lasts longer than original blade. Original ones shatter when I accidentally touch a fence or a tree with a trimmer, 3D-printed ones just chip off a…
This is a work in progress for the PARKSIDE® Mower robot smart PMRDA 20-Li A1, 20 V This cutting disc allows to double the amount of blades on the mower. I wanted to see how this behave. Hence I decided to build my own. I need to buy…
Meant for Beyblade X from what Leftburst said
This 3D printed turbine features : Full variable pitch control Huge size 1200mm blades 2700mm wind turbine Includes 6 blades for improved low wind performance ( RPM monitoring Supports a lot of generators/motor types Has a slip ring to…
Haven't tested yet. Created blades to sit at about 60 degree open inside for more realistic look. Added a touch jolleos design to jake of all trades design. The thought is to superglue my designed blades into place. Category: 3D Printer…
A container to safely dispose of double edge razor blades. Print settings Material: PETG Layer height: 0.20 mm No supports. Notes Print upside down with the one-way blade slot on the print bed.
Description As Mammotion's genuine cutting disk has been designed for injection molding, it is not optimized for 3D prints. So, I redesigned it, with 3D printability in sight. It has 6 blades instead of 4 and a protection cover, to keep…
Lid for the 10 slot blade holder for Andis clippers: ( https://www.printables.com/model/208188-clipper-blades-holder-pet-grooming-barbers-stylist/files ). For Pet Groomers, Barbers, Stylists, Cosplay costume makers and Crafters. (T blades…
Since I wasn't able to find any model that fits on the stock ender 3 fan, I've designed this model to replace the blades of the stock fan, it fits with pressure and works pretty well. Just be sure to rip everything from the broken blades…
Slice the STL file yourself depending your filament. 10 % infill max.
version #1 is here: https://www.printables.com/model/233942-pocket-scalpel-knife-folding-scalpel-knife-v1-for- there are two versions for different blades: (A) for numbers: 9, 10, 10A, 11, 11K, 12, 13, 14, 15, 15B, 15C, 16, 17, etc.. (B)…
This model is compatible with the lego system.
Thick blades model: strong Thin blades model: more aero, slightly better performance, but weaker I used PETG on the strong model, and tried CF nylon for the thin version. Both held up fine at maximum speed. Other materials might work too,…
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
Inspired by the various toroidal versions floating around, I wanted to make one myself, and swept the blades back 30 degrees... It came out pretty well, and cuts water nicely. sized for a "4 mm flexible drive shaft" that has M4 thread on…
This is a scraper that uses replaceable dual sided plastic blades readily available on Amazon (search for: “Sticker Remover Plastic Blade 100 PCS”). The blades come in a pack of 100 for about $6-9. Which in the long run is a much better…
Little container for CriCut blades (Maker 3) No extra parts needeed To buy blades i recomend: https://s.click.aliexpress.com/e/_oEYKBCK https://s.click.aliexpress.com/e/_oEYKBCK Deep Cut: https://s.click.aliexpress.com/e/_ooMSkxy
I couldn't find a suitable box for reciprocating saw blades, so I made one myself. The box is available with and without logo (Bosch). Suitable for saw blades from 100 to 250mm length, increments 50mm The hinges are designed so that…
spare part blades for the 6inch neca predator for best results print with resin have fun :)
Cutting disc 6 blades for landroid with adapters - Messerscheibe landroid mit 6 Messern und Adaptern If you like it --> press like it :-) Cutting disc with up to 6 blades, holes for thread insert which will be installed with a solder iron…
EDF printed because the original one was a little bit too small Internal dimension is 65mm instead of 64 to prevent rubbing but I see some space between wall and propeller, so I think it can be lowered about 0.5 and still fit without…
The 5 blades from the original desing were too long for the kids, so I changed the design a little bit. I only modified the original BLADE-2-VASE.stl so that this one is the last blade. As a result my sword uses only 4 blades. The…
A 3x1 Gridfinity block to hold the JerryRigEverything Razor Knife, the small plastic capsule with spare blades, and any accessories in the optional accessory slot. The knife should rest perfectly in only one orientation, ready to grab.…
This remix enables to mount a double-sided blade of a common handsaw in order to hold it with your hand. In comparison to the original thing the cutout for the blade is larger (18.75 mm, so two-sided blades will fit in), a third screw has…
This is the model i designed to enter the “Make it Fly” Contest. Its a helicopter toy, where you can push a collar up a spiral shaft, and send the helicopter flying. I designed a double helix, so you can put multiple propellers onto it…
the UVA 2026 hilt is on Cults here: https://cults3d.com/en/3d-model/various/hilt-for-curved-collapsing-uva-2026-sabre-with-removable-blades the UVA 2025 hilt (blue in pictures) is on Cults here:…
Try to make it from a strong filament, 4+ perimeter and 50%+ infill! I made it from PETG @ 230C, part fan turned off to get better layer adhesion. The blade is flat, not simmetric for better bed adhesion.
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
Here's my take on the Flaming Bladespinner monster from Frosthaven! I printed it in two halves, so that no support would be required. I put a key and slot in that version to help line it up, but depending on your first layer squish you…
Removed the guard from this model : https://www.printables.com/model/441218-collapsing-dagger-removable-blades